xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Browse Source 
Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
This commit is contained in:
Linus Torvalds
2018-04-02 20:20:12 -07:00
parent c9297d2841 dd3b8c329a
commit f5a8eb632b
2498 changed files with 95 additions and 467668 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
drivers/i2c/busses/Kconfig
View File

@@ -445,24 +445,6 @@ config I2C_BRCMSTB
If you do not need I2C interface, say N.
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
depends on BLACKFIN
depends on !BF561 && !BF531 && !BF532 && !BF533
help
This is the I2C bus driver for Blackfin on-chip TWI interface.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
config I2C_BLACKFIN_TWI_CLK_KHZ
int "Blackfin TWI I2C clock (kHz)"
depends on I2C_BLACKFIN_TWI
range 21 400
default 50
help
The unit of the TWI clock is kHz.
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on ARCH_ZYNQ || ARM64 || XTENSA
@@ -637,7 +619,7 @@ config I2C_IBM_IIC
config I2C_IMG
tristate "Imagination Technologies I2C SCB Controller"
depends on MIPS || METAG || COMPILE_TEST
depends on MIPS || COMPILE_TEST
help
Say Y here if you want to use the IMG I2C SCB controller,
available on the TZ1090 and other IMG SoCs.

1
drivers/i2c/busses/Makefile
View File

@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o

737
drivers/i2c/busses/i2c-bfin-twi.c
View File

@@ -1,737 +0,0 @@
/*
* Blackfin On-Chip Two Wire Interface Driver
*
* Copyright 2005-2007 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/irq.h>
#include <asm/portmux.h>
#include <asm/bfin_twi.h>
/* SMBus mode*/
#define TWI_I2C_MODE_STANDARD 1
#define TWI_I2C_MODE_STANDARDSUB 2
#define TWI_I2C_MODE_COMBINED 3
#define TWI_I2C_MODE_REPEAT 4
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short twi_int_status)
{
unsigned short mast_stat = read_MASTER_STAT(iface);
if (twi_int_status & XMTSERV) {
if (iface->writeNum <= 0) {
/* start receive immediately after complete sending in
* combine mode.
*/
if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR);
else if (iface->manual_stop)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags &
I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) |
MDIR);
else
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) &
~MDIR);
}
}
/* Transmit next data */
while (iface->writeNum > 0 &&
(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
}
if (twi_int_status & RCVSERV) {
while (iface->readNum > 0 &&
(read_FIFO_STAT(iface) & RCVSTAT)) {
/* Receive next data */
*(iface->transPtr) = read_RCV_DATA8(iface);
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
/* Change combine mode into sub mode after
* read first data.
*/
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
/* Get read number from first byte in block
* combine mode.
*/
if (iface->readNum == 1 && iface->manual_stop)
iface->readNum = *iface->transPtr + 1;
}
iface->transPtr++;
iface->readNum--;
}
if (iface->readNum == 0) {
if (iface->manual_stop) {
/* Temporary workaround to avoid possible bus stall -
* Flush FIFO before issuing the STOP condition
*/
read_RCV_DATA16(iface);
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | STOP);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | MDIR);
else
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~MDIR);
}
}
}
if (twi_int_status & MERR) {
write_INT_MASK(iface, 0);
write_MASTER_STAT(iface, 0x3e);
write_MASTER_CTL(iface, 0);
iface->result = -EIO;
if (mast_stat & LOSTARB)
dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
if (mast_stat & ANAK)
dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
if (mast_stat & DNAK)
dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
if (mast_stat & BUFRDERR)
dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
if (mast_stat & BUFWRERR)
dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
/* Faulty slave devices, may drive SDA low after a transfer
* finishes. To release the bus this code generates up to 9
* extra clocks until SDA is released.
*/
if (read_MASTER_STAT(iface) & SDASEN) {
int cnt = 9;
do {
write_MASTER_CTL(iface, SCLOVR);
udelay(6);
write_MASTER_CTL(iface, 0);
udelay(6);
} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
write_MASTER_CTL(iface, SDAOVR | SCLOVR);
udelay(6);
write_MASTER_CTL(iface, SDAOVR);
udelay(6);
write_MASTER_CTL(iface, 0);
}
/* If it is a quick transfer, only address without data,
* not an err, return 1.
*/
if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
iface->transPtr == NULL &&
(twi_int_status & MCOMP) && (mast_stat & DNAK))
iface->result = 1;
complete(&iface->complete);
return;
}
if (twi_int_status & MCOMP) {
if (twi_int_status & (XMTSERV | RCVSERV) &&
(read_MASTER_CTL(iface) & MEN) == 0 &&
(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
iface->result = -1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
if (iface->readNum == 0) {
/* set the read number to 1 and ask for manual
* stop in block combine mode
*/
iface->readNum = 1;
iface->manual_stop = 1;
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) | (0xff << 6));
} else {
/* set the readd number in other
* combine mode.
*/
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
(iface->readNum << 6));
}
/* remove restart bit and enable master receive */
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
iface->cur_msg + 1 < iface->msg_num) {
iface->cur_msg++;
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
iface->writeNum = iface->readNum =
iface->pmsg[iface->cur_msg].len;
/* Set Transmit device address */
write_MASTER_ADDR(iface,
iface->pmsg[iface->cur_msg].addr);
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
else {
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
write_XMT_DATA8(iface,
*(iface->transPtr++));
iface->writeNum--;
}
}
if (iface->pmsg[iface->cur_msg].len <= 255) {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) &
(~(0xff << 6))) |
(iface->pmsg[iface->cur_msg].len << 6));
iface->manual_stop = 0;
} else {
write_MASTER_CTL(iface,
(read_MASTER_CTL(iface) |
(0xff << 6)));
iface->manual_stop = 1;
}
/* remove restart bit before last message */
if (iface->cur_msg + 1 == iface->msg_num)
write_MASTER_CTL(iface,
read_MASTER_CTL(iface) & ~RSTART);
} else {
iface->result = 1;
write_INT_MASK(iface, 0);
write_MASTER_CTL(iface, 0);
}
complete(&iface->complete);
}
}
/* Interrupt handler */
static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
{
struct bfin_twi_iface *iface = dev_id;
unsigned long flags;
unsigned short twi_int_status;
spin_lock_irqsave(&iface->lock, flags);
while (1) {
twi_int_status = read_INT_STAT(iface);
if (!twi_int_status)
break;
/* Clear interrupt status */
write_INT_STAT(iface, twi_int_status);
bfin_twi_handle_interrupt(iface, twi_int_status);
}
spin_unlock_irqrestore(&iface->lock, flags);
return IRQ_HANDLED;
}
/*
* One i2c master transfer
*/
static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct bfin_twi_iface *iface = adap->algo_data;
struct i2c_msg *pmsg;
int rc = 0;
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->pmsg = msgs;
iface->msg_num = num;
iface->cur_msg = 0;
pmsg = &msgs[0];
if (pmsg->flags & I2C_M_TEN) {
dev_err(&adap->dev, "10 bits addr not supported!\n");
return -EINVAL;
}
if (iface->msg_num > 1)
iface->cur_mode = TWI_I2C_MODE_REPEAT;
iface->manual_stop = 0;
iface->transPtr = pmsg->buf;
iface->writeNum = iface->readNum = pmsg->len;
iface->result = 0;
init_completion(&(iface->complete));
/* Set Transmit device address */
write_MASTER_ADDR(iface, pmsg->addr);
/* FIFO Initiation. Data in FIFO