drm/i915 fixes for 4.14-rc5:
Three fixes for stable:
- Use crtc_state_is_legacy_gamma in intel_color_check (Maarten)
- Read timings from the correct transcoder (Ville).
- Fix HDMI on BSW (Jani).
Other fixes:
- eDP fixes (Manasi)
- Silence compiler warnings (Chris)
- Order two completing nop_submit_request (Chris)
* tag 'drm-intel-fixes-2017-10-11' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel
drm/i915: Read timings from the correct transcoder in intel_crtc_mode_get()
drm/i915: Order two completing nop_submit_request
drm/i915: Silence compiler warning for hsw_power_well_enable()
drm/i915: Use crtc_state_is_legacy_gamma in intel_color_check
drm/i915/edp: Increase the T12 delay quirk to 1300ms
drm/i915/edp: Get the Panel Power Off timestamp after panel is off
bunch of msm fixes
* 'msm-fixes-4.14-rc4' of git://people.freedesktop.org/~robclark/linux:
drm/msm: fix _NO_IMPLICIT fencing case
drm/msm: fix error path cleanup
drm/msm/mdp5: Remove extra pm_runtime_put call in mdp5_crtc_cursor_set()
drm/msm/dsi: Use correct pm_runtime_put variant during host_init
drm/msm: fix return value check in _msm_gem_kernel_new()
drm/msm: use proper memory barriers for updating tail/head
drm/msm/mdp5: add missing max size for 8x74 v1
drm/imx: i.MX5 regression fix and i.MX6QP PRE/PRG stability fixes
- Disable channel burst locking on IPUv3EX (i.MX51) and IPUv3M (i.MX53).
This fixes a regression introduced by commit 790cb4c7c9 ("drm/imx: lock
scanout transfers for consecutive bursts").
- Give PRG a head start. Waiting for both double buffers to fill up before
enabling the IPU improves startup reliability.
- Avoid PRE control register updates during unsafe window, workaround for
ERR009624.
* tag 'imx-drm-fixes-2017-10-12' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: pre: implement workaround for ERR009624
gpu: ipu-v3: prg: wait for double buffers to be filled on channel startup
gpu: ipu-v3: Allow channel burst locking on i.MX6 only
We need to call reservation_object_reserve_shared() in both cases, but
this wasn't happening in the _NO_IMPLICIT submit case.
Fixes: f0a42bb ("drm/msm: submit support for in-fences")
Reported-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
While converting mdp5_enable/disable() calls to pm_runtime_get/put() API,
an extra call to pm_runtime_put_autosuspend() crept in
mdp5_crtc_cursor_set(). This results in calling the suspend handler
twice, and therefore clk_disables twice, which isn't a nice thing to do.
Fixes: d68fe15b18 (drm/msm/mdp5: Use runtime PM get/put API instead ...)
Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The DSI runtime PM suspend/resume callbacks check whether
msm_host->cfg_hnd is non-NULL before trying to enable the bus clocks.
This is done to accommodate early calls to these functions that may
happen before the bus clocks are even initialized.
Calling pm_runtime_put_autosuspend() in dsi_host_init() can result in
racy behaviour since msm_host->cfg_hnd is set very soon after. If the
suspend callback happens too late, we end up trying to disable clocks
that were never enabled, resulting in a bunch of WARN_ON splats.
Use pm_runtime_put_sync() so that the suspend callback is called
immediately.
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
In case of error, the function msm_gem_get_vaddr() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 8223286d62 ("drm/msm: Add a helper function for in-kernel
buffer allocations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The PRE has a bug where a software write to the CTRL register can block
the setting of the ENABLE bit by the hardware in auto repeat mode. When
this happens the PRE will fail to handle new jobs. To work around this
software must not write to CTRL register when the PRE store engine is
inside the unsafe window, where a hardware update to the ENABLE bit
may happen.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: rebased before PRE tiled prefetch support]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Wait for both double buffer to be filled when first starting a channel.
This makes channel startup a lot more reliable, probably because it allows
the internal state machine to settle before the requests from the IPU are
coming in.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
[p.zabel@pengutronix.de: rebased before switch to runtime PM]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The IDMAC_LOCK_EN registers on i.MX51 have a different layout, and on
i.MX53 enabling the lock feature causes bursts to get lost. Restrict
enabling the burst lock feature to i.MX6.
Reported-by: Patrick Brünn <P.Bruenn@beckhoff.com>
Fixes: 790cb4c7c9 ("drm/imx: lock scanout transfers for consecutive bursts")
Tested-by: Patrick Brünn <P.Bruenn@beckhoff.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
One bugfix in sun4i for 4.14
* tag 'drm-misc-fixes-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc:
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
drm/i915 fixes for 4.14-rc4:
All 3 highest GLK bugs fixed by Imre:
- GLK drv reload - Fix DDI Phy init if it was already on.
