h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If debug_regs.c is built with newer binutils, the resulting binary is "optimized"
by the assembler:
asm volatile("ss_start: "
"xor %%rax,%%rax\n\t"
"cpuid\n\t"
"movl $0x1a0,%%ecx\n\t"
"rdmsr\n\t"
: : : "rax", "ecx");
is translated to :
000000000040194e <ss_start>:
40194e: 31 c0 xor %eax,%eax <----- rax->eax?
401950: 0f a2 cpuid
401952: b9 a0 01 00 00 mov $0x1a0,%ecx
401957: 0f 32 rdmsr
As you can see rax is replaced with eax in target binary code.
This causes a difference is the length of xor instruction (2 Byte vs 3 Byte),
and makes the hard-coded instruction length check fail:
/* Instruction lengths starting at ss_start */
int ss_size[4] = {
3, /* xor */ <-------- 2 or 3?
2, /* cpuid */
5, /* mov */
2, /* rdmsr */
};
Encode the shorter version directly and, while at it, fix the "clobbers"
of the asm.
Cc: stable@vger.kernel.org
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Endianness issue in IPv4 option support in nft_exthdr,
from Stephen Suryaputra.
2) Removes the waitcount optimization in nft_compat,
from Florian Westphal.
3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from
Florian Westphal.
4) Memleak in chain binding support, also from Florian.
5) Simplify nft_flowtable.sh selftest, from Fabian Frederick.
6) Optional MTU arguments for selftest nft_flowtable.sh,
also from Fabian.
7) Remove noise error report when killing process in
selftest nft_flowtable.sh, from Fabian Frederick.
8) Reject bogus getsockopt option length in ebtables,
from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull arch/sh updates from Rich Felker:
"Cleanup, SECCOMP_FILTER support, message printing fixes, and other
changes to arch/sh"
* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
sh: landisk: Add missing initialization of sh_io_port_base
sh: bring syscall_set_return_value in line with other architectures
sh: Add SECCOMP_FILTER
sh: Rearrange blocks in entry-common.S
sh: switch to copy_thread_tls()
sh: use the generic dma coherent remap allocator
sh: don't allow non-coherent DMA for NOMMU
dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
sh: unexport register_trapped_io and match_trapped_io_handler
sh: don't include <asm/io_trapped.h> in <asm/io.h>
sh: move the ioremap implementation out of line
sh: move ioremap_fixed details out of <asm/io.h>
sh: remove __KERNEL__ ifdefs from non-UAPI headers
sh: sort the selects for SUPERH alphabetically
sh: remove -Werror from Makefiles
sh: Replace HTTP links with HTTPS ones
arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
sh: stacktrace: Remove stacktrace_ops.stack()
sh: machvec: Modernize printing of kernel messages
sh: pci: Modernize printing of kernel messages
...
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Fixes:
- Fixes for 'perf bench numa'.
- Always memset source before memcpy in 'perf bench mem'.
- Quote CC and CXX for their arguments to fix build in environments
using those variables to pass more than just the compiler names.
- Fix module symbol processing, addressing regression detected via
"perf test".
- Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
test' entry.
Improvements:
- Add script to autogenerate socket family name id->string table from
copy of kernel header, used so far in 'perf trace'.
- 'perf ftrace' improvements to provide similar options for this
utility so that one can go from 'perf record', 'perf trace', etc to
'perf ftrace' just by changing the name of the subcommand.
- Prefer new "sched:sched_waking" trace event when it exists in 'perf
sched' post processing.
- Update POWER9 metrics to utilize other metrics.
- Fall back to querying debuginfod if debuginfo not found locally.
