net: Move && and || to end of previous line

Not including net/atm/

Compiled tested x86 allyesconfig only
Added a > 80 column line or two, which I ignored.
Existing checkpatch plaints willfully, cheerfully ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mac80211/agg-rx.c

@@ -211,9 +211,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	 * check if configuration can support the BA policy
 	 * and if buffer size does not exceeds max value */
 	/* XXX: check own ht delayed BA capability?? */
-	if (((ba_policy != 1)
-		&& (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
-		|| (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+	if (((ba_policy != 1) &&
+	     (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
+	    (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
 		status = WLAN_STATUS_INVALID_QOS_PARAM;
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())

net/mac80211/main.c

@@ -631,8 +631,8 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 	sta_info_stop(local);
 	rate_control_deinitialize(local);
 
-	if (skb_queue_len(&local->skb_queue)
-			|| skb_queue_len(&local->skb_queue_unreliable))
+	if (skb_queue_len(&local->skb_queue) ||
+	    skb_queue_len(&local->skb_queue_unreliable))
 		printk(KERN_WARNING "%s: skb_queue not empty\n",
 		       wiphy_name(local->hw.wiphy));
 	skb_queue_purge(&local->skb_queue);

net/mac80211/mesh.c

@@ -195,8 +195,8 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
 			list_del(&p->list);
 			kmem_cache_free(rm_cache, p);
 			--entries;
-		} else if ((seqnum == p->seqnum)
-				&& (memcmp(sa, p->sa, ETH_ALEN) == 0))
+		} else if ((seqnum == p->seqnum) &&
+			   (memcmp(sa, p->sa, ETH_ALEN) == 0))
 			return -1;
 	}
 

net/mac80211/mesh_hwmp.c

@@ -936,17 +936,16 @@ int mesh_nexthop_lookup(struct sk_buff *skb,
 	}
 
 	if (mpath->flags & MESH_PATH_ACTIVE) {
-		if (time_after(jiffies, mpath->exp_time +
-			msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time))
-				&& !memcmp(sdata->dev->dev_addr, hdr->addr4,
-					   ETH_ALEN)
-				&& !(mpath->flags & MESH_PATH_RESOLVING)
-				&& !(mpath->flags & MESH_PATH_FIXED)) {
+		if (time_after(jiffies,
+			       mpath->exp_time +
+			       msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time)) &&
+		    !memcmp(sdata->dev->dev_addr, hdr->addr4, ETH_ALEN) &&
+		    !(mpath->flags & MESH_PATH_RESOLVING) &&
+		    !(mpath->flags & MESH_PATH_FIXED)) {
 			mesh_queue_preq(mpath,
 					PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		}
-		memcpy(hdr->addr1, mpath->next_hop->sta.addr,
-				ETH_ALEN);
+		memcpy(hdr->addr1, mpath->next_hop->sta.addr, ETH_ALEN);
 	} else {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 		if (!(mpath->flags & MESH_PATH_RESOLVING)) {

net/mac80211/rx.c

@@ -1168,8 +1168,8 @@ ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 			     rx->key))
 			return -EACCES;
 		/* BIP does not use Protected field, so need to check MMIE */
-		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb)
-			     && ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
+			     ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
 			     rx->key))
 			return -EACCES;
 		/*

net/mac80211/tx.c

@@ -366,10 +366,11 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx)
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
 	u32 staflags;
 
-	if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)
-			|| ieee80211_is_auth(hdr->frame_control)
-			|| ieee80211_is_assoc_resp(hdr->frame_control)
-			|| ieee80211_is_reassoc_resp(hdr->frame_control)))
+	if (unlikely(!sta ||
+		     ieee80211_is_probe_resp(hdr->frame_control) ||
+		     ieee80211_is_auth(hdr->frame_control) ||
+		     ieee80211_is_assoc_resp(hdr->frame_control) ||
+		     ieee80211_is_reassoc_resp(hdr->frame_control)))
 		return TX_CONTINUE;
 
 	staflags = get_sta_flags(sta);