71 Commits

Author	SHA1	Message	Date
Raghavendra Rao Ananta	5bd75403be	Merge remote-tracking branch 'remotes/origin/tmp-f686d9f' into msm-lahaina ... * remotes/origin/tmp-f686d9f: ANDROID: update abi_gki_aarch64.xml for 5.2-rc6 Linux 5.2-rc6 Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock" Bluetooth: Fix regression with minimum encryption key size alignment tcp: refine memory limit test in tcp_fragment() x86/vdso: Prevent segfaults due to hoisted vclock reads SUNRPC: Fix a credential refcount leak Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE" net :sunrpc :clnt :Fix xps refcount imbalance on the error path NFS4: Only set creation opendata if O_CREAT ANDROID: gki_defconfig: workaround to enable configs ANDROID: gki_defconfig: more configs for partners ARM: 8867/1: vdso: pass --be8 to linker if necessary KVM: nVMX: reorganize initial steps of vmx_set_nested_state KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries habanalabs: use u64_to_user_ptr() for reading user pointers nfsd: replace Jeff by Chuck as nfsd co-maintainer inet: clear num_timeout reqsk_alloc() PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present net: mvpp2: debugfs: Add pmap to fs dump ipv6: Default fib6_type to RTN_UNICAST when not set net: hns3: Fix inconsistent indenting net/af_iucv: always register net_device notifier net/af_iucv: build proper skbs for HiperTransport net/af_iucv: remove GFP_DMA restriction for HiperTransport doc: fix documentation about UIO_MEM_LOGICAL using MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk docs: fb: Add TER16x32 to the available font names MAINTAINERS: fpga: hand off maintainership to Moritz treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 484 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 481 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 480 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 479 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 477 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 475 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 474 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 473 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 472 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 471 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 469 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 468 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 467 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 466 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 465 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 464 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 463 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 462 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 461 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 460 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 457 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 456 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 455 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 454 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 452 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 451 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 250 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 248 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 247 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 246 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 245 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 244 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 243 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 239 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 238 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 237 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 232 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 231 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 230 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 226 KVM: arm/arm64: Fix emulated ptimer irq injection net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge() tests: kvm: Check for a kernel warning kvm: tests: Sort tests in the Makefile alphabetically KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT KVM: x86: Modify struct kvm_nested_state to have explicit fields for data fanotify: update connector fsid cache on add mark quota: fix a problem about transfer quota drm/i915: Don't clobber M/N values during fastset check powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac ovl: make i_ino consistent with st_ino in more cases scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information hvsock: fix epollout hang from race condition net/udp_gso: Allow TX timestamp with UDP GSO net: netem: fix use after free and double free with packet corruption net: netem: fix backlog accounting for corrupted GSO frames net: lio_core: fix potential sign-extension overflow on large shift tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL apparmor: reset pos on failure to unpack for various functions apparmor: enforce nullbyte at end of tag string apparmor: fix PROFILE_MEDIATES for untrusted input RDMA/efa: Handle mmap insertions overflow tun: wake up waitqueues after IFF_UP is set drm: return -EFAULT if copy_to_user() fails net: remove duplicate fetch in sock_getsockopt tipc: fix issues with early FAILOVER_MSG from peer bnx2x: Check if transceiver implements DDM before access xhci: detect USB 3.2 capable host controllers correctly usb: xhci: Don't try to recover an endpoint if port is in error state. KVM: fix typo in documentation drm/panfrost: Make sure a BO is only unmapped when appropriate md: fix for divide error in status_resync soc: ixp4xx: npe: Fix an IS_ERR() vs NULL check in probe arm64/mm: don't initialize pgd_cache twice MAINTAINERS: Update my email address arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h> ovl: fix typo in MODULE_PARM_DESC ovl: fix bogus -Wmaybe-unitialized warning ovl: don't fail with disconnected lower NFS mmc: core: Prevent processing SDIO IRQs when the card is suspended mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning brcmfmac: sdio: Don't tune while the card is off mmc: core: Add sdio_retune_hold_now() and sdio_retune_release() brcmfmac: sdio: Disable auto-tuning around commands expected to fail mmc: core: API to temporarily disable retuning for SDIO CRC errors Revert "brcmfmac: disable command decode in sdio_aos" ARM: ixp4xx: include irqs.h where needed ARM: ixp4xx: mark ixp4xx_irq_setup as __init ARM: ixp4xx: don't select SERIAL_OF_PLATFORM firmware: trusted_foundations: add ARMv7 dependency usb: dwc2: Use generic PHY width in params setup RDMA/efa: Fix success return value in case of error IB/hfi1: Handle port down properly in pio IB/hfi1: Handle wakeup of orphaned QPs for pio IB/hfi1: Wakeup QPs orphaned on wait list after flush IB/hfi1: Use aborts to trigger RC throttling IB/hfi1: Create inline to get extended headers IB/hfi1: Silence txreq allocation warnings IB/hfi1: Avoid hardlockup with flushlist_lock KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr() fs/namespace: fix unprivileged mount propagation vfs: fsmount: add missing mntget() cifs: fix GlobalMid_Lock bug in cifs_reconnect SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write staging: erofs: add requirements field in superblock arm64: ssbd: explicitly depend on <linux/prctl.h> block: fix page leak when merging to same page block: return from __bio_try_merge_page if merging occured in the same page Btrfs: fix failure to persist compression property xattr deletion on fsync riscv: remove unused barrier defines usb: chipidea: udc: workaround for endpoint conflict issue MAINTAINERS: Change QCOM repo location mmc: mediatek: fix SDIO IRQ detection issue mmc: mediatek: fix SDIO IRQ interrupt handle flow mmc: core: complete HS400 before checking status riscv: mm: synchronize MMU after pte change MAINTAINERS: Update my email address to use @kernel.org ANDROID: update abi_gki_aarch64.xml for 5.2-rc5 riscv: dts: add initial board data for the SiFive HiFive Unleashed riscv: dts: add initial support for the SiFive FU540-C000 SoC dt-bindings: riscv: convert cpu binding to json-schema dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 arch: riscv: add support for building DTB files from DT source data drm/i915/gvt: ignore unexpected pvinfo write lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly Linux 5.2-rc5 tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change powerpc/32: fix build failure on book3e with KVM powerpc/booke: fix fast syscall entry on SMP powerpc/32s: fix initial setup of segment registers on secondary CPU x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl tcp: add tcp_rx_skb_cache sysctl sysctl: define proc_do_static_key() hv_netvsc: Set probe mode to sync net: sched: flower: don't call synchronize_rcu() on mask creation net: dsa: fix warning same module names sctp: Free cookie before we memdup a new one net: dsa: microchip: Don't try to read stats for unused ports qmi_wwan: extend permitted QMAP mux_id value range qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode qmi_wwan: add network device usage statistics for qmimux devices qmi_wwan: add support for QMAP padding in the RX path bpf, x64: fix stack layout of JITed bpf code Smack: Restore the smackfsdef mount option and add missing prefixes bpf, devmap: Add missing RCU read lock on flush bpf, devmap: Add missing bulk queue free bpf, devmap: Fix premature entry free on destroying map ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print() gfs2: Fix rounding error in gfs2_iomap_page_prepare net: phylink: further mac_config documentation improvements nfc: Ensure presence of required attributes in the deactivate_target handler btrfs: start readahead also in seed devices x86/kasan: Fix boot with 5-level paging and KASAN cfg80211: report measurement start TSF correctly cfg80211: fix memory leak of wiphy device name cfg80211: util: fix bit count off by one mac80211: do not start any work during reconfigure flow cfg80211: use BIT_ULL in cfg80211_parse_mbssid_data() mac80211: only warn once on chanctx_conf being NULL mac80211: drop robust management frames from unknown TA gpu: ipu-v3: image-convert: Fix image downsize coefficients gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats gpu: ipu-v3: image-convert: Fix input bytesperline width/height align thunderbolt: Implement CIO reset correctly for Titan Ridge ARM: davinci: da8xx: specify dma_coherent_mask for lcdc ARM: davinci: da850-evm: call regulator_has_full_constraints() timekeeping: Repair ktime_get_coarse*() granularity Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops" ANDROID: update abi_gki_aarch64.xml mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() mm/vmscan.c: fix trying to reclaim unevictable LRU page coredump: fix race condition between collapse_huge_page() and core dumping mm/mlock.c: change count_mm_mlocked_page_nr return type mm: mmu_gather: remove __tlb_reset_range() for force flush fs/ocfs2: fix race in ocfs2_dentry_attach_lock() mm/vmscan.c: fix recent_rotated history mm/mlock.c: mlockall error for flag MCL_ONFAULT scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node mm: memcontrol: don't batch updates of local VM stats and events PCI: PM: Skip devices in D0 for suspend-to-idle ANDROID: Removed extraneous configs from gki powerpc/bpf: use unsigned division instruction for 64-bit operations bpf: fix div64 overflow tests to properly detect errors bpf: sync BPF_FIB_LOOKUP flag changes with BPF uapi bpf: simplify definition of BPF_FIB_LOOKUP related flags cifs: add spinlock for the openFileList to cifsInodeInfo cifs: fix panic in smb2_reconnect x86/fpu: Don't use current->mm to check for a kthread KVM: nVMX: use correct clean fields when copying from eVMCS vfio-ccw: Destroy kmem cache region on module exit block/ps3vram: Use %llu to format sector_t after LBDAF removal libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached bcache: fix stack corruption by PRECEDING_KEY() arm64/sve: Fix missing SVE/FPSIMD endianness conversions blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests blkio-controller.txt: Remove references to CFQ block/switching-sched.txt: Update to blk-mq schedulers null_blk: remove duplicate check for report zone blk-mq: no need to check return value of debugfs_create functions io_uring: fix memory leak of UNIX domain socket inode block: force select mq-deadline for zoned block devices binder: fix possible UAF when freeing buffer drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported() ANDROID: x86 gki_defconfig: enable DMA_CMA ANDROID: Fixed x86 regression ANDROID: gki_defconfig: enable DMA_CMA Input: synaptics - enable SMBus on ThinkPad E480 and E580 net: mvpp2: prs: Use the correct helpers when removing all VID filters net: mvpp2: prs: Fix parser range for VID filtering mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2 selftests: tc_flower: Add TOS matching test mlxsw: spectrum_flower: Fix TOS matching selftests: mlxsw: Test nexthop offload indication mlxsw: spectrum_router: Refresh nexthop neighbour when it becomes dead mlxsw: spectrum: Use different seeds for ECMP and LAG hash net: tls, correctly account for copied bytes with multiple sk_msgs vrf: Increment Icmp6InMsgs on the original netdev cpuset: restore sanity to cpuset_cpus_allowed_fallback() net: ethtool: Allow matching on vlan DEI bit linux-next: DOC: RDS: Fix a typo in rds.txt x86/kgdb: Return 0 from kgdb_arch_set_breakpoint() mpls: fix af_mpls dependencies for real selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts() selinux: fix a missing-check bug in selinux_add_mnt_opt( ) arm64: tlbflush: Ensure start/end of address range are aligned to stride usb: typec: Make sure an alt mode exist