Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Add a test that runs traffic across a port throttled with TBF. The test
checks that the observed throughput is within +-5% from the installed
shaper.
To allow checking both the software datapath and the offloaded one, make
the test suitable for inclusion from driver-specific wrapper. Introduce
such wrappers for mlxsw.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function tc_rule_stats_get() fetches a packet counter of a given TC
rule. Extend it to support byte counters as well by adding an optional
argument with selector.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function busywait() is handy as a safety-latched variant of a while
loop. Many selftests deal specifically with counter values, and busywaiting
on them is likely to be rather common (it is not quite common now, but
busywait() has not been around for very long). To facilitate expressing
simply what is tested, introduce two helpers:
- until_counter_is(), which can be used as a predicate passed to
busywait(), which holds when expression, which is itself passed as an
argument to until_counter_is(), reaches a desired value.
- busywait_for_counter(), which is useful for waiting until a given counter
changes "by" (as opposed to "to") a certain amount.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function humanize() is used for converting value in bits/s to a
human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing
hardware-specific in that, so move the function to lib.sh.
Similarly for the rate() function, which just does a bit of math to
calculate a rate, given two counter values and a time interval.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.
The "-c" command line option for mptcp_connect.sh is there for debugging:
The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.
The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.
Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.
The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io. Default is non-blocking
io using read/write/poll.
Will run automatically on "make kselftest".
Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.
A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:
https://patchwork.kernel.org/patch/11204935/
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'duration' variable is referenced in the CHECK() macro, and there are
some uses of the macro before 'duration' is set. The clang compiler
(validly) complains about this.
Sample error:
.../selftests/bpf/prog_tests/fexit_test.c:23:6: warning: variable 'duration' is uninitialized when used here [-Wuninitialized]
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../selftests/bpf/test_progs.h:134:25: note: expanded from macro 'CHECK'
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_CHECK(condition, tag, duration, format)
^~~~~~~~
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200123235144.93610-1-sdf@google.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a bpf_cubic example. Some highlights:
1. CONFIG_HZ .kconfig map is used.
2. In bictcp_update(), calculation is changed to use usec
resolution (i.e. USEC_PER_JIFFY) instead of using jiffies.
Thus, usecs_to_jiffies() is not used in the bpf_cubic.c.
3. In bitctcp_update() [under tcp_friendliness], the original
"while (ca->ack_cnt > delta)" loop is changed to the equivalent
"ca->ack_cnt / delta" operation.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233658.903774-1-kafai@fb.com
Add program extension tests that build on top of fexit_bpf2bpf tests.
Replace three global functions in previously loaded test_pkt_access.c program
with three new implementations:
int get_skb_len(struct __sk_buff *skb);
int get_constant(long val);
int get_skb_ifindex(int val, struct __sk_buff *skb, int var);
New function return the same results as original only if arguments match.
new_get_skb_ifindex() demonstrates that 'skb' argument doesn't have to be first
and only argument of BPF program. All normal skb based accesses are available.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-4-ast@kernel.org
During cross-compilation, it was discovered that LDFLAGS and
LDLIBS were not being used while building binaries, leading
to defaults which were not necessarily correct.
OpenEmbedded reported this kind of problem:
ERROR: QA Issue: No GNU_HASH in the ELF binary [...], didn't pass LDFLAGS?
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
To make sure no new files are introduced that doesn't include the bpf/
prefix in its #include, remove tools/lib/bpf from the include path
entirely.
Instead, we introduce a new header files directory under the scratch tools/
dir, and add a rule to run the 'install_headers' rule from libbpf to have a
full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and
then use $(OUTPUT)/tools/include as the include path for selftests.
For consistency we also make sure we put all the scratch build files from
other bpftool and libbpf into tools/build/, so everything stays within
selftests/.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157952561246.1683545.2762245552022369203.stgit@toke.dk
Fix all selftests to include libbpf header files with the bpf/ prefix, to
be consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To not break the build, keep the old include path until everything has been
changed to the new one; a subsequent patch will remove that.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560568.1683545.9649335788846513446.stgit@toke.dk
Add a VMLINUX_BTF variable with the locally-built path when calling the
runqslower Makefile from selftests. This makes sure a simple 'make'
invocation in the selftests dir works even when there is no BTF information
for the running kernel. Do a wildcard expansion and include the same paths
for BTF for the running kernel as in the runqslower Makefile, to make it
possible to build selftests without having a vmlinux in the local tree.
