f7f286a910 ("x86/amd: Re-enable CPU topology extensions in case BIOS
has disabled it") wrongfully added code which used the AMD-specific
{rd,wr}msr variants for no real reason.
This caused boot panics on xen which wasn't initializing the
{rd,wr}msr_safe_regs pv_ops members properly.
This, in turn, caused a heated discussion leading to us reviewing all
uses of the AMD-specific variants and removing them where unneeded
(almost everywhere except an obscure K8 BIOS fix, see 6b0f43ddfa).
Finally, this patch switches to the standard {rd,wr}msr*_safe* variants
which should've been used in the first place anyway and avoided unneeded
excitation with xen.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/1338562358-28182-4-git-send-email-bp@amd64.org
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Link: <http://lkml.kernel.org/r/1338383402-3838-1-git-send-email-andre.przywara@amd.com>
[Boris: correct and expand commit message]
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There were paravirt_ops hooks for the full register set variant of
{rd,wr}msr_safe which are actually not used by anyone anymore. Remove
them to make the code cleaner and avoid silent breakages when the pvops
members were uninitialized. This has been boot-tested natively and under
Xen with PVOPS enabled and disabled on one machine.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Link: http://lkml.kernel.org/r/1338562358-28182-2-git-send-email-bp@amd64.org
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Avi Kivity reported that page faults in NMIs could cause havic if
the NMI preempted another page fault handler:
The recent changes to NMI allow exceptions to take place in NMI
handlers, but I think that a #PF (say, due to access to vmalloc space)
is still problematic. Consider the sequence
#PF (cr2 set by processor)
NMI
...
#PF (cr2 clobbered)
do_page_fault()
IRET
...
IRET
do_page_fault()
address = read_cr2()
The last line reads the overwritten cr2 value.
Originally I wrote a patch to solve this by saving the cr2 on the stack.
Brian Gerst suggested to save it in the r12 register as both r12 and rbx
are saved by the do_nmi handler as required by the C standard. But rbx
is already used for saving if swapgs needs to be run on exit of the NMI
handler.
Link: http://lkml.kernel.org/r/4FBB8C40.6080304@redhat.com
Link: http://lkml.kernel.org/r/1337763411.13348.140.camel@gandalf.stny.rr.com
Reported-by: Avi Kivity <avi@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Until now, writing to error count caused the code to reset the
thresholding bank to the current thresholding limit and start counting
errors from the beginning.
This is misleading and unclear, and can be accomplished by writing the
old thresholding limit into ->threshold_limit.
Make error_count read-only with the functionality to show the current
error count.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
We have rdmsr_on_cpu() now so remove locally defined solution in favor
of the generic one.
No functionality change.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
If one sets the threshold limit, say to 25:
$ echo 25 > machinecheck0/threshold_bank4/misc0/threshold_limit
and then reads it back again, it gives
$ cat machinecheck0/threshold_bank4/misc0/threshold_limit
19
which is actually 0x19 but we don't know that.
Make all output decimal.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Well, instead of having a real bank 4 on the BSP of each node and
symlinks on the remaining cores, we push it up into the amd_northbridge
descriptor which now contains a pointer to the northbridge bank 4
because the bank is one per northbridge and, as such, belongs in the NB
descriptor anyway.
Each time we hotplug CPUs, we use the northbridge pointer to copy the
shared bank into the per-CPU array of threshold_banks pointers, or
destroy it when the last CPU on the node goes offline, or create it when
the first comes online.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The code used to create a symlink on all non-BSP cores of a node when
the MCi_MISCj bank is present once per node. (This is generally the
case with bank 4 on AMD). However, these sysfs links cause a bunch
of problems with cpu off-/onlining testing and are, as such, a bit
overengineered. IOW, there's nothing wrong with having normal sysfs
files for the shared banks since the corresponding MSRs are replicated
across each core anyway.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Add the F3 PCI id of F15h, model 0x10 to pci_ids.h and to the amd_nb
code which generates the list of northbridges on an AMD box. Shorten
define name while at it so that it fits into pci_ids.h.
