Commit fec1878fe9 caused a regression in
which contiguous blocks being allocated to the end of an extent were
getting a new extent created. This typically results in files entirely
made up of 1-block extents even though the blocks are contiguous on
disk.
Apparently grub doesn't handle a jfs file being fragmented into too many
extents, since it refuses to boot a kernel from jfs that was created by
the 2.6.30 kernel.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Reported-by: Alex <alevkovich@tut.by>
When porting blktrace to tracepoints, we changed to trace/block.h
for trace prober declarations.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
btrfs assigns this bdi to all inodes on that file system, so make
sure it's registered. This isn't really important now, but will be
when we put dirty inodes there. Even now, we miss the stats when the
bdi isn't visible.
Also fixes failure to check bdi_init() return value, and bad inherit of
->capabilities flags from the default bdi.
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch (as1239) updates the kernel's treatment of Unicode. The
character-set conversion routines are well behind the current state of
the Unicode specification: They don't recognize the existence of code
points beyond plane 0 or of surrogate pairs in the UTF-16 encoding.
The old wchar_t 16-bit type is retained because it's still used in
lots of places. This shouldn't cause any new problems; if a
conversion now results in an invalid 16-bit code then before it must
have yielded an undefined code.
Difficult-to-read names like "utf_mbstowcs" are replaced with more
transparent names like "utf8s_to_utf16s" and the ordering of the
parameters is rationalized (buffer lengths come immediate after the
pointers they refer to, and the inputs precede the outputs).
Fortunately the low-level conversion routines are used in only a few
places; the interfaces to the higher-level uni2char and char2uni
methods have been left unchanged.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
utf8_wcstombs forgot to include one-byte UTF-8 characters when
calculating the output buffer size, i.e., theoretically, it was possible
to overflow the output buffer with an input string that contains enough
ASCII characters.
In practice, this was no problem because the only user so far (VFAT)
always uses a big enough output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When utf8_wcstombs encounters a character that cannot be encoded, we
must not decrease the remaining output buffer size because nothing has
been written to the output buffer.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In many SoC implementations there are hardware registers can be read or
write only. This extends the debugfs to enforce the file permissions for
these types of registers by providing a set of fops which are read or
write only. This assumes that the kernel developer knows more about the
hardware than the user (even root users) -- which is normally true.
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix an error in debugfs_create_blob's docbook description
It cannot actually be used to write a binary blob.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
debugfs: dont stop on first failed recursive delete
While running a while loop of removing a module that removes a debugfs
directory with debugfs_remove_recursive, and at the same time doing a
while loop of cat of a file in that directory, I would hit a point where
somehow the cat of the file caused the remove to fail.
The result is that other files did not get removed when the module
was removed. I simple read of one of those file can oops the kernel
because the operations to the file no longer exist (removed by module).
The funny thing is that the file being cat'ed was removed. It was
the siblings that were not. I see in the code to debugfs_remove_recursive
there's a test that checks if the child fails to bail out of the loop
to prevent an infinite loop.
What this patch does is to still try any siblings in that directory.
If all the siblings fail, or there are no more siblings, then we exit
the loop.
This fixes the above symptom, but...
This is no full proof. It makes the debugfs_remove_recursive a bit more
robust, but it does not explain why the one file failed. There may
be some kind of delay deletion that makes the debugfs think it did
not succeed. So this patch is more of a fix for the symptom but not
the disease.
This patch still makes the debugfs_remove_recursive more robust and
until I can find out why the bug exists, this patch will keep
the kernel from oopsing in most cases. Even after the cause is found
I think this change can stand on its own and should be kept.
[ Impact: prevent kernel oops on module unload and reading debugfs files ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is the possiblity of a memory leak if a page is allocated and if
sysfs_getlink() fails in the sysfs_follow_link.
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kill off obscure macro 'PROC' of NFSv2&3 in order to make the code more clear.
Among other things, this makes it simpler to grep for callers of these
functions--something which has frequently caused confusion among nfs
developers.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
There's no need to check host_err >= 0 every time here when we could
check host_err < 0 once, following the usual kernel style.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a relatively self-contained piece of code that handles a special
case--move it to its own function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Updating last_ino and last_dev probably isn't useful in the !use_wgather
case.
Also remove some pointless ifdef'd-out code.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv3 and above can use unstable writes whenever they are sending more
than one write, rather than relying on the flaky write gathering
heuristics. More often than not, write gathering is currently getting it
wrong when the NFSv3 clients are sending a single write with FILE_SYNC
for efficiency reasons.
