Snap for 8757289 from a71f2e154d to android12-5.10-keystone-qcom-release

Change-Id: Iceb62c0926a06ba3c1ba1b1b68f0618cba383575

Documentation/admin-guide/sysctl/kernel.rst

@@ -787,6 +787,7 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::

Documentation/core-api/dma-attributes.rst

@@ -130,3 +130,11 @@ accesses to DMA buffers in both privileged "supervisor" and unprivileged
 subsystem that the buffer is fully accessible at the elevated privilege
 level (and ideally inaccessible or at least read-only at the
 lesser-privileged levels).
+
+DMA_ATTR_OVERWRITE
+------------------
+
+This is a hint to the DMA-mapping subsystem that the device is expected to
+overwrite the entire mapped size, thus the caller does not require any of the
+previous buffer contents to be preserved. This allows bounce-buffering
+implementations to optimise DMA_FROM_DEVICE transfers.

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -44,7 +44,7 @@ patternProperties:
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
+          Contains the chip-select IDs.
 
       nand-ecc-mode:
         description:
@@ -174,6 +174,6 @@ examples:
         nand-ecc-mode = "soft";
         nand-ecc-algo = "bch";
 
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
     };

Documentation/devicetree/bindings/spi/spi-mxic.txt

@@ -8,11 +8,13 @@ Required properties:
 - reg: should contain 2 entries, one for the registers and one for the direct
        mapping area
 - reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
 	  "send_dly_clk" clocks
 
+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
 Example:
 
 	spi@43c30000 {

Documentation/process/stable-kernel-rules.rst

@@ -168,7 +168,16 @@ Trees
  - The finalized and tagged releases of all stable kernels can be found
    in separate branches per version at:
 
-	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
 
 
 Review committee

Documentation/sound/hd-audio/models.rst

@@ -261,6 +261,10 @@ alc-sense-combo
 huawei-mbx-stereo
     Enable initialization verbs for Huawei MBX stereo speakers;
     might be risky, try this at your own risk
+alc298-samsung-headphone
+    Samsung laptops with ALC298
+alc256-samsung-headphone
+    Samsung laptops with ALC256
 
 ALC66x/67x/892
 ==============

Documentation/trace/events.rst

@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 101
+SUBLEVEL = 110
 EXTRAVERSION =
 NAME = Dare mighty things
 

android/abi_gki_aarch64_oplus

@@ -3103,6 +3103,7 @@
   trace_raw_output_prep
   trace_seq_printf
   trace_seq_putc
+  tracing_is_on
   tracing_off
   truncate_inode_pages_range
   truncate_pagecache_range

android/abi_gki_aarch64_qcom

@@ -2034,6 +2034,7 @@
   resched_curr
   reset_control_assert
   reset_control_deassert
+  __reset_control_get
   reset_control_put
   reset_control_reset
   resume_cpus

arch/arc/kernel/process.c

@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;

arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi

@@ -118,7 +118,7 @@
 	};
 
 	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
+		function = "FWSPID";
 		groups = "FWQSPID";
 	};
 

arch/arm/boot/dts/bcm2711.dtsi

@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -432,12 +433,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -446,6 +461,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -454,6 +476,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -462,6 +491,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 

arch/arm/boot/dts/bcm2837.dtsi

@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };

arch/arm/boot/dts/dra7-l4.dtsi

@@ -3448,8 +3448,7 @@
 				ti,timer-pwm;
 			};
 		};
-
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3477,7 +3476,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;

arch/arm/boot/dts/dra7.dtsi

@@ -1093,20 +1093,20 @@
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -260,7 +260,7 @@
 	};
 