Also fix the make invocation to use $(OUTPUT)/tools as the destination
directory instead of $(CURDIR)/tools.
Fixes: 3a0d3092a4 ("selftests/bpf: Build runqslower from selftests")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560344.1683545.2723631988771664417.stgit@toke.dk
After commit 0d13bfce02 ("libbpf: Don't require root for
bpf_object__open()") we no longer load BTF during bpf_object__open(),
so let's remove the expectation from test_btf that the fd is not -1.
The test currently fails.
Before:
BTF libbpf test[1] (test_btf_haskv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
BTF libbpf test[2] (test_btf_newkv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
BTF libbpf test[3] (test_btf_nokv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
After:
BTF libbpf test[1] (test_btf_haskv.o): OK
BTF libbpf test[2] (test_btf_newkv.o): OK
BTF libbpf test[3] (test_btf_nokv.o): OK
Fixes: 0d13bfce02 ("libbpf: Don't require root for bpf_object__open()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200118010546.74279-1-sdf@google.com
Test that the trap is triggered under the right conditions and that
devlink counters increase when action is trap.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases to check that packets routed through disabled RIFs and
packets routed from disabled RIFs are dropped and devlink counters
increase when the action is trap.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test all of the various openat2(2) flags. A small stress-test of a
symlink-rename attack is included to show that the protections against
".."-based attacks are sufficient.
The main things these self-tests are enforcing are:
* The struct+usize ABI for openat2(2) and copy_struct_from_user() to
ensure that upgrades will be handled gracefully (in addition,
ensuring that misaligned structures are also handled correctly).
* The -EINVAL checks for openat2(2) are all correctly handled to avoid
userspace passing unknown or conflicting flag sets (most
importantly, ensuring that invalid flag combinations are checked).
* All of the RESOLVE_* semantics (including errno values) are
correctly handled with various combinations of paths and flags.
* RESOLVE_IN_ROOT correctly protects against the symlink rename(2)
attack that has been responsible for several CVEs (and likely will
be responsible for several more).
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Alexei observed that test_progs send_signal may fail if run
with command line "./test_progs" and the tests will pass
if just run "./test_progs -n 40".
I observed similar issue with nmi subtest failure
and added a delay 100 us in Commit ab8b7f0cb3
("tools/bpf: Add self tests for bpf_send_signal_thread()")
and the problem is gone for me. But the issue still exists
in Alexei's testing environment.
The current code uses sample_freq = 50 (50 events/second), which
may not be enough. But if the sample_freq value is larger than
sysctl kernel/perf_event_max_sample_rate, the perf_event_open
syscall will fail.
This patch changed nmi perf testing to use sample_period = 1,
which means trying to sampling every event. This seems fixing
the issue.
Fixes: ab8b7f0cb3 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200116174004.1522812-1-yhs@fb.com
It was observed[1] on arm64 that __builtin_strlen led to an infinite
loop in the get_size selftest. This is because __builtin_strlen (and
other builtins) may sometimes result in a call to the C library
function. The C library implementation of strlen uses an IFUNC
resolver to load the most efficient strlen implementation for the
underlying machine and hence has a PLT indirection even for static
binaries. Because this binary avoids the C library startup routines,
the PLT initialization never happens and hence the program gets stuck
in an infinite loop.
On x86_64 the __builtin_strlen just happens to expand inline and avoid
the call but that is not always guaranteed.
Further, while testing on x86_64 (Fedora 31), it was observed that the
test also failed with a segfault inside write() because the generated
code for the write function in glibc seems to access TLS before the
syscall (probably due to the cancellation point check) and fails
because TLS is not initialised.
To mitigate these problems, this patch reduces the interface with the
C library to just the syscall function. The syscall function still
sets errno on failure, which is undesirable but for now it only
affects cases where syscalls fail.
[1] https://bugs.linaro.org/show_bug.cgi?id=5479
Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 35c9e74cff ("selftests/livepatch: Make dynamic debug setup and
restore generic") introduced setup_config() to set up the environment
for each test. It superseded set_dynamic_debug(). README still mentions
set_dynamic_debug(), so update it to setup_config() which should be used
now in every test.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add ability to specify a list of test name substrings for selecting which
tests to run. So now -t is accepting a comma-separated list of strings,
similarly to how -n accepts a comma-separated list of test numbers.
