84 Commits

Author	SHA1	Message	Date
Raghavendra Rao Ananta	5bd75403be	Merge remote-tracking branch 'remotes/origin/tmp-f686d9f' into msm-lahaina ... * remotes/origin/tmp-f686d9f: ANDROID: update abi_gki_aarch64.xml for 5.2-rc6 Linux 5.2-rc6 Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock" Bluetooth: Fix regression with minimum encryption key size alignment tcp: refine memory limit test in tcp_fragment() x86/vdso: Prevent segfaults due to hoisted vclock reads SUNRPC: Fix a credential refcount leak Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" net :sunrpc :clnt :Fix xps refcount imbalance on the error path NFS4: Only set creation opendata if O_CREAT ANDROID: gki_defconfig: workaround to enable configs ANDROID: gki_defconfig: more configs for partners ARM: 8867/1: vdso: pass --be8 to linker if necessary KVM: nVMX: reorganize initial steps of vmx_set_nested_state KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries habanalabs: use u64_to_user_ptr() for reading user pointers nfsd: replace Jeff by Chuck as nfsd co-maintainer inet: clear num_timeout reqsk_alloc() PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport doc: fix documentation about UIO_MEM_LOGICAL using MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk docs: fb: Add TER16x32 to the available font names MAINTAINERS: fpga: hand off maintainership to Moritz treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 484 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 481 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 480 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 479 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 477 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 475 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 474 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 473 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 472 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 471 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 469 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 468 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 467 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 466 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 465 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 464 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 463 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 462 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 461 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 460 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 457 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 456 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 455 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 454 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 452 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 451 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 250 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 248 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 247 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 246 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 245 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 244 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 243 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 239 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 238 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 237 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 232 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 231 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 226 KVM: arm/arm64: Fix emulated ptimer irq injection net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() tests: kvm: Check for a kernel warning kvm: tests: Sort tests in the Makefile alphabetically KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT KVM: x86: Modify struct kvm_nested_state to have explicit fields for data fanotify: update connector fsid cache on add mark quota: fix a problem about transfer quota drm/i915: Don't clobber M/N values during fastset check powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac ovl: make i_ino consistent with st_ino in more cases scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL apparmor: reset pos on failure to unpack for various functions apparmor: enforce nullbyte at end of tag string apparmor: fix PROFILE_MEDIATES for untrusted input RDMA/efa: Handle mmap insertions overflow tun: wake up waitqueues after IFF_UP is set drm: return -EFAULT if copy_to_user() fails net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer bnx2x: Check if transceiver implements DDM before access xhci: detect USB 3.2 capable host controllers correctly usb: xhci: Don't try to recover an endpoint if port is in error state. KVM: fix typo in documentation drm/panfrost: Make sure a BO is only unmapped when appropriate md: fix for divide error in status_resync soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe arm64/mm: don't initialize pgd_cache twice MAINTAINERS: Update my email address arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h> ovl: fix typo in MODULE_PARM_DESC ovl: fix bogus -Wmaybe-unitialized warning ovl: don't fail with disconnected lower NFS mmc: core: Prevent processing SDIO IRQs when the card is suspended mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning brcmfmac: sdio: Don't tune while the card is off mmc: core: Add sdio_retune_hold_now() and sdio_retune_release() brcmfmac: sdio: Disable auto-tuning around commands expected to fail mmc: core: API to temporarily disable retuning for SDIO CRC errors Revert "brcmfmac: disable command decode in sdio_aos" ARM: ixp4xx: include irqs.h where needed ARM: ixp4xx: mark ixp4xx_irq_setup as __init ARM: ixp4xx: don't select SERIAL_OF_PLATFORM firmware: trusted_foundations: add ARMv7 dependency usb: dwc2: Use generic PHY width in params setup RDMA/efa: Fix success return value in case of error IB/hfi1: Handle port down properly in pio IB/hfi1: Handle wakeup of orphaned QPs for pio IB/hfi1: Wakeup QPs orphaned on wait list after flush IB/hfi1: Use aborts to trigger RC throttling IB/hfi1: Create inline to get extended headers IB/hfi1: Silence txreq allocation warnings IB/hfi1: Avoid hardlockup with flushlist_lock KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr() fs/namespace: fix unprivileged mount propagation vfs: fsmount: add missing mntget() cifs: fix GlobalMid_Lock bug in cifs_reconnect SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write staging: erofs: add requirements field in superblock arm64: ssbd: explicitly depend on <linux/prctl.h> block: fix page leak when merging to same page block: return from __bio_try_merge_page if merging occured in the same page Btrfs: fix failure to persist compression property xattr deletion on fsync riscv: remove unused barrier defines usb: chipidea: udc: workaround for endpoint conflict issue MAINTAINERS: Change QCOM repo location mmc: mediatek: fix SDIO IRQ detection issue mmc: mediatek: fix SDIO IRQ interrupt handle flow mmc: core: complete HS400 before checking status riscv: mm: synchronize MMU after pte change MAINTAINERS: Update my email address to use @kernel.org ANDROID: update abi_gki_aarch64.xml for 5.2-rc5 riscv: dts: add initial board data for the SiFive HiFive Unleashed riscv: dts: add initial support for the SiFive FU540-C000 SoC dt-bindings: riscv: convert cpu binding to json-schema dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 arch: riscv: add support for building DTB files from DT source data drm/i915/gvt: ignore unexpected pvinfo write lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly Linux 5.2-rc5 tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change powerpc/32: fix build failure on book3e with KVM powerpc/booke: fix fast syscall entry on SMP powerpc/32s: fix initial setup of segment registers on secondary CPU x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl tcp: add tcp_rx_skb_cache sysctl sysctl: define proc_do_static_key() hv_netvsc: Set probe mode to sync net: sched: flower: don't call synchronize_rcu() on mask creation net: dsa: fix warning same module names sctp: Free cookie before we memdup a new one net: dsa: microchip: Don't try to read stats for unused ports qmi_wwan: extend permitted QMAP mux_id value range qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode qmi_wwan: add network device usage statistics for qmimux devices qmi_wwan: add support for QMAP padding in the RX path bpf, x64: fix stack layout of JITed bpf code Smack: Restore the smackfsdef mount option and add missing prefixes bpf, devmap: Add missing RCU read lock on flush bpf, devmap: Add missing bulk queue free bpf, devmap: Fix premature entry free on destroying map ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print() gfs2: Fix rounding error in gfs2_iomap_page_prepare net: phylink: further mac_config documentation improvements nfc: Ensure presence of required attributes in the deactivate_target handler btrfs: start readahead also in seed devices x86/kasan: Fix boot with 5-level paging and KASAN cfg80211: report measurement start TSF correctly cfg80211: fix memory leak of wiphy device name cfg80211: util: fix bit count off by one mac80211: do not start any work during reconfigure flow cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data() mac80211: only warn once on chanctx_conf being NULL mac80211: drop robust management frames from unknown TA gpu: ipu-v3: image-convert: Fix image downsize coefficients gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats gpu: ipu-v3: image-convert: Fix input bytesperline width/height align thunderbolt: Implement CIO reset correctly for Titan Ridge ARM: davinci: da8xx: specify dma_coherent_mask for lcdc ARM: davinci: da850-evm: call regulator_has_full_constraints() timekeeping: Repair ktime_get_coarse*() granularity Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops" ANDROID: update abi_gki_aarch64.xml mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() mm/vmscan.c: fix trying to reclaim unevictable LRU page coredump: fix race condition between collapse_huge_page() and core dumping mm/mlock.c: change count_mm_mlocked_page_nr return type mm: mmu_gather: remove __tlb_reset_range() for force flush fs/ocfs2: fix race in ocfs2_dentry_attach_lock() mm/vmscan.c: fix recent_rotated history mm/mlock.c: mlockall error for flag MCL_ONFAULT scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node mm: memcontrol: don't batch updates of local VM stats and events PCI: PM: Skip devices in D0 for suspend-to-idle ANDROID: Removed extraneous configs from gki powerpc/bpf: use unsigned division instruction for 64-bit operations bpf: fix div64 overflow tests to properly detect errors bpf: sync BPF_FIB_LOOKUP flag changes with BPF uapi bpf: simplify definition of BPF_FIB_LOOKUP related flags cifs: add spinlock for the openFileList to cifsInodeInfo cifs: fix panic in smb2_reconnect x86/fpu: Don't use current->mm to check for a kthread KVM: nVMX: use correct clean fields when copying from eVMCS vfio-ccw: Destroy kmem cache region on module exit block/ps3vram: Use %llu to format sector_t after LBDAF removal libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached bcache: fix stack corruption by PRECEDING_KEY() arm64/sve: Fix missing SVE/FPSIMD endianness conversions blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests blkio-controller.txt: Remove references to CFQ block/switching-sched.txt: Update to blk-mq schedulers null_blk: remove duplicate check for report zone blk-mq: no need to check return value of debugfs_create functions io_uring: fix memory leak of UNIX domain socket inode block: force select mq-deadline for zoned block devices binder: fix possible UAF when freeing buffer drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported() ANDROID: x86 gki_defconfig: enable DMA_CMA ANDROID: Fixed x86 regression ANDROID: gki_defconfig: enable DMA_CMA Input: synaptics - enable SMBus on ThinkPad E480 and E580 net: mvpp2: prs: Use the correct helpers when removing all VID filters net: mvpp2: prs: Fix parser range for VID filtering mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2 selftests: tc_flower: Add TOS matching test mlxsw: spectrum_flower: Fix TOS matching selftests: mlxsw: Test nexthop offload indication mlxsw: spectrum_router: Refresh nexthop neighbour when it becomes dead mlxsw: spectrum: Use different seeds for ECMP and LAG hash net: tls, correctly account for copied bytes with multiple sk_msgs vrf: Increment Icmp6InMsgs on the original netdev cpuset: restore sanity to cpuset_cpus_allowed_fallback() net: ethtool: Allow matching on vlan DEI bit linux-next: DOC: RDS: Fix a typo in rds.txt x86/kgdb: Return 0 from kgdb_arch_set_breakpoint() mpls: fix af_mpls dependencies for real selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts() selinux: fix a missing-check bug in selinux_add_mnt_opt( ) arm64: tlbflush: Ensure start/end of address range are aligned to stride usb: typec: Make sure an alt mode exist before getting its partner KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST KVM: arm64: Implement vq_present() as a macro xdp: check device pointer before clearing bpf: net: Set sk_bpf_storage back to NULL for cloned sk Btrfs: fix race between block group removal and block group allocation clocksource/drivers/arm_arch_timer: Don't trace count reader functions i2c: pca-platform: Fix GPIO lookup code thunderbolt: Make sure device runtime resume completes before taking domain lock drm: add fallback override/firmware EDID modes workaround i2c: acorn: fix i2c warning arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS drm/edid: abstract override/firmware EDID retrieval platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration platform/x86: intel-vbtn: Report switch events when event wakes device platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled x86/resctrl: Don't stop walking closids when a locksetup group is found iommu/arm-smmu: Avoid constant zero in TLBI writes drm/i915/perf: fix whitelist on Gen10+ drm/i915/sdvo: Implement proper HDMI audio support for SDVO drm/i915: Fix per-pixel alpha with CCS drm/i915/dmc: protect against reading random memory drm/i915/dsi: Use a fuzzy check for burst mode clock check Input: imx_keypad - make sure keyboard can always wake up system selinux: log raw contexts as untrusted strings ptrace: restore smp_rmb() in __ptrace_may_access() IB/hfi1: Correct tid qp rcd to match verbs context IB/hfi1: Close PSM sdma_progress sleep window IB/hfi1: Validate fault injection opcode user input geneve: Don't assume linear buffers in error handler vxlan: Don't assume linear buffers in error handler net: openvswitch: do not free vport if register_netdevice() is failed. net: correct udp zerocopy refcnt also when zerocopy only on append drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls riscv: Fix udelay in RV32. drm/vmwgfx: fix a warning due to missing dma_parms riscv: export pm_power_off again drm/vmwgfx: Honor the sg list segment size limitation RISC-V: defconfig: enable clocks, serial console drm/vmwgfx: Use the backdoor port if the HB port is not available bpf: lpm_trie: check left child of last leftmost node for NULL Revert "fuse: require /dev/fuse reads to have enough buffer capacity" ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire) ALSA: oxfw: allow PCM capture for Stanton SCS.1m ALSA: firewire-motu: fix destruction of data for isochronous resources s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline s390/boot: disable address-of-packed-member warning ANDROID: update gki aarch64 ABI representation cgroup: Fix css_task_iter_advance_css_set() cset skip condition drm/panfrost: Require the simple_ondemand governor drm/panfrost: make devfreq optional again drm/gem_shmem: Use a writecombine mapping for ->vaddr mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H ASoC: Intel: sst: fix kmalloc call with wrong flags ASoC: core: Fix deadlock in snd_soc_instantiate_card() cgroup/bfq: revert bfq.weight symlink change ARM: dts: am335x phytec boards: Fix cd-gpios active level ARM: dts: dra72x: Disable usb4_tm target module nfp: ensure skb network header is set for packet redirect tcp: fix undo spurious SYNACK in passive Fast Open mpls: fix af_mpls dependencies ibmvnic: Fix unchecked return codes of memory allocations ibmvnic: Refresh device multicast list after reset ibmvnic: Do not close unopened driver during reset mpls: fix warning with multi-label encap net: phy: rename Asix Electronics PHY driver ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero net: ipv4: fib_semantics: fix uninitialized variable Input: iqs5xx - get axis info before calling input_mt_init_slots() Linux 5.2-rc4 drm: panel-orientation-quirks: Add quirk for GPD MicroPC drm: panel-orientation-quirks: Add quirk for GPD pocket2 counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set x86/fpu: Update kernel's FPU state before using for the fsave header MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk ANDROID: update ABI representation gpio: pca953x: hack to fix 24 bit gpio expanders net/mlx5e: Support tagged tunnel over bond net/mlx5e: Avoid detaching non-existing netdev under switchdev mode net/mlx5e: Fix source port matching in fdb peer flow rule net/mlx5e: Replace reciprocal_scale in TX select queue function net/mlx5e: Add ndo_set_feature for uplink representor net/mlx5: Avoid reloading already removed devices net/mlx5: Update pci error handler entries and command translation RAS/CEC: Convert the timer callback to a workqueue RAS/CEC: Fix binary search function x86/mm/KASLR: Compute the size of the vmemmap section properly can: purge socket error queue on sock destruct can: flexcan: Remove unneeded registration message can: af_can: Fix error path of can_init() can: m_can: implement errata "Needless activation of MRAF irq" can: mcp251x: add support for mcp25625 dt-bindings: can: mcp251x: add mcp25625 support can: xilinx_can: use correct bittiming_const for CAN FD core can: flexcan: fix timeout when set small bitrate can: usb: Kconfig: Remove duplicate menu entry lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind scsi: hpsa: correct ioaccel2 chaining btrfs: Always trim all unallocated space in btrfs_trim_free_extents netfilter: ipv6: nf_defrag: accept duplicate fragments again powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX drm/meson: fix G12A primary plane disabling drm/meson: fix primary plane disabling drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate() powerpc/64s: Fix THP PMD collapse serialisation powerpc: Fix kexec failure on book3s/32 drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue bpf: expand section tests for test_section_names bpf: more msg_name rewrite tests to test_sock_addr bpf, bpftool: enable recvmsg attach types bpf, libbpf: enable recvmsg attach types bpf: sync tooling uapi header bpf: fix unconnected udp hooks vfio/mdev: Synchronize device create/remove with parent removal vfio/mdev: Avoid creating sysfs remove file on stale device removal pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 soundwire: intel: set dai min and max channels correctly soundwire: stream: fix bad unlock balance x86/fpu: Use fault_in_pages_writeable() for pre-faulting nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation vfio/mdev: Improve the create/remove sequence SoC: rt274: Fix internal jack assignment in set_jack callback ALSA: hdac: fix memory release for SST and SOF drivers ASoC: SOF: Intel: hda: use the defined ppcap functions ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override Revert "gfs2: Replace gl_revokes with a GLF flag" arm64: Silence gcc warnings about arch ABI drift parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe() usb: gadget: dwc2: fix zlp handling usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i] usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init() usb: dwc2: Fix DMA cache alignment issues usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression) ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix drm/komeda: Potential error pointer dereference drm/komeda: remove set but not used variable 'kcrtc' x86/CPU: Add more Icelake model numbers hwmon: (pmbus/core) Treat parameters as paged if on multiple pages hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples hwmon: (core) add thermal sensors only if dev->of_node is present Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled selftests: vm: Fix test build failure when built by itself tools: bpftool: Fix JSON output when lookup fails mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works cgroup: css_task_iter_skip()'d iterators must be advanced before accessed drm/amd/amdgpu: add RLC firmware to support raven1 refresh drm/amd/powerplay: add set_power_profile_mode for raven1_refresh drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 426 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 424 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 423 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 421 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 419 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 418 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 417 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 416 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 414 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 412 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 411 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 410 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 409 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 408 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 407 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 406 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 405 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 404 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 403 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 402 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 401 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 400 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 397 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 396 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 395 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 394 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 393 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 392 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 391 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 390 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 389 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 388 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 387 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 380 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 377 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 376 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 375 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 373 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 371 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 370 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 367 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 365 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 364 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 363 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 362 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 354 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 353 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 352 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 351 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 350 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 349 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 348 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 347 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 346 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 344 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 343 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 342 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 341 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 340 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 339 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 338 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 334 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 328 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 326 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 325 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 324 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 323 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 320 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 316 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 315 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 314 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 313 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 312 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 311 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 310 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 308 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 307 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 305 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 301 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 300 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 299 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 297 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 296 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 294 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 292 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 290 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 289 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 283 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 281 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 280 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 278 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 277 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 276 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 275 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 274 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 273 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 272 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 271 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 270 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 269 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 268 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 265 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 264 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 263 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 262 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 260 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 258 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 257 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 256 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 254 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 253 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 252 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 251 lib/test_stackinit: Handle Clang auto-initialization pattern block: Drop unlikely before IS_ERR(_OR_NULL) xen/swiotlb: don't initialize swiotlb twice on arm64 s390/mm: fix address space detection in exception handling HID: logitech-dj: Fix 064d:c52f receiver support Revert "HID: core: Call request_module before doing device_add" Revert "HID: core: Do not call request_module() in async context" Revert "HID: Increase maximum report size allowed by hid_field_extract()" tests: fix pidfd-test compilation signal: improve comments samples: fix pidfd-metadata compilation arm64: arch_timer: mark functions as __always_inline arm64: smp: Moved cpu_logical_map[] to smp.h arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding() selftests/bpf: move test_lirc_mode2_user to TEST_GEN_PROGS_EXTENDED USB: Fix chipmunk-like voice when using Logitech C270 for recording audio. USB: usb-storage: Add new ID to ums-realtek udmabuf: actually unmap the scatterlist net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() scsi: ufs: Check that space was properly alloced in copy_query_response udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock Revert "net/tls: avoid NULL-deref on resync during device removal" block: aoe: no need to check return value of debugfs_create functions net: dsa: sja1105: Fix link speed not working at 100 Mbps and below net: phylink: avoid reducing support mask scripts/checkstack.pl: Fix arm64 wrong or unknown architecture kbuild: tar-pkg: enable communication with jobserver kconfig: tests: fix recursive inclusion unit test kbuild: teach kselftest-merge to find nested config files nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership ASoC: sun4i-i2s: Add offset to RX channel select ASoC: sun4i-i2s: Fix sun8i tx channel offset mask ASoC: max98090: remove 24-bit format support if RJ is 0 ASoC: da7219: Fix build error without CONFIG_I2C ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error drm/arm/hdlcd: Allow a bit of clock tolerance drm/arm/hdlcd: Actually validate CRTC modes drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times drm/komeda: fixing of DMA mapping sg segment warning netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments habanalabs: Read upper bits of trace buffer from RWPHI arm64: arch_k3: Fix kconfig dependency warning drm: don't block fb changes for async plane updates drm/vc4: fix fb references in async update drm/msm: fix fb references in async update drm/amd: fix fb references in async update drm/rockchip: fix fb references in async update xen-blkfront: switch kcalloc to kvcalloc for large array allocation drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() drm/mediatek: clear num_pipes when unbind driver drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driver drm/mediatek: unbind components in mtk_drm_unbind() drm/mediatek: fix unbind functions net: sfp: read eeprom in maximum 16 byte increments selftests: set sysctl bc_forwarding properly in router_broadcast.sh ANDROID: update gki aarch64 ABI representation net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set ANDROID: gki_defconfig: Enable CMA, SLAB_FREELIST (RANDOM and HARDENED) on x86 bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err rcu: locking and unlocking need to always be at least barriers ANDROID: gki_defconfig: enable SLAB_FREELIST_RANDOM, SLAB_FREELIST_HARDENED ANDROID: gki_defconfig: enable CMA and increase CMA_AREAS ASoC: SOF: fix DSP oops definitions in FW ABI ASoC: hda: fix unbalanced codec dev refcount for HDA_DEV_ASOC ASoC: SOF: ipc: replace fw ready bitfield with explicit bit ordering ASoC: SOF: bump to ABI 3.6 ASoC: SOF: soundwire: add initial soundwire support ASoC: SOF: uapi: mirror firmware changes ASoC: Intel: Baytrail: add quirk for Aegex 10 (RU2) tablet xfs: inode btree scrubber should calculate im_boffset correctly mmc: sdhci_am654: Fix SLOTTYPE write usb: typec: ucsi: ccg: fix memory leak in do_flash ANDROID: update gki aarch64 ABI representation habanalabs: Fix virtual address access via debugfs for 2MB pages drm/komeda: Constify the usage of komeda_component/pipeline/dev_funcs x86/power: Fix 'nosmt' vs hibernation triple fault during resume mm/vmalloc: Avoid rare case of flushing TLB with weird arguments mm/vmalloc: Fix calculation of direct map addr range PM: sleep: Add kerneldoc comments to some functions drm/i915/gvt: save RING_HEAD into vreg when vgpu switched out sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD mdesc: fix a missing-check bug in get_vdev_port_node_info() drm/i915/gvt: add F_CMD_ACCESS flag for wa regs sparc64: Fix regression in non-hypervisor TLB flush xcall packet: unconditionally free po->rollover Update my email address net: hns: Fix loopback test failed at copper ports Linux 5.2-rc3 net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0 mm, compaction: make sure we isolate a valid PFN include/linux/generic-radix-tree.h: fix kerneldoc comment kernel/signal.c: trace_signal_deliver when signal_group_exit drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used spdxcheck.py: fix directory structures kasan: initialize tag to 0xff in __kasan_kmalloc z3fold: fix sheduling while atomic scripts/gdb: fix invocation when CONFIG_COMMON_CLK is not set mm/gup: continue VM_FAULT_RETRY processing even for pre-faults ocfs2: fix error path kobject memory leak memcg: make it work on sparse non-0-node systems mm, memcg: consider subtrees in memory.events prctl_set_mm: downgrade mmap_sem to read lock prctl_set_mm: refactor checks from validate_prctl_map kernel/fork.c: make max_threads symbol static arch/arm/boot/compressed/decompress.c: fix build error due to lz4 changes arch/parisc/configs/c8000_defconfig: remove obsoleted CONFIG_DEBUG_SLAB_LEAK mm/vmalloc.c: fix typo in comment lib/sort.c: fix kernel-doc notation warnings mm: fix Documentation/vm/hmm.rst Sphinx warnings treewide: fix typos of SPDX-License-Identifier crypto: ux500 - fix license comment syntax error MAINTAINERS: add I2C DT bindings to ARM platforms MAINTAINERS: add DT bindings to i2c drivers mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() iwlwifi: mvm: change TLC config cmd sent by rs to be async iwlwifi: Fix double-free problems in iwl_req_fw_callback() iwlwifi: fix AX201 killer sku loading firmware issue iwlwifi: print fseq info upon fw assert iwlwifi: clear persistence bit according to device family iwlwifi: fix load in rfkill flow for unified firmware iwlwifi: mvm: remove d3_sram debugfs file bpf, riscv: clear high 32 bits for ALU32 add/sub/neg/lsh/rsh/arsh libbpf: Return btf_fd for load_sk_storage_btf HID: a4tech: fix horizontal scrolling HID: hyperv: Add a module description line net: dsa: sja1105: Don't store frame type in skb->cb block: print offending values when cloned rq limits are exceeded blk-mq: Document the blk_mq_hw_queue_to_node() arguments blk-mq: Fix spelling in a source code comment block: Fix bsg_setup_queue() kernel-doc header block: Fix rq_qos_wait() kernel-doc header block: Fix blk_mq_*_map_queues() kernel-doc headers block: Fix throtl_pending_timer_fn() kernel-doc header block: Convert blk_invalidate_devt() header into a non-kernel-doc header block/partitions/ldm: Convert a kernel-doc header into a non-kernel-doc header leds: avoid flush_work in atomic context cgroup: Include dying leaders with live threads in PROCS iterations cgroup: Implement css_task_iter_skip() cgroup: Call cgroup_release() before __exit_signal() netfilter: nf_tables: fix module autoload with inet family Revert "lockd: Show pid of lockd for remote locks" ALSA: hda/realtek - Update headset mode for ALC256 fs/adfs: fix filename fixup handling for "/" and "//" names fs/adfs: move append_filetype_suffix() into adfs_object_fixup() fs/adfs: remove truncated filename hashing fs/adfs: factor out filename fixup fs/adfs: factor out object fixups fs/adfs: factor out filename case lowering fs/adfs: factor out filename comparison ovl: doc: add non-standard corner cases pstore/ram: Run without kernel crash dump region MAINTAINERS: add Vasily Gorbik and Christian Borntraeger for s390 MAINTAINERS: Farewell Martin Schwidefsky pstore: Set tfm to NULL on free_buf_for_compression nds32: add new emulations for floating point instruction nds32: Avoid IEX status being incorrectly modified math-emu: Use statement expressions to fix Wshift-count-overflow warning net: correct zerocopy refcnt with udp MSG_MORE ethtool: Check for vlan etype or vlan tci when parsing flow_rule net: don't clear sock->sk early to avoid trouble in strparser net-gro: fix use-after-free read in napi_gro_frags() net: dsa: tag_8021q: Create a stable binary format net: dsa: tag_8021q: Change order of rx_vid setup net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value docs cgroups: add another example size for hugetlb NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter ipv4: tcp_input: fix stack out of bounds when parsing TCP options. mlxsw: spectrum: Prevent force of 56G mlxsw: spectrum_acl: Avoid warning after identical rules insertion SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT SUNRPC fix regression in umount of a secure mount r8169: fix MAC address being lost in PCI D3 treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 200 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 199 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 198 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 195 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 193 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 190 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 188 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 185 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 183 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 182 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 180 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 179 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 176 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 175 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 173 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 172 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 171 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 170 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 165 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 164 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 162 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 161 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 160 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 158 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 155 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 154 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 151 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 150 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 148 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 147 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 145 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 144 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 143 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 142 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 140 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 139 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 138 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 137 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 136 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 135 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 133 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 132 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 131 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 130 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 129 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 128 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 127 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 126 net: core: support XDP generic on stacked devices. netvsc: unshare skb in VF rx handler udp: Avoid post-GRO UDP checksum recalculation nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited fpga: zynqmp-fpga: Correctly handle error pointer selftests: vm: install test_vmalloc.sh for run_vmtests userfaultfd: selftest: fix compiler warning kselftest/cgroup: fix incorrect test_core skip kselftest/cgroup: fix unexpected testing failure on test_core kselftest/cgroup: fix unexpected testing failure on test_memcontrol xtensa: Fix section mismatch between memblock_reserve and mem_reserve signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO mwifiex: Abort at too short BSS descriptor element mwifiex: Fix