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The rdpmc instruction is faster than the equivelant rdmsr call,
so use it when possible in the kernel.
The perfctr kernel patches did this, after extensive testing showed
rdpmc to always be faster (One can look in etc/costs in the perfctr-2.6
package to see a historical list of the overhead).
I have done some tests on a 3.2 kernel, the kernel module I used
was included in the first posting of this patch:
rdmsr rdpmc
Core2 T9900: 203.9 cycles 30.9 cycles
AMD fam0fh: 56.2 cycles 9.8 cycles
Atom 6/28/2: 129.7 cycles 50.6 cycles
The speedup of using rdpmc is large.
[ It's probably possible (and desirable) to do this without
requiring a new field in the hw_perf_event structure, but
the fixed events make this tricky. ]
Signed-off-by: Vince Weaver <vweaver1@eecs.utk.edu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1203011724030.26934@cl320.eecs.utk.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Zheng Yan reported that event group validation can wreck event state
when Intel extra_reg allocation changes event state.
Validation shouldn't change any persistent state. Cloning events in
validate_{event,group}() isn't really pretty either, so add a few
special cases to avoid modifying the event state.
The code is restructured to minimize the special case impact.
Reported-by: Zheng Yan <zheng.z.yan@linux.intel.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338903031.28282.175.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 316ad24830 ("sched/x86: Rewrite set_cpu_sibling_map()")
broke the booted_cores accounting.
The problem is that the booted_cores accounting needs all the
sibling links set up. So restore the second loop and add a comment as
to why its needed.
On qemu booted with -smp sockets=1,cores=2,threads=2;
Before:
$ grep cores /proc/cpuinfo
cpu cores : 2
cpu cores : 1
cpu cores : 4
cpu cores : 3
With the patch:
$ grep cores /proc/cpuinfo
cpu cores : 2
cpu cores : 2
cpu cores : 2
cpu cores : 2
Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120531073738.GH7511@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In current Linux, percpu variable `vector_irq' is not cleared on
offlined cpus while disabling devices' irqs. If the cpu that has
the disabled irqs in vector_irq is hotplugged,
__setup_vector_irq() hits invalid irq vector and may crash.
This bug can be reproduced as following;
# echo 0 > /sys/devices/system/cpu/cpu7/online
# modprobe -r some_driver_using_interrupts # vector_irq@cpu7 uncleared
# echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash
This patch fixes this bug by clearing vector_irq in
__clear_irq_vector() even if the cpu is offlined.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: ltc-kernel@ml.yrl.intra.hitachi.co.jp
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/4FC340BE.7080101@hitachi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When rebooting our 24 CPU Westmere servers with 3.4-rc6, we
always see this warning msg:
Restarting system.
machine restart
------------[ cut here ]------------
WARNING: at arch/x86/kernel/smp.c:125
native_smp_send_reschedule+0x74/0xa7() Hardware name: X8DTN
Modules linked in: igb [last unloaded: scsi_wait_scan]
Pid: 1, comm: systemd-shutdow Not tainted 3.4.0-rc6+ #22
Call Trace:
<IRQ> [<ffffffff8102a41f>] warn_slowpath_common+0x7e/0x96
[<ffffffff8102a44c>] warn_slowpath_null+0x15/0x17
[<ffffffff81018cf7>] native_smp_send_reschedule+0x74/0xa7
[<ffffffff810561c1>] trigger_load_balance+0x279/0x2a6
[<ffffffff81050112>] scheduler_tick+0xe0/0xe9
[<ffffffff81036768>] update_process_times+0x60/0x70
[<ffffffff81062f2f>] tick_sched_timer+0x68/0x92
[<ffffffff81046e33>] __run_hrtimer+0xb3/0x13c
[<ffffffff81062ec7>] ? tick_nohz_handler+0xd0/0xd0
[<ffffffff810474f2>] hrtimer_interrupt+0xdb/0x198
[<ffffffff81019a35>] smp_apic_timer_interrupt+0x81/0x94
[<ffffffff81655187>] apic_timer_interrupt+0x67/0x70
<EOI> [<ffffffff8101a3c4>] ? default_send_IPI_mask_allbutself_phys+0xb4/0xc4
[<ffffffff8101c680>] physflat_send_IPI_allbutself+0x12/0x14
