Samuel Ortiz says:
====================
NFC 4.5 pull request
This is the first NFC pull request for 4.5 and it brings:
- A new driver for the STMicroelectronics ST95HF NFC chipset.
The ST95HF is an NFC digital transceiver with an embedded analog
front-end and as such relies on the Linux NFC digital
implementation. This is the 3rd user of the NFC digital stack.
- ACPI support for the ST st-nci and st21nfca drivers.
- A small improvement for the nfcsim driver, as we can now tune
the Rx delay through sysfs.
- A bunch of minor cleanups and small fixes from Christophe Ricard,
for a few drivers and the NFC core code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ConfigFS lacked binary attributes up until now. This patch
introduces support for binary attributes in a somewhat similar
manner of sysfs binary attributes albeit with changes that
fit the configfs usage model.
Problems that configfs binary attributes fix are everything that
requires a binary blob as part of the configuration of a resource,
such as bitstream loading for FPGAs, DTBs for dynamically created
devices etc.
Look at Documentation/filesystems/configfs/configfs.txt for internals
and howto use them.
This patch is against linux-next as of today that contains
Christoph's configfs rework.
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
[hch: folded a fix from Geert Uytterhoeven <geert+renesas@glider.be>]
[hch: a few tiny updates based on review feedback]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix indentation of vga_switcheroo sections in gpu.tmpl.
Change section type of API documentation from "chapter" to "sect1"
so that the individual functions no longer clutter up the ToC.
Group together under a new "API" chapter.
Fix wording "heretoforth" -> "henceforth".
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Broadcoms DSL, CM (cable modem)and STB I2C core implementation have
8 data in/out registers that can transfer 8 bytes or 32 bytes max.
Cable and DSL "Peripheral" i2c cores use single byte per data
register and the STB can use 4 byte per data register transfer.
Adding support to take care of this difference. Accordingly added
the compatible string for SoCs using the "Peripheral" I2C block.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.
This new compatible string, "brcm,bcm7425-ahci", may be used for most
MIPS-based platforms of 40nm process technology.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull networking fixes from David Miller:
1) Prevent XFRM per-cpu counter updates for one namespace from being
applied to another namespace. Fix from DanS treetman.
2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes
Berg.
3) Remove ethernet header assumption in nft_do_chain_netdev(), from
Pablo Neira Ayuso.
4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal
Speck.
5) Fix use after free in sixpack_close and mkiss_close.
6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz.
7) natsemi doesn't check for DMA mapping errors, from Alexey
Khoroshilov.
8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin.
9) Missing initialization of needed_headroom in geneve tunnel driver,
from Paolo Abeni.
10) Fix conntrack template leak in openvswitch, from Joe Stringer.
11) Mission initialization of wq->flags in sock_alloc_inode(), from
Nicolai Stange.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close
net, socket, socket_wq: fix missing initialization of flags
drivers: net: cpsw: fix error return code
openvswitch: Fix template leak in error cases.
sctp: label accepted/peeled off sockets
sctp: use GFP_USER for user-controlled kmalloc
qlcnic: fix a loop exit condition better
net: cdc_ncm: avoid changing RX/TX buffers on MTU changes
geneve: initialize needed_headroom
ipv6: honor ifindex in case we receive ll addresses in router advertisements
addrconf: always initialize sysctl table data
ipv6/addrlabel: fix ip6addrlbl_get()
switchdev: bridge: Pass ageing time as clock_t instead of jiffies
sh_eth: fix 16-bit descriptor field access endianness too
veth: don’t modify ip_summed; doing so treats packets with bad checksums as good.
net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card
net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card
natsemi: add checks for dma mapping errors
rhashtable: Kill harmless RCU warning in rhashtable_walk_init
openvswitch: correct encoding of set tunnel action attributes
...
Merge "BCM2835 SOC changes for 4.5" from Eric Anholt:
This pull request includes the bcm2835 changes for 4.5 targeting the
arm-soc next/soc branch.
