Add a README that explains what the different example configs in the
ktest example directory are about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.
Here it is.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the config that I use to test several archs. I downloaded several
cross compilers from:
http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.
This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.
If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.
The default is that USE_OUTPUT_MIN_CONFIG is undefined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default
is 'boot' which is what make_min_config has done previously: makes a
config file that is the minimum needed to boot the target.
But when MIN_CONFIG_TYPE is set to 'test', not only must the target
boot, but it must also successfully run the TEST. This allows the
creation of a config file that is the minimum to boot and also
perform ssh to the target, or anything else a developer wants.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
tools/perf/Makefile
This tree from Frederic unifies the perf and trace-cmd trace event format
parsing code into a single library.
Powertop and other tools will also be able to make use of it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
764e16a changed perf-record to create events disabled by default and
enable them once perf initializations are done. This setting was dropped
by 0f82ebc. Now perf events are once again generated during perf's
initialization phase (e.g., generating maps).
As an example, perf opens a lot of files at startup. Unpatched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.087 MB /tmp/perf.data (~3798 samples) ]
Using perf-script to look at the samples shows the perf command generating
563 of the 566 total events.
Patched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.028 MB /tmp/perf.data (~1206 samples) ]
Using perf-script to look at the samples does not show perf command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336968088-11531-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PRE_BUILD and POST_BUILD options of ktest are added to allow the
user to add temporary patch to the system and remove it on builds. This
is sometimes use to take a change from another git branch and add it to
a series without the fix so that this series can be tested, when an
unrelated bug exists in the series.
The problem comes when a tagged commit is being used. For example, if
v3.2 is being tested, and we add a patch to it, the kernelrelease for
that commit will be 3.2.0+, but without the patch the version will be
3.2.0. This can cause problems when the kernelrelease is determined for
creating the /lib/modules directory. The kernel booting has the '+' but
the module directory will not, and the modules will be missing for that
boot, and may not allow the kernel to succeed.
The fix is to put the creation of the kernelrelease in the POST_BUILD
logic, before it applies the POST_BUILD operation. The POST_BUILD is
where the patch may be removed, removing the '+' from the kernelrelease.
The calculation of the kernelrelease will also stay in its current
location but will be ignored if it was already calculated previously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge reason: We are going to queue up a dependent patch:
"perf tools: Move parse event automated tests to separated object"
That depends on:
commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing
Conflicts:
tools/perf/builtin-stat.c
Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain address is stored as u64. Current code uses following
format string to display callchain address:
"%p\n", (void *)(long)chain->ip
This way we lose upper 32 bits if we report 64 bit addresses in 32 bit
environment. Fixing this to always display whole 64 bits.
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's been broken forever (i.e. it's not scheduling in a power
aware fashion), as reported by Suresh and others sending
patches, and nobody cares enough to fix it properly ...
so remove it to make space free for something better.
There's various problems with the code as it stands today, first
and foremost the user interface which is bound to topology
levels and has multiple values per level. This results in a
state explosion which the administrator or distro needs to
master and almost nobody does.
Furthermore large configuration state spaces aren't good, it
means the thing doesn't just work right because it's either
under so many impossibe to meet constraints, or even if
there's an achievable state workloads have to be aware of
it precisely and can never meet it for dynamic workloads.
So pushing this kind of decision to user-space was a bad idea
even with a single knob - it's exponentially worse with knobs
on every node of the topology.
There is a proposal to replace the user interface with a single
3 state knob:
sched_balance_policy := { performance, power, auto }
where 'auto' would be the preferred default which looks at things
like Battery/AC mode and possible cpufreq state or whatever the hw
exposes to show us power use expectations - but there's been no
progress on it in the past many months.
Aside from that, the actual implementation of the various knobs
is known to be broken. There have been sporadic attempts at
fixing things but these always stop short of reaching a mergable
state.
Therefore this wholesale removal with the hopes of spurring
people who care to come forward once again and work on a
coherent replacement.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As real device-nodes managed by udev whose nodes lived in /dev/bus/usb
are mostly used today, let testusb tool use that directory as one default
path make tool be more convenient to use.
