Merge tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
  - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030
  - Export symbols for use in modules in max14577
  - Plenty of static code analysis/Coccinelle fixes throughout the SS
  - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808
  - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona
  - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr
  - IRQ fixups in arizona, stmpe, max14577
  - Regulator related changes in axp20x
  - Pass DMA coherency information from parent => child in MFD core
  - Rename DT document files for consistency
  - Add ACPI support to the MFD core
  - Add Andreas Werner to MAINTAINERS for MEN F21BMC

 New drivers/supported devices:
  - New driver for MEN 14F021P00 Board Management Controller
  - New driver for Ricoh RN5T618 PMIC
  - New driver for Rockchip RK808
  - New driver for HiSilicon Hi6421 PMIC
  - New driver for Qualcomm SPMI PMICs
  - Add support for Intel Braswell in lpc_ich
  - Add support for Intel 9 Series PCH in lpc_ich
  - Add support for Intel Quark ILB in lpc_sch"

[ Delayed to after the poweer/reset pull due to Kconfig problems with
  recursive Kconfig select/depends-on chains.   - Linus ]

* tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  i2c: i2c-cros-ec-tunnel: Set retries to 3
  mfd: cros_ec: move locking into cros_ec_cmd_xfer
  mfd: cros_ec: stop calling ->cmd_xfer() directly
  mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC
  mfd: arizona: Correct mask to allow setting micbias external cap
  mfd: Add ACPI support
  Revert "mfd: wm5102: Manually apply register patch"
  mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS
  mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention
  mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention
  mfd: Inherit coherent_dma_mask from parent device
  mfd: Document DT bindings for Qualcomm SPMI PMICs
  mfd: Add support for Qualcomm SPMI PMICs
  mfd: dt-bindings: pm8xxx: Add new compatible string
  mfd: axp209x: Drop the parent supplies field
  mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off
  mfd: dt-bindings: twl4030-power: Use the standard property to mark power control
  mfd: syscon: Add Atmel GPBR DT bindings documention
  ...

drivers/mfd/htc-i2cpld.c

@@ -227,15 +227,12 @@ static irqreturn_t htcpld_handler(int irq, void *dev)
 static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
 {
 	struct i2c_client *client;
-	struct htcpld_chip *chip_data;
+	struct htcpld_chip *chip_data =
+		container_of(chip, struct htcpld_chip, chip_out);
 	unsigned long flags;
 
-	chip_data = container_of(chip, struct htcpld_chip, chip_out);
-	if (!chip_data)
-		return;
-
 	client = chip_data->client;
-	if (client == NULL)
+	if (!client)
 		return;
 
 	spin_lock_irqsave(&chip_data->lock, flags);
@@ -261,31 +258,18 @@ static void htcpld_chip_set_ni(struct work_struct *work)
 static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct htcpld_chip *chip_data;
-	int val = 0;
-	int is_input = 0;
+	u8 cache;
 
-	/* Try out first */
-	chip_data = container_of(chip, struct htcpld_chip, chip_out);
-	if (!chip_data) {
-		/* Try in */
-		is_input = 1;
+	if (!strncmp(chip->label, "htcpld-out", 10)) {
+		chip_data = container_of(chip, struct htcpld_chip, chip_out);
+		cache = chip_data->cache_out;
+	} else if (!strncmp(chip->label, "htcpld-in", 9)) {
 		chip_data = container_of(chip, struct htcpld_chip, chip_in);
-		if (!chip_data)
-			return -EINVAL;
-	}
+		cache = chip_data->cache_in;
+	} else
+		return -EINVAL;
 
-	/* Determine if this is an input or output GPIO */
-	if (!is_input)
-		/* Use the output cache */
-		val = (chip_data->cache_out >> offset) & 1;
-	else
-		/* Use the input cache */
-		val = (chip_data->cache_in >> offset) & 1;
-
-	if (val)
-		return 1;
-	else
-		return 0;
+	return (cache >> offset) & 1;
 }
 
 static int htcpld_direction_output(struct gpio_chip *chip,
@@ -376,7 +360,7 @@ static int htcpld_register_chip_i2c(
 	plat_chip_data = &pdata->chip[chip_index];
 
 	adapter = i2c_get_adapter(pdata->i2c_adapter_id);
-	if (adapter == NULL) {
+	if (!adapter) {
 		/* Eek, no such I2C adapter!  Bail out. */
 		dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
 			 plat_chip_data->addr, pdata->i2c_adapter_id);