* tag 'bcm2835-soc-next-2015-12-28' of http://github.com/anholt/linux:
ARM: bcm2835: Add Kconfig support for bcm2836
ARM: bcm2835: Add a compat string for bcm2836 machine probe
dt-bindings: Add root properties for Raspberry Pi 2
Conflicts:
arch/arm/mach-bcm/Kconfig
Merge "Samsung DeviceTree updates and improvements for 4.5" from Krzysztof Kozlowski:
1. eMMC/SDIO minor fixes usage of bindings on Snow and Peach
Chromebooks.
2. Remove FIMD from Odroid XU3-family because on XU3 it cannot be used
yet and on XU3-Lite and XU4 it is not supported.
3. Remove deprecated since June 2013 samsung,exynos5-hdmi.
4. Add support for Pseudo Random Generator on Exynos4 (Trats2 for now).
This depends on new SSS clock.
5. Add rotator nodes for Exynos4 and Exynos5.
6. Switch DWC3_1 on Odroid XU3 and XU3-Lite to peripheral mode because
now it cannot be used as OTG.
7. Cleanup the G2D usage on Exynos4 and add it to a proper domain
in case of Exynos4210.
8. Put MDMA1 in proper domain on Exynos4210 as well.
9. Minor cleanups.
* tag 'samsung-dt-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (21 commits)
ARM: dts: Unify G2D device node with other devices on exynos4
ARM: dts: Add power domain to G2D device on exynos4210
ARM: dts: MDMA1 device belongs to LCD0 power domain on exynos4210
ARM: dts: Remove unneeded GPIO include in exynos4412-odroidu3
ARM: dts: exynos4210-universal_c210: Disable DMA for UARTs
ARM: dts: Use peripheral mode for dwc3_1 on exynos5422-odroidxu3
ARM: dts: Add rotator node on exynos5420
ARM: dts: Add rotator node on exynos5250
ARM: dts: Fix power domain for sysmmu-rotator device on exynos4
ARM: dts: Add rotator nodes on exynos4
ARM: dts: Enable PRNG module on exynos4412-trats2
ARM: dts: Add PRNG module for exynos4
dt-bindings: remove deprecated compatible string from exynos-hdmi
ARM: dts: Remove fimd node from exynos5422-odroidxu3-common
ARM: dts: Mark eMMC as non-removable in exynos5250-snow-common
ARM: dts: Remove broken-cd from eMMC node in exynos5420-peach-pi
ARM: dts: Remove broken-cd from eMMC node in exynos5800-peach-pi
ARM: dts: Mark SDIO as non-removable in exynos5250-snow-common
ARM: dts: Mark SDIO as non-removable in exynos5420-peach-pit
ARM: dts: Mark SDIO as non-removable in exynos5800-peach-pi
...
Pull "BCM2835 drivers changes for 4.5" from Eric Anholt:
This pull request includes the bcm2835 changes for 4.5 targeting the
arm-soc next/drivers branch.
* tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux:
ARM: bcm2835: add rpi power domain driver
dt-bindings: add rpi power domain driver bindings
ARM: bcm2835: Define two new packets from the latest firmware.
All variables required by the watchdog core to manage a watchdog are
currently stored in struct watchdog_device. The lifetime of those
variables is determined by the watchdog driver. However, the lifetime
of variables used by the watchdog core differs from the lifetime of
struct watchdog_device. To remedy this situation, watchdog drivers
can implement ref and unref callbacks, to be used by the watchdog
core to lock struct watchdog_device in memory.
While this solves the immediate problem, it depends on watchdog drivers
to actually implement the ref/unref callbacks. This is error prone,
often not implemented in the first place, or not implemented correctly.
To solve the problem without requiring driver support, split the variables
in struct watchdog_device into two data structures - one for variables
associated with the watchdog driver, one for variables associated with
the watchdog core. With this approach, the watchdog core can keep track
of its variable lifetime and no longer depends on ref/unref callbacks
in the driver. As a side effect, some of the variables originally in
struct watchdog_driver are now private to the watchdog core and no longer
visible in watchdog drivers.
As a side effect of the changes made, an ioctl will now always fail
with -ENODEV after a watchdog device was unregistered with the character
device still open. Previously, it would only fail with -ENODEV in some
situations. Also, ioctl operations are now atomic from driver perspective.
With this change, it is now guaranteed that the driver will not unregister
a watchdog between a timeout change and the subsequent ping.