 	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {

arch/arm/boot/dts/exynos5420-smdk5420.dts

@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -53,6 +53,31 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};

arch/arm/boot/dts/imx7-colibri.dtsi

@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;

arch/arm/boot/dts/imx7-mba7.dtsi

@@ -250,7 +250,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};

arch/arm/boot/dts/imx7d-pico-hobbit.dts

@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};

arch/arm/boot/dts/imx7d-pico-pi.dts

@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};

arch/arm/boot/dts/imx7d-sdb.dts

@@ -378,14 +378,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};

arch/arm/boot/dts/imx7s-warp.dts

@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;

arch/arm/boot/dts/omap3-devkit8000-common.dtsi

@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};

arch/arm/boot/dts/qcom-ipq4019.dtsi

@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 

arch/arm/boot/dts/qcom-msm8960.dtsi

@@ -146,7 +146,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +194,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -318,7 +320,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 

arch/arm/boot/dts/rk322x.dtsi

@@ -640,8 +640,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;

arch/arm/boot/dts/rk3288.dtsi

@@ -990,7 +990,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/sama5d2.dtsi

@@ -413,7 +413,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 

arch/arm/boot/dts/spear1340.dtsi

@@ -136,9 +136,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
+				dmas = <&dwdma0 13 0 1>,
-					<&dwdma0 13 1 0>;
+					<&dwdma0 12 1 0>;
-				dma-names = "tx", "rx";
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {

arch/arm/boot/dts/spear13xx.dtsi

@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
+				dmas = <&dwdma0 5 0 0>,
-					<&dwdma0 5 0 0>;
+					<&dwdma0 4 0 0>;
-				dma-names = "tx", "rx";
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {

arch/arm/boot/dts/sun8i-v3s.dtsi

@@ -524,6 +524,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -535,16 +546,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
+	host1x@50000000 {
-		compatible = "auo,b133xtn01";
+		dpaux@545c0000 {
-
+			aux-bus {
-		power-supply = <&vdd_3v3_panel>;
+				panel: panel {
-		backlight = <&backlight>;
+					compatible = "auo,b133xtn01";
-		ddc-i2c-bus = <&dpaux>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */

arch/arm/boot/dts/tegra124-nyan-blaze.dts

@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
+	host1x@50000000 {
-		compatible = "samsung,ltn140at29-301";
+		dpaux@545c0000 {
-
+			aux-bus {
-		power-supply = <&vdd_3v3_panel>;
+				panel: panel {
-		backlight = <&backlight>;
+					compatible = "samsung,ltn140at29-301";
-		ddc-i2c-bus = <&dpaux>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {

arch/arm/boot/dts/tegra124-venice2.dts

@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1079,13 +1086,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";

arch/arm/boot/dts/tegra20-tamonten.dtsi

@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;

arch/arm/configs/multi_v5_defconfig

@@ -187,6 +187,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m

arch/arm/crypto/Kconfig

@@ -102,6 +102,8 @@ config CRYPTO_AES_ARM_BS
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
+	select CRYPTO_AES
+	select CRYPTO_CBC
 	select CRYPTO_SIMD
 	help
 	  Use a faster and more secure NEON based implementation of AES in CBC,

arch/arm/kernel/entry-ftrace.S

@@ -22,10 +22,7 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
+ * registers should be clobbered.
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
  *
  * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
@@ -70,26 +67,25 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
+	ldr	lr, [sp, #8]    @ get previous LR
-				@ before the push {lr} of the mcount mechanism
-
-	str     lr, [sp, #0]    @ store LR instead of PC
-
-	ldr     lr, [sp, #8]    @ get previous LR
 
 	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	stmdb   sp!, {ip, lr}
+	str	lr, [sp, #-4]!	@ store previous LR as LR
-	stmdb   sp!, {r0-r11, lr}
+
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
+
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
 	ldr r2, =function_trace_op
 	ldr r2, [r2]				@ pointer to the current
@@ -112,11 +108,9 @@ ftrace_graph_regs_call:
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
+	ldr	lr, [sp], #4			@ restore LR
-	ldr	lr, [sp, #4]			@ restore LR
+	ldr	pc, [sp], #12
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -132,11 +126,9 @@ ftrace_graph_regs_call:
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
+	ldr	lr, [sp], #4			@ restore LR
-	ldr	lr, [sp, #4]			@ restore LR
+	ldr	pc, [sp], #12
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
 