before getting its partner KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST KVM: arm64: Implement vq_present() as a macro xdp: check device pointer before clearing bpf: net: Set sk_bpf_storage back to NULL for cloned sk Btrfs: fix race between block group removal and block group allocation clocksource/drivers/arm_arch_timer: Don't trace count reader functions i2c: pca-platform: Fix GPIO lookup code thunderbolt: Make sure device runtime resume completes before taking domain lock drm: add fallback override/firmware EDID modes workaround i2c: acorn: fix i2c warning arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGS drm/edid: abstract override/firmware EDID retrieval platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration platform/x86: intel-vbtn: Report switch events when event wakes device platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi ARM: mvebu_v7_defconfig: fix Ethernet on Clearfog x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled x86/resctrl: Don't stop walking closids when a locksetup group is found iommu/arm-smmu: Avoid constant zero in TLBI writes drm/i915/perf: fix whitelist on Gen10+ drm/i915/sdvo: Implement proper HDMI audio support for SDVO drm/i915: Fix per-pixel alpha with CCS drm/i915/dmc: protect against reading random memory drm/i915/dsi: Use a fuzzy check for burst mode clock check Input: imx_keypad - make sure keyboard can always wake up system selinux: log raw contexts as untrusted strings ptrace: restore smp_rmb() in __ptrace_may_access() IB/hfi1: Correct tid qp rcd to match verbs context IB/hfi1: Close PSM sdma_progress sleep window IB/hfi1: Validate fault injection opcode user input geneve: Don't assume linear buffers in error handler vxlan: Don't assume linear buffers in error handler net: openvswitch: do not free vport if register_netdevice() is failed. net: correct udp zerocopy refcnt also when zerocopy only on append drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls riscv: Fix udelay in RV32. drm/vmwgfx: fix a warning due to missing dma_parms riscv: export pm_power_off again drm/vmwgfx: Honor the sg list segment size limitation RISC-V: defconfig: enable clocks, serial console drm/vmwgfx: Use the backdoor port if the HB port is not available bpf: lpm_trie: check left child of last leftmost node for NULL Revert "fuse: require /dev/fuse reads to have enough buffer capacity" ALSA: ice1712: Check correct return value to snd_i2c_sendbytes (EWS/DMX 6Fire) ALSA: oxfw: allow PCM capture for Stanton SCS.1m ALSA: firewire-motu: fix destruction of data for isochronous resources s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline s390/boot: disable address-of-packed-member warning ANDROID: update gki aarch64 ABI representation cgroup: Fix css_task_iter_advance_css_set() cset skip condition drm/panfrost: Require the simple_ondemand governor drm/panfrost: make devfreq optional again drm/gem_shmem: Use a writecombine mapping for ->vaddr mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H ASoC: Intel: sst: fix kmalloc call with wrong flags ASoC: core: Fix deadlock in snd_soc_instantiate_card() cgroup/bfq: revert bfq.weight symlink change ARM: dts: am335x phytec boards: Fix cd-gpios active level ARM: dts: dra72x: Disable usb4_tm target module nfp: ensure skb network header is set for packet redirect tcp: fix undo spurious SYNACK in passive Fast Open mpls: fix af_mpls dependencies ibmvnic: Fix unchecked return codes of memory allocations ibmvnic: Refresh device multicast list after reset ibmvnic: Do not close unopened driver during reset mpls: fix warning with multi-label encap net: phy: rename Asix Electronics PHY driver ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero net: ipv4: fib_semantics: fix uninitialized variable Input: iqs5xx - get axis info before calling input_mt_init_slots() Linux 5.2-rc4 drm: panel-orientation-quirks: Add quirk for GPD MicroPC drm: panel-orientation-quirks: Add quirk for GPD pocket2 counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set x86/fpu: Update kernel's FPU state before using for the fsave header MAINTAINERS: Karthikeyan Ramasubramanian is MIA i2c: xiic: Add max_read_len quirk ANDROID: update ABI representation gpio: pca953x: hack to fix 24 bit gpio expanders net/mlx5e: Support tagged tunnel over bond net/mlx5e: Avoid detaching non-existing netdev under switchdev mode net/mlx5e: Fix source port matching in fdb peer flow rule net/mlx5e: Replace reciprocal_scale in TX select queue function net/mlx5e: Add ndo_set_feature for uplink representor net/mlx5: Avoid reloading already removed devices net/mlx5: Update pci error handler entries and command translation RAS/CEC: Convert the timer callback to a workqueue RAS/CEC: Fix binary search function x86/mm/KASLR: Compute the size of the vmemmap section properly can: purge socket error queue on sock destruct can: flexcan: Remove unneeded registration message can: af_can: Fix error path of can_init() can: m_can: implement errata "Needless activation of MRAF irq" can: mcp251x: add support for mcp25625 dt-bindings: can: mcp251x: add mcp25625 support can: xilinx_can: use correct bittiming_const for CAN FD core can: flexcan: fix timeout when set small bitrate can: usb: Kconfig: Remove duplicate menu entry lockref: Limit number of cmpxchg loop retries uaccess: add noop untagged_addr definition x86/insn-eval: Fix use-after-free access to LDT entry kbuild: use more portable 'command -v' for cc-cross-prefix s390/unwind: correct stack switching during unwind scsi: hpsa: correct ioaccel2 chaining btrfs: Always trim all unallocated space in btrfs_trim_free_extents netfilter: ipv6: nf_defrag: accept duplicate fragments again powerpc/32s: fix booting with CONFIG_PPC_EARLY_DEBUG_BOOTX drm/meson: fix G12A primary plane disabling drm/meson: fix primary plane disabling drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations block, bfq: add weight symlink to the bfq.weight cgroup parameter cgroup: let a symlink too be created with a cftype file powerpc/64s: __find_linux_pte() synchronization vs pmdp_invalidate() powerpc/64s: Fix THP PMD collapse serialisation powerpc: Fix kexec failure on book3s/32 drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW drm/nouveau/secboot: split out FW version-specific LS function pointers drm/nouveau/secboot: pass max supported FW version to LS load funcs drm/nouveau/core: support versioned firmware loading drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device block: free sched's request pool in blk_cleanup_queue bpf: expand section tests for test_section_names bpf: more msg_name rewrite tests to test_sock_addr bpf, bpftool: enable recvmsg attach types bpf, libbpf: enable recvmsg attach types bpf: sync tooling uapi header bpf: fix unconnected udp hooks vfio/mdev: Synchronize device create/remove with parent removal vfio/mdev: Avoid creating sysfs remove file on stale device removal pktgen: do not sleep with the thread lock held. net: mvpp2: Use strscpy to handle stat strings net: rds: fix memory leak in rds_ib_flush_mr_pool ipv6: fix EFAULT on sendto with icmpv6 and hdrincl ipv6: use READ_ONCE() for inet->hdrincl as in ipv4 soundwire: intel: set dai min and max channels correctly soundwire: stream: fix bad unlock balance x86/fpu: Use fault_in_pages_writeable() for pre-faulting nvme-rdma: use dynamic dma mapping per command nvme: Fix u32 overflow in the number of namespace list calculation vfio/mdev: Improve the create/remove sequence SoC: rt274: Fix internal jack assignment in set_jack callback ALSA: hdac: fix memory release for SST and SOF drivers ASoC: SOF: Intel: hda: use the defined ppcap functions ASoC: core: move DAI pre-links initiation to snd_soc_instantiate_card ASoC: Intel: cht_bsw_rt5672: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_nau8824: fix kernel oops with platform_name override ASoC: Intel: bytcht_es8316: fix kernel oops with platform_name override ASoC: Intel: cht_bsw_max98090: fix kernel oops with platform_name override Revert "gfs2: Replace gl_revokes with a GLF flag" arm64: Silence gcc warnings about arch ABI drift parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe() usb: gadget: dwc2: fix zlp handling usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i] usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init() usb: dwc2: Fix DMA cache alignment issues usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression) ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix drm/komeda: Potential error pointer dereference drm/komeda: remove set but not used variable 'kcrtc' x86/CPU: Add more Icelake model numbers hwmon: (pmbus/core) Treat parameters as paged if on multiple pages hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples hwmon: (core) add thermal sensors only if dev->of_node is present Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied" net: aquantia: fix wol configuration not applied sometimes ethtool: fix potential userspace buffer overflow Fix memory leak in sctp_process_init net: rds: fix memory leak when unload rds_rdma ipv6: fix the check before getting the cookie in rt6_get_cookie ipv4: not do cache for local delivery if bc_forwarding is enabled selftests: vm: Fix test build failure when built by itself tools: bpftool: Fix JSON output when lookup fails mmc: also set max_segment_size in the device mtip32xx: also set max_segment_size in the device rsxx: don't call dma_set_max_seg_size nvme-pci: don't limit DMA segement size s390/qeth: handle error when updating TX queue count s390/qeth: fix VLAN attribute in bridge_hostnotify udev event s390/qeth: check dst entry before use s390/qeth: handle limited IPv4 broadcast in L3 TX path ceph: fix error handling in ceph_get_caps() ceph: avoid iput_final() while holding mutex or in dispatch thread ceph: single workqueue for inode related works cgroup: css_task_iter_skip()'d iterators must be advanced before accessed drm/amd/amdgpu: add RLC firmware to support raven1 refresh drm/amd/powerplay: add set_power_profile_mode for raven1_refresh drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 426 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 424 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 423 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 421 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 419 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 418 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 417 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 416 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 414 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 412 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 411 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 410 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 409 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 408 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 407 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 406 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 405 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 404 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 403 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 402 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 401 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 400 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 399 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 398 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 397 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 396 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 395 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 394 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 393 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 392 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 391 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 390 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 389 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 388 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 387 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 380 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 377 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 376 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 375 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 373 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 371 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 370 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 367 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 365 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 364 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 363 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 362 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 354 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 353 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 352 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 351 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 350 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 349 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 348 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 347 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 346 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 344 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 343 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 342 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 341 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 340 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 339 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 338 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 334 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 332 