[<ffffffff81018db4>] native_nmi_stop_other_cpus+0x8a/0xd6
[<ffffffff810188ba>] native_machine_shutdown+0x50/0x67
[<ffffffff81018926>] machine_shutdown+0xa/0xc
[<ffffffff8101897e>] native_machine_restart+0x20/0x32
[<ffffffff810189b0>] machine_restart+0xa/0xc
[<ffffffff8103b196>] kernel_restart+0x47/0x4c
[<ffffffff8103b2e6>] sys_reboot+0x13e/0x17c
[<ffffffff8164e436>] ? _raw_spin_unlock_bh+0x10/0x12
[<ffffffff810fcac9>] ? bdi_queue_work+0xcf/0xd8
[<ffffffff810fe82f>] ? __bdi_start_writeback+0xae/0xb7
[<ffffffff810e0d64>] ? iterate_supers+0xa3/0xb7
[<ffffffff816547a2>] system_call_fastpath+0x16/0x1b
---[ end trace 320af5cb1cb60c5b ]---
The root cause seems to be the
default_send_IPI_mask_allbutself_phys() takes quite some time (I
measured it could be several ms) to complete sending NMIs to all
the other 23 CPUs, and for HZ=250/1000 system, the time is long
enough for a timer interrupt to happen, which will in turn
trigger to kick load balance to a stopped CPU and cause this
warning in native_smp_send_reschedule().
So disabling the local irq before stop_other_cpu() can fix this
problem (tested 25 times reboot ok), and it is fine as there
should be nobody caring the timer interrupt in such reboot
stage.
The latest 3.4 kernel slightly changes this behavior by sending
REBOOT_VECTOR first and only send NMI_VECTOR if the REBOOT_VCTOR
fails, and this patch is still needed to prevent the problem.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120530231541.4c13433a@feng-i7
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the HW implements round-robin interrupt delivery, this
enables multiple cpu's (which are part of the user specified
interrupt smp_affinity mask and belong to the same x2apic
cluster) to service the interrupt.
Also if the platform supports Power Aware Interrupt Routing,
then this enables the interrupt to be routed to an idle cpu or a
busy cpu depending on the perf/power bias tunable.
We are now grouping all the cpu's in a cluster to one vector
domain. So that will limit the total number of interrupt sources
handled by Linux. Previously we support "cpu-count *
available-vectors-per-cpu" interrupt sources but this will now
reduce to "cpu-count/16 * available-vectors-per-cpu".
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: gorcunov@openvz.org
Cc: agordeev@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337644682-19854-2-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Until now, irq_cfg domain is mostly static. Either all CPU's
(used by flat mode) or one CPU (first CPU in the irq afffinity
mask) to which irq is being migrated (this is used by the rest
of apic modes).
Upcoming x2apic cluster mode optimization patch allows the irq
to be sent to any CPU in the x2apic cluster (if supported by the
HW). So irq_cfg domain changes on the fly (depending on which
CPU in the x2apic cluster is online).
Instead of checking for any intersection between the new irq
affinity mask and the current irq_cfg domain, check if the new
irq affinity mask is a subset of the current irq_cfg domain.
Otherwise proceed with updating the irq_cfg domain aswell as
assigning vector's on all the CPUs specified in the new mask.
This also cleans up a workaround in updating irq_cfg domain for
legacy irq's that are handled by the IO-APIC.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: gorcunov@openvz.org
Cc: agordeev@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337644682-19854-1-git-send-email-suresh.b.siddha@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a more current logging style:
- Bare printks should have a KERN_<LEVEL> for consistency's sake
- Add pr_fmt where appropriate
- Neaten some macro definitions
- Convert some Ok output to OK
- Use "%s: ", __func__ in pr_fmt for summit
- Convert some printks to pr_<level>
Message output is not identical in all cases.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull MCE regression fix from Tony Luck:
"Typo/thinko in a cleanup caused a semantic change. Fix it."