 .endm
 #endif
@@ -202,16 +194,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
+	ldmia	sp!, {r0-r3}
-	ret	ip
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
+	push	{lr}
-	ldmia	sp!, {lr}
+	ldr	lr, [sp, #4]
-	ret	ip
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif

arch/arm/kernel/kgdb.c

@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 

arch/arm/kernel/swp_emulate.c

@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;

arch/arm/kernel/traps.c

@@ -589,7 +589,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);

arch/arm/mach-iop32x/include/mach/entry-macro.S

@@ -20,7 +20,7 @@
 	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
 	cmp     \irqstat, #0
 	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
+	rsbne   \irqnr, \irqnr, #32
 	.endm
 
 	.macro arch_ret_to_user, tmp1, tmp2

arch/arm/mach-iop32x/include/mach/irqs.h

@@ -9,6 +9,6 @@
 #ifndef __IRQS_H
 #define __IRQS_H
 
-#define NR_IRQS			32
+#define NR_IRQS			33
 
 #endif

arch/arm/mach-iop32x/irq.c

@@ -32,14 +32,14 @@ static void intstr_write(u32 val)
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -65,7 +65,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}

arch/arm/mach-iop32x/irqs.h

@@ -7,36 +7,40 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
-#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
-#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
-#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
-#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
-#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
-#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
-#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
-#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
-#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
-#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
-#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
-#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
-#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
-#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
-#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
-#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
-#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
-#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
-#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
-#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
-#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
-#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
-#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
-#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
-#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
-#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
 #endif

arch/arm/mach-mmp/sram.c

@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
+	if (info->sram_size) {
-	list_del(&info->node);
+		mutex_lock(&sram_lock);
-	mutex_unlock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 

arch/arm/mach-mstar/Kconfig

@@ -3,6 +3,7 @@ menuconfig ARCH_MSTARV7
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	help
 	  Support for newer MStar/Sigmastar SoC families that are

arch/arm/mach-omap2/display.c

@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -749,8 +749,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;

arch/arm/mach-s3c/mach-jive.c

@@ -236,11 +236,11 @@ static int __init jive_mtdset(char *options)
 	unsigned long set;
 
 	if (options == NULL || options[0] == '\0')
-		return 0;
+		return 1;
 
 	if (kstrtoul(options, 10, &set)) {
 		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 0;
+		return 1;
 	}
 
 	switch (set) {
@@ -255,7 +255,7 @@ static int __init jive_mtdset(char *options)
 		       "using default.", set);
 	}
 
-	return 0;
+	return 1;
 }
 
 /* parse the mtdset= option given to the kernel command line */

arch/arm/mm/mmu.c

@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -101,6 +101,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;

arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts

@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -43,6 +43,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts

@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;

arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts

@@ -111,8 +111,8 @@
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
+		spi-cpha;
-		spi-cpol = <1>;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
+		spi-cpha;
-		spi-cpol = <1>;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;

arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi

@@ -687,7 +687,7 @@
 			};
 		};
 
-		sata: ahci@663f2000 {
+		sata: sata@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
 			dma-coherent;

arch/arm64/boot/dts/intel/socfpga_agilex.dtsi

@@ -476,7 +476,7 @@
 		};
 
 		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
 			interrupts = <0 93 4>;
 			phys = <&usbphy0>;
@@ -489,7 +489,7 @@
 		};
 
 		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb40000 0x40000>;
 			interrupts = <0 94 4>;
 			phys = <&usbphy0>;

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

@@ -18,6 +18,7 @@
 
 	aliases {
 		spi0 = &spi0;
+		ethernet0 = &eth0;
 		ethernet1 = &eth1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
@@ -137,7 +138,9 @@
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
-	 * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
 	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
 	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
 	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
@@ -146,6 +149,9 @@
 	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
 	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
 	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
 	 */
 	#address-cells = <3>;
 	#size-cells = <2>;

