Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

arch/arm/mach-exynos/mach-nuri.c

@@ -25,6 +25,7 @@
 #include <linux/mmc/host.h>
 #include <linux/fb.h>
 #include <linux/pwm_backlight.h>
+#include <drm/exynos_drm.h>
 
 #include <video/platform_lcd.h>
 #include <media/m5mols.h>
@@ -210,6 +211,29 @@ static struct platform_device nuri_gpio_keys = {
 	},
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel = {
+		.timing	= {
+			.xres		= 1024,
+			.yres		= 600,
+			.hsync_len	= 40,
+			.left_margin	= 79,
+			.right_margin	= 200,
+			.vsync_len	= 10,
+			.upper_margin	= 10,
+			.lower_margin	= 11,
+			.refresh	= 60,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 3,
+	.bpp		= 32,
+};
+
+#else
 /* Frame Buffer */
 static struct s3c_fb_pd_win nuri_fb_win0 = {
 	.win_mode = {
@@ -236,6 +260,7 @@ static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 {
@@ -1299,6 +1324,9 @@ static struct platform_device *nuri_devices[] __initdata = {
 	&cam_vdda_fixed_rdev,
 	&cam_8m_12v_fixed_rdev,
 	&exynos4_bus_devfreq,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 };
 
 static void __init nuri_map_io(void)
@@ -1331,7 +1359,12 @@ static void __init nuri_machine_init(void)
 	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
 	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&nuri_fb_pdata);
+#endif
 
 	nuri_camera_init();