* tag 'please-pull-mce' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
x86/mce: Fix the MCE poll timer logic
Pull scheduler fixes from Ingo Molnar.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Remove NULL assignment of dattr_cur
sched: Remove the last NULL entry from sched_feat_names
sched: Make sched_feat_names const
sched/rt: Fix SCHED_RR across cgroups
sched: Move nr_cpus_allowed out of 'struct sched_rt_entity'
sched: Make sure to not re-read variables after validation
sched: Fix SD_OVERLAP
sched: Don't try allocating memory from offline nodes
sched/nohz: Fix rq->cpu_load calculations some more
sched/x86: Use cpu_llc_shared_mask(cpu) for coregroup_mask
Pull straggler x86 fixes from Peter Anvin:
"Three groups of patches:
- EFI boot stub documentation and the ability to print error messages;
- Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
should never have been ported, and the port is broken and
potentially dangerous.)
- ftrace stack corruption fixes. I'm not super-happy about the
technical implementation, but it is probably the least invasive in
the short term. In the future I would like a single method for
nesting the debug stack, however."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
x86, efi: Add EFI boot stub documentation
x86, efi; Add EFI boot stub console support
x86, efi: Only close open files in error path
ftrace/x86: Do not change stacks in DEBUG when calling lockdep
x86: Allow nesting of the debug stack IDT setting
x86: Reset the debug_stack update counter
ftrace: Use breakpoint method to update ftrace caller
ftrace: Synchronize variable setting with breakpoints
When I added x32 ptrace to 3.4 kernel, I also include PTRACE_ARCH_PRCTL
support for x32 GDB For ARCH_GET_FS/GS, it takes a pointer to int64. But
at user level, ARCH_GET_FS/GS takes a pointer to int32. So I have to add
x32 ptrace to glibc to handle it with a temporary int64 passed to kernel and
copy it back to GDB as int32. Roland suggested that PTRACE_ARCH_PRCTL
is obsolete and x32 GDB should use fs_base and gs_base fields of
user_regs_struct instead.
Accordingly, remove PTRACE_ARCH_PRCTL completely from the x32 code to
avoid possible memory overrun when pointer to int32 is passed to
kernel.
Link: http://lkml.kernel.org/r/CAMe9rOpDzHfS7NH7m1vmD9QRw8SSj4Sc%2BaNOgcWm_WJME2eRsQ@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org> v3.4
If we end up calling do_notify_resume() with !user_mode(refs), it
does nothing (do_signal() explicitly bails out and we can't get there
with TIF_NOTIFY_RESUME in such situations). Then we jump to
resume_userspace_sig, which rechecks the same thing and bails out
to resume_kernel, thus breaking the loop.
It's easier and cheaper to check *before* calling do_notify_resume()
and bail out to resume_kernel immediately. And kill the check in
do_signal()...
Note that on amd64 we can't get there with !user_mode() at all - asm
glue takes care of that.
Acked-and-reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Does block_sigmask() + tracehook_signal_handler(); called when
sigframe has been successfully built. All architectures converted
to it; block_sigmask() itself is gone now (merged into this one).
I'm still not too happy with the signature, but that's a separate
story (IMO we need a structure that would contain signal number +
siginfo + k_sigaction, so that get_signal_to_deliver() would fill one,
signal_delivered(), handle_signal() and probably setup...frame() -
take one).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(),
added set_current_blocked() that will exclude unblockable signals, switched
open-coded instances to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
replace boilerplate "should we use ->saved_sigmask or ->blocked?"
with calls of obvious inlined helper...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
first fruits of ..._restore_sigmask() helpers: now we can take
boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK
and restore the blocked mask from ->saved_mask" into a common
helper. Open-coded instances switched...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
