Vega20 arbitrates pstate at hive level and not device level. Last peer to
remote buffer unmap could drop P-State while another process is still
remote buffer mapped.
With this fix, P-States still needs to be disabled for now as SMU bug
was discovered on synchronous P2P transfers. This should be fixed in the
next FW update.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the list with supported Arcturus chips, but disable for now until
final list is confirmed.
Ideally we can poll atombios for FRU support, instead of maintaining
this list of chips, but this will enable serial number reading for
supported ASICs for the time-being.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c12b84d6e0.
The original patch causes a RAS event and subsequent kernel hard-hang
when running the KFDMemoryTest.PtraceAccessInvisibleVram on VG20 and
Arcturus
dmesg output at hang time:
[drm] RAS event of type ERREVENT_ATHUB_INTERRUPT detected!
amdgpu 0000:67:00.0: GPU reset begin!
Evicting PASID 0x8000 queues
Started evicting pasid 0x8000
qcm fence wait loop timeout expired
The cp might be in an unrecoverable state due to an unsuccessful queues preemption
Failed to evict process queues
Failed to suspend process 0x8000
Finished evicting pasid 0x8000
Started restoring pasid 0x8000
Finished restoring pasid 0x8000
[drm] UVD VCPU state may lost due to RAS ERREVENT_ATHUB_INTERRUPT
amdgpu: [powerplay] Failed to send message 0x26, response 0x0
amdgpu: [powerplay] Failed to set soft min gfxclk !
amdgpu: [powerplay] Failed to upload DPM Bootup Levels!
amdgpu: [powerplay] Failed to send message 0x7, response 0x0
amdgpu: [powerplay] [DisableAllSMUFeatures] Failed to disable all smu features!
amdgpu: [powerplay] [DisableDpmTasks] Failed to disable all smu features!
amdgpu: [powerplay] [PowerOffAsic] Failed to disable DPM!
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <powerplay> failed -5
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added dedicated function to check if particular fw should be skipped from loading.
Added dedicated function for SMU FW loading via PSP
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The system reboot failed as some IP blocks enter power gate before perform
hw resource destory. Meanwhile use unify interface to set device CGPG to ungate
state can simplify the amdgpu poweroff or reset ungate guard.
Fixes: 487eca11a3 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let format prefixes take care of printing the module name
through pr_fmt and dev_fmt definitions.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu uses lots of pr_* calls for printing error messages.
With this prefix, errors shall be more obvious to the end
use regarding its origin, and may help debugging.
Prefix format:
[xxx.xxxxx] amdgpu: ...
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows IPs to flag whether a specific ring requires
a GPU scheduler or not. E.g., sometimes instances of an
IP are asymmetric and have different capabilities.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefix RAS message printing in GFX IP with PCI device info,
which assists the debug in multiple GPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefix ras related kernel message logging with PCI
device info by replacing DRM_INFO/WARN/ERROR with
dev_info/warn/err. This can clearly tell user about
GPU device information where ras is. And add some
other ras message printing to make it more clear
and friendly as well.
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Uncorrectable error count printing is missed when issuing UMC
UE injection. When going to the error count log function in GPU
recover work thread, there is no chance to get correct error count
value by last error injection and print, because the error status
register is automatically cleared after reading in UMC ecc irq
callback. So add such message printing in UMC ecc irq cb to be
consistent with other RAS error interrupt cases.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under bare metal, there is no more else to take
care of the GPU register access through MMIO.
Under Virtualization, to access GPU register is
implemented through KIQ during run-time due to
world-switch.
Therefore, under SR-IOV user can only access
debugfs to r/w GPU registers when meets all
three conditions below.
- amdgpu_gpu_recovery=0
- TDR happened
- in_gpu_reset=0
v2: merge amdgpu_virt_can_access_debugfs() into
amdgpu_virt_enable_access_debugfs()
v3: drop ret variable in amdgpu_virt_enable_access_debugfs()
and directly return result
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Execution will only reach here if the asserted condition is true.
Hence there is no need for the additional check.
Signed-off-by: Aurabindo Pillai <mail@aurabindo.in>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The system will be hang up during S3 suspend because of SMU is pending
for GC not respose the register CP_HQD_ACTIVE access request.This issue
root cause of accessing the GC register under enter GFX CGGPG and can
be fixed by disable GFX CGPG before perform suspend.
v2: Use disable the GFX CGPG instead of RLC safe mode guard.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is at least 1 VG20 DID that does not have an FRU, and trying to read
that will cause a hang. For now, explicitly support reading the FRU for
Arcturus and for the WKS VG20 DIDs, and skip for everything else.
This re-enables serial number reporting for server cards
v2: Add ASIC check
v3: Don't default to true for pre-VG20
v4: Use DID instead of parsing the VBIOS
v5: Sqaush in overflow warning fix
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[PATCH 2/2]
kfd_pre_reset will free mem_objs allocated by kfd_gtt_sa_allocate
Without this change, sriov tdr code path will never free those
allocated memories and get memory leak.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 5161bba4311f in order to split it into two
different patches, and this will make it easier to understand.
[PATCH 1/2]
porting to gfx10 from
commit 1b0bfcff46 ("drm/amdgpu: Avoid destroy hqd when GPU is on reset")
Originally, MEC is touched
without GPU initialized first.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Incorrect CG sequence will cause gfx timedout,
if we keep switching power profile mode
(enter profile mod such as PEAK will disable CG,
exit profile mode EXIT will enable CG)
when run Vulkan test case(case used for test: vkexample).
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN shared memory needs restore after wake up during S3 test.
v2: Allocate shared memory saved_bo at sw_init and free it in sw_fini.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On ARCTURUS and RENOIR, powerplay is not supported yet.
When plug in or unplug power jack, ACPI event will issue.
Then kernel NULL pointer BUG will be triggered.
Check for NULL pointers before calling.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace dev_warn() with dev_info() and note that they are
optional to avoid confusing users.
The RAS TAs only exist on server boards and the HDCP and DTM
TAs only exist on client boards. They are optional either way.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generate HW IP's sched_list in amdgpu_ring_init() instead of
amdgpu_ctx.c. This makes amdgpu_ctx_init_compute_sched(),
ring.has_high_prio and amdgpu_ctx_init_sched() unnecessary.
This patch also stores sched_list for all HW IPs in one big
array in struct amdgpu_device which makes amdgpu_ctx_init_entity()
much more leaner.
v2:
fix a coding style issue
do not use drm hw_ip const to populate amdgpu_ring_type enum
v3:
remove ctx reference and move sched array and num_sched to a struct
use num_scheds to detect uninitialized scheduler list
v4:
use array_index_nospec for user space controlled variables
fix possible checkpatch.pl warnings
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_pre_reset will free mem_objs allocated by kfd_gtt_sa_allocate
Without this change, sriov tdr code path will never free those allocated
memories and get memory leak.
v2:add a bugfix for kiq ring test fail
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