Miscellaneous:
- Sync various kvm headers with kernel sources"
* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
perf ftrace: Make option description initials all capital letters
perf build-ids: Fall back to debuginfod query if debuginfo not found
perf bench numa: Remove dead code in parse_nodes_opt()
perf stat: Update POWER9 metrics to utilize other metrics
perf ftrace: Add change log
perf: ftrace: Add set_tracing_options() to set all trace options
perf ftrace: Add option --tid to filter by thread id
perf ftrace: Add option -D/--delay to delay tracing
perf: ftrace: Allow set graph depth by '--graph-opts'
perf ftrace: Add support for trace option tracing_thresh
perf ftrace: Add option 'verbose' to show more info for graph tracer
perf ftrace: Add support for tracing option 'irq-info'
perf ftrace: Add support for trace option funcgraph-irqs
perf ftrace: Add support for trace option sleep-time
perf ftrace: Add support for tracing option 'func_stack_trace'
perf tools: Add general function to parse sublevel options
perf ftrace: Add option '--inherit' to trace children processes
perf ftrace: Show trace column header
perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
perf ftrace: Factor out function write_tracing_file_int()
...
Daniel Borkmann says:
====================
pull-request: bpf 2020-08-15
The following pull-request contains BPF updates for your *net* tree.
We've added 23 non-merge commits during the last 4 day(s) which contain
a total of 32 files changed, 421 insertions(+), 141 deletions(-).
The main changes are:
1) Fix sock_ops ctx access splat due to register override, from John Fastabend.
2) Batch of various fixes to libbpf, bpftool, and selftests when testing build
in 32-bit mode, from Andrii Nakryiko.
3) Fix vmlinux.h generation on ARM by mapping GCC built-in types (__Poly*_t)
to equivalent ones clang can work with, from Jean-Philippe Brucker.
4) Fix build_id lookup in bpf_get_stackid() helper by walking all NOTE ELF
sections instead of just first, from Jiri Olsa.
5) Avoid use of __builtin_offsetof() in libbpf for CO-RE, from Yonghong Song.
6) Fix segfault in test_mmap due to inconsistent length params, from Jianlin Lv.
7) Don't override errno in libbpf when logging errors, from Toke Høiland-Jørgensen.
8) Fix v4_to_v6 sockaddr conversion in sk_lookup test, from Stanislav Fomichev.
9) Add link to bpf-helpers(7) man page to BPF doc, from Joe Stringer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During a perf-record, use the -ldebuginfod API to query a debuginfod
server, should the debug data not be found in the usual system
locations. If successful, the usual $HOME/.debug dir is populated.
Tested with:
$ find .
.
./ctags-debuginfo-5.8-26.fc31.x86_64.rpm
./usr
./usr/lib
./usr/lib/debug
./usr/lib/debug/.build-id
./usr/lib/debug/.build-id/ca
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d
./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug
./usr/lib/debug/usr
./usr/lib/debug/usr/bin
./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug
$ debuginfod -F .
...
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ]
$ find ~/.debug | grep ctags
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
$ rm -rf ~/.debug/ ; mkdir ~/.debug
$ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags
BUILD: Doing 'make -j8' parallel build
GEN tags
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ]
$ find ~/.debug | grep ctag
/home/jolsa/.debug/usr/bin/ctags
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf
/home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes
Note the 'debug' file is created in the last run.
Note that currently the debuginfo data are downloaded only on record path,
we still need add this support to perf build-id/report.. and test ;-)
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu
tracing buffer.
Committer testing:
Before running with this option:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
1408
1408
1408
1408
1408
1408
1408
1408
1408
#
Then, run:
# perf ftrace -m 2048K | head -10
2) | mutex_unlock() {
2) ==========> |
2) | smp_irq_work_interrupt() {
2) | irq_enter() {
2) 0.121 us | rcu_irq_enter();
2) 0.128 us | irqtime_account_irq();
2) 0.719 us | }
2) | __wake_up() {
2) | __wake_up_common_lock() {
2) 0.105 us | _raw_spin_lock_irqsave();
#
Now look at those tracefs knobs:
# find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat
2048
2048
2048
2048
2048
2048
2048
2048
2048
#
This should be similar to the -m option in the other perf tools, such as
'perf record', 'perf trace', etc.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-5-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds an option '-F/--funcs' to list all available functions to
trace, which is read from tracing file 'available_filter_functions'.
$ sudo ./perf ftrace -F | head
trace_initcall_finish_cb
initcall_blacklisted
do_one_initcall
do_one_initcall
trace_initcall_start_cb
run_init_process
try_to_run_init_process
match_dev_by_label
match_dev_by_uuid
rootfs_init_fs_context
$
Committer notes:
This is the same command line option and for the same purpose as in
'perf probe'.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '-g/-G' options have already implied function_graph tracer should be
used instead of function tracer. So we don't need extra option
'--tracer' in this case.