possible buffer overflows at parsing bss descriptor drm/i915/gvt: Assign NULL to the pointer after memory free. drm/i915/gvt: Check if cur_pt_type is valid x86: intel_epb: Do not build when CONFIG_PM is unset crypto: hmac - fix memory leak in hmac_init_tfm() crypto: jitterentropy - change back to module_init() ARM: dts: Drop bogus CLKSEL for timer12 on dra7 KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry() KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9 KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device drm/i915/gvt: Fix cmd length of VEB_DI_IECP drm/i915/gvt: refine ggtt range validation drm/i915/gvt: Fix vGPU CSFE_CHICKEN1_REG mmio handler drm/i915/gvt: Fix GFX_MODE handling drm/i915/gvt: Update force-to-nonpriv register whitelist drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack ima: show rules with IMA_INMASK correctly evm: check hash algorithm passed to init_desc() scsi: libsas: delete sas port if expander discover failed scsi: libsas: only clear phy->in_shutdown after shutdown event done scsi: scsi_dh_alua: Fix possible null-ptr-deref scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs) scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route() net: phy: dp83867: Set up RGMII TX delay net: phy: dp83867: do not call config_init twice net: phy: dp83867: increase SGMII autoneg timer duration net: phy: dp83867: fix speed 10 in sgmii mode net: phy: marvell10g: report if the PHY fails to boot firmware net: phylink: ensure consistent phy interface mode cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css() blk-mq: Fix memory leak in error handling usbip: usbip_host: fix stub_dev lock context imbalance regression net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs MIPS: uprobes: remove set but not used variable 'epc' s390/crypto: fix possible sleep during spinlock aquired MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM RDMA/efa: Remove MAYEXEC flag check from mmap flow mlx5: avoid 64-bit division IB/hfi1: Validate page aligned for a given virtual address IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/rdmavt: Fix alloc_qpn() WARN_ON() ASoC: sun4i-codec: fix first delay on Speaker drm/amdgpu: reserve stollen vram for raven series media: venus: hfi_parser: fix a regression in parser selftests: bpf: fix compiler warning in flow_dissector test arm64: use the correct function type for __arm64_sys_ni_syscall arm64: use the correct function type in SYSCALL_DEFINE0 arm64: fix syscall_fn_t type block: don't protect generic_make_request_checks with blk_queue_enter block: move blk_exit_queue into __blk_release_queue selftests: bpf: complete sub-register zero extension checks selftests: bpf: move sub-register zero extension checks into subreg.c ovl: detect overlapping layers drm/i915/icl: Add WaDisableBankHangMode ALSA: fireface: Use ULL suffixes for 64-bit constants signal/arm64: Use force_sig not force_sig_fault for SIGKILL nl80211: fill all policy .type entries mac80211: free peer keys before vif down in mesh ANDROID: ABI out: Use the extension .xml rather then .out drm/mediatek: respect page offset for PRIME mmap calls drm/mediatek: adjust ddp clock control flow ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled" net/mlx5e: Disable rxhash when CQE compress is enabled net/mlx5e: restrict the real_dev of vlan device is the same as uplink device net/mlx5: Allocate root ns memory using kzalloc to match kfree net/mlx5: Avoid double free in fs init error unwinding path net/mlx5: Avoid double free of root ns in the error flow path net/mlx5: Fix error handling in mlx5_load() Documentation: net-sysfs: Remove duplicate PHY device documentation llc: fix skb leak in llc_build_and_send_ui_pkt() selftests: pmtu: Fix encapsulating device in pmtu_vti6_link_change_mtu dfs_cache: fix a wrong use of kfree in flush_cache_ent() fs/cifs/smb2pdu.c: fix buffer free in SMB2_ioctl_free cifs: fix memory leak of pneg_inbuf on -EOPNOTSUPP ioctl case xenbus: Avoid deadlock during suspend due to open transactions xen/pvcalls: Remove set but not used variable tracing: Avoid memory leak in predicate_parse() habanalabs: fix bug in checking huge page optimization mmc: sdhci: Fix SDIO IRQ thread deadlock dpaa_eth: use only online CPU portals net: mvneta: Fix err code path of probe net: stmmac: Do not output error on deferred probe Btrfs: fix race updating log root item during fsync Btrfs: fix wrong ctime and mtime of a directory after log replay ARC: [plat-hsdk] Get rid of inappropriate PHY settings ARC: [plat-hsdk]: Add support of Vivante GPU ARC: [plat-hsdk]: enable creg-gpio controller Btrfs: fix fsync not persisting changed attributes of a directory btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON() Btrfs: incremental send, fix emission of invalid clone operations Btrfs: incremental send, fix file corruption when no-holes feature is enabled btrfs: correct zstd workspace manager lock to use spin_lock_bh() btrfs: Ensure replaced device doesn't have pending chunk allocation ia64: fix build errors by exporting paddr_to_nid() ASoC: SOF: Intel: hda: fix the hda init chip ASoC: SOF: ipc: fix a race, leading to IPC timeouts ASoC: SOF: control: correct the copy size for bytes kcontrol put ASoC: SOF: pcm: remove warning - initialize workqueue on open ASoC: SOF: pcm: clear hw_params_upon_resume flag correctly ASoC: SOF: core: fix error handling with the probe workqueue ASoC: SOF: core: remove snd_soc_unregister_component in case of error ASoC: SOF: core: remove DSP after unregistering machine driver ASoC: soc-core: fixup references at soc_cleanup_card_resources() arm64/module: revert to unsigned interpretation of ABS16/32 relocations KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID kvm: fix compile on s390 part 2 xprtrdma: Use struct_size() in kzalloc() tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Fix s390 missing module symbol and warning for non-root users perf machine: Read also the end of the kernel perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms perf session: Add missing swap ops for namespace events perf namespace: Protect reading thread's namespace tools headers UAPI: Sync drm/drm.h with the kernel s390/crypto: fix gcm-aes-s390 selftest failures s390/zcrypt: Fix wrong dispatching for control domain CPRBs s390/pci: fix assignment of bus resources s390/pci: fix struct definition for set PCI function s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline s390: add unreachable() to dump_fault_info() to fix -Wmaybe-uninitialized tools headers UAPI: Sync drm/i915_drm.h with the kernel tools headers UAPI: Sync linux/fs.h with the kernel tools headers UAPI: Sync linux/sched.h with the kernel tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel perf data: Fix 'strncat may truncate' build failure with recent gcc arm64: Fix the arm64_personality() syscall wrapper redirection rtw88: Make some symbols static rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex rsi: Properly initialize data in rsi_sdio_ta_reset rtw88: fix unassigned rssi_level in rtw_sta_info rtw88: fix subscript above array bounds compiler warning fuse: extract helper for range writeback fuse: fix copy_file_range() in the writeback case mmc: meson-gx: fix irq ack mmc: tmio: fix SCC error handling to avoid false positive CRC error mmc: tegra: Fix a warning message memstick: mspro_block: Fix an error code in mspro_block_issue_req() mac80211: mesh: fix RCU warning nl80211: fix station_info pertid memory leak mac80211: Do not use stack memory with scatterlist for GMAC ALSA: line6: Assure canceling delayed work at disconnection configfs: Fix use-after-free when accessing sd->s_dentry ALSA: hda - Force polling mode on CNL for fixing codec communication i2c: synquacer: fix synquacer_i2c_doxfer() return value i2c: mlxcpld: Fix wrong initialization order in probe i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr RDMA/core: Fix panic when port_data isn't initialized RDMA/uverbs: Pass udata on uverbs error unwind RDMA/core: Clear out the udata before error unwind net: aquantia: tcp checksum 0xffff being handled incorrectly net: aquantia: fix LRO with FCS error net: aquantia: check rx csum for all packets in LRO session net: aquantia: tx clean budget logic error vhost: scsi: add weight support vhost: vsock: add weight support vhost_net: fix possible infinite loop vhost: introduce vhost_exceeds_weight() virtio: Fix indentation of VIRTIO_MMIO virtio: add unlikely() to WARN_ON_ONCE() iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type drm/etnaviv: lock MMU while dumping core block: Don't revalidate bdev of hidden gendisk loop: Don't change loop device under exclusive opener drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q drm/qxl: drop WARN_ONCE() iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit fuse: add FUSE_WRITE_KILL_PRIV fuse: fallocate: fix return with locked inode PCI: PM: Avoid possible suspend-to-idle issue ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation ACPI/PCI: PM: Add missing wakeup.flags.valid checks ovl: support the FS_IOC_FS[SG]ETXATTR ioctls soundwire: stream: fix out of boundary access on port properties net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE() selftests/tls: add test for sleeping even though there is data net/tls: fix no wakeup on partial reads selftests/tls: test for lowat overshoot with multiple records net/tls: fix lowat calculation if some data came from previous record dpaa2-eth: Make constant 64-bit long dpaa2-eth: Use PTR_ERR_OR_ZERO where appropriate dpaa2-eth: Fix potential spectre issue bonding/802.3ad: fix slave link initialization transition states io_uring: Fix __io_uring_register() false success net: ethtool: Document get_rxfh_context and set_rxfh_context ethtool ops net: stmmac: dwmac-mediatek: modify csr_clk value to fix mdio read/write fail net: stmmac: fix csr_clk can't be zero issue net: stmmac: update rx tail pointer register to fix rx dma hang issue. ip_sockglue: Fix missing-check bug in ip_ra_control() ipv6_sockglue: Fix a missing-check