This patch turns off write gathering for NFSv3/v4, and ensures that
it only applies to the one case that can actually benefit: namely NFSv2.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
commit_fs_roots skips updating root items for fs trees that aren't modified.
This is unsafe now that relocation code modifies root item's last_snapshot
field without modifying corresponding fs tree.
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In ocfs2_add_branch, we use the rightmost rec of the leaf extent block
to generate the e_cpos for the newly added branch. In the most case, it
is OK but if the parent extent block's rightmost rec covers more clusters
than the leaf does, it will cause kernel panic if we insert some clusters
in it. The message is something like:
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: bug expression:
le16_to_cpu(el->l_next_free_rec) >= le16_to_cpu(el->l_count)
(7445,1):ocfs2_insert_at_leaf:3775 ERROR: inode 66053, depth 0, count 28,
next free 28, rec.cpos 270, rec.clusters 1, insert.cpos 275, insert.clusters 1
[<fa7ad565>] ? ocfs2_do_insert_extent+0xb58/0xda0 [ocfs2]
[<fa7b08f2>] ? ocfs2_insert_extent+0x5bd/0x6ba [ocfs2]
[<fa7b1b8b>] ? ocfs2_add_clusters_in_btree+0x37f/0x564 [ocfs2]
...
The panic can be easily reproduced by the following small test case
(with bs=512, cs=4K, and I remove all the error handling so that it looks
clear enough for reading).
int main(int argc, char **argv)
{
int fd, i;
char buf[5] = "test";
fd = open(argv[1], O_RDWR|O_CREAT);
for (i = 0; i < 30; i++) {
lseek(fd, 40960 * i, SEEK_SET);
write(fd, buf, 5);
}
ftruncate(fd, 1146880);
lseek(fd, 1126400, SEEK_SET);
write(fd, buf, 5);
close(fd);
return 0;
}
The reason of the panic is that:
the 30 writes and the ftruncate makes the file's extent list looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 280 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
Now another write at 1126400(275 cluster) whiich will write at the gap
between 271 and 280 will trigger ocfs2_add_branch, but the result after
the function looks like:
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 280 86183
1 271 0 143592
So the extent record is intersected and make the following operation bug out.
This patch just try to remove the gap before we add the new branch, so that
the root(branch) rightmost rec will cover the same right position. So in the
above case, before adding branch the tree will be changed to
Tree Depth: 1 Count: 19 Next Free Rec: 1
## Offset Clusters Block#
0 0 271 86183
SubAlloc Bit: 7 SubAlloc Slot: 0
Blknum: 86183 Next Leaf: 0
CRC32: 00000000 ECC: 0000
Tree Depth: 0 Count: 28 Next Free Rec: 28
## Offset Clusters Block# Flags
0 0 1 143368 0x0
1 10 1 143376 0x0
...
26 260 1 143576 0x0
27 270 1 143584 0x0
And after branch add, the tree looks like
Tree Depth: 1 Count: 19 Next Free Rec: 2
## Offset Clusters Block#
0 0 271 86183
1 271 0 143592
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (22 commits)
nilfs2: support contiguous lookup of blocks
nilfs2: add sync_page method to page caches of meta data
nilfs2: use device's backing_dev_info for btree node caches
nilfs2: return EBUSY against delete request on snapshot
nilfs2: modify list of unsupported features in caveats
nilfs2: enable sync_page method
nilfs2: set bio unplug flag for the last bio in segment
nilfs2: allow future expansion of metadata read out via get info ioctl
NILFS2: Pagecache usage optimization on NILFS2
nilfs2: remove nilfs_btree_operations from btree mapping
nilfs2: remove nilfs_direct_operations from direct mapping
nilfs2: remove bmap pointer operations
nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
nilfs2: move get block functions in bmap.c into btree codes
nilfs2: remove nilfs_bmap_delete_block
nilfs2: remove nilfs_bmap_put_block
nilfs2: remove header file for segment list operations
nilfs2: eliminate removal list of segments
nilfs2: add sufile function that can modify multiple segment usages
...
Move address display into a new function and display the scopeid as part
of the address in /proc/mounts.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In case of an error returned by file_dirty() 's' is not freed as the cleanup
path is skipped.
Reported by Coverity.
Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The VFS handles updating ctime, so we don't need to update the inode's
ctime in ext4_splace_branch() to update the direct or indirect blocks.