The 'ref' and 'unref' callbacks in struct watchdog_driver are no longer
used and marked as deprecated.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This patch includes ST95HF binding doc that guides how to
make node entry of ST95HF in DT file of any platform.
Signed-off-by: Shikha Singh <shikha.singh@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Pull irqchip core changes for v4.5 from Jason Cooper:
- renesas-intc-irqpin: Remove platform code, improve clock handling
- sunxi-nmi: Extend NMI support to include A80
This adds a binding for the watchdog in Sigma Designs SMP8642 and
similar devices.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This watchdog is instantiated in a FPGA that is memory mapped. It is
made of only one register, called the feed register. Writing to this
register will re-arm the watchdog for a given time (and enable it if it
was disable). It can be disabled by writing a special value into it.
It is part of a syscon block, and the watchdog register offset in this
block varies from board to board. This offset is passed in the syscon
property after the phandle to the syscon node.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This patch adds following attributes to watchdog device's sysfs interface
to read its different status.
* state - reads whether device is active or not
* identity - reads Watchdog device's identity string.
* timeout - reads current timeout.
* timeleft - reads timeleft before watchdog generates a reset
* bootstatus - reads status of the watchdog device at boot
* status - reads watchdog device's internal status bits
* nowayout - reads whether nowayout feature was set or not
Testing with iTCO_wdt:
# cd /sys/class/watchdog/watchdog1/
# ls
bootstatus dev device identity nowayout power state
subsystem timeleft timeout uevent
# cat identity
iTCO_wdt
# cat timeout
30
# cat state
inactive
# echo > /dev/watchdog1
# cat timeleft
26
# cat state
active
# cat bootstatus
0
# cat nowayout
0
Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Jonathan writes:
Third set of new stuff for IIO in the 4.5 cycle.
New driver features
- us5182
* Add interrupt support and rising / falling threshold events.
Cleanups / fixes to new stuff / minor additions
* Expose the IIO value formatting function for drivers to
make use of internally.
- ina2xx
* Fix wrong channel order
* Fix incorrect reporting of endianness
* Adding documentation of ABI unique to this device
- mma8452
* Drop an unused register description
* Use an enum for the channel index to aid readability
- sca3000
* Use standard NULL comparison style
- us5182
* fix an inconsistency in status of enable (a bug with no real effect until
above patches are applied)
* refactor the read_raw function to improve maintainability / readability.
Jonathan writes:
Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.
The big one here is the configfs support which has been a long time in the
works but should allow for cleaner ways to do instantiation of those elements
of IIO that aren't directly connected to specific hardware. Lots of cool new
stuff we can use this for in the works!
New core stuff (basically all configfs support related)
* Configfs support
- Core support (was waiting for a configfs patch that went in around 4.4rc2)
- A little fixlet to add a configfs.h to contain a reference to the
configfs_subsystem structure.
* Some infrastructure to simplify handling of software based triggers
(i.e. ones with no actual hardware associated with them)
* A high resolution timer based trigger. This has been around for years
but until the configfs support was ready we didn't have a sensible way
of instantiating instances of it (the method used for the sysfs_trigger
has never been really satisfactory)
New Device Support
* AMS iAQ Volatile Organic Compounds sensor support.
* Freescale imx7d ADC driver
* Maxim MAX30100 oximeter driver (note that for these devices most of the
smart stuff will be in userspace - effectively they are just light sensors
with some interesting led synchronization as far as the kernel is concerned).
* Microchip mcp3421 support added to the mcp3422 driver.
* TI adc124s021 support added to the adc128s052 driver.
* TI ina219, inda226 power monitors. Note that there is an existing hwmon driver
for these parts, the usecase is somewhat different so it is unclear at this
point if the hwmon driver will eventually be replaced by a bridge from
this driver. In the meantime the Kconfig dependencies should prevent both
from being built.
New driver functionality
* us8152d power management support.
Cleanups, fixups
* Use list_for_each_entry_safe instead of list_for_each_safe with the entry
bit coded longhand.
* Select IRQ_WORK for IIO_DUMMY_EVGEN. This is a fix that somehow got lost
when the driver was moved so lets do it again.
* st-accel - drop an unused define.