bug in ip6_ra_control() efi: Allow the number of EFI configuration tables entries to be zero efi/x86/Add missing error handling to old_memmap 1:1 mapping code parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal bpf: sockmap, fix use after free from sleep in psock backlog workqueue net: sched: don't use tc_action->order during action dump cxgb4: Revert "cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size" net: fec: fix the clk mismatch in failed_reset path habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close selftests: rtc: rtctest: specify timeouts selftests/harness: Allow test to configure timeout selftests/ftrace: Add checkbashisms meta-testcase selftests/ftrace: Make a script checkbashisms clean media: smsusb: better handle optional alignment test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs drm/amd/display: Don't load DMCU for Raven 1 (v2) drm/i915: Maintain consistent documentation subsection ordering scripts/sphinx-pre-install: make it handle Sphinx versions docs: Fix conf.py for Sphinx 2.0 vt/fbcon: deinitialize resources in visual_init() after failed memory allocation xfs: fix broken log reservation debugging clocksource/drivers/timer-ti-dm: Change to new style declaration ASoC: core: lock client_mutex while removing link components ASoC: simple-card: Restore original configuration of DAI format {nl,mac}80211: allow 4addr AP operation on crypto controlled devices mac80211_hwsim: mark expected switch fall-through mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he() mac80211: remove set but not used variable 'old' mac80211: handle deauthentication/disassociation from TDLS peer gpio: fix gpio-adp5588 build errors pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not defined staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000' perf/ring-buffer: Use regular variables for nesting perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data perf/ring_buffer: Add ordering to rb->nest increment perf/ring_buffer: Fix exposing a temporarily decreased data_head x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor x86/boot: Provide KASAN compatible aliases for string routines ALSA: hda/realtek - Enable micmute LED for Huawei laptops Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD Input: silead - add MSSL0017 to acpi_device_id cxgb4: offload VLAN flows regardless of VLAN ethtype hsr: fix don't prune the master node from the node_db net: mvpp2: cls: Fix leaked ethtool_rx_flow_rule docs: fix multiple doc build warnings in enumeration.rst lib/list_sort: fix kerneldoc build error docs: fix numaperf.rst and add it to the doc tree doc: Cope with the deprecation of AutoReporter doc: Cope with Sphinx logging deprecations bpf: sockmap, restore sk_write_space when psock gets dropped selftests: bpf: add zero extend checks for ALU32 and/or/xor bpf, riscv: clear target register high 32-bits for and/or/xor on ALU32 spi: abort spi_sync if failed to prepare_transfer_hardware ALSA: hda/realtek - Set default power save node to 0 ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load() MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline ipv4/igmp: fix another memory leak in igmpv3_del_delrec() bnxt_en: Device serial number is supported only for PFs. bnxt_en: Reduce memory usage when running in kdump kernel. bnxt_en: Fix possible BUG() condition when calling pci_disable_msix(). bnxt_en: Fix aggregation buffer leak under OOM condition. ipv6: Fix redirect with VRF net: stmmac: fix reset gpio free missing mISDN: make sure device name is NUL terminated net: macb: save/restore the remaining registers and features media: dvb: warning about dvb frequency limits produces too much noise net/tls: don't ignore netdev notifications if no TLS features net/tls: fix state removal with feature flags off net/tls: avoid NULL-deref on resync during device removal Documentation: add TLS offload documentation Documentation: tls: RSTify the ktls documentation Documentation: net: move device drivers docs to a submenu mISDN: Fix indenting in dsp_cmx.c ocelot: Dont allocate another multicast list, use __dev_mc_sync Validate required parameters in inet6_validate_link_af xhci: Use %zu for printing size_t type xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() xhci: Fix immediate data transfer if buffer is already DMA mapped usb: xhci: avoid null pointer deref when bos field is NULL usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint() xhci: update bounce buffer with correct sg num media: usb: siano: Fix false-positive "uninitialized variable" warning spi: spi-fsl-spi: call spi_finalize_current_message() at the end ALSA: hda/realtek - Check headset type by unplug and resume powerpc/perf: Fix MMCRA corruption by bhrb_filter powerpc/powernv: Return for invalid IMC domain HID: logitech-hidpp: Add support for the S510 remote control HID: multitouch: handle faulty Elo touch device selftests: netfilter: add flowtable test script netfilter: nft_flow_offload: IPCB is only valid for ipv4 family netfilter: nft_flow_offload: don't offload when sequence numbers need adjustment netfilter: nft_flow_offload: set liberal tracking mode for tcp netfilter: nf_flow_table: ignore DF bit setting ASoC: Intel: sof-rt5682: fix AMP quirk support ASoC: Intel: sof-rt5682: fix for codec button mapping clk: ti: clkctrl: Fix clkdm_clk handling clk: imx: imx8mm: fix int pll clk gate clk: sifive: restrict Kconfig scope for the FU540 PRCI driver RDMA/hns: Fix PD memory leak for internal allocation netfilter: nat: fix udp checksum corruption selftests: netfilter: missing error check when setting up veth interface RDMA/srp: Rename SRP sysfs name after IB device rename trigger ipvs: Fix use-after-free in ip_vs_in ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node samples, bpf: suppress compiler warning samples, bpf: fix to change the buffer size for read() bpf: Check sk_fullsock() before returning from bpf_sk_lookup() bpf: fix out-of-bounds read in __bpf_skc_lookup Documentation/networking: fix af_xdp.rst Sphinx warnings netfilter: nft_fib: Fix existence check support netfilter: nf_queue: fix reinject verdict handling dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status tty: max310x: Fix external crystal register setup serial: sh-sci: disable DMA for uart_console serial: imx: remove log spamming error message tty: serial: msm_serial: Fix XON/XOFF USB: serial: option: add Telit 0x1260 and 0x1261 compositions USB: serial: pl2303: add Allied Telesis VT-Kit3 USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints USB: rio500: update Documentation USB: rio500: simplify locking USB: rio500: fix memory leak in close after disconnect USB: rio500: refuse more than one device at a time usbip: usbip_host: fix BUG: sleeping function called from invalid context USB: sisusbvga: fix oops in error path of sisusb_probe USB: Add LPM quirk for Surface Dock GigE adapter media: usb: siano: Fix general protection fault in smsusb usb: mtu3: fix up undefined reference to usb_debug_root USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor Input: elantech - enable middle button support on 2 ThinkPads dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon gcc-plugins: Fix build failures under Darwin host MAINTAINERS: Update Stefan Wahren email address netfilter: nf_tables: fix oops during rule dump ARC: mm: SIGSEGV userspace trying to access kernel virtual memory ARC: fix build warnings ARM: dts: bcm: Add missing device_type = "memory" property soc: bcm: brcmstb: biuctrl: Register writes require a barrier soc: brcmstb: Fix error path for unsupported CPUs ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ASoC: simple-card: Fix configuration of DAI format ASoC: Intel: soc-acpi: Fix machine selection order ASoC: rt5677-spi: Handle over reading when flipping bytes ASoC: soc-dpm: fixup DAI active unbalance pinctrl: intel: Clear interrupt status in mask/unmask callback pinctrl: intel: Use GENMASK() consistently parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup() staging: vc04_services: prevent integer overflow in create_pagelist() Staging: vc04_services: Fix a couple error codes staging: wlan-ng: fix adapter initialization failure staging: kpc2000: double unlock in error handling in kpc_dma_transfer() staging: kpc2000: Fix build error without CONFIG_UIO staging: kpc2000: fix build error on xtensa staging: erofs: set sb->s_root to NULL when failing from __getname() ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready arm64: imx: Fix build error without CONFIG_SOC_BUS ima: fix wrong signed policy requirement when not appraising x86/ima: Check EFI_RUNTIME_SERVICES before using stacktrace: Unbreak stack_trace_save_tsk_reliable() HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact HID: wacom: Don't report anything prior to the tool entering range HID: wacom: Don't set tool type until we're in range ASoC: cs42xx8: Add regcache mask dirty regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer ASoC: fsl_asrc: Fix the issue about unsupported rate spi: bitbang: Fix NULL pointer dereference in spi_unregister_master Input: elan_i2c - increment wakeup count if wake source wireless: Skip directory when generating certificates ASoC: ak4458: rstn_control - return a non-zero on error only ASoC: soc-pcm: BE dai needs prepare when pause release after resume ASoC: ak4458: add return value for ak4458_probe ASoC : cs4265 : readable register too low ASoC: SOF: fix error in verbose ipc command parsing ASoC: SOF: fix race in FW boot timeout handling ASoC: SOF: nocodec: fix undefined reference iio: adc: ti-ads8688: fix timestamp is not updated in buffer iio: dac: ds4422/ds4424 fix chip verification HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5 HID: logitech-hidpp: add support for the MX5500 keyboard HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver HID: i2c-hid: add iBall Aer3 to descriptor override spi: Fix Raspberry Pi breakage ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ARM: dts: Configure osc clock for d_can on am335x iio: imu: mpu6050: Fix FIFO layout for ICM20602 lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical iio: adc: ads124: avoid buffer overflow iio: adc: modify NPCM ADC read reference voltage Change-Id: I98c823993370027391cc21dfb239c3049f025136 Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>	2019-07-01 17:41:24 -07:00