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 328 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 326 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 325 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 324 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 323 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 322 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 321 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 320 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 316 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 315 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 314 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 313 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 312 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 311 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 310 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 308 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 307 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 305 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 301 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 300 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 299 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 297 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 296 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 294 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 292 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 290 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 289 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 283 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 281 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 280 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 278 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 277 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 276 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 275 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 274 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 273 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 272 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 271 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 270 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 269 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 268 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 266 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 265 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 264 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 263 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 262 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 260 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 258 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 257 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 256 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 254 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 253 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 252 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 251 lib/test_stackinit: Handle Clang auto-initialization pattern block: Drop unlikely before IS_ERR(_OR_NULL) xen/swiotlb: don't initialize swiotlb twice on arm64 s390/mm: fix address space detection in exception handling HID: logitech-dj: Fix 064d:c52f receiver support Revert "HID: core: Call request_module before doing device_add" Revert "HID: core: Do not call request_module() in async context" Revert "HID: Increase maximum report size allowed by hid_field_extract()" tests: fix pidfd-test compilation signal: improve comments samples: fix pidfd-metadata compilation arm64: arch_timer: mark functions as __always_inline arm64: smp: Moved cpu_logical_map[] to smp.h arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding() selftests/bpf: move test_lirc_mode2_user to TEST_GEN_PROGS_EXTENDED USB: Fix chipmunk-like voice when using Logitech C270 for recording audio. USB: usb-storage: Add new ID to ums-realtek udmabuf: actually unmap the scatterlist net: fix indirect calls helpers for ptype list hooks. net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous() scsi: ufs: Check that space was properly alloced in copy_query_response udp: only choose unbound UDP socket for multicast when not in a VRF net/tls: replace the sleeping lock around RX resync with a bit lock Revert "net/tls: avoid NULL-deref on resync during device removal" block: aoe: no need to check return value of debugfs_create functions net: dsa: sja1105: Fix link speed not working at 100 Mbps and below net: phylink: avoid reducing support mask scripts/checkstack.pl: Fix arm64 wrong or unknown architecture kbuild: tar-pkg: enable communication with jobserver kconfig: tests: fix recursive inclusion unit test kbuild: teach kselftest-merge to find nested config files nvmet: fix data_len to 0 for bdev-backed write_zeroes MAINTAINERS: Hand over skd maintainership ASoC: sun4i-i2s: Add offset to RX channel select ASoC: sun4i-i2s: Fix sun8i tx channel offset mask ASoC: max98090: remove 24-bit format support if RJ is 0 ASoC: da7219: Fix build error without CONFIG_I2C ASoC: SOF: Intel: hda: Fix COMPILE_TEST build error drm/arm/hdlcd: Allow a bit of clock tolerance drm/arm/hdlcd: Actually validate CRTC modes drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times drm/komeda: fixing of DMA mapping sg segment warning netfilter: ipv6: nf_defrag: fix leakage of unqueued fragments habanalabs: Read upper bits of trace buffer from RWPHI arm64: arch_k3: Fix kconfig dependency warning drm: don't block fb changes for async plane updates drm/vc4: fix fb references in async update drm/msm: fix fb references in async update drm/amd: fix fb references in async update drm/rockchip: fix fb references in async update xen-blkfront: switch kcalloc to kvcalloc for large array allocation drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable() drm/mediatek: clear num_pipes when unbind driver drm/mediatek: call drm_atomic_helper_shutdown() when unbinding driver drm/mediatek: unbind components in mtk_drm_unbind() drm/mediatek: fix unbind functions net: sfp: read eeprom in maximum 16 byte increments selftests: set sysctl bc_forwarding properly in router_broadcast.sh ANDROID: update gki aarch64 ABI representation net: ethernet: mediatek: Use NET_IP_ALIGN to judge if HW RX_2BYTE_OFFSET is enabled net: ethernet: mediatek: Use hw_feature to judge if HWLRO is supported net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set ANDROID: gki_defconfig: Enable CMA, SLAB_FREELIST (RANDOM and HARDENED) on x86 bpf: udp: Avoid calling reuseport's bpf_prog from udp_gro bpf: udp: ipv6: Avoid running reuseport's bpf_prog from __udp6_lib_err rcu: locking and unlocking need to always be at least barriers ANDROID: gki_defconfig: enable SLAB_FREELIST_RANDOM, SLAB_FREELIST_HARDENED ANDROID: gki_defconfig: enable CMA and increase CMA_AREAS ASoC: SOF: fix DSP oops definitions in FW ABI ASoC: hda: fix unbalanced codec dev refcount for HDA_DEV_ASOC ASoC: SOF: ipc: replace fw ready bitfield with explicit bit ordering ASoC: SOF: bump to ABI 3.6 ASoC: SOF: soundwire: add initial soundwire support ASoC: SOF: uapi: mirror firmware changes ASoC: Intel: Baytrail: add quirk for Aegex 10 (RU2) tablet xfs: inode btree scrubber should calculate im_boffset correctly mmc: sdhci_am654: Fix SLOTTYPE write usb: typec: ucsi: ccg: fix memory leak in do_flash ANDROID: update gki aarch64 ABI representation habanalabs: Fix virtual address access via debugfs for 2MB pages drm/komeda: Constify the usage of komeda_component/pipeline/dev_funcs x86/power: Fix 'nosmt' vs hibernation triple fault during resume mm/vmalloc: Avoid rare case of flushing TLB with weird arguments mm/vmalloc: Fix calculation of direct map addr range PM: sleep: Add kerneldoc comments to some functions drm/i915/gvt: save RING_HEAD into vreg when vgpu switched out sparc: perf: fix updated event period in response to PERF_EVENT_IOC_PERIOD mdesc: fix a missing-check bug in get_vdev_port_node_info() drm/i915/gvt: add F_CMD_ACCESS flag for wa regs sparc64: Fix regression in non-hypervisor TLB flush xcall packet: unconditionally free po->rollover Update my email address net: hns: Fix loopback test failed at copper ports Linux 5.2-rc3 net: dsa: mv88e6xxx: avoid error message on remove from VLAN 0 mm, compaction: make sure we isolate a valid PFN include/linux/generic-radix-tree.h: fix kerneldoc comment kernel/signal.c: trace_signal_deliver when signal_group_exit drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used spdxcheck.py: fix directory structures kasan: initialize tag to 0xff in __kasan_kmalloc z3fold: fix sheduling while atomic scripts/gdb: fix invocation when CONFIG_COMMON_CLK is not set mm/gup: continue VM_FAULT_RETRY processing even for pre-faults ocfs2: fix error path kobject memory leak memcg: make it work on sparse non-0-node systems mm, memcg: consider subtrees in memory.events prctl_set_mm: downgrade mmap_sem to read lock prctl_set_mm: refactor checks from validate_prctl_map kernel/fork.c: make max_threads symbol static arch/arm/boot/compressed/decompress.c: fix build error due to lz4 changes arch/parisc/configs/c8000_defconfig: remove obsoleted CONFIG_DEBUG_SLAB_LEAK mm/vmalloc.c: fix typo in comment lib/sort.c: fix kernel-doc notation warnings mm: fix Documentation/vm/hmm.rst Sphinx warnings treewide: fix typos of SPDX-License-Identifier crypto: ux500 - fix license comment syntax error MAINTAINERS: add I2C DT bindings to ARM platforms MAINTAINERS: add DT bindings to i2c drivers mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies() iwlwifi: mvm: change TLC config cmd sent by rs to be async iwlwifi: Fix double-free problems in iwl_req_fw_callback() iwlwifi: fix AX201 killer sku loading firmware issue iwlwifi: print fseq info upon fw assert iwlwifi: clear persistence bit according to device family iwlwifi: fix load in rfkill flow for unified firmware iwlwifi: mvm: remove d3_sram debugfs file bpf, riscv: clear high 32 bits for ALU32 add/sub/neg/lsh/rsh/arsh libbpf: Return btf_fd for load_sk_storage_btf HID: a4tech: fix horizontal scrolling HID: hyperv: Add a module description line net: dsa: sja1105: Don't store frame type in skb->cb block: print offending values when cloned rq limits are exceeded blk-mq: Document the blk_mq_hw_queue_to_node() arguments blk-mq: Fix spelling in a source code comment block: Fix bsg_setup_queue() kernel-doc header block: Fix rq_qos_wait() kernel-doc header block: Fix blk_mq_*_map_queues() kernel-doc headers block: Fix throtl_pending_timer_fn() kernel-doc header block: Convert blk_invalidate_devt() header into a non-kernel-doc header block/partitions/ldm: Convert a kernel-doc header into a non-kernel-doc header leds: avoid flush_work in atomic context cgroup: Include dying leaders with live threads in PROCS iterations cgroup: Implement css_task_iter_skip() cgroup: Call cgroup_release() before __exit_signal() netfilter: nf_tables: fix module autoload with inet family Revert "lockd: Show pid of lockd for remote locks" ALSA: hda/realtek - Update headset mode for ALC256 fs/adfs: fix filename fixup handling for "/" and "//" names fs/adfs: move append_filetype_suffix() into adfs_object_fixup() fs/adfs: remove truncated filename hashing fs/adfs: factor out filename fixup fs/adfs: factor out object fixups fs/adfs: factor out filename case lowering fs/adfs: factor out filename comparison ovl: doc: add non-standard corner cases pstore/ram: Run without kernel crash dump region MAINTAINERS: add Vasily Gorbik and Christian Borntraeger for s390 MAINTAINERS: Farewell Martin Schwidefsky pstore: Set tfm to NULL on free_buf_for_compression nds32: add new emulations for floating point instruction nds32: Avoid IEX status being incorrectly modified math-emu: Use statement expressions to fix Wshift-count-overflow warning net: correct zerocopy refcnt with udp MSG_MORE ethtool: Check for vlan etype or vlan tci when parsing flow_rule net: don't clear sock->sk early to avoid trouble in strparser net-gro: fix use-after-free read in napi_gro_frags() net: dsa: tag_8021q: Create a stable binary format net: dsa: tag_8021q: Change order of rx_vid setup net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value docs cgroups: add another example size for hugetlb NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter ipv4: tcp_input: fix stack out of bounds when parsing TCP options. mlxsw: spectrum: Prevent force of 56G mlxsw: spectrum_acl: Avoid warning after identical rules insertion SUNRPC: Fix a use after free when a server rejects the RPCSEC_GSS credential net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT SUNRPC fix regression in umount of a secure mount r8169: fix MAC address being lost in PCI D3 treewide: Add SPDX license identifier - Kbuild treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 200 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 199 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 198 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 195 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 194 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 193 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 190 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 188 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 185 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 183 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 182 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 180 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 179 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 176 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 175 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 173 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 