This was harmless when we did this in ext3, but in ext4, thanks to
delayed allocation, updating the ctime in ext4_splice_branch() can
cause the ctime to mysteriously jump when the blocks are finally
allocated.
Thanks to Björn Steinbrink for pointing out this problem on the git
mailing list.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On systems where CONFIG_SHMEM is disabled, mounting tmpfs filesystems can
fail when tmpfs options are used. This is because tmpfs creates a small
wrapper around ramfs which rejects unknown options, and ramfs itself only
supports a tiny subset of what tmpfs supports. This makes it pretty hard
to use the same userspace systems across different configuration systems.
As such, ramfs should ignore the tmpfs options when tmpfs is merely a
wrapper around ramfs.
This used to work before commit c3b1b1cbf0 as previously, ramfs would
ignore all options. But now, we get:
ramfs: bad mount option: size=10M
mount: mounting mdev on /dev failed: Invalid argument
Another option might be to restore the previous behavior, where ramfs
simply ignored all unknown mount options ... which is what Hugh prefers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the mmap/truncate race that was fixed for delayed
allocation by merging ext4_{journalled,normal,da}_writepage() into
ext4_writepage().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It is possible to see buffer_heads which are not mapped in the
writepage callback in the following scneario (where the fs blocksize
is 1k and the page size is 4k):
1) truncate(f, 1024)
2) mmap(f, 0, 4096)
3) a[0] = 'a'
4) truncate(f, 4096)
5) writepage(...)
Now if we get a writepage callback immediately after (4) and before an
attempt to write at any other offset via mmap address (which implies we
are yet to get a pagefault and do a get_block) what we would have is the
page which is dirty have first block allocated and the other three
buffer_heads unmapped.
In the above case the writepage should go ahead and try to write the
first blocks and clear the page_dirty flag. Further attempts to write
to the page will again create a fault and result in allocating blocks
and marking page dirty. If we don't write any other offset via mmap
address we would still have written the first block to the disk and
rest of the space will be considered as a hole.
So to address this, we change all of the places where we look for
delayed, unmapped, or unwritten buffer heads, and only check for
delayed or unwritten buffer heads instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_mb_free_blocks() was using an "unsigned long" to
pass a block number; this will cause 64-bit block numbers to get
truncated on x86 and other 32-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Enhance the inode allocator to take a goal inode number as a
paremeter; if it is specified, it takes precedence over Orlov or
parent directory inode allocation algorithms.
The extents migration function uses the goal inode number so that the
extent trees allocated the migration function use the correct flex_bg.
In the future, the goal inode functionality will also be used to
allocate an adjacent inode for the extended attributes.
Also, for testing purposes the goal inode number can be specified via
/sys/fs/{dev}/inode_goal. This can be useful for testing inode
allocation beyond 2^32 blocks on very large filesystems.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of using a random number to determine the goal parent grop for
the Orlov top directories, use a hash of the directory name. This
allows for repeatable results when trying to benchmark filesystem
layout algorithms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We're running out of space in the mount options word, and
EXT4_MOUNT_ABORT isn't really a mount option, but a run-time flag. So
move it to become EXT4_MF_FS_ABORTED in s_mount_flags.
Also remove bogus ext2_fs.h / ext4.h simultaneous #include protection,
which can never happen.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This field can be very helpful when a system administrator is trying
to sort through large numbers of block devices or filesystem images.
What is stored in this field can be ambiguous if multiple filesystem
namespaces are in play; what we store in practice is the mountpoint
interpreted by the process's namespace which first opens a file in the
filesystem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can only fit 32 options in s_mount_opt because an unsigned long is
32-bits on a x86 machine. So use an unsigned int to save space on
64-bit platforms.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The EXT4_IOC_MOVE_EXT exchanges the blocks between orig_fd and donor_fd,
and then write the file data of orig_fd to donor_fd.
ext4_mext_move_extent() is the main fucntion of ext4 online defrag,
and this patch includes all functions related to ext4 online defrag.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
...to consolidate some logic used in more than one place.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
show_options is always called with the namespace_sem held. Therefore we
don't need to worry about the vfsmount being NULL, or it vanishing while
the function is running. By the same token, there's no need to worry
about the superblock, tcon, smb or tcp sessions being NULL on entry.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Identation got messed up when merging the current_umask changes with
the generic ACL support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix warnings about unitialized dquot variables by making sure
xfs_qm_vop_dqalloc touches it even when quotas are disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
configfs: Rework configfs_depend_item() locking and make lockdep happy
configfs: Silence lockdep on mkdir() and rmdir()