Stefan Raspl	883d25e70b	tools/kvm_stat: fix fields filter for child events ... The fields filter would not work with child fields, as the respective parents would not be included. No parents displayed == no childs displayed. To reproduce, run on s390 (would work on other platforms, too, but would require a different filter name): - Run 'kvm_stat -d' - Press 'f' - Enter 'instruct' Notice that events like instruction_diag_44 or instruction_diag_500 are not displayed - the output remains empty. With this patch, we will filter by matching events and their parents. However, consider the following example where we filter by instruction_diag_44: kvm statistics - summary regex filter: instruction_diag_44 Event Total %Total CurAvg/s exit_instruction 276 100.0 12 instruction_diag_44 256 92.8 11 Total 276 12 Note that the parent ('exit_instruction') displays the total events, but the childs listed do not match its total (256 instead of 276). This is intended (since we're filtering all but one child), but might be confusing on first sight. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2019-05-24 21:27:17 +02:00
Stefan Raspl	09f70c3b70	tools/kvm_stat: switch to python3 ... The current shebang does not work in environments that only support python3 and have no python2 installed. Plus there does not seem to be a way to support python2 and python3 at the same time. Since all known python3 issues were fixed, and as python3 is the way to go, let's switch over. Note that the code is still python2 compliant, so folks in bad use can simply revert the shebang. Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-11-27 12:53:44 +01:00
Stefan Raspl	fe804cd677	tools/kvm_stat: cut down decimal places in update interval dialog ... We currently display the default number of decimal places for floats in _show_set_update_interval(), which is quite pointless. Cutting down to a single decimal place. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-10-01 15:40:59 +02:00
Stefan Raspl	c012a0f267	tools/kvm_stat: re-animate display of dead guests ... When filtering by guest (interactive commands 'p'/'g'), and the respective guest was destroyed, detect when the guest is up again through the guest name if possible. I.e. when displaying events for a specific guest, it is not necessary anymore to restart kvm_stat in case the guest is restarted. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	404517e408	tools/kvm_stat: indicate dead guests as such ... For destroyed guests, kvm_stat essentially freezes with the last data displayed. This is acceptable for users, in case they want to inspect the final data. But it looks a bit irritating. Therefore, detect this situation and display a respective indicator in the header. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	29c39f38e4	tools/kvm_stat: handle guest removals more gracefully ... When running with the DebugFS provider, removal of a guest can result in a negative CurAvg/s, which looks rather confusing. If so, suppress the body refresh and print a message instead. To reproduce, have at least one guest A completely booted. Then start another guest B (which generates a huge amount of events), then destroy B. On the next refresh, kvm_stat should display a whole lot of negative values in the CurAvg/s column. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	0db8b31023	tools/kvm_stat: don't reset stats when setting PID filter for debugfs ... When setting a PID filter in debugfs, we unnecessarily reset the statistics, although there is no reason to do so. This behavior was merely introduced with commit 9f114a03c6 "tools/kvm_stat: add interactive command 'r'", most likely to mimic the behavior of the tracepoints provider in this respect. However, there are plenty of differences between the two providers, so there is no reason not to take advantage of the possibility to filter by PID without resetting the statistics. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	710ab11ad9	tools/kvm_stat: fix updates for dead guests ... With pid filtering active, when a guest is removed e.g. via virsh shutdown, successive updates produce garbage. Therefore, we add code to detect this case and prevent further body updates. Note that when displaying the help dialog via 'h' in this case, once we exit we're stuck with the 'Collecting data...' message till we remove the filter. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	617c66b9f2	tools/kvm_stat: fix handling of invalid paths in debugfs provider ... When filtering by guest, kvm_stat displays garbage when the guest is destroyed - see sample output below. We add code to remove the invalid paths from the providers, so at least no more garbage is displayed. Here's a sample output to illustrate: kvm statistics - pid 13986 (foo) Event Total %Total CurAvg/s diagnose_258 -2 0.0 0 deliver_program_interruption -3 0.0 0 diagnose_308 -4 0.0 0 halt_poll_invalid -91 0.0 -6 deliver_service_signal -244 0.0 -16 halt_successful_poll -250 0.1 -17 exit_pei -285 0.1 -19 exit_external_request -312 0.1 -21 diagnose_9c -328 0.1 -22 userspace_handled -713 0.1 -47 halt_attempted_poll -939 0.2 -62 deliver_emergency_signal -3126 0.6 -208 halt_wakeup -7199 1.5 -481 exit_wait_state -7379 1.5 -493 diagnose_500 -56499 11.5 -3757 exit_null -85491 17.4 -5685 diagnose_44 -133300 27.1 -8874 exit_instruction -195898 39.8 -13037 Total -492063 Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Stefan Raspl	58f33cfe73	tools/kvm_stat: fix python3 issues ... Python3 returns a float for a regular division - switch to a division operator that returns an integer. Furthermore, filters return a generator object instead of the actual list - wrap result in yet another list, which makes it still work in both, Python2 and 3. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-08-30 17:15:12 +02:00
Cole Robinson	1f97e01a38	tools/kvm_stat: Remove unused function ... Unused since added in 18e8f4100 Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-and-tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-03-28 22:47:06 +02:00
Cole Robinson	0866c31bf3	tools/kvm_stat: Don't use deprecated file() ... $ python3 tools/kvm/kvm_stat/kvm_stat Traceback (most recent call last): File "tools/kvm/kvm_stat/kvm_stat", line 1668, in <module> main() File "tools/kvm/kvm_stat/kvm_stat", line 1639, in main assign_globals() File "tools/kvm/kvm_stat/kvm_stat", line 1618, in assign_globals for line in file('/proc/mounts'): NameError: name 'file' is not defined open() is the python3 way, and works on python2.6+ Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-and-tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-03-28 22:47:06 +02:00
Cole Robinson	6ade1ae84c	tools/kvm_stat: Fix python3 syntax ... $ python3 tools/kvm/kvm_stat/kvm_stat File "tools/kvm/kvm_stat/kvm_stat", line 1137 def sortkey((_k, v)): ^ SyntaxError: invalid syntax Fix it in a way that's compatible with python2 and python3 Signed-off-by: Cole Robinson <crobinso@redhat.com> Tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2018-03-28 22:47:06 +02:00
Stefan Raspl	6789af030a	tools/kvm_stat: print 'Total' line for multiple events only ... The 'Total' line looks a bit weird when we have a single event only. This can happen e.g. due to filters. Therefore suppress when there's only a single event in the output. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:46 +01:00
Stefan Raspl	df72ecfc79	tools/kvm_stat: group child events indented after parent ... We keep the current logic that sorts all events (parent and child), but re-shuffle the events afterwards, grouping the children after the respective parent. Note that the percentage column for child events gives the percentage of the parent's total. Since we rework the logic anyway, we modify the total average calculation to use the raw numbers instead of the (rounded) averages. Note that this can result in differing numbers (between total average and the sum of the individual averages) due to rounding errors. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:45 +01:00
Stefan Raspl	18e8f4100e	tools/kvm_stat: separate drilldown and fields filtering ... Drilldown (i.e. toggle display of child trace events) was implemented by overriding the fields filter. This resulted in inconsistencies: E.g. when drilldown was not active, adding a filter that also matches child trace events would not only filter fields according to the filter, but also add in the child trace events matching the filter. E.g. on x86, setting 'kvm_userspace_exit' as the fields filter after startup would result in display of kvm_userspace_exit(DCR), although that wasn't previously present - not exactly what one would expect from a filter. This patch addresses the issue by keeping drilldown and fields filter separate. While at it, we also fix a PEP8 issue by adding a blank line at one place (since we're in the area...). We implement this by adding a framework that also allows to define a taxonomy among the debugfs events to identify child trace events. I.e. drilldown using 'x' can now also work with debugfs. A respective parent- child relationship is only known for S390 at the moment, but could be added adjusting other platforms' ARCH.dbg_is_child() methods accordingly. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:44 +01:00
Stefan Raspl	516f1190a1	tools/kvm_stat: eliminate extra guest/pid selection dialog ... We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:44 +01:00
Stefan Raspl	c0e8c21eae	tools/kvm_stat: mark private methods as such ... Helps quite a bit reading the code when it's obvious when a method is intended for internal use only. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:43 +01:00
