Nishanth Menon
91dca0f0fe
ARM: dts: keystone: Update SoC specific compatible flags
...
Update the compatible flags to allow specific SoC identification.
Signed-off-by: Nishanth Menon <nm@ti.com >
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org >
2015-10-06 09:51:09 -07:00
Murali Karicheri
cb4c81706f
ARM: dts: k2e-evm: Add device bindings for netcp driver
...
This patch enables networking on k2e evm by adding device
bindings for netcp, knav and qmss. See device binding
documentation below for details.
Documentation/devicetree/bindings/net/keystone-netcp.txt
Signed-off-by: WingMan Kwok <w-kwok2@ti.com >
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com >
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org >
2015-06-10 15:42:59 -07:00
Grygorii Strashko
efa66b3074
ARM: dts: k2e-evm: add 1g ethernet phys nodes
...
Keystone K2E-EVM has two 1G Marvell 88E1514 Ethernet PHYs
installed, which are compatible with 88E1510.
Hence, add corresponding child nodes for 1G MDIO bus.
For more information see:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com >
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org >
2014-11-04 10:24:49 -08:00
Grygorii Strashko
18131ae615
ARM: dts: keystone-evm: add spi nor flash support
...
k2hk, k2e, k2l EVM board have the same Micron N25Q128A11
SPI NOR Flash installed on SPI0 bus.
The NOR Flash is splitted on two partistions:
partition@0
label = "u-boot-spl";
reg = <0x0 0x80000>;
partition@1
label = "misc";
reg = <0x80000 0xf80000>;
Hence, add SPI NOR Flash nodes to all k2hk, k2e, k2l EVM boards.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com >
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com >
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com >
2014-05-12 11:43:59 -04:00
Ivan Khoronzhuk
8b144ffd7b
ARM: dts: k2e-evm: add AEMIF/NAND device entry
...
Add AEMIF/NAND device entry.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com >
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com >
2014-05-08 17:23:40 -04:00
Grygorii Strashko
e42d8a7f96
ARM: dts: keystone: move i2c0 device node from SoC to board files
...
I2C devices are not the part of Keystone SoC and have to be
defined in board DTS files.
Hence, move i2c0 EEPROM device node from Keystone SoC to
k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs
installed.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com >
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com >
2014-05-08 15:24:51 -04:00
Ivan Khoronzhuk
3babe30608
ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
...
As suggested by Olof Johansson at
http://www.spinics.net/lists/arm-kernel/msg314009.html .
It be better just keeping a "ti,keystone" top-level compatible and
just using that to probe. If so we don't have to touch the file
for new boards in the future.
So use common "ti,keystone" compatible in keystone.c for all boards.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com >
Cc: Olof Johansson <olof@lixom.net >
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com >
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com >
2014-03-20 17:00:27 -04:00
Murali Karicheri
209636b678
ARM: dts: keystone: add support for k2 Edison SoC and EVM
...
Keystone2 Edison (K2E) is a Quad Cortex A15 based SoC with
1 DSP. It has standard peripherals such as i2c, spi, uart, timer,
pcie, etc similar to k2hk, but without wireless hardwares. This
patch add support for k2 Edison SoC and EVM. This re-uses the common
keystone.dtsi to include common bindings across the various k2
devices.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com >
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com >
2014-02-26 10:06:56 -05:00