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -495,7 +495,7 @@
 			 * (totaling 127 MiB) for MEM.
 			 */
 			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
-				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -3406,10 +3406,10 @@
 					#clock-cells = <0>;
 					clock-frequency = <9600000>;
 					clock-output-names = "mclk";
-					qcom,micbias1-millivolt = <1800>;
+					qcom,micbias1-microvolt = <1800000>;
-					qcom,micbias2-millivolt = <1800>;
+					qcom,micbias2-microvolt = <1800000>;
-					qcom,micbias3-millivolt = <1800>;
+					qcom,micbias3-microvolt = <1800000>;
-					qcom,micbias4-millivolt = <1800>;
+					qcom,micbias4-microvolt = <1800000>;
 
 					#address-cells = <1>;
 					#size-cells = <1>;

arch/arm64/boot/dts/qcom/sm8150.dtsi

@@ -1114,9 +1114,9 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>,
-					  <SLEEP_TCS   1>,
+					  <SLEEP_TCS   3>,
-					  <WAKE_TCS    1>,
+					  <WAKE_TCS    3>,
-					  <CONTROL_TCS 0>;
+					  <CONTROL_TCS 1>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -665,8 +665,8 @@
 	sd-uhs-sdr104;
 
 	/* Power supply */
-	vqmmc-supply = &vcc1v8_s3;	/* IO line */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
-	vmmc-supply = &vcc_sdio;	/* card's power */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
 
 	#address-cells = <1>;
 	#size-cells = <0>;

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi

@@ -281,7 +281,7 @@
 
 	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &i2s2>;
+		rockchip,cpu = <&i2s0 &spdif>;
 	};
 };
 
@@ -432,10 +432,6 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
-&i2s2 {
-	status = "okay";
-};
-
 &io_domains {
 	status = "okay";
 
@@ -532,6 +528,17 @@ ap_i2c_audio: &i2c8 {
 	vqmmc-supply = <&ppvar_sd_card_io>;
 };
 
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
 &spi1 {
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -472,6 +472,12 @@
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1770,10 +1770,10 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
+			 <&cru PLL_VPLL>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;

arch/arm64/boot/dts/ti/k3-am65-main.dtsi

@@ -35,7 +35,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
+		      <0x00 0x01880000 0x00 0x90000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt

arch/arm64/boot/dts/ti/k3-am65.dtsi

@@ -84,6 +84,7 @@
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
 			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
 			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi

@@ -47,7 +47,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/ti/k3-j7200.dtsi

@@ -127,6 +127,7 @@
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
 			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi

@@ -108,7 +108,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/ti/k3-j721e.dtsi

@@ -136,6 +136,7 @@
 			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
 			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
 			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */

arch/arm64/configs/defconfig

@@ -840,7 +840,7 @@ CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
 CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR=y
 CONFIG_MV_XOR_V2=y

arch/arm64/configs/gki_defconfig

@@ -385,7 +385,6 @@ CONFIG_HVC_DCC=y
 CONFIG_HVC_DCC_SERIALIZE_SMP=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_CAVIUM is not set
 # CONFIG_DEVMEM is not set
 # CONFIG_DEVPORT is not set
 # CONFIG_I2C_COMPAT is not set

arch/arm64/include/asm/vectors.h

@@ -56,14 +56,14 @@ enum arm64_bp_harden_el1_vectors {
 DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
 
 #ifndef CONFIG_UNMAP_KERNEL_AT_EL0
-#define TRAMP_VALIAS	0
+#define TRAMP_VALIAS	0ul
 #endif
 
 static inline const char *
 arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
 {
 	if (arm64_kernel_unmapped_at_el0())
-		return (char *)TRAMP_VALIAS + SZ_2K * slot;
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
 
 	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
 

arch/arm64/kernel/signal.c

@@ -572,10 +572,12 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 {
 	int err;
 
-	err = sigframe_alloc(user, &user->fpsimd_offset,
+	if (system_supports_fpsimd()) {
-			     sizeof(struct fpsimd_context));
+		err = sigframe_alloc(user, &user->fpsimd_offset,
-	if (err)
+				     sizeof(struct fpsimd_context));
-		return err;
+		if (err)
+			return err;
+	}
 