172 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 171 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 170 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 166 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 165 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 164 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 162 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 161 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 160 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 158 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 155 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 154 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 153 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 151 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 150 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 148 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 147 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 145 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 144 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 143 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 142 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 140 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 139 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 138 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 137 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 136 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 135 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 133 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 132 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 131 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 130 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 129 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 128 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 127 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 126 net: core: support XDP generic on stacked devices. netvsc: unshare skb in VF rx handler udp: Avoid post-GRO UDP checksum recalculation nvme-tcp: fix queue mapping when queue count is limited nvme-rdma: fix queue mapping when queue count is limited fpga: zynqmp-fpga: Correctly handle error pointer selftests: vm: install test_vmalloc.sh for run_vmtests userfaultfd: selftest: fix compiler warning kselftest/cgroup: fix incorrect test_core skip kselftest/cgroup: fix unexpected testing failure on test_core kselftest/cgroup: fix unexpected testing failure on test_memcontrol xtensa: Fix section mismatch between memblock_reserve and mem_reserve signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO mwifiex: Abort at too short BSS descriptor element mwifiex: Fix possible buffer overflows at parsing bss descriptor drm/i915/gvt: Assign NULL to the pointer after memory free. drm/i915/gvt: Check if cur_pt_type is valid x86: intel_epb: Do not build when CONFIG_PM is unset crypto: hmac - fix memory leak in hmac_init_tfm() crypto: jitterentropy - change back to module_init() ARM: dts: Drop bogus CLKSEL for timer12 on dra7 KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry() KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9 KVM: PPC: Book3S HV: XIVE: Fix page offset when clearing ESB pages KVM: PPC: Book3S HV: XIVE: Take the srcu read lock when accessing memslots KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts KVM: PPC: Book3S HV: XIVE: Introduce a new mutex for the XIVE device drm/i915/gvt: Fix cmd length of VEB_DI_IECP drm/i915/gvt: refine ggtt range validation drm/i915/gvt: Fix vGPU CSFE_CHICKEN1_REG mmio handler drm/i915/gvt: Fix GFX_MODE handling drm/i915/gvt: Update force-to-nonpriv register whitelist drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack ima: show rules with IMA_INMASK correctly evm: check hash algorithm passed to init_desc() scsi: libsas: delete sas port if expander discover failed scsi: libsas: only clear phy->in_shutdown after shutdown event done scsi: scsi_dh_alua: Fix possible null-ptr-deref scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask scsi: zfcp: fix to prevent port_remove with pure auto scan LUNs (only sdevs) scsi: zfcp: fix missing zfcp_port reference put on -EBUSY from port_remove scsi: libcxgbi: add a check for NULL pointer in cxgbi_check_route() net: phy: dp83867: Set up RGMII TX delay net: phy: dp83867: do not call config_init twice net: phy: dp83867: increase SGMII autoneg timer duration net: phy: dp83867: fix speed 10 in sgmii mode net: phy: marvell10g: report if the PHY fails to boot firmware net: phylink: ensure consistent phy interface mode cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css() blk-mq: Fix memory leak in error handling usbip: usbip_host: fix stub_dev lock context imbalance regression net: sh_eth: fix mdio access in sh_eth_close() for R-Car Gen2 and RZ/A1 SoCs MIPS: uprobes: remove set but not used variable 'epc' s390/crypto: fix possible sleep during spinlock aquired MIPS: pistachio: Build uImage.gz by default MIPS: Make virt_addr_valid() return bool MIPS: Bounds check virt_addr_valid CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM RDMA/efa: Remove MAYEXEC flag check from mmap flow mlx5: avoid 64-bit division IB/hfi1: Validate page aligned for a given virtual address IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/rdmavt: Fix alloc_qpn() WARN_ON() ASoC: sun4i-codec: fix first delay on Speaker drm/amdgpu: reserve stollen vram for raven series media: venus: hfi_parser: fix a regression in parser selftests: bpf: fix compiler warning in flow_dissector test arm64: use the correct function type for __arm64_sys_ni_syscall arm64: use the correct function type in SYSCALL_DEFINE0 arm64: fix syscall_fn_t type block: don't protect generic_make_request_checks with blk_queue_enter block: move blk_exit_queue into __blk_release_queue selftests: bpf: complete sub-register zero extension checks selftests: bpf: move sub-register zero extension checks into subreg.c ovl: detect overlapping layers drm/i915/icl: Add WaDisableBankHangMode ALSA: fireface: Use ULL suffixes for 64-bit constants signal/arm64: Use force_sig not force_sig_fault for SIGKILL nl80211: fill all policy .type entries mac80211: free peer keys before vif down in mesh ANDROID: ABI out: Use the extension .xml rather then .out drm/mediatek: respect page offset for PRIME mmap calls drm/mediatek: adjust ddp clock control flow ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops KVM: PPC: Book3S HV: XIVE: Fix the enforced limit on the vCPU identifier KVM: PPC: Book3S HV: XIVE: Do not test the EQ flag validity when resetting KVM: PPC: Book3S HV: XIVE: Clear file mapping when device is released KVM: PPC: Book3S HV: Don't take kvm->lock around kvm_for_each_vcpu KVM: PPC: Book3S: Use new mutex to synchronize access to rtas token list KVM: PPC: Book3S HV: Use new mutex to synchronize MMU setup KVM: PPC: Book3S HV: Avoid touching arch.mmu_ready in XIVE release functions Revert "drivers: thermal: tsens: Add new operation to check if a sensor is enabled" net/mlx5e: Disable rxhash when CQE compress is enabled net/mlx5e: restrict the real_dev of vlan device is the same as uplink device net/mlx5: Allocate root ns memory using kzalloc to match kfree net/mlx5: Avoid double free in fs init error unwinding path net/mlx5: Avoid double free of root ns in the error flow path net/mlx5: Fix error handling in mlx5_load() Documentation: net-sysfs: Remove duplicate PHY device documentation llc: fix skb leak in llc_build_and_send_ui_pkt() selftests: pmtu: Fix encapsulating device in pmtu_vti6_link_change_mtu dfs_cache: fix a wrong use of kfree in flush_cache_ent() fs/cifs/smb2pdu.c: fix buffer free in SMB2_ioctl_free cifs: fix memory leak of pneg_inbuf on -EOPNOTSUPP ioctl case xenbus: Avoid deadlock during suspend due to open transactions xen/pvcalls: Remove set but not used variable tracing: Avoid memory leak in predicate_parse() habanalabs: fix bug in checking huge page optimization mmc: sdhci: Fix SDIO IRQ thread deadlock dpaa_eth: use only online CPU portals net: mvneta: Fix err code path of probe net: stmmac: Do not output error on deferred probe Btrfs: fix race updating log root item during fsync Btrfs: fix wrong ctime and mtime of a directory after log replay ARC: [plat-hsdk] Get rid of inappropriate PHY settings ARC: [plat-hsdk]: Add support of Vivante GPU ARC: [plat-hsdk]: enable creg-gpio controller Btrfs: fix fsync not persisting changed attributes of a directory btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON() Btrfs: incremental send, fix emission of invalid clone operations Btrfs: incremental send, fix file corruption when no-holes feature is enabled btrfs: correct zstd workspace manager lock to use spin_lock_bh() btrfs: Ensure replaced device doesn't have pending chunk allocation ia64: fix build errors by exporting paddr_to_nid() ASoC: SOF: Intel: hda: fix the hda init chip ASoC: SOF: ipc: fix a race, leading to IPC timeouts ASoC: SOF: control: correct the copy size for bytes kcontrol put ASoC: SOF: pcm: remove warning - initialize workqueue on open ASoC: SOF: pcm: clear hw_params_upon_resume flag correctly ASoC: SOF: core: fix error handling with the probe workqueue ASoC: SOF: core: remove snd_soc_unregister_component in case of error ASoC: SOF: core: remove DSP after unregistering machine driver ASoC: soc-core: fixup references at soc_cleanup_card_resources() arm64/module: revert to unsigned interpretation of ABS16/32 relocations KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID kvm: fix compile on s390 part 2 xprtrdma: Use struct_size() in kzalloc() tools headers UAPI: Sync kvm.h headers with the kernel sources perf record: Fix s390 missing module symbol and warning for non-root users perf machine: Read also the end of the kernel perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms perf session: Add missing swap ops for namespace events perf namespace: Protect reading thread's namespace tools headers UAPI: Sync drm/drm.h with the kernel s390/crypto: fix gcm-aes-s390 selftest failures s390/zcrypt: Fix wrong dispatching for control domain CPRBs s390/pci: fix assignment of bus resources s390/pci: fix struct definition for set PCI function s390: mark __cpacf_check_opcode() and cpacf_query_func() as __always_inline s390: add unreachable() to dump_fault_info() to fix -Wmaybe-uninitialized tools headers UAPI: Sync drm/i915_drm.h with the kernel tools headers UAPI: Sync linux/fs.h with the kernel tools headers UAPI: Sync linux/sched.h with the kernel tools arch x86: Sync asm/cpufeatures.h with the with the kernel tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel perf data: Fix 'strncat may truncate' build failure with recent gcc arm64: Fix the arm64_personality() syscall wrapper redirection rtw88: Make some symbols static rtw88: avoid circular locking between local->iflist_mtx and rtwdev->mutex rsi: Properly initialize data in rsi_sdio_ta_reset rtw88: fix unassigned rssi_level in rtw_sta_info rtw88: fix subscript above array bounds compiler warning fuse: extract helper for range writeback fuse: fix copy_file_range() in the writeback case mmc: meson-gx: fix irq ack mmc: tmio: fix SCC error handling to avoid false positive CRC error mmc: tegra: Fix a warning message memstick: mspro_block: Fix an error code in mspro_block_issue_req() mac80211: mesh: fix RCU warning nl80211: fix station_info pertid memory leak mac80211: Do not use stack memory with scatterlist for GMAC ALSA: line6: Assure canceling delayed work at disconnection configfs: Fix use-after-free when accessing sd->s_dentry ALSA: hda - Force polling mode on CNL for fixing codec communication i2c: synquacer: fix synquacer_i2c_doxfer() return value i2c: mlxcpld: Fix wrong initialization order in probe i2c: dev: fix potential memory leak in i2cdev_ioctl_rdwr RDMA/core: Fix panic when port_data isn't initialized RDMA/uverbs: Pass udata on uverbs error unwind RDMA/core: Clear out the udata before error unwind net: aquantia: tcp checksum 0xffff being handled incorrectly net: aquantia: fix LRO with FCS error net: aquantia: check rx csum for all packets in LRO session net: aquantia: tx clean budget logic error vhost: scsi: add weight support vhost: vsock: add weight support vhost_net: fix possible infinite loop vhost: introduce vhost_exceeds_weight() virtio: Fix indentation of VIRTIO_MMIO virtio: add unlikely() to WARN_ON_ONCE() iommu/vt-d: Set the right field for Page Walk Snoop iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock iommu: Add missing new line for dma type drm/etnaviv: lock MMU while dumping core block: Don't revalidate bdev of hidden gendisk loop: Don't change loop device under exclusive opener drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q drm/qxl: drop WARN_ONCE() iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit fuse: add FUSE_WRITE_KILL_PRIV fuse: fallocate: fix return with locked inode PCI: PM: Avoid possible suspend-to-idle issue ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation ACPI/PCI: PM: Add missing wakeup.flags.valid checks ovl: support the FS_IOC_FS[SG]ETXATTR ioctls soundwire: stream: fix out of boundary access on port properties net: tulip: de4x5: Drop redundant MODULE_DEVICE_TABLE() selftests/tls: add test for sleeping even though there is data net/tls: fix no wakeup on partial reads selftests/tls: test for lowat overshoot with multiple records net/tls: fix lowat calculation if some data came from previous record dpaa2-eth: Make constant 64-bit long dpaa2-eth: Use PTR_ERR_OR_ZERO where appropriate dpaa2-eth: Fix potential spectre issue bonding/802.3ad: fix slave link initialization transition states io_uring: Fix __io_uring_register() false success net: ethtool: Document get_rxfh_context and set_rxfh_context ethtool ops net: stmmac: dwmac-mediatek: modify csr_clk value to fix mdio read/write fail net: stmmac: fix csr_clk can't be zero issue net: stmmac: update rx tail pointer register to fix rx dma hang issue. ip_sockglue: Fix missing-check bug in ip_ra_control() ipv6_sockglue: Fix a missing-check bug in ip6_ra_control() efi: Allow the number of EFI configuration tables entries to be zero efi/x86/Add missing error handling to old_memmap 1:1 mapping code parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal bpf: sockmap, fix use after free from sleep in psock backlog workqueue net: sched: don't use tc_action->order during action dump cxgb4: Revert "cxgb4: Remove SGE_HOST_PAGE_SIZE dependency on page size" net: fec: fix the clk mismatch in failed_reset path habanalabs: Avoid using a non-initialized MMU cache mutex habanalabs: fix debugfs code uapi/habanalabs: add opcode for enable/disable device debug mode habanalabs: halt debug engines on user process close selftests: rtc: rtctest: specify timeouts selftests/harness: Allow test to configure timeout selftests/ftrace: Add checkbashisms meta-testcase selftests/ftrace: Make a script checkbashisms clean media: smsusb: better handle optional alignment test_firmware: Use correct snprintf() limit genwqe: Prevent an integer overflow in the ioctl parport: Fix mem leak in parport_register_dev_model fpga: dfl: expand minor range when registering chrdev region fpga: dfl: Add lockdep classes for pdata->lock fpga: dfl: afu: Pass the correct device to dma_mapping_error() fpga: stratix10-soc: fix use-after-free on s10_init() w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback) kheaders: Do not regenerate archive if config is not changed kheaders: Move from proc to sysfs drm/amd/display: Don't load DMCU for Raven 1 (v2) drm/i915: Maintain consistent documentation subsection ordering scripts/sphinx-pre-install: make it handle Sphinx versions docs: Fix conf.py for Sphinx 2.0 vt/fbcon: deinitialize resources in visual_init() after failed memory allocation xfs: fix broken log reservation debugging clocksource/drivers/timer-ti-dm: Change to new style declaration ASoC: core: lock client_mutex while removing link components ASoC: simple-card: Restore original configuration of DAI format {nl,mac}80211: allow 4addr AP operation on crypto controlled devices mac80211_hwsim: mark expected switch fall-through mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he() mac80211: remove set but not used variable 'old' mac80211: handle deauthentication/disassociation from TDLS peer gpio: fix gpio-adp5588 build errors pinctrl: stmfx: Fix compile issue when CONFIG_OF_GPIO is not defined staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000' perf/ring-buffer: Use regular variables for nesting perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data perf/ring_buffer: Add ordering to rb->nest increment perf/ring_buffer: Fix exposing a temporarily decreased data_head x86/CPU/AMD: Don't force the CPB cap when running under a hypervisor x86/boot: Provide KASAN compatible aliases for string routines ALSA: hda/realtek - Enable micmute LED for Huawei laptops Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOAD Input: silead - add MSSL0017 to acpi_device_id cxgb4: offload VLAN flows regardless of VLAN ethtype hsr: fix don't prune the master node from the node_db net: mvpp2: cls: Fix leaked ethtool_rx_flow_rule docs: fix multiple doc build warnings in enumeration.rst lib/list_sort: fix kerneldoc build error docs: fix numaperf.rst and add it to the doc tree doc: Cope with the deprecation of AutoReporter doc: Cope with Sphinx logging deprecations bpf: sockmap, restore sk_write_space when psock gets dropped selftests: bpf: add zero extend checks for ALU32 and/or/xor bpf, riscv: clear target register high 32-bits for and/or/xor on ALU32 spi: abort spi_sync if failed to prepare_transfer_hardware ALSA: hda/realtek - Set default power save node to 0 ipv4/igmp: fix build error if !CONFIG_IP_MULTICAST powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load() MIPS: TXx9: Fix boot crash in free_initmem() MIPS: remove a space after -I to cope with header search paths for VDSO MIPS: mark ginvt() as __always_inline ipv4/igmp: fix another memory leak in igmpv3_del_delrec() bnxt_en: Device serial number is supported only for PFs. bnxt_en: Reduce memory usage when running in kdump kernel. bnxt_en: Fix possible BUG() condition when calling pci_disable_msix(). bnxt_en: Fix aggregation buffer leak under OOM condition. ipv6: Fix redirect with VRF net: stmmac: fix reset gpio free missing mISDN: make sure device name is NUL terminated net: macb: save/restore the remaining registers and features media: dvb: warning about dvb frequency limits produces too much noise net/tls: don't ignore netdev notifications if no TLS features net/tls: fix state removal with feature flags off net/tls: avoid NULL-deref on resync during device removal Documentation: add TLS offload documentation Documentation: tls: RSTify the ktls documentation Documentation: net: move device drivers docs to a submenu mISDN: Fix indenting in dsp_cmx.c ocelot: Dont allocate another multicast list, use __dev_mc_sync Validate required parameters in inet6_validate_link_af xhci: Use %zu for printing size_t type xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() xhci: Fix immediate data transfer if buffer is already DMA mapped usb: xhci: avoid null pointer deref when bos field is NULL usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint() xhci: update bounce buffer with correct sg num media: usb: siano: Fix false-positive "uninitialized variable" warning spi: spi-fsl-spi: call spi_finalize_current_message() at the end ALSA: hda/realtek - Check headset type by unplug and resume powerpc/perf: Fix MMCRA corruption by bhrb_filter powerpc/powernv: Return for invalid IMC domain HID: logitech-hidpp: Add support for the S510 remote control HID: multitouch: handle faulty Elo touch device selftests: netfilter: add flowtable test script netfilter: nft_flow_offload: IPCB is only valid for ipv4 family netfilter: nft_flow_offload: don't offload when sequence numbers need adjustment netfilter: nft_flow_offload: set liberal tracking mode for tcp netfilter: nf_flow_table: ignore DF bit setting ASoC: Intel: sof-rt5682: fix AMP quirk support ASoC: Intel: sof-rt5682: fix for codec button mapping clk: ti: clkctrl: Fix clkdm_clk handling clk: imx: imx8mm: fix int pll clk gate clk: sifive: restrict Kconfig scope for the FU540 PRCI driver RDMA/hns: Fix PD memory leak for internal allocation netfilter: nat: fix udp checksum corruption selftests: netfilter: missing error check when setting up veth interface RDMA/srp: Rename SRP sysfs name after IB device rename trigger ipvs: Fix use-after-free in ip_vs_in ARC: [plat-hsdk]: Add missing FIFO size entry in GMAC node ARC: [plat-hsdk]: Add missing multicast filter bins number to GMAC node samples, bpf: suppress compiler warning samples, bpf: fix to change the buffer size for read() bpf: Check sk_fullsock() before returning from bpf_sk_lookup() bpf: fix out-of-bounds read in __bpf_skc_lookup Documentation/networking: fix af_xdp.rst Sphinx warnings netfilter: nft_fib: Fix existence check support netfilter: nf_queue: fix reinject verdict handling dmaengine: sprd: Add interrupt support for 2-stage transfer dmaengine: sprd: Fix the right place to configure 2-stage transfer dmaengine: sprd: Fix block length overflow dmaengine: sprd: Fix the incorrect start for 2-stage destination channels dmaengine: sprd: Add validation of current descriptor in irq handler dmaengine: sprd: Fix the possible crash when getting descriptor status tty: max310x: Fix external crystal register setup serial: sh-sci: disable DMA for uart_console serial: imx: remove log spamming error message tty: serial: msm_serial: Fix XON/XOFF USB: serial: option: add Telit 0x1260 and 0x1261 compositions USB: serial: pl2303: add Allied Telesis VT-Kit3 USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode dmaengine: tegra210-adma: Fix spelling dmaengine: tegra210-adma: Fix channel FIFO configuration dmaengine: tegra210-adma: Fix crash during probe dmaengine: mediatek-cqdma: sleeping in atomic context dmaengine: dw-axi-dmac: fix null dereference when pointer first is null perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints USB: rio500: update Documentation USB: rio500: simplify locking USB: rio500: fix memory leak in close after disconnect USB: rio500: refuse more than one device at a time usbip: usbip_host: fix BUG: sleeping function called from invalid context USB: sisusbvga: fix oops in error path of sisusb_probe USB: Add LPM quirk for Surface Dock GigE adapter media: usb: siano: Fix general protection fault in smsusb usb: mtu3: fix up undefined reference to usb_debug_root USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor Input: elantech - enable middle button support on 2 ThinkPads dmaengine: fsl-qdma: Add improvement dmaengine: jz4780: Fix transfers being ACKed too soon gcc-plugins: Fix build failures under Darwin host MAINTAINERS: Update Stefan Wahren email address netfilter: nf_tables: fix oops during rule dump ARC: mm: SIGSEGV userspace trying to access kernel virtual memory ARC: fix build warnings ARM: dts: bcm: Add missing device_type = "memory" property soc: bcm: brcmstb: biuctrl: Register writes require a barrier soc: brcmstb: Fix error path for unsupported CPUs ARM: dts: dra71x: Disable usb4_tm target module ARM: dts: dra71x: Disable rtc target module ARM: dts: dra76x: Disable usb4_tm target module ARM: dts: dra76x: Disable rtc target module ASoC: simple-card: Fix configuration of DAI format ASoC: Intel: soc-acpi: Fix machine selection order ASoC: rt5677-spi: Handle over reading when flipping bytes ASoC: soc-dpm: fixup DAI active unbalance pinctrl: intel: Clear interrupt status in mask/unmask callback pinctrl: intel: Use GENMASK() consistently parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup() staging: vc04_services: prevent integer overflow in create_pagelist() Staging: vc04_services: Fix a couple error codes staging: wlan-ng: fix adapter initialization failure staging: kpc2000: double unlock in error handling in kpc_dma_transfer() staging: kpc2000: Fix build error without CONFIG_UIO staging: kpc2000: fix build error on xtensa staging: erofs: set sb->s_root to NULL when failing from __getname() ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready arm64: imx: Fix build error without CONFIG_SOC_BUS ima: fix wrong signed policy requirement when not appraising x86/ima: Check EFI_RUNTIME_SERVICES before using stacktrace: Unbreak stack_trace_save_tsk_reliable() HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact HID: wacom: Don't report anything prior to the tool entering range HID: wacom: Don't set tool type until we're in range ASoC: cs42xx8: Add regcache mask dirty regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer ASoC: fsl_asrc: Fix the issue about unsupported rate spi: bitbang: Fix NULL pointer dereference in spi_unregister_master Input: elan_i2c - increment wakeup count if wake source wireless: Skip directory when generating certificates ASoC: ak4458: rstn_control - return a non-zero on error only ASoC: soc-pcm: BE dai needs prepare when pause release after resume ASoC: ak4458: add return value for ak4458_probe ASoC : cs4265 : readable register too low ASoC: SOF: fix error in verbose ipc command parsing ASoC: SOF: fix race in FW boot timeout handling ASoC: SOF: nocodec: fix undefined reference iio: adc: ti-ads8688: fix timestamp is not updated in buffer iio: dac: ds4422/ds4424 fix chip verification HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5 HID: logitech-hidpp: add support for the MX5500 keyboard HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver HID: i2c-hid: add iBall Aer3 to descriptor override spi: Fix Raspberry Pi breakage ARM: dts: dra76x: Update MMC2_HS200_MANUAL1 iodelay values ARM: dts: am57xx-idk: Remove support for voltage switching for SD card bus: ti-sysc: Handle devices with no control registers ARM: dts: Configure osc clock for d_can on am335x iio: imu: mpu6050: Fix FIFO layout for ICM20602 lkdtm/bugs: Adjust recursion test to avoid elision lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical iio: adc: ads124: avoid buffer overflow iio: adc: modify NPCM ADC read reference voltage Change-Id: I98c823993370027391cc21dfb239c3049f025136 Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>	2019-07-01 17:41:24 -07:00
Alexander Shishkin	26ae4f4406	perf/ring_buffer: Fix AUX software double buffering ... This recent commit: 5768402fd9 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402fd9 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-05-03 12:46:10 +02:00
Alexander Shishkin	339bc41835	perf/ring_buffer: Fix AUX record suppression ... The following commit: 1627314fb5 ("perf: Suppress AUX/OVERWRITE records") has an unintended side-effect of also suppressing all AUX records with no flags and non-zero size, so all the regular records in the full trace mode. This breaks some use cases for people. Fix this by restoring "regular" AUX records. Reported-by: Ben Gainey <Ben.Gainey@arm.com> Tested-by: Ben Gainey <Ben.Gainey@arm.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 1627314fb5 ("perf: Suppress AUX/OVERWRITE records") Link: https://lkml.kernel.org/r/20190329091338.29999-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-04-16 12:13:57 +02:00
