Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().
During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.
The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
Following current best practice, the instance of struct drm_device is now
embedded in struct mga_device. The respective field has been renamed from
'dev' to 'base' to reflect the relationship. Conversion from DRM device is
done via upcast. Using dev_private is no longer possible.
The patch also open-codes drm_dev_alloc() and DRM device initialization
is now performed by a call to drm_device_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200605135803.19811-14-tzimmermann@suse.de
The VRAM helpers managed the framebuffer memory for mgag200. This came
with several problems, as some MGA device require the scanout address
to be located at VRAM offset 0. It's incompatible with the page-flip
semantics of DRM's atomic modesettting. With atomic modesetting, old and
new framebuffers have to be located in VRAM at the same time. So at least
one of them has to reside at a non-0 offset.
This patch replaces VRAM helpers with SHMEM helpers. GEM SHMEM buffers
reside in system memory, and are shadow-copied into VRAM during page
flips. The shadow copy always starts at VRAM offset 0.
v2:
* revert dev->pdev changes
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-16-tzimmermann@suse.de
All register names and fields are now named according to the
MGA programming manuals. The function doesn't need the CRTC, so
callers pass in the device structure directly. The logging now
uses device-specific macros.
The original implementation busy-waited for the VSYNC flag to go
up, to synchronize the page flip with the display's vblank. This
code has been moved to mga_crtc_mode_set_base(). It's still present
in the non-atomic code paths, but won't be used in atomic commits.
With atomic, we should use interrupts to synchronize with vblanks.
v3:
* clarify commit message wrt. vblank busy-waiting
v2:
* use to_mga_device()
* use MiB instead of MB
* replace empty while loop with do-while, fixes checkpatch warning
* replace uint{8,32}_t with u{8,32}
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-3-tzimmermann@suse.de
The HW cursor of Matrox G200 cards only supports a 16-color palette
format. Univeral planes require at least ARGB or a similar component-
based format, so remove the HW cursor.
Alternatively, the driver could dither a cursor image from ARGB to
16 colors. But this does not produce pleasent-looking results in
general, so it's useless for modern compositors.
Without HW support, compositors will use software rendering.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515083233.32036-2-tzimmermann@suse.de
TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.
So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
Adding the pitch alignment as an argument to
drm_gem_vram_fill_create_dumb() allows to align scanlines to certain
offsets. A value of 0 disables scanline pitches.
v3:
* only do power-of-2 test if pitch_align given; fails otherwise
* mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align
v2:
* split of patch from related hibmc changes
* test if scanline pitch is power of 2
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203083819.6643-4-tzimmermann@suse.de
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