 	/* fault information, if valid */
 	if (add_all || current->thread.fault_code) {

arch/arm64/kvm/vgic/vgic-mmio.c

@@ -248,6 +248,8 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 						    IRQCHIP_STATE_PENDING,
 						    &val);
 			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+		} else if (vgic_irq_is_mapped_level(irq)) {
+			val = vgic_get_phys_line_level(irq);
 		} else {
 			val = irq_is_pending(irq);
 		}

arch/arm64/mm/init.c

@@ -59,8 +59,34 @@ EXPORT_SYMBOL(memstart_addr);
  * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
  * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
  * otherwise it is empty.
+ *
+ * Memory reservation for crash kernel either done early or deferred
+ * depending on DMA memory zones configs (ZONE_DMA) --
+ *
+ * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
+ * here instead of max_zone_phys().  This lets early reservation of
+ * crash kernel memory which has a dependency on arm64_dma_phys_limit.
+ * Reserving memory early for crash kernel allows linear creation of block
+ * mappings (greater than page-granularity) for all the memory bank rangs.
+ * In this scheme a comparatively quicker boot is observed.
+ *
+ * If ZONE_DMA configs are defined, crash kernel memory reservation
+ * is delayed until DMA zone memory range size initilazation performed in
+ * zone_sizes_init().  The defer is necessary to steer clear of DMA zone
+ * memory range to avoid overlap allocation.  So crash kernel memory boundaries
+ * are not known when mapping all bank memory ranges, which otherwise means
+ * not possible to exclude crash kernel range from creating block mappings
+ * so page-granularity mappings are created for the entire memory range.
+ * Hence a slightly slower boot is observed.
+ *
+ * Note: Page-granularity mapppings are necessary for crash kernel memory
+ * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
  */
-phys_addr_t arm64_dma_phys_limit __ro_after_init;
+#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
+phys_addr_t __ro_after_init arm64_dma_phys_limit;
+#else
+phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
+#endif
 
 /*
  * Provide a run-time mean of disabling ZONE_DMA32 if it is enabled via
@@ -217,8 +243,6 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 	if (!arm64_dma_phys_limit)
 		arm64_dma_phys_limit = dma32_phys_limit;
 #endif
-	if (!arm64_dma_phys_limit)
-		arm64_dma_phys_limit = PHYS_MASK + 1;
 	max_zone_pfns[ZONE_NORMAL] = max;
 
 	free_area_init(max_zone_pfns);
@@ -429,6 +453,9 @@ void __init arm64_memblock_init(void)
 
 	reserve_elfcorehdr();
 
+	if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
+		reserve_crashkernel();
+
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 }
 
@@ -475,7 +502,8 @@ void __init bootmem_init(void)
 	 * request_standard_resources() depends on crashkernel's memory being
 	 * reserved, so do it here.
 	 */
-	reserve_crashkernel();
+	if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
+		reserve_crashkernel();
 
 	memblock_dump_all();
 }

arch/arm64/mm/mmu.c

@@ -61,6 +61,7 @@ static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
 static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
 
 static DEFINE_SPINLOCK(swapper_pgdir_lock);
+static DEFINE_MUTEX(fixmap_lock);
 
 void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
 {
@@ -314,6 +315,12 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 	}
 	BUG_ON(p4d_bad(p4d));
 
+	/*
+	 * No need for locking during early boot. And it doesn't work as
+	 * expected with KASLR enabled.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		mutex_lock(&fixmap_lock);
 	pudp = pud_set_fixmap_offset(p4dp, addr);
 	do {
 		pud_t old_pud = READ_ONCE(*pudp);
@@ -344,6 +351,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 	} while (pudp++, addr = next, addr != end);
 
 	pud_clear_fixmap();
+	if (system_state != SYSTEM_BOOTING)
+		mutex_unlock(&fixmap_lock);
 }
 
 static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
@@ -492,7 +501,7 @@ static void __init map_mem(pgd_t *pgdp)
 	int flags = 0;
 	u64 i;
 