Additionally, add ability to blacklist tests by name. Blacklist takes
precedence over whitelist. Blacklisting is important for cases where it's
known that some tests can't pass (e.g., due to perf hardware events that are
not available within VM). This is going to be used for libbpf testing in
Travis CI in its Github repo.
Example runs with just whitelist and whitelist + blacklist:
$ sudo ./test_progs -tattach,core/existence
#1 attach_probe:OK
#6 cgroup_attach_autodetach:OK
#7 cgroup_attach_multi:OK
#8 cgroup_attach_override:OK
#9 core_extern:OK
#10/44 existence:OK
#10/45 existence___minimal:OK
#10/46 existence__err_int_sz:OK
#10/47 existence__err_int_type:OK
#10/48 existence__err_int_kind:OK
#10/49 existence__err_arr_kind:OK
#10/50 existence__err_arr_value_type:OK
#10/51 existence__err_struct_type:OK
#10 core_reloc:OK
#19 flow_dissector_reattach:OK
#60 tp_attach_query:OK
Summary: 8/8 PASSED, 0 SKIPPED, 0 FAILED
$ sudo ./test_progs -tattach,core/existence -bcgroup,flow/arr
#1 attach_probe:OK
#9 core_extern:OK
#10/44 existence:OK
#10/45 existence___minimal:OK
#10/46 existence__err_int_sz:OK
#10/47 existence__err_int_type:OK
#10/48 existence__err_int_kind:OK
#10/51 existence__err_struct_type:OK
#10 core_reloc:OK
#60 tp_attach_query:OK
Summary: 4/6 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200116005549.3644118-1-andriin@fb.com
The test_progs send_signal() is amended to test
bpf_send_signal_thread() as well.
$ ./test_progs -n 40
#40/1 send_signal_tracepoint:OK
#40/2 send_signal_perf:OK
#40/3 send_signal_nmi:OK
#40/4 send_signal_tracepoint_thread:OK
#40/5 send_signal_perf_thread:OK
#40/6 send_signal_nmi_thread:OK
#40 send_signal:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Also took this opportunity to rewrite the send_signal test
using skeleton framework and array mmap to make code
simpler and more readable.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035003.602425-1-yhs@fb.com
Mausezahn does not recognize "own" as a keyword on source IP address. As a
result, the MC stream is not running at all, and therefore no UC
degradation can be observed even in principle.
Fix the invocation, and tighten the test: due to the minimum shaper
configured at the MC TCs, we always expect about 20% degradation. Fail the
test if it is lower.
Fixes: 573363a68f ("selftests: mlxsw: Add qos_lib.sh")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test reuses the common FIB offload tests in order to make sure that
mlxsw correctly implements FIB offload.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of the FIB offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a set of common helpers and tests for FIB offload that can be
used by multiple drivers to check their FIB offload implementations.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Output on success:
1..1
ok 1 exec
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output on failure:
1..1
not ok 1 36016 16
Bail out!
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-35-dima@arista.com
Output on success:
1..4
ok 1 host: clock: monotonic cycles: 148323947
ok 2 host: clock: boottime cycles: 148577503
ok 3 ns: clock: monotonic cycles: 137659217
ok 4 ns: clock: boottime cycles: 137959154
# Pass 4 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP need to run as root
Output without support of time namespaces:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-34-dima@arista.com
Check that timer_create() takes into account clock offsets.
Output on success:
1..3
ok 1 clockid=7
ok 2 clockid=1
ok 3 clockid=9
# Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..3
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..3
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-33-dima@arista.com
Check that /proc/uptime is correct inside a new time namespace.
Output on success:
1..1
ok 1 Passed for /proc/uptime
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-32-dima@arista.com
Check that clock_nanosleep() takes into account clock offsets.
Output on success:
1..4
ok 1 clockid: 1 abs:0
ok 2 clockid: 1 abs:1
ok 3 clockid: 9 abs:0
ok 4 clockid: 9 abs:1
Output with lack of permissions:
1..4
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..4
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-31-dima@arista.com