Stefan Raspl	1fd6a708c8	tools/kvm_stat: fix debugfs handling ... Te checks for debugfs assumed that debugfs is always mounted at /sys/kernel/debug - which is likely, but not guaranteed. This is addressed by checking /proc/mounts for the actual location. Furthermore, when debugfs was mounted, but the kvm module not loaded, a misleading error pointing towards debugfs not present was given. To reproduce, (a) run kvm_stat with debugfs mounted at a place different from /sys/kernel/debug (b) run kvm_stat with debugfs mounted but kvm module not loaded Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:42 +01:00
Stefan Raspl	1cd8bfb1ed	tools/kvm_stat: print error on invalid regex ... Entering an invalid regular expression did not produce any indication of an error so far. To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:41 +01:00
Stefan Raspl	3df33a0f34	tools/kvm_stat: fix crash when filtering out all non-child trace events ... When we apply a filter that will only leave child trace events, we receive a ZeroDivisionError when calculating the percentages. In that case, provide percentages based on child events only. To reproduce, run 'kvm_stat -f .*[\(].*'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:41 +01:00
Marc Hartmayer	369d5a85bb	tools/kvm_stat: avoid 'is' for equality checks ... Use '==' for equality checks and 'is' when comparing identities. An example where '==' and 'is' behave differently: >>> a = 4242 >>> a == 4242 True >>> a is 4242 False Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:40 +01:00
Marc Hartmayer	0eb578009a	tools/kvm_stat: use a more pythonic way to iterate over dictionaries ... If it's clear that the values of a dictionary will be used then use the '.items()' method. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> [Include fix for logging mode by Stefan Raspl] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:39 +01:00
Marc Hartmayer	006f1548ac	tools/kvm_stat: use a namedtuple for storing the values ... Use a namedtuple for storing the values as it allows to access the fields of a tuple via names. This makes the overall code much easier to read and to understand. Access by index is still possible as before. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:39 +01:00
Marc Hartmayer	faa312a543	tools/kvm_stat: simplify the sortkey function ... The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2018-02-24 01:43:38 +01:00
Stefan Raspl	aa12f594f9	tools/kvm_stat: sort '-f help' output ... Sort the fields returned by specifying '-f help' on the command line. While at it, simplify the code a bit, indent the output and eliminate an extra blank line at the beginning. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-21 13:03:32 +01:00
Stefan Raspl	cf656c7661	tools/kvm_stat: add line for totals ... Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:47 +01:00
Stefan Raspl	73fab6ffbd	tools/kvm_stat: stop ignoring unhandled arguments ... Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:46 +01:00
Stefan Raspl	822cfe3e48	tools/kvm_stat: suppress usage information on command line errors ... Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:46 +01:00
Stefan Raspl	08e20a6300	tools/kvm_stat: handle invalid regular expressions ... Passing an invalid regular expression on the command line results in a traceback. Note that interactive specification of invalid regular expressions is not affected To reproduce, run "kvm_stat -f '*'". Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:45 +01:00
Stefan Raspl	f3d11b0e86	tools/kvm_stat: add hint on '-f help' to man page ... The man page update for this new functionality was omitted. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:44 +01:00
Stefan Raspl	fff8c9eb48	tools/kvm_stat: fix child trace events accounting ... Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:44 +01:00
Stefan Raspl	b74faa930d	tools/kvm_stat: fix extra handling of 'help' with fields filter ... Commit 67fbcd62f5 ("tools/kvm_stat: add '-f help' to get the available event list") added support for '-f help'. However, the extra handling of 'help' will also take effect when 'help' is specified as a regex in interactive mode via 'f'. This results in display of all events while only those matching this regex should be shown. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:43 +01:00
Stefan Raspl	67c162b089	tools/kvm_stat: fix missing field update after filter change ... When updating the fields filter, tracepoint events of fields previously not visible were not enabled, as TracepointProvider.update_fields() updated the member variable directly instead of using the setter, which triggers the event enable/disable. To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the filter, and notice that no add'l fields that do not match the regex 'kvm_exit' will appear. This issue was introduced by commit c469117df0 ("tools/kvm_stat: simplify initializers"). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:42 +01:00
Stefan Raspl	faa0665041	tools/kvm_stat: fix drilldown in events-by-guests mode ... When displaying debugfs events listed by guests, an attempt to switch to reporting of stats for individual child trace events results in garbled output. Reason is that when toggling drilldown, the update of the stats doesn't honor when events are displayed by guests, as indicated by Tui._display_guests. To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:42 +01:00
Stefan Raspl	19e8e54f43	tools/kvm_stat: fix command line option '-g' ... Specifying a guest via '-g foo' always results in an error: $ kvm_stat -g foo Usage: kvm_stat [options] kvm_stat: error: Error while searching for guest "foo", use "-p" to specify a pid instead Reason is that Tui.get_pid_from_gname() is not static, as it is supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-12-14 09:25:41 +01:00
Linus Torvalds	974aa5630b	Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm ... Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...	2017-11-16 13:00:24 -08:00
Greg Kroah-Hartman	b24413180f	License cleanup: add SPDX GPL-2.0 license identifier to files with no license ... Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2017-11-02 11:10:55 +01:00
Jeremy Cline	9cc5fbbb8c	tools/kvm_stat: Add Python 3 support to kvm_stat ... Make kvm_stat support Python 3 by changing the use of "print" to a function rather than a statement, switching from "iteritems" and "iterkeys" (removed in Python 3) to "items" and "keys" respectively, and decoding bytes to strings when dealing with text. With this change, kvm_stat is usable with Python 2.6 and greater. Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>	2017-10-12 14:01:50 +02:00
Lin Ma	67fbcd62f5	tools/kvm_stat: add '-f help' to get the available event list ... Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-07-26 19:04:53 +02:00
Lin Ma	efcb521943	tools/kvm_stat: use variables instead of hard paths in help output ... Using variables instead of hard paths makes the requirements information more accurate. Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-07-26 19:04:52 +02:00
Stefan Raspl	5c1954d25d	tools/kvm_stat: add new interactive command 'b' ... Toggle display total number of events by guest (debugfs only). When switching to display of events by guest, field filters remain active. I.e. the number of events per guest reported considers only events matching the filters. Likewise with pid/guest filtering. Note that when switching to display of events by guest, DebugfsProvider remains to collect data for events as it did before, but the read() method summarizes the values by pid. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-27 16:44:50 +02:00
Stefan Raspl	ab7ef193fa	tools/kvm_stat: add new command line switch '-i' ... It might be handy to display the full history of event stats to compare the current event distribution against any available historic data. Since we have that available for debugfs, we offer a respective command line option to display what's available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-27 16:43:48 +02:00
Stefan Raspl	61f381bb7e	tools/kvm_stat: fix error on interactive command 'g' ... Fix an instance where print_all_gnames() is called without the mandatory argument, resulting in a stack trace. To reproduce, simply press 'g' in interactive mode. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-27 16:41:55 +02:00
Stefan Raspl	865279c53c	tools/kvm_stat: display guest list in pid/guest selection screens ... Display a (possibly inaccurate) list of all running guests. Note that we leave a bit of extra room above the list for potential error messages. Furthermore, we deliberately do not reject pids or guest names that are not in our list, as we cannot rule out that our fuzzy approach might be in error somehow. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-08 18:24:49 +02:00
Stefan Raspl	6667ae8f39	tools/kvm_stat: add new interactive command 'o' ... Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default) and 'Total' columns. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-08 18:24:48 +02:00
Stefan Raspl	64eefad2cd	tools/kvm_stat: add new interactive command 's' ... Add new command 's' to modify the update interval. Limited to a maximum of 25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer and shorter delays respectively. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-08 18:20:21 +02:00
Stefan Raspl	1fdea7b289	tools/kvm_stat: add new interactive command 'h' ... Display interactive commands reference on 'h'. While at it, sort interactive commands alphabetically in various places. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-08 18:17:59 +02:00
Stefan Raspl	38e89c37a1	tools/kvm_stat: rename 'Current' column to 'CurAvg/s' ... 'Current' can be misleading as it doesn't tell whether this is the amount of events in the last interval or the current average per second. Note that this necessitates widening the respective column by one more character. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>	2017-06-08 18:17:37 +02:00