-	if (rodata_full || crash_mem_map || debug_pagealloc_enabled() ||
+	if (rodata_full || debug_pagealloc_enabled() ||
 	    IS_ENABLED(CONFIG_KFENCE))
 		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
@@ -504,6 +513,17 @@ static void __init map_mem(pgd_t *pgdp)
 	 */
 	memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
 
+#ifdef CONFIG_KEXEC_CORE
+	if (crash_mem_map) {
+		if (IS_ENABLED(CONFIG_ZONE_DMA) ||
+		    IS_ENABLED(CONFIG_ZONE_DMA32))
+			flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+		else if (crashk_res.end)
+			memblock_mark_nomap(crashk_res.start,
+					    resource_size(&crashk_res));
+	}
+#endif
+
 	/* map all the memory banks */
 	for_each_mem_range(i, &start, &end) {
 		if (start >= end)
@@ -530,6 +550,25 @@ static void __init map_mem(pgd_t *pgdp)
 	__map_memblock(pgdp, kernel_start, kernel_end,
 		       PAGE_KERNEL, NO_CONT_MAPPINGS);
 	memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
+
+	/*
+	 * Use page-level mappings here so that we can shrink the region
+	 * in page granularity and put back unused memory to buddy system
+	 * through /sys/kernel/kexec_crash_size interface.
+	 */
+#ifdef CONFIG_KEXEC_CORE
+	if (crash_mem_map &&
+	    !IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
+		if (crashk_res.end) {
+			__map_memblock(pgdp, crashk_res.start,
+				       crashk_res.end + 1,
+				       PAGE_KERNEL,
+				       NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+			memblock_clear_nomap(crashk_res.start,
+					     resource_size(&crashk_res));
+		}
+	}
+#endif
 }
 
 void mark_rodata_ro(void)

arch/arm64/net/bpf_jit_comp.c

@@ -1041,15 +1041,18 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		goto out_off;
 	}
 
-	/* 1. Initial fake pass to compute ctx->idx. */
+	/*
-
+	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
-	/* Fake pass to fill in ctx->offset. */
+	 *
-	if (build_body(&ctx, extra_pass)) {
+	 * BPF line info needs ctx->offset[i] to be the offset of
+	 * instruction[i] in jited image, so build prologue first.
+	 */
+	if (build_prologue(&ctx, was_classic)) {
 		prog = orig_prog;
 		goto out_off;
 	}
 
-	if (build_prologue(&ctx, was_classic)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@@ -1124,6 +1127,11 @@ skip_init_ctx:
 	prog->jited_len = prog_size;
 
 	if (!prog->is_func || extra_pass) {
+		int i;
+
+		/* offset[prog->len] is the size of program */
+		for (i = 0; i <= prog->len; i++)
+			ctx.offset[i] *= AARCH64_INSN_SIZE;
 		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
 out_off:
 		kfree(ctx.offset);

arch/csky/kernel/perf_callchain.c

@@ -49,7 +49,7 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
 {
 	struct stackframe buftail;
 	unsigned long lr = 0;
-	unsigned long *user_frame_tail = (unsigned long *)fp;
+	unsigned long __user *user_frame_tail = (unsigned long __user *)fp;
 
 	/* Check accessibility of one struct frame_tail beyond */
 	if (!access_ok(user_frame_tail, sizeof(buftail)))

arch/csky/kernel/signal.c

@@ -136,7 +136,7 @@ static inline void __user *get_sigframe(struct ksignal *ksig,
 static int
 setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 	struct csky_vdso *vdso = current->mm->context.vdso;
 

arch/ia64/kernel/acpi.c

@@ -446,7 +446,8 @@ void __init acpi_numa_fixup(void)
 	if (srat_num_cpus == 0) {
 		node_set_online(0);
 		node_cpuid[0].phys_id = hard_smp_processor_id();
-		return;
+		slit_distance(0, 0) = LOCAL_DISTANCE;
+		goto out;
 	}
 