- GLK suspend resume - Reprogram DMC firmware after s3/s4.
- GLK DC states - Fix idleness calculation.
* tag 'drm-intel-fixes-2017-10-04' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/glk: Fix DMC/DC state idleness calculation
drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume
drm/i915: Fix DDI PHY init if it was already on
The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.
This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a013 ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com
(cherry picked from commit e19c1eb885)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
drm/i915 fixes for 4.14-rc3
Couple fixes for stable:
- Fix ELD connector types and consequently audio on DP (Jani).
- Ignore HDMI on Port A and consequently fix an ops on i915 probe
when VBT advertises HDMI on Port A (Jani).
And a small fix:
- That removes a reduntant hw_check on modeset. (Colin)
* tag 'drm-intel-fixes-2017-09-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915/bios: ignore HDMI on port A
drm/i915: remove redundant variable hw_check
drm/i915: always update ELD connector type after get modes
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170929082306.16193-6-wens@csie.org
A few fixes for 4.14. Nothing too major.
* 'drm-fixes-4.14' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable hard reset in hibernate for APUs
drm/amdgpu: revert tile table update for oland
Just two small etnaviv fixes, one fixing a list corruption, the other
fixing a NULL ptr deref in an error path.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
etnaviv: fix gem object list corruption
etnaviv: fix submit error path
Now that the cec-pin framework has been merged, we can remove the safeguard
that were preventing the CEC part of the sun4i HDMI driver and actually
start to use it.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Avoid intermediate negative numbers when doing calculations with a mix
of signed and unsigned variables where implicit conversions can lead
to unexpected results.
When kernel queue buffer wraps around to 0, we need to check that rptr
won't be overwritten by the new packet.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
- fix suspend/resume issues.
- fix memory corruption detected by kasan.
- fix build error on x86.
* tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos/hdmi: Fix unsafe list iteration
drm: exynos: include linux/irq.h
drm/exynos: Fix suspend/resume support
drm/exynos: Fix locking in the suspend/resume paths
Function hdmi_mode_fixup() used bare list_for_each entry, which was
unsafe and caused memory corruption detected by kasan.
It now uses drm_for_each_connector_iter macro, which is now recommended
by the documentation and safe.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
I ran into a build error on x86:
drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_conf_irq':
drivers/gpu/drm/exynos/exynos5433_drm_decon.c:706:2: error: implicit declaration of function 'irq_set_status_flags'; did you mean 'dquot_state_flag'? [-Werror=implicit-function-declaration]
irq_set_status_flags(irq, IRQ_NOAUTOEN);
Adding the missing include fixes the error.
Fixes: b37d53a038 ("drm/exynos/decon5433: move TE handling to DECON")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit 7d902c05b4 ("drm: Nuke drm_atomic_helper_connector_dpms")
removed drm_atomic_helper_connector_dpms() helper saying that it was a dead
code. It was however indirectly used by Exynos DRM driver for implementing
suspend/resume support. To fix this regression (after that patch Exynos DRM
suspend/resume functions became no-ops and hardware fails to suspend),
this patch rewrites them with drm_atomic_helper_suspend/resume() helpers.
Fixes: 7d902c05b4 ("drm: Nuke drm_atomic_helper_connector_dpms")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
replaced unsafe drm_for_each_connector() with drm_for_each_connector_iter()
and removed surrounding drm_modeset_lock calls. However, that lock was
there not only to protect unsafe drm_for_each_connector(), but it was also
required to be held by the dpms code which was called from the loop body.
This patch restores those drm_modeset_lock calls to fix broken suspend
and resume of Exynos DRM subsystem in v4.13 kernel.
Fixes: 48a9291672 ("drm/exynos: use drm_for_each_connector_iter()")
CC: stable@vger.kernel.org # v4.13
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This reverts commit bbdf0b2ff3 ("drm/i915/bxt: Disable device ready
before shutdown command").
Disable device ready before shutdown command was added previously to
avoid a split screen issue seen on dual link DSI panels. As of now, dual
link is not supported and will need some rework in the upstream
code. For single link DSI panels, the change is not required. This will
cause failure in sending SHUTDOWN packet during disable. Hence reverting
the change. Will handle the change as part of dual link enabling in
upstream.
Fixes: bbdf0b2ff3 ("drm/i915/bxt: Disable device ready before shutdown command")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1504604671-17237-1-git-send-email-vidya.srinivas@intel.com
(cherry picked from commit 33c8d8870c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