* vz89x, lidar - optimize i2c transactions by using a single i2c tranfers
instead of multiple calls where supported (fall back to smbus calls as
before if not).
* Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency
drivers instead of direct access to the structure element.
Kishon writes:
phy: for 4.5
*) new PHY driver for hi6220 usb and rcar gen3 usb2
*) deprecate phy-omap-control driver. phy-omap-control driver was added
when there was no proper infrastructure for doing control module
initialization. The phy-omap-control driver is not an 'actual' PHY
driver and it was just a hack to do PHY related control module
initialization. Now with SYSCON framework in the kernel, control
module setttings can be done using APIs provided by syscon.
*) usbphy-internal pll creates the needed 480MHz and is also a
supply-clock back to the core clock-controller in Rockchip SoCs.
This is now modeled as a real clock.
*) calibrate mt65xx usb3 PHY for better eye diagram and receiver
sensitivity.
*) Miscellaneous cleanups.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Peter writes:
The chipidea changes for v4.5-rc1
- Delete static debug for chipidea driver.
- Suspend USB core when A device tries to switch to peripheral mode,
at former design, it just stopped SoF simply but USB core doesn't know it.
- Several small changes.
Chanwoo writes:
Update extcon for 4.5
Detailed description for patchset:
1. Add new MAX3355 extcon driver
- Maxim Integrated MAX3355E chip integrates a charge pump
and comparator to enable a system with an integrated
USB OTG dual-role transceiver to function as an USB OTG
dual-role device.
2. Update the extcon-arizona driver for jack detection
- Add the device binding for the jack detection and add
the documentation of extcon-arizona.c.
3. Fix the minor issue of extcon driver
- Add IRQF_ONESHOT to interrupt flags of extcon-rt8973.
- Fix the return value regmap_irq_get_virq() of
extcon-max(14577|77693|77843).c driver by using script[1].
[1] http://permalink.gmane.org/gmane.linux.kernel/2046107
Felipe writes:
usb: patches for v4.5
A ton of improvements to dwc2 have been made. The
driver should be a lot more stable on v4.5 then ever
before.
Our good old dwc3 got a few cleanups and misc fixes
and also added support to Xilinx's integration of
this IP.
Yoshihiro Shimoda gives us support for a new USB3
peripheral controller from Renesas.
Other than these, the usual misc fixes all over the
place.
The brd driver has never supported the ramdisk_blocksize kernel
parameter that was in the rd driver it replaced, so remove
mention of this parameter from comments and Documentation.
Commit 9db5579be4 ("rewrite rd") replaced rd with brd, keeping
a brd_blocksize variable in struct brd_device but never using it.
Commit a2cba2913c ("brd: get rid of unused members from struct
brd_device") removed the unused variable.
Commit f5abc8e758 ("Documentation/blockdev/ramdisk.txt: updates")
removed mentions of ramdisk_blocksize from that file.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
NXP LPC32xx USB controller has a subdevice, which controls USB AHB
slave, USB OTG, USB OHCI, USB device and I2C controller to USB phy
clocks, this change adds description of the clock controller, for more
details reference LPC32xx User's Manual, namely USB control, OTG clock
control and OTG clock status registers.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
NXP LPC32xx SoC has a clocking and power control unit (CPC) as a part
of system control block (SCB). CPC is supplied by two external
oscillators and it manages core and most of peripheral
clocks, the change adds description of DT bindings for clock
controller found on LPC32xx SoC series.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
The script "checkpatch.pl" pointed out that assignments should usually
not be performed within condition checks.
Thus move the assignment for the variable "nl_sd" to a separate statement.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Versions in HOWTO was updated to 4.x by commit
e4144fe5d4 ("docs: update HOWTO for 3.x ->
4.x versioning") but not applied to Korean translation. This commit
apply the change.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Outdated link to linux-next wiki was removed by commit
ace80793d1 ("Documentation: remove
outdated references to the linux-next wiki"). However, the change was
not applied to translations. This commit apply the change to
translations.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This merges '5b726e06d6e8309e5c9ef4109a32caf27c71dfc8' into drm-next
Just to resolve some merges to make Daniel's life easier.
Signed-off-by: DAve Airlie <airlied@redhat.com>
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