 	/*
@@ -489,7 +490,7 @@ void __init acpi_numa_fixup(void)
 			for (j = 0; j < MAX_NUMNODES; j++)
 				slit_distance(i, j) = i == j ?
 					LOCAL_DISTANCE : REMOTE_DISTANCE;
-		return;
+		goto out;
 	}
 
 	memset(numa_slit, -1, sizeof(numa_slit));
@@ -514,6 +515,8 @@ void __init acpi_numa_fixup(void)
 		printk("\n");
 	}
 #endif
+out:
+	node_possible_map = node_online_map;
 }
 #endif				/* CONFIG_ACPI_NUMA */
 

arch/m68k/coldfire/device.c

@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 = {
 #endif /* MCFI2C_BASE5 */
 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
 
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 
 static const struct dma_slave_map mcf_edma_map[] = {
 	{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma = {
 		.platform_data = &mcf_edma_data,
 	}
 };
-#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#endif /* MCFEDMA_BASE */
 
 #ifdef MCFSDHC_BASE
 static struct mcf_esdhc_platform_data mcf_esdhc_data = {
@@ -610,7 +610,7 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_i2c5,
 #endif
 #endif
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 	&mcf_edma,
 #endif
 #ifdef MCFSDHC_BASE

arch/microblaze/include/asm/uaccess.h

@@ -167,27 +167,27 @@ extern long __user_bad(void);
 
 #define __get_user(x, ptr)						\
 ({									\
-	unsigned long __gu_val = 0;					\
 	long __gu_err;							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__get_user_asm("lbu", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lbu", (ptr), x, __gu_err);		\
 		break;							\
 	case 2:								\
-		__get_user_asm("lhu", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lhu", (ptr), x, __gu_err);		\
 		break;							\
 	case 4:								\
-		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lw", (ptr), x, __gu_err);		\
 		break;							\
-	case 8:								\
+	case 8: {							\
-		__gu_err = __copy_from_user(&__gu_val, ptr, 8);		\
+		__u64 __x = 0;						\
-		if (__gu_err)						\
+		__gu_err = raw_copy_from_user(&__x, ptr, 8) ?		\
-			__gu_err = -EFAULT;				\
+							-EFAULT : 0;	\
+		(x) = (typeof(x))(typeof((x) - (x)))__x;		\
 		break;							\
+	}								\
 	default:							\
 		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
 	}								\
-	x = (__force __typeof__(*(ptr))) __gu_val;			\
 	__gu_err;							\
 })
 

arch/mips/dec/int-handler.S

@@ -131,7 +131,7 @@
 		 */
 		mfc0	t0,CP0_CAUSE		# get pending interrupts
 		mfc0	t1,CP0_STATUS
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		lw	t2,cpu_fpu_mask
 #endif
 		andi	t0,ST0_IM		# CAUSE.CE may be non-zero!
@@ -139,7 +139,7 @@
 
 		beqz	t0,spurious
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 		 and	t2,t0
 		bnez	t2,fpu			# handle FPU immediately
 #endif
@@ -280,7 +280,7 @@ handle_it:
 		j	dec_irq_dispatch
 		 nop
 
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_MIPS_FP_SUPPORT)
 fpu:
 		lw	t0,fpu_kstat_irq
 		nop

arch/mips/dec/prom/Makefile

@@ -6,4 +6,4 @@
 
 lib-y			+= init.o memory.o cmdline.o identify.o console.o
 
-lib-$(CONFIG_32BIT)	+= locore.o
+lib-$(CONFIG_CPU_R3000)	+= locore.o

arch/mips/dec/setup.c

@@ -746,7 +746,8 @@ void __init arch_init_irq(void)
 		dec_interrupt[DEC_IRQ_HALT] = -1;
 
