tty: Remove unnecessary semicolons

These aren't necessary after switch and while blocks.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/bfin_uart.c

@@ -680,7 +680,7 @@ static int bfin_serial_startup(struct uart_port *port)
 		default:
 			uart_dma_ch_rx = uart_dma_ch_tx = 0;
 			break;
-		};
+		}
 
 		if (uart_dma_ch_rx &&
 			request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
@@ -765,7 +765,7 @@ static void bfin_serial_shutdown(struct uart_port *port)
 		break;
 	default:
 		break;
-	};
+	}
 #endif
 	free_irq(uart->rx_irq, uart);
 	free_irq(uart->tx_irq, uart);

drivers/tty/serial/ip22zilog.c

@@ -832,7 +832,7 @@ ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
 		up->curregs[5] |= Tx8;
 		up->parity_mask = 0xff;
 		break;
-	};
+	}
 	up->curregs[4] &= ~0x0c;
 	if (cflag & CSTOPB)
 		up->curregs[4] |= SB2;

drivers/tty/serial/max310x.c

@@ -690,7 +690,7 @@ static void max310x_handle_tx(struct uart_port *port)
 			max310x_port_write(port, MAX310X_THR_REG,
 					   xmit->buf[xmit->tail]);
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		};
+		}
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

drivers/tty/serial/pmac_zilog.c

@@ -1072,7 +1072,7 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
 		uap->curregs[5] |= Tx8;
 		uap->parity_mask = 0xff;
 		break;
-	};
+	}
 	uap->curregs[4] &= ~(SB_MASK);
 	if (cflag & CSTOPB)
 		uap->curregs[4] |= SB2;

drivers/tty/serial/sunsab.c

@@ -894,7 +894,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	case B115200: baud = 115200; break;
 	case B230400: baud = 230400; break;
 	case B460800: baud = 460800; break;
-	};
+	}
 
 	/*
 	 * Temporary fix.

drivers/tty/serial/sunsu.c

@@ -522,7 +522,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
 				serio_interrupt(&up->serio, ch, 0);
 #endif
 				break;
-			};
+			}
 		}
 	} while (serial_in(up, UART_LSR) & UART_LSR_DR);
 }

drivers/tty/serial/sunzilog.c

@@ -319,7 +319,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
 				serio_interrupt(&up->serio, ch, 0);
 #endif
 			break;
-		};
+		}
 	}
 }
 
@@ -897,7 +897,7 @@ sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
 		up->curregs[R5] |= Tx8;
 		up->parity_mask = 0xff;
 		break;
-	};
+	}
 	up->curregs[R4] &= ~0x0c;
 	if (cflag & CSTOPB)
 		up->curregs[R4] |= SB2;
@@ -1239,7 +1239,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
 	default: case B9600: baud = 9600; break;
 	case B19200: baud = 19200; break;
 	case B38400: baud = 38400; break;
-	};
+	}
 
 	brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
 

drivers/tty/serial/ucc_uart.c

@@ -269,7 +269,7 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
 			return 1;
 
 		bdp++;
-	};
+	}
 }
 
 /*