Peter Zijlstra	1d54ad9440	perf/core: Fix perf_event_disable_inatomic() race ... Thomas-Mich Richter reported he triggered a WARN()ing from event_function_local() on his s390. The problem boils down to: CPU-A CPU-B perf_event_overflow() perf_event_disable_inatomic() @pending_disable = 1 irq_work_queue(); sched-out event_sched_out() @pending_disable = 0 sched-in perf_event_overflow() perf_event_disable_inatomic() @pending_disable = 1; irq_work_queue(); // FAILS irq_work_run() perf_pending_event() if (@pending_disable) perf_event_disable_local(); // WHOOPS The problem exists in generic, but s390 is particularly sensitive because it doesn't implement arch_irq_work_raise(), nor does it call irq_work_run() from it's PMU interrupt handler (nor would that be sufficient in this case, because s390 also generates perf_event_overflow() from pmu::stop). Add to that the fact that s390 is a virtual architecture and (virtual) CPU-A can stall long enough for the above race to happen, even if it would self-IPI. Adding a irq_work_sync() to event_sched_in() would work for all hardare PMUs that properly use irq_work_run() but fails for software PMUs. Instead encode the CPU number in @pending_disable, such that we can tell which CPU requested the disable. This then allows us to detect the above scenario and even redirect the IPI to make up for the failed queue. Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-04-12 08:55:55 +02:00
Alexander Shishkin	5768402fd9	perf/ring_buffer: Use high order allocations for AUX buffers optimistically ... Currently, the AUX buffer allocator will use high-order allocations for PMUs that don't support hardware scatter-gather chaining to ensure large contiguous blocks of pages, and always use an array of single pages otherwise. There is, however, a tangible performance benefit in using larger chunks of contiguous memory even in the latter case, that comes from not having to fetch the next page's address at every page boundary. In particular, a task running under Intel PT on an Atom CPU shows 1.5%-2% less runtime penalty with a single multi-page output region in snapshot mode (no PMI) than with multiple single-page output regions, from ~6% down to ~4%. For the snapshot mode it does make a difference as it is intended to run over long periods of time. For this reason, change the allocation policy to always optimistically start with the highest possible order when allocating pages for the AUX buffer, desceding until the allocation succeeds or order zero allocation fails. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20190215114727.62648-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-03-09 14:10:30 +01:00
Ingo Molnar	9ed8f1a6e7	Merge branch 'linus' into perf/core, to pick up fixes ... Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-28 08:27:17 +01:00
Ingo Molnar	528871b456	perf/core: Fix impossible ring-buffer sizes warning ... The following commit: 9dff0aa95a ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by: "Jin, Yao" <yao.jin@linux.intel.com> Bisected-by: Borislav Petkov <bp@alien8.de> Analyzed-by: Peter Zijlstra <peterz@infradead.org> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Fixes: 9dff0aa95a ("perf/core: Don't WARN() for impossible ring-buffer sizes") Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-13 08:05:02 +01:00
Mathieu Poirier	840018668c	perf/aux: Make perf_event accessible to setup_aux() ... When pmu::setup_aux() is called the coresight PMU needs to know which sink to use for the session by looking up the information in the event's attr::config2 field. As such simply replace the cpu information by the complete perf_event structure and change all affected customers. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20190131184714.20388-2-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>	2019-02-06 10:00:39 -03:00
Elena Reshetova	ca3bb3d027	perf/ring_buffer: Convert ring_buffer.aux_refcount to refcount_t ... atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable ring_buffer.aux_refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. ** Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. Please check Documentation/core-api/refcount-vs-atomic.rst for more information. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the ring_buffer.aux_refcount it might make a difference in following places: - perf_aux_output_begin(): increment in refcount_inc_not_zero() only guarantees control dependency on success vs. fully ordered atomic counterpart - rb_free_aux(): decrement in refcount_dec_and_test() only provides RELEASE ordering and ACQUIRE ordering + control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: namhyung@kernel.org Link: https://lkml.kernel.org/r/1548678448-24458-4-git-send-email-elena.reshetova@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-04 08:46:17 +01:00
Elena Reshetova	fecb8ed2ce	perf/ring_buffer: Convert ring_buffer.refcount to refcount_t ... atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable ring_buffer.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. ** Important note for maintainers: Some functions from refcount_t API defined in lib/refcount.c have different memory ordering guarantees than their atomic counterparts. Please check Documentation/core-api/refcount-vs-atomic.rst for more information. Normally the differences should not matter since refcount_t provides enough guarantees to satisfy the refcounting use cases, but in some rare cases it might matter. Please double check that you don't have some undocumented memory guarantees for this variable usage. For the ring_buffer.refcount it might make a difference in following places: - ring_buffer_get(): increment in refcount_inc_not_zero() only guarantees control dependency on success vs. fully ordered atomic counterpart - ring_buffer_put(): decrement in refcount_dec_and_test() only provides RELEASE ordering and ACQUIRE ordering + control dependency on success vs. fully ordered atomic counterpart Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: namhyung@kernel.org Link: https://lkml.kernel.org/r/1548678448-24458-3-git-send-email-elena.reshetova@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-04 08:46:16 +01:00
Thomas Gleixner	8e86e01526	perf/core: Convert to SPDX license identifiers ... Use proper SPDX license identifiers instead of the bogus reference to kernel-base/COPYING. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190116111308.012666937@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-04 08:46:11 +01:00
Mark Rutland	9dff0aa95a	perf/core: Don't WARN() for impossible ring-buffer sizes ... The perf tool uses /proc/sys/kernel/perf_event_mlock_kb to determine how large its ringbuffer mmap should be. This can be configured to arbitrary values, which can be larger than the maximum possible allocation from kmalloc. When this is configured to a suitably large value (e.g. thanks to the perf fuzzer), attempting to use perf record triggers a WARN_ON_ONCE() in __alloc_pages_nodemask(): WARNING: CPU: 2 PID: 5666 at mm/page_alloc.c:4511 __alloc_pages_nodemask+0x3f8/0xbc8 Let's avoid this by checking that the requested allocation is possible before calling kzalloc. Reported-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190110142745.25495-1-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2019-02-04 08:45:25 +01:00
Alexander Shishkin	1627314fb5	perf: Suppress AUX/OVERWRITE records ... It has been pointed out to me many times that it is useful to be able to switch off AUX records to save the bandwidth for records that actually matter, for example, in AUX overwrite mode. The usefulness of PERF_RECORD_AUX is in some of its flags, like the TRUNCATED flag that tells the decoder where exactly gaps in the trace are. The OVERWRITE flag, on the other hand will be set on every single record in overwrite mode. However, a PERF_RECORD_AUX[flags=OVERWRITE] is generated on every target task's sched_out, which over time adds up to a lot of useless information. If any folks out there have userspace that depends on a constant stream of OVERWRITE records for a good reason, they'll have to let us know. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Markus T Metzger <markus.t.metzger@intel.com> Link: http://lkml.kernel.org/r/20180404145323.28651-1-alexander.shishkin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>	2018-09-18 17:21:13 -03:00
Linus Torvalds	c81b995f00	Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip ... Pull perf fixes from Thomas Gleixner: "A pile of perf updates: Kernel side: - Remove an incorrect warning in uprobe_init_insn() when insn_get_length() fails. The error return code is handled at the call site. - Move the inline keyword to the right place in the perf ringbuffer code to address a W=1 build warning. Tooling: perf stat: - Fix metric column header display alignment - Improve error messages for default attributes, providing better output for error in command line. - Add --interval-clear option, to provide a 'watch' like printing perf script: - Show hw-cache events too perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry' Core: - Do not blindly assume that 'struct perf_evsel' can be obtained via a straight forward container_of() as there are call sites which hand in a plain 'struct hist' which is not part of a container. - Fix error index in the PMU event parser, so that error messages can point to the problematic token" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Move the inline keyword at the beginning of the function declaration uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn() perf script: Show hw-cache events perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry perf stat: Add event parsing error handling to add_default_attributes perf stat: Allow to specify specific metric column len perf stat: Fix metric column header display alignment perf stat: Use only color_fprintf call in print_metric_only perf stat: Add --interval-clear option perf tools: Fix error index for pmu event parser perf hists: Reimplement hists__has_callchains() perf hists browser gtk: Use hist_entry__has_callchains() perf hists: Make hist_entry__has_callchains() work with 'perf c2c' perf hists: Save the callchain_size in struct hist_entry	2018-06-24 20:29:15 +08:00
Mathieu Malaterre	57d6a7938a	perf/core: Move the inline keyword at the beginning of the function declaration ... When building perf with W=1 the following warning triggers: CC kernel/events/ring_buffer.o kernel/events/ring_buffer.c:105:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static bool __always_inline ^~~~~~ ... Move the inline keyword to the beginning of the function declaration. Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trival@kernel.org Link: http://lkml.kernel.org/r/20180308202856.9378-1-malat@debian.org Signed-off-by: Ingo Molnar <mingo@kernel.org>	2018-06-22 11:07:47 +02:00
Kees Cook	590b5b7d86	treewide: kzalloc_node() -> kcalloc_node() ... The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>	2018-06-12 16:19:22 -07:00
Peter Zijlstra	4411ec1d19	perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[] ... > kernel/events/ring_buffer.c:871 perf_mmap_to_page() warn: potential spectre issue 'rb->aux_pages' Userspace controls @pgoff through the fault address. Sanitize the array index before doing the array dereference. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>	2018-05-05 08:37:27 +02:00
Linus Torvalds	a9a08845e9	vfs: do bulk POLL* -> EPOLL* replacement ... This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2018-02-11 14:34:03 -08:00
Linus Torvalds	c9b012e5f4	Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux ... Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...	2017-11-15 10:56:56 -08:00
Mark Rutland	6aa7de0591	locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() ... Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-10-25 11:01:08 +02:00
Will Deacon	bc1d202023	perf/core: Export AUX buffer helpers to modules ... Perf PMU drivers using AUX buffers cannot be built as modules unless the AUX helpers are exported. This patch exports perf_aux_output_{begin,end,skip} and perf_get_aux to modules. Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com>	2017-10-18 12:53:30 +01:00
Alexander Shishkin	441430eb54	perf/aux: Only update ->aux_wakeup in non-overwrite mode ... The following commit: d9a50b0256 ("perf/aux: Ensure aux_wakeup represents most recent wakeup index") changed the AUX wakeup position calculation to rounddown(), which causes a division-by-zero in AUX overwrite mode (aka "snapshot mode"). The zero denominator results from the fact that perf record doesn't set aux_watermark to anything, in which case the kernel will set it to half the AUX buffer size, but only for non-overwrite mode. In the overwrite mode aux_watermark stays zero. The good news is that, AUX overwrite mode, wakeups don't happen and related bookkeeping is not relevant, so we can simply forego the whole wakeup updates. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/20170906160811.16510-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-09-29 10:06:45 +02:00
Will Deacon	d9a50b0256	perf/aux: Ensure aux_wakeup represents most recent wakeup index ... The aux_watermark member of struct ring_buffer represents the period (in terms of bytes) at which wakeup events should be generated when data is written to the aux buffer in non-snapshot mode. On hardware that cannot generate an interrupt when the aux_head reaches an arbitrary wakeup index (such as ARM SPE), the aux_head sampled from handle->head in perf_aux_output_{skip,end} may in fact be past the wakeup index. This can lead to wakeup slowly falling behind the head. For example, consider the case where hardware can only generate an interrupt on a page-boundary and the aux buffer is initialised as follows: // Buffer size is 2 * PAGE_SIZE rb->aux_head = rb->aux_wakeup = 0 rb->aux_watermark = PAGE_SIZE / 2 following the first perf_aux_output_begin call, the handle is initialised with: handle->head = 0 handle->size = 2 * PAGE_SIZE handle->wakeup = PAGE_SIZE / 2 and the hardware will be programmed to generate an interrupt at PAGE_SIZE. When the interrupt is raised, the hardware head will be at PAGE_SIZE, so calling perf_aux_output_end(handle, PAGE_SIZE) puts the ring buffer into the following state: rb->aux_head = PAGE_SIZE rb->aux_wakeup = PAGE_SIZE / 2 rb->aux_watermark = PAGE_SIZE / 2 and then the next call to perf_aux_output_begin will result in: handle->head = handle->wakeup = PAGE_SIZE for which the semantics are unclear and, for a smaller aux_watermark (e.g. PAGE_SIZE / 4), then the wakeup would in fact be behind head at this point. This patch fixes the problem by rounding down the aux_head (as sampled from the handle) to the nearest aux_watermark boundary when updating rb->aux_wakeup, therefore taking into account any overruns by the hardware. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1502900297-21839-2-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-08-25 11:04:16 +02:00