 	/* Register board interrupts: FPU and cascade. */
-	if (dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
+	if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT) &&
+	    dec_interrupt[DEC_IRQ_FPU] >= 0 && cpu_has_fpu) {
 		struct irq_desc *desc_fpu;
 		int irq_fpu;
 

arch/mips/include/asm/dec/prom.h

@@ -43,16 +43,11 @@
  */
 #define REX_PROM_MAGIC		0x30464354
 
-#ifdef CONFIG_64BIT
+/* KN04 and KN05 are REX PROMs, so only do the check for R3k systems.  */
-
+static inline bool prom_is_rex(u32 magic)
-#define prom_is_rex(magic)	1	/* KN04 and KN05 are REX PROMs.  */
+{
-
+	return !IS_ENABLED(CONFIG_CPU_R3000) || magic == REX_PROM_MAGIC;
-#else /* !CONFIG_64BIT */
+}
-
-#define prom_is_rex(magic)	((magic) == REX_PROM_MAGIC)
-
-#endif /* !CONFIG_64BIT */
-
 
 /*
  * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and

arch/mips/include/asm/pgalloc.h

@@ -15,6 +15,7 @@
 
 #define __HAVE_ARCH_PMD_ALLOC_ONE
 #define __HAVE_ARCH_PUD_ALLOC_ONE
+#define __HAVE_ARCH_PGD_FREE
 #include <asm-generic/pgalloc.h>
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
@@ -49,6 +50,11 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 extern void pgd_init(unsigned long page);
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
 #define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_pte_page_dtor(pte);			\

arch/mips/kernel/smp.c

@@ -351,6 +351,9 @@ asmlinkage void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
+	set_cpu_sibling_map(cpu);
+	set_cpu_core_map(cpu);
+
 	cpumask_set_cpu(cpu, &cpu_coherent_mask);
 	notify_cpu_starting(cpu);
 
@@ -362,9 +365,6 @@ asmlinkage void start_secondary(void)
 	/* The CPU is running and counters synchronised, now mark it online */
 	set_cpu_online(cpu, true);
 
-	set_cpu_sibling_map(cpu);
-	set_cpu_core_map(cpu);
-
 	calculate_cpu_foreign_map();
 
 	/*

arch/mips/rb532/devices.c

@@ -310,11 +310,9 @@ static int __init plat_setup_devices(void)
 static int __init setup_kmac(char *s)
 {
 	printk(KERN_INFO "korina mac = %s\n", s);
-	if (!mac_pton(s, korina_dev0_data.mac)) {
+	if (!mac_pton(s, korina_dev0_data.mac))
 		printk(KERN_ERR "Invalid mac\n");
-		return -EINVAL;
+	return 1;
-	}
-	return 0;
 }
 
 __setup("kmac=", setup_kmac);

arch/nds32/include/asm/uaccess.h

@@ -70,9 +70,7 @@ static inline void set_fs(mm_segment_t fs)
  * versions are void (ie, don't return a value as such).
  */
 
-#define get_user	__get_user					\
+#define get_user(x, ptr)						\
-
-#define __get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
 	__get_user_check((x), (ptr), __gu_err);				\
@@ -85,6 +83,14 @@ static inline void set_fs(mm_segment_t fs)
 	(void)0;							\
 })
 
+#define __get_user(x, ptr)						\
+({									\
+	long __gu_err = 0;						\
+	const __typeof__(*(ptr)) __user *__p = (ptr);			\
+	__get_user_err((x), __p, (__gu_err));				\
+	__gu_err;							\
+})
+
 #define __get_user_check(x, ptr, err)					\
 ({									\
 	const __typeof__(*(ptr)) __user *__p = (ptr);			\
@@ -165,12 +171,18 @@ do {									\
 		: "r"(addr), "i"(-EFAULT)				\
 		: "cc")
 
-#define put_user	__put_user					\
+#define put_user(x, ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_check((x), (ptr), __pu_err);				\
+	__pu_err;							\
+})
 
 #define __put_user(x, ptr)						\
 ({									\
 	long __pu_err = 0;						\
-	__put_user_err((x), (ptr), __pu_err);				\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	__put_user_err((x), __p, __pu_err);				\
 	__pu_err;							\
 })