While creating a uobject every create reaches a point where the uobject is
fully initialized. For ioctls that go on to copy_to_user this means they
need to open code the destruction of a fully created uobject - ie the
RDMA_REMOVE_DESTROY sort of flow.
Open coding this creates bugs, eg the CQ does not properly flush the
events list when it does its error unwind.
Provide a uverbs_finalize_uobj_create() function which indicates that the
uobject is fully initialized and that abort should call to destroy_hw to
destroy the uobj->object and related.
Methods can call this function if they go on to have error cases after
setting uobj->object. Once done those error cases can simply do return,
without an error unwind.
Link: https://lore.kernel.org/r/20200519072711.257271-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linux 5.7-rc6
Conflict in drivers/net/ethernet/mellanox/mlx5/core/steering/dr_send.c
resolved by deleting dr_cq_event, matching how netdev resolved it.
Required for dependencies in the following patches.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* branch 'mellanox/mlx5-next':
net/mlx5: Add support in forward to namespace
{IB/net}/mlx5: Simplify don't trap code
net/mlx5: Replace zero-length array with flexible-array
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.
When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:
* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x177405).
Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.org
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.
For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result. For connected QPs, the driver
sets the affinity of the xmit slave.
The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.
Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.com
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.
So let's separate creation of that QP type from the common flow.
Link: https://lore.kernel.org/r/20200427154636.381474-28-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of keeping special field to separate kernel/user create/destroy
flows, rely on existence of udata pointer. All allocation flows are
using kzalloc() and leave uninitialized pointers as NULL which makes
MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same.
Link: https://lore.kernel.org/r/20200427154636.381474-25-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QP type is stored in the IB/core QP struct, but it doesn't have all the
needed information, like internal QP type used in the driver itself.
Update mlx5_ib to have cached QP type which includes both IBTA and
Mellanox specific one.
Such change allows us to make even further cleanup of QP creation flow.
Link: https://lore.kernel.org/r/20200427154636.381474-21-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky says:
====================
This is first part of series which tries to return some sanity to
mlx5_ib_create_qp() function. Such refactoring is required to make
extension of that function with less worries of breaking driver.
Extra goal of such refactoring is to ensure that QP is allocated at the
beginning of function and released at the end. It will allow us to move QP
allocation to be under IB/core responsibility.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_ib_qp_refactor_1': (66 commits)
RDMA/mlx5: Process all vendor flags in one place
RDMA/mlx5: Return all configured create flags through query QP
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
RDMA/mlx5: Process create QP flags in one place
RDMA/mlx5: Delete create QP flags obfuscation
RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow
RDMA/mlx5: Remove second copy from user for non RSS RAW QPs
RDMA/mlx5: Move DRIVER QP flags check into separate function
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
RDMA/mlx5: Split scatter CQE configuration for DCT QP
RDMA/mlx5: Separate create QP flows to be based on type
RDMA/mlx5: Set QP subtype immediately when it is known
RDMA/mlx5: Avoid setting redundant NULL for XRC QPs
RDMA/mlx5: Prepare QP allocation for future removal
RDMA/mlx5: Perform check if QP creation flow is valid
RDMA/mlx5: Delete impossible GSI port check
RDMA/mlx5: Organize QP types checks in one place
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
create_flags is checked in too many places and scattered across all
the code, consolidate all the checks inside one function, so we will
be easily see the flow. As part of such change, delete unreachable code,
because IB/core is responsible sanitize the input.
Link: https://lore.kernel.org/r/20200427154636.381474-15-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
