drm/radeon: consolidate UVD clock programming

Instead of duplicating the code over and over again, just use a single
function to handle the clock calculations.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit is contained in:
Christian König
2013-04-29 11:55:02 +02:00
committed by Alex Deucher
parent 092fbc4ca2
commit facd112d13
6 changed files with 190 additions and 277 deletions

View File

@@ -692,3 +692,140 @@ void radeon_uvd_note_usage(struct radeon_device *rdev)
if (set_clocks)
radeon_set_uvd_clocks(rdev, 53300, 40000);
}
static unsigned radeon_uvd_calc_upll_post_div(unsigned vco_freq,
unsigned target_freq,
unsigned pd_min,
unsigned pd_even)
{
unsigned post_div = vco_freq / target_freq;
/* adjust to post divider minimum value */
if (post_div < pd_min)
post_div = pd_min;
/* we alway need a frequency less than or equal the target */
if ((vco_freq / post_div) > target_freq)
post_div += 1;
/* post dividers above a certain value must be even */
if (post_div > pd_even && post_div % 2)
post_div += 1;
return post_div;
}
/**
* radeon_uvd_calc_upll_dividers - calc UPLL clock dividers
*
* @rdev: radeon_device pointer
* @vclk: wanted VCLK
* @dclk: wanted DCLK
* @vco_min: minimum VCO frequency
* @vco_max: maximum VCO frequency
* @fb_factor: factor to multiply vco freq with
* @fb_mask: limit and bitmask for feedback divider
* @pd_min: post divider minimum
* @pd_max: post divider maximum
* @pd_even: post divider must be even above this value
* @optimal_fb_div: resulting feedback divider
* @optimal_vclk_div: resulting vclk post divider
* @optimal_dclk_div: resulting dclk post divider
*
* Calculate dividers for UVDs UPLL (R6xx-SI, except APUs).
* Returns zero on success -EINVAL on error.
*/
int radeon_uvd_calc_upll_dividers(struct radeon_device *rdev,
unsigned vclk, unsigned dclk,
unsigned vco_min, unsigned vco_max,
unsigned fb_factor, unsigned fb_mask,
unsigned pd_min, unsigned pd_max,
unsigned pd_even,
unsigned *optimal_fb_div,
unsigned *optimal_vclk_div,
unsigned *optimal_dclk_div)
{
unsigned vco_freq, ref_freq = rdev->clock.spll.reference_freq;
/* start off with something large */
unsigned optimal_score = ~0;
/* loop through vco from low to high */
vco_min = max(max(vco_min, vclk), dclk);
for (vco_freq = vco_min; vco_freq <= vco_max; vco_freq += 100) {
uint64_t fb_div = (uint64_t)vco_freq * fb_factor;
unsigned vclk_div, dclk_div, score;
do_div(fb_div, ref_freq);
/* fb div out of range ? */
if (fb_div > fb_mask)
break; /* it can oly get worse */
fb_div &= fb_mask;
/* calc vclk divider with current vco freq */
vclk_div = radeon_uvd_calc_upll_post_div(vco_freq, vclk,
pd_min, pd_even);
if (vclk_div > pd_max)
break; /* vco is too big, it has to stop */
/* calc dclk divider with current vco freq */
dclk_div = radeon_uvd_calc_upll_post_div(vco_freq, dclk,
pd_min, pd_even);
if (vclk_div > pd_max)
break; /* vco is too big, it has to stop */
/* calc score with current vco freq */
score = vclk - (vco_freq / vclk_div) + dclk - (vco_freq / dclk_div);
/* determine if this vco setting is better than current optimal settings */
if (score < optimal_score) {
*optimal_fb_div = fb_div;
*optimal_vclk_div = vclk_div;
*optimal_dclk_div = dclk_div;
optimal_score = score;
if (optimal_score == 0)
break; /* it can't get better than this */
}
}
/* did we found a valid setup ? */
if (optimal_score == ~0)
return -EINVAL;
return 0;
}
int radeon_uvd_send_upll_ctlreq(struct radeon_device *rdev,
unsigned cg_upll_func_cntl)
{
unsigned i;
/* make sure UPLL_CTLREQ is deasserted */
WREG32_P(cg_upll_func_cntl, 0, ~UPLL_CTLREQ_MASK);
mdelay(10);
/* assert UPLL_CTLREQ */
WREG32_P(cg_upll_func_cntl, UPLL_CTLREQ_MASK, ~UPLL_CTLREQ_MASK);
/* wait for CTLACK and CTLACK2 to get asserted */
for (i = 0; i < 100; ++i) {
uint32_t mask = UPLL_CTLACK_MASK | UPLL_CTLACK2_MASK;
if ((RREG32(cg_upll_func_cntl) & mask) == mask)
break;
mdelay(10);
}
/* deassert UPLL_CTLREQ */
WREG32_P(cg_upll_func_cntl, 0, ~UPLL_CTLREQ_MASK);
if (i == 100) {
DRM_ERROR("Timeout setting UVD clocks!\n");
return -ETIMEDOUT;
}
return 0;
}