Will Deacon	2ab346cfb0	perf/aux: Make aux_{head,wakeup} ring_buffer members long ... The aux_head and aux_wakeup members of struct ring_buffer are defined using the local_t type, despite the fact that they are only accessed via the perf_aux_output_*() functions, which cannot race with each other for a given ring buffer. This patch changes the type of the members to long, so we can avoid using the local_*() API where it isn't needed. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1502900297-21839-1-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-08-25 11:04:15 +02:00
Hendrik Brueckner	8a1898db51	perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev) ... If the event for which an AUX area is about to be allocated, does not support setting up an AUX area, rb_alloc_aux() return -ENOTSUPP. This error condition is being returned unfiltered to the user space, and, for example, the perf tools fails with: failed to mmap with 524 (INTERNAL ERROR: strerror_r(524, 0x3fff497a1c8, 512)=22) This error can be easily seen with "perf record -m 128,256 -e cpu-clock". The 524 error code maps to -ENOTSUPP (in rb_alloc_aux()). The -ENOTSUPP error code shall be only used within the kernel. So the correct error code would then be -EOPNOTSUPP. With this commit, the perf tool then reports: failed to mmap with 95 (Operation not supported) which is more clear. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Hou <bjhoupu@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: acme@kernel.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/1497954399-6355-1-git-send-email-brueckner@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-06-21 11:58:30 +02:00
Alexander Shishkin	ae0c2d995d	perf/core: Add a flag for partial AUX records ... The Intel PT driver needs to be able to communicate partial AUX transactions, that is, transactions with gaps in data for reasons other than no room left in the buffer (i.e. truncated transactions). Therefore, this condition does not imply a wakeup for the consumer. To this end, add a new "partial" AUX flag. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-4-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-03-16 09:51:11 +01:00
Will Deacon	f4c0b0aa58	perf/core: Keep AUX flags in the output handle ... In preparation for adding more flags to perf AUX records, introduce a separate API for setting the flags for a session, rather than appending more bool arguments to perf_aux_output_end. This allows to set each flag at the time a corresponding condition is detected, instead of tracking it in each driver's private state. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2017-03-16 09:51:10 +01:00
Alexander Shishkin	b79ccadd6b	perf/core: Fix aux_mmap_count vs aux_refcount order ... The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-09-10 11:15:36 +02:00
Alexander Shishkin	3f56e687a1	perf/core: Disable the event on a truncated AUX record ... When the PMU driver reports a truncated AUX record, it effectively means that there is no more usable room in the event's AUX buffer (even though there may still be some room, so that perf_aux_output_begin() doesn't take action). At this point the consumer still has to be woken up and the event has to be disabled, otherwise the event will just keep spinning between perf_aux_output_begin() and perf_aux_output_end() until its context gets unscheduled. Again, for cpu-wide events this means never, so once in this condition, they will be forever losing data. Fix this by disabling the event and waking up the consumer in case of a truncated AUX record. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1462886313-13660-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-05-12 10:14:55 +02:00
Wang Nan	9ecda41acb	perf/core: Add ::write_backward attribute to perf event ... This patch introduces 'write_backward' bit to perf_event_attr, which controls the direction of a ring buffer. After set, the corresponding ring buffer is written from end to beginning. This feature is design to support reading from overwritable ring buffer. Ring buffer can be created by mapping a perf event fd. Kernel puts event records into ring buffer, user tooling like perf fetch them from address returned by mmap(). To prevent racing between kernel and tooling, they communicate to each other through 'head' and 'tail' pointers. Kernel maintains 'head' pointer, points it to the next free area (tail of the last record). Tooling maintains 'tail' pointer, points it to the tail of last consumed record (record has already been fetched). Kernel determines the available space in a ring buffer using these two pointers to avoid overwrite unfetched records. By mapping without 'PROT_WRITE', an overwritable ring buffer is created. Different from normal ring buffer, tooling is unable to maintain 'tail' pointer because writing is forbidden. Therefore, for this type of ring buffers, kernel overwrite old records unconditionally, works like flight recorder. This feature would be useful if reading from overwritable ring buffer were as easy as reading from normal ring buffer. However, there's an obscure problem. The following figure demonstrates a full overwritable ring buffer. In this figure, the 'head' pointer points to the end of last record, and a long record 'E' is pending. For a normal ring buffer, a 'tail' pointer would have pointed to position (X), so kernel knows there's no more space in the ring buffer. However, for an overwritable ring buffer, kernel ignore the 'tail' pointer. (X) head . | . V +------+-------+----------+------+---+ |A....A|B.....B|C........C|D....D| | +------+-------+----------+------+---+ Record 'A' is overwritten by event 'E': head | V +--+---+-------+----------+------+---+ |.E|..A|B.....B|C........C|D....D|E..| +--+---+-------+----------+------+---+ Now tooling decides to read from this ring buffer. However, none of these two natural positions, 'head' and the start of this ring buffer, are pointing to the head of a record. Even the full ring buffer can be accessed by tooling, it is unable to find a position to start decoding. The first attempt tries to solve this problem AFAIK can be found from [1]. It makes kernel to maintain 'tail' pointer: updates it when ring buffer is half full. However, this approach introduces overhead to fast path. Test result shows a 1% overhead [2]. In addition, this method utilizes no more tham 50% records. Another attempt can be found from [3], which allows putting the size of an event at the end of each record. This approach allows tooling to find records in a backward manner from 'head' pointer by reading size of a record from its tail. However, because of alignment requirement, it needs 8 bytes to record the size of a record, which is a huge waste. Its performance is also not good, because more data need to be written. This approach also introduces some extra branch instructions to fast path. 'write_backward' is a better solution to this problem. Following figure demonstrates the state of the overwritable ring buffer when 'write_backward' is set before overwriting: head | V +---+------+----------+-------+------+ | |D....D|C........C|B.....B|A....A| +---+------+----------+-------+------+ and after overwriting: head | V +---+------+----------+-------+---+--+ |..E|D....D|C........C|B.....B|A..|E.| +---+------+----------+-------+---+--+ In each situation, 'head' points to the beginning of the newest record. From this record, tooling can iterate over the full ring buffer and fetch records one by one. The only limitation that needs to be considered is back-to-back reading. Due to the non-deterministic of user programs, it is impossible to ensure the ring buffer keeps stable during reading. Consider an extreme situation: tooling is scheduled out after reading record 'D', then a burst of events come, eat up the whole ring buffer (one or multiple rounds). When the tooling process comes back, reading after 'D' is incorrect now. To prevent this problem, we need to find a way to ensure the ring buffer is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is suggested because its overhead is lower than ioctl(PERF_EVENT_IOC_ENABLE). By carefully verifying 'header' pointer, reader can avoid pausing the ring-buffer. For example: /* A union of all possible events */ union perf_event event; p = head = perf_mmap__read_head(); while (true) { /* copy header of next event */ fetch(&event.header, p, sizeof(event.header)); /* read 'head' pointer */ head = perf_mmap__read_head(); /* check overwritten: is the header good? */ if (!verify(sizeof(event.header), p, head)) break; /* copy the whole event */ fetch(&event, p, event.header.size); /* read 'head' pointer again */ head = perf_mmap__read_head(); /* is the whole event good? */ if (!verify(event.header.size, p, head)) break; p += event.header.size; } However, the overhead is high because: a) In-place decoding is not safe. Copying-verifying-decoding is required. b) Fetching 'head' pointer requires additional synchronization. (From Alexei Starovoitov: Even when this trick works, pause is needed for more than stability of reading. When we collect the events into overwrite buffer we're waiting for some other trigger (like all cpu utilization spike or just one cpu running and all others are idle) and when it happens the buffer has valuable info from the past. At this point new events are no longer interesting and buffer should be paused, events read and unpaused until next trigger comes.) This patch utilizes event's default overflow_handler introduced previously. perf_event_output_backward() is created as the default overflow handler for backward ring buffers. To avoid extra overhead to fast path, original perf_event_output() becomes __perf_event_output() and marked '__always_inline'. In theory, there's no extra overhead introduced to fast path. Performance testing: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE1 2253846.700 9997.014 PRE2 2257495.540 8516.293 POST 2250896.100 8933.921 Where 'BASE' is pure performance without capturing. 'PRE1' is test result of pure 'v4.5.0' kernel. 'PRE2' is test result before this patch. 'POST' is test result after this patch. See [4] for the detailed experimental setup. Considering the stdvar, this patch doesn't introduce performance overhead to the fast path. [1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html [3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html [4] http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: <acme@kernel.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com [ Fixed the changelog some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-04-23 14:12:39 +02:00
Wang Nan	d1b26c7024	perf/ring_buffer: Prepare writing into the ring-buffer from the end ... Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-31 10:30:49 +02:00
Wang Nan	86e7972f69	perf/ring_buffer: Introduce new ioctl options to pause and resume the ring-buffer ... Add new ioctl() to pause/resume ring-buffer output. In some situations we want to read from the ring-buffer only when we ensure nothing can write to the ring-buffer during reading. Without this patch we have to turn off all events attached to this ring-buffer to achieve this. This patch is a prerequisite to enable overwrite support for the perf ring-buffer support. Following commits will introduce new methods support reading from overwrite ring buffer. Before reading, caller must ensure the ring buffer is frozen, or the reading is unreliable. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-2-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-31 10:30:45 +02:00
Alexander Shishkin	af5bb4ed12	perf/ring_buffer: Document AUX API usage ... In order to ensure safe AUX buffer management, we rely on the assumption that pmu::stop() stops its ongoing AUX transaction and not just the hw. This patch documents this requirement for the perf_aux_output_{begin,end}() APIs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1457098969-21595-4-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-31 10:30:43 +02:00
Alexander Shishkin	95ff4ca26c	perf/core: Free AUX pages in unmap path ... Now that we can ensure that when ring buffer's AUX area is on the way to getting unmapped new transactions won't start, we only need to stop all events that can potentially be writing aux data to our ring buffer. Having done that, we can safely free the AUX pages and corresponding PMU data, as this time it is guaranteed to be the last aux reference holder. This partially reverts: 57ffc5ca67 ("perf: Fix AUX buffer refcounting") ... which was made to defer deallocation that was otherwise possible from an NMI context. Now it is no longer the case; the last call to rb_free_aux() that drops the last AUX reference has to happen in perf_mmap_close() on that AUX area. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/87d1qtz23d.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-31 10:30:42 +02:00