Signed-off-by: Du Changbin <changbinx.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes and improvements for perf/core:
- perf_target: abstraction for --uid, --pid, --tid, --cpu, --all-cpus handling,
eliminating code duplicated in the tools, having constraints that apply to
all of them, from Namhyung Kim
- Fixes for handling fallback to cpu-clock on PPC, from David Ahern
- Fix for processing events with unknown size, from Jiri Olsa
- Compilation fix on 32-bit, from Jiri Olsa
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf stat on PPC currently fails to run:
$ perf stat -- sleep 1
Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.
Fatal: Not all events could be opened.
The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:
$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf top' command falls back to cpu-clock if the H/W cycles event
is not supported, but the event name is not updated leading to a
misleading header:
PerfTop: 8 irqs/sec kernel:75.0% exact: 0.0% [1000Hz cycles], ...
Update the event name when the event type is changed so that the
header displays correctly:
PerfTop: 794 irqs/sec kernel:100.0% exact: 0.0% [1000Hz cpu-clock], ...
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495789-58420-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat on PPC currently fails to run:
$ perf stat -- sleep 1
Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.
Fatal: Not all events could be opened.
The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:
$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.
...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-record on PPC is not falling back to cpu-clock:
$ perf record -ag -fo /tmp/perf.data -- sleep 1
Error: sys_perf_event_open() syscall returned with 6 (No such device or address). /bin/dmesg may provide additional information.
Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?
The problem is that until 2.6.37 (behavior changed with commit b0a873e)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:
$ perf record -ag -fo /tmp/perf.data -v -- sleep 1
Old kernel, cannot exclude guest or host samples.
The cycles event is not supported, trying to fall back to cpu-clock-ticks
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.151 MB /tmp/perf.data (~6592 samples) ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490937-57106-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf annotate browser improvements:
- Get back the line separating the overheads from the disassembly, requested by
Peter Zijlstra, Linus agreed now that it is a solid line and more column real
state was harvested. Also it has the jump->arrow lines separated from it by
the address/jump target column.
- Don't change asm line color when toggling source code view. Requested by
Peter Zijlstra.
Current snapshot:
avtab_search_node
│ push %rbp
│ mov %rsp,%rbp
│ → callq mcount
│ movzwl 0x6(%rsi),%edx
│ and $0x7fff,%dx
│ test %rdi,%rdi
│ ↓ jne 20
0.42 │17:┌─→xor %eax,%eax
│19:│ leaveq
0.42 │ │← retq
│ │ nopl 0x0(%rax,%rax,1)
│20:│ mov (%rdi),%rax
0.08 │ │ test %rax,%rax
│ └──je 17
│ movzwl (%rsi),%ecx
│ movzwl 0x2(%rsi),%r9d
│ movzwl 0x4(%rsi),%r8d
│ movzwl %cx,%esi
│ movzwl %r9w,%r10d
│ shl $0x9,%esi
│ lea (%rsi,%r10,4),%esi
│ lea (%r8,%rsi,1),%esi
│ and 0x10(%rdi),%si
│ movzwl %si,%esi
│ mov (%rax,%rsi,8),%rax
1.01 │ test %rax,%rax
│ ↑ je 19
│ nopw 0x0(%rax,%rax,1)
3.19 │60: cmp %cx,(%rax)
│ ↓ jne 7e
0.08 │ cmp %r9w,0x2(%rax)
│ ↓ jne 7e
│ cmp %r8w,0x4(%rax)
│ ↓ jne 79
│ test %dx,0x6(%rax)
│ ↑ jne 19
│79: cmp %r8w,0x4(%rax)
83.45 │7e: ↑ ja 17
3.36 │ mov 0x10(%rax),%rax
7.98 │ test %rax,%rax
│ ↑ jne 60
│ leaveq
│ ← retq
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
drivers/net/ethernet/intel/e1000e/param.c
drivers/net/wireless/iwlwifi/iwl-agn-rx.c
drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
drivers/net/wireless/iwlwifi/iwl-trans.h
Resolved the iwlwifi conflict with mainline using 3-way diff posted
by John Linville and Stephen Rothwell. In 'net' we added a bug
fix to make iwlwifi report a more accurate skb->truesize but this
conflicted with RX path changes that happened meanwhile in net-next.
In e1000e a conflict arose in the validation code for settings of
adapter->itr. 'net-next' had more sophisticated logic so that
logic was used.
Signed-off-by: David S. Miller <davem@davemloft.net>
The out functions should only handle actual available data instead of the complete buffer.
Otherwise for example the ep0_consume function will report ghost events since it tries to decode
the complete buffer - which may contain partly invalid data.
Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