This patch changes the behavior as below:
- If '-g' or '-G' option is on, then function_graph tracer is used.
- If '-T' or '-N' option is on, then function tracer is used.
- The function_graph has priority over function tracer.
- The option '--tracer' only take effect if neither -g/-G nor -T/-N
is specified.
Here are some examples.
This will start tracing all functions using default tracer:
$ sudo perf ftrace
This will trace all functions using function graph tracer:
$ sudo perf ftrace -G '*'
This will trace function vfs_read using function graph tracer:
$ sudo perf ftrace -G vfs_read
This will trace function vfs_read using function tracer:
$ sudo perf ftrace -T vfs_read
Committer notes:
Using '-h -G' will tell what that option is about, so to further clarify
the above examples:
# perf ftrace -h -G
-G, --graph-funcs <func> Set graph filter on given functions
# perf ftrace -h -g
-g, --nograph-funcs <func> Set nograph filter on given functions
# perf ftrace -h -T
-T, --trace-funcs <func> trace given functions only
# perf ftrace -h -N
-N, --notrace-funcs <func> do not trace given functions
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200808023141.14227-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
Despite bpftool generating data section memory layout that will work for
32-bit architectures on user-space side, BPF programs should be careful to not
use ambiguous types like `long`, which have different size in 32-bit and
64-bit environments. Fix that in test by using __u64 explicitly, which is
a recommended approach anyway.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-10-andriin@fb.com
Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases
where it's impossible to deterimne the pointer size (no long type in BTF). In
cases where it's known, validate libbpf correctly determines it as 8.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com
With libbpf and BTF it is pretty common to have libbpf built for one
architecture, while BTF information was generated for a different architecture
(typically, but not always, BPF). In such case, the size of a pointer might
differ betweem architectures. libbpf previously was always making an
assumption that pointer size for BTF is the same as native architecture
pointer size, but that breaks for cases where libbpf is built as 32-bit
library, while BTF is for 64-bit architecture.
To solve this, add heuristic to determine pointer size by searching for `long`
or `unsigned long` integer type and using its size as a pointer size. Also,
allow to override the pointer size with a new API btf__set_pointer_size(), for
cases where application knows which pointer size should be used. User
application can check what libbpf "guessed" by looking at the result of
btf__pointer_size(). If it's not 0, then libbpf successfully determined a
pointer size, otherwise native arch pointer size will be used.
For cases where BTF is parsed from ELF file, use ELF's class (32-bit or
64-bit) to determine pointer size.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com
Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com
Add tests to directly accesse sock_ops sk field. Then use it to
ensure a bad pointer access will fault if something goes wrong.
We do three tests:
The first test ensures when we read sock_ops sk pointer into the
same register that we don't fault as described earlier. Here r9
is chosen as the temp register. The xlated code is,
36: (7b) *(u64 *)(r1 +32) = r9
37: (61) r9 = *(u32 *)(r1 +28)
38: (15) if r9 == 0x0 goto pc+3
39: (79) r9 = *(u64 *)(r1 +32)
40: (79) r1 = *(u64 *)(r1 +0)
41: (05) goto pc+1
42: (79) r9 = *(u64 *)(r1 +32)
The second test ensures the temp register selection does not collide
with in-use register r9. Shown here r8 is chosen because r9 is the
sock_ops pointer. The xlated code is as follows,
46: (7b) *(u64 *)(r9 +32) = r8
47: (61) r8 = *(u32 *)(r9 +28)
48: (15) if r8 == 0x0 goto pc+3
49: (79) r8 = *(u64 *)(r9 +32)
50: (79) r9 = *(u64 *)(r9 +0)
51: (05) goto pc+1
52: (79) r8 = *(u64 *)(r9 +32)
And finally, ensure we didn't break the base case where dst_reg does
not equal the source register,
56: (61) r2 = *(u32 *)(r1 +28)
57: (15) if r2 == 0x0 goto pc+1
58: (79) r2 = *(u64 *)(r1 +0)
Notice it takes us an extra four instructions when src reg is the
same as dst reg. One to save the reg, two to restore depending on
the branch taken and a goto to jump over the second restore.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718355325.4728.4163036953345999636.stgit@john-Precision-5820-Tower
Loads in sock_ops case when using high registers requires extra logic to
ensure the correct temporary value is used. We need to ensure the temp
register does not use either the src_reg or dst_reg. Lets add an asm
test to force the logic is triggered.