Alexander Shishkin	dcb10a967c	perf/ring_buffer: Refuse to begin AUX transaction after rb->aux_mmap_count drops ... When ring buffer's AUX area is unmapped and rb->aux_mmap_count drops to zero, new AUX transactions into this buffer can still be started, even though the buffer in en route to deallocation. This patch adds a check to perf_aux_output_begin() for rb->aux_mmap_count being zero, in which case there is no point starting new transactions, in other words, the ring buffers that pass a certain point in perf_mmap_close will not have their events sending new data, which clears path for freeing those buffers' pages right there and then, provided that no active transactions are holding the AUX reference. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1457098969-21595-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-31 10:30:41 +02:00
Peter Zijlstra	8184059e93	perf/core: Fix Undefined behaviour in rb_alloc() ... Sasha reported: [ 3494.030114] UBSAN: Undefined behaviour in kernel/events/ring_buffer.c:685:22 [ 3494.030647] shift exponent -1 is negative Andrey spotted that this is because: It happens if nr_pages = 0: rb->page_order = ilog2(nr_pages); Fix it by making both assignments conditional on nr_pages; since otherwise they should both be 0 anyway, and will be because of the kzalloc() used to allocate the structure. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reported-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/20160129141751.GA407@worktop Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-03-21 09:08:18 +01:00
Alexander Shishkin	45c815f06b	perf: Synchronously free aux pages in case of allocation failure ... We are currently using asynchronous deallocation in the error path in AUX mmap code, which is unnecessary and also presents a problem for users that wish to probe for the biggest possible buffer size they can get: they'll get -EINVAL on all subsequent attemts to allocate a smaller buffer before the asynchronous deallocation callback frees up the pages from the previous unsuccessful attempt. Currently, gdb does that for allocating AUX buffers for Intel PT traces. More specifically, overwrite mode of AUX pmus that don't support hardware sg (some implementations of Intel PT, for instance) is limited to only one contiguous high order allocation for its buffer and there is no way of knowing its size without trying. This patch changes error path freeing to be synchronous as there won't be any contenders for the AUX pages at that point. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1453216469-9509-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2016-01-21 18:54:27 +01:00
Peter Zijlstra	90eec103b9	treewide: Remove old email address ... There were still a number of references to my old Red Hat email address in the kernel source. Remove these while keeping the Red Hat copyright notices intact. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-11-23 09:44:58 +01:00
Linus Torvalds	105ff3cbf2	atomic: remove all traces of READ_ONCE_CTRL() and atomic*_read_ctrl() ... This seems to be a mis-reading of how alpha memory ordering works, and is not backed up by the alpha architecture manual. The helper functions don't do anything special on any other architectures, and the arguments that support them being safe on other architectures also argue that they are safe on alpha. Basically, the "control dependency" is between a previous read and a subsequent write that is dependent on the value read. Even if the subsequent write is actually done speculatively, there is no way that such a speculative write could be made visible to other cpu's until it has been committed, which requires validating the speculation. Note that most weakely ordered architectures (very much including alpha) do not guarantee any ordering relationship between two loads that depend on each other on a control dependency: read A if (val == 1) read B because the conditional may be predicted, and the "read B" may be speculatively moved up to before reading the value A. So we require the user to insert a smp_rmb() between the two accesses to be correct: read A; if (A == 1) smp_rmb() read B Alpha is further special in that it can break that ordering even if the *address* of B depends on the read of A, because the cacheline that is read later may be stale unless you have a memory barrier in between the pointer read and the read of the value behind a pointer: read ptr read offset(ptr) whereas all other weakly ordered architectures guarantee that the data dependency (as opposed to just a control dependency) will order the two accesses. As a result, alpha needs a "smp_read_barrier_depends()" in between those two reads for them to be ordered. The coontrol dependency that "READ_ONCE_CTRL()" and "atomic_read_ctrl()" had was a control dependency to a subsequent *write*, however, and nobody can finalize such a subsequent write without having actually done the read. And were you to write such a value to a "stale" cacheline (the way the unordered reads came to be), that would seem to lose the write entirely. So the things that make alpha able to re-order reads even more aggressively than other weak architectures do not seem to be relevant for a subsequent write. Alpha memory ordering may be strange, but there's no real indication that it is *that* strange. Also, the alpha architecture reference manual very explicitly talks about the definition of "Dependence Constraints" in section 5.6.1.7, where a preceding read dominates a subsequent write. Such a dependence constraint admittedly does not impose a BEFORE (alpha architecture term for globally visible ordering), but it does guarantee that there can be no "causal loop". I don't see how you could avoid such a loop if another cpu could see the stored value and then impact the value of the first read. Put another way: the read and the write could not be seen as being out of order wrt other cpus. So I do not see how these "x_ctrl()" functions can currently be necessary. I may have to eat my words at some point, but in the absense of clear proof that alpha actually needs this, or indeed even an explanation of how alpha could _possibly_ need it, I do not believe these functions are called for. And if it turns out that alpha really _does_ need a barrier for this case, that barrier still should not be "smp_read_barrier_depends()". We'd have to make up some new speciality barrier just for alpha, along with the documentation for why it really is necessary. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul E McKenney <paulmck@us.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>	2015-11-03 17:22:17 -08:00
Alexander Shishkin	c2ad6b51ef	perf/ring-buffer: Clarify the use of page::private for high-order AUX allocations ... A question [1] was raised about the use of page::private in AUX buffer allocations, so let's add a clarification about its intended use. The private field and flag are used by perf's rb_alloc_aux() path to tell the pmu driver the size of each high-order allocation, so that the driver can program those appropriately into its hardware. This only matters for PMUs that don't support hardware scatter tables. Otherwise, every page in the buffer is just a page. This patch adds a comment about the private field to the AUX buffer allocation path. [1] http://marc.info/?l=linux-kernel&m=143803696607968 Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1438063204-665-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-08-12 11:43:20 +02:00
Ben Hutchings	ee9397a6fb	perf: Fix double-free of the AUX buffer ... If rb->aux_refcount is decremented to zero before rb->refcount, __rb_free_aux() may be called twice resulting in a double free of rb->aux_pages. Fix this by adding a check to __rb_free_aux(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 57ffc5ca67 ("perf: Fix AUX buffer refcounting") Link: http://lkml.kernel.org/r/1437953468.12842.17.camel@decadent.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-08-12 11:37:21 +02:00
Peter Zijlstra	57ffc5ca67	perf: Fix AUX buffer refcounting ... Its currently possible to drop the last refcount to the aux buffer from NMI context, which results in the expected fireworks. The refcounting needs a bigger overhaul, but to cure the immediate problem, delay the freeing by using an irq_work. Reviewed-and-tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150618103249.GK19282@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-07-06 14:08:30 +02:00
Linus Torvalds	fc934d4017	Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip ... Pull RCU updates from Ingo Molnar: - Continued initialization/Kconfig updates: hide most Kconfig options from unsuspecting users. There's now a single high level configuration option: * * RCU Subsystem * Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW) Which if answered in the negative, leaves us with a single interactive configuration option: Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW) All the rest of the RCU options are configured automatically. Later on we'll remove this single leftover configuration option as well. - Remove all uses of RCU-protected array indexes: replace the rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert() - RCU CPU-hotplug cleanups - Updates to Tiny RCU: a race fix and further code shrinkage. - RCU torture-testing updates: fixes, speedups, cleanups and documentation updates. - Miscellaneous fixes - Documentation updates * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) rcutorture: Allow repetition factors in Kconfig-fragment lists rcutorture: Display "make oldconfig" errors rcutorture: Update TREE_RCU-kconfig.txt rcutorture: Make rcutorture scripts force RCU_EXPERT rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact rcutorture: TASKS_RCU set directly, so don't explicitly set it rcutorture: Test SRCU cleanup code path rcutorture: Replace barriers with smp_store_release() and smp_load_acquire() locktorture: Change longdelay_us to longdelay_ms rcutorture: Allow negative values of nreaders to oversubscribe rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug rcutorture: Exchange TREE03 and TREE04 geometries locktorture: fix deadlock in 'rw_lock_irq' type rcu: Correctly handle non-empty Tiny RCU callback list with none ready rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU rcu: Further shrink Tiny RCU by making empty functions static inlines rcu: Conditionally compile RCU's eqs warnings rcu: Remove prompt for RCU implementation rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF ...	2015-06-22 14:01:01 -07:00
Paul E. McKenney	5af4692a75	smp: Make control dependencies work on Alpha, improve documentation ... The current formulation of control dependencies fails on DEC Alpha, which does not respect dependencies of any kind unless an explicit memory barrier is provided. This means that the current fomulation of control dependencies fails on Alpha. This commit therefore creates a READ_ONCE_CTRL() that has the same overhead on non-Alpha systems, but causes Alpha to produce the needed ordering. This commit also applies READ_ONCE_CTRL() to the one known use of control dependencies. Use of READ_ONCE_CTRL() also has the beneficial effect of adding a bit of self-documentation to control dependencies. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>	2015-05-27 12:58:02 -07:00
Alexander Shishkin	aa319bcd36	perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode ... PMUs that don't support hardware scatter tables require big contiguous chunks of memory and a PMI to switch between them. However, in overwrite using a PMI for this purpose adds extra overhead that the users would like to avoid. Thus, in overwrite mode for such PMUs we can only allow one contiguous chunk for the entire requested buffer. This patch changes the behavior accordingly, so that if the buddy allocator fails to come up with a single high-order chunk for the entire requested buffer, the allocation will fail. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1432308626-18845-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-05-27 09:16:20 +02:00
Alexander Shishkin	1a59413124	perf: Add wakeup watermark control to the AUX area ... When AUX area gets a certain amount of new data, we want to wake up userspace to collect it. This adds a new control to specify how much data will cause a wakeup. This is then passed down to pmu drivers via output handle's "wakeup" field, so that the driver can find the nearest point where it can generate an interrupt. We repurpose __reserved_2 in the event attribute for this, even though it was never checked to be zero before, aux_watermark will only matter for new AUX-aware code, so the old code should still be fine. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-10-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-04-02 17:14:16 +02:00
Alexander Shishkin	2023a0d282	perf: Support overwrite mode for the AUX area ... This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-04-02 17:14:15 +02:00
Alexander Shishkin	fdc2670666	perf: Add API for PMUs to write to the AUX area ... For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-04-02 17:14:13 +02:00
Alexander Shishkin	6a27923039	perf: Add a capability for AUX_NO_SG pmus to do software double buffering ... For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-5-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-04-02 17:14:10 +02:00
Alexander Shishkin	0a4e38e64f	perf: Support high-order allocations for AUX space ... Some pmus (such as BTS or Intel PT without multiple-entry ToPA capability) don't support scatter-gather and will prefer larger contiguous areas for their output regions. This patch adds a new pmu capability to request higher order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-4-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>	2015-04-02 17:14:08 +02:00