The xlated code is here,
30: (7b) *(u64 *)(r9 +32) = r7
31: (61) r7 = *(u32 *)(r9 +28)
32: (15) if r7 == 0x0 goto pc+2
33: (79) r7 = *(u64 *)(r9 +0)
34: (63) *(u32 *)(r7 +916) = r8
35: (79) r7 = *(u64 *)(r9 +32)
Notice r9 and r8 are not used for temp registers and r7 is chosen.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718353345.4728.8805043614257933227.stgit@john-Precision-5820-Tower
To verify fix ("bpf: sock_ops ctx access may stomp registers in corner case")
we want to force compiler to generate the following code when accessing a
field with BPF_TCP_SOCK_GET_COMMON,
r1 = *(u32 *)(r1 + 96) // r1 is skops ptr
Rather than depend on clang to do this we add the test with inline asm to
the tcpbpf test. This saves us from having to create another runner and
ensures that if we break this again test_tcpbpf will crash.
With above code we get the xlated code,
11: (7b) *(u64 *)(r1 +32) = r9
12: (61) r9 = *(u32 *)(r1 +28)
13: (15) if r9 == 0x0 goto pc+4
14: (79) r9 = *(u64 *)(r1 +32)
15: (79) r1 = *(u64 *)(r1 +0)
16: (61) r1 = *(u32 *)(r1 +2348)
17: (05) goto pc+1
18: (79) r9 = *(u64 *)(r1 +32)
We also add the normal case where src_reg != dst_reg so we can compare
code generation easily from llvm-objdump and ensure that case continues
to work correctly. The normal code is xlated to,
20: (b7) r1 = 0
21: (61) r1 = *(u32 *)(r3 +28)
22: (15) if r1 == 0x0 goto pc+2
23: (79) r1 = *(u64 *)(r3 +0)
24: (61) r1 = *(u32 *)(r1 +2348)
Where the temp variable is not used.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159718351457.4728.3295119261717842496.stgit@john-Precision-5820-Tower
When using a cross-compilation environment, such as OpenEmbedded,
the CC an CXX variables are set to something more than just a
command: there are arguments (such as --sysroot) that need to be
passed on to the compiler so that the right set of headers and
libraries are used.
For the particular case that our systems detected, CC is set to
the following:
export CC="aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot"
Without quotes, detection is as follows:
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:230: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
With CC and CXX quoted, some of those features are now detected.
Fixes: e3232c2f39 ("tools build feature: Use CC and CXX from parent")
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'dso->kernel' condition is true also for kernel modules now,
and there are several places that were omited by the initial change:
- we need to identify modules separately in dso__process_kernel_symbol
- we need to set 'dso->kernel' for module from buildid table
- there's no need to use 'dso->kernel || kmodule' in one condition
Committer testing:
Before:
# perf test -v object
<SNIP>
Objdump command is: objdump -z -d --start-address=0xffffffff813e682f --stop-address=0xffffffff813e68af /usr/lib/debug/lib/modules/5.7.14-200.fc32.x86_64/vmlinux
Bytes read match those read by objdump
Reading object code for memory address: 0xffffffffc02dc257
File is: /lib/modules/5.7.14-200.fc32.x86_64/kernel/arch/x86/crypto/crc32c-intel.ko.xz
On file address is: 0xffffffffc02dc2e7
dso__data_read_offset failed
test child finished with -1
---- end ----
Object code reading: FAILED!
#
After:
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
# perf test object
26: Object code reading : Ok
#
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Rename enum dso_kernel_type to enum dso_space_type, which seems like
better fit.
Committer notes:
This is used with 'struct dso'->kernel, which once was a boolean, so
DSO_SPACE__USER is zero, !zero means some sort of kernel space, be it
the host kernel space or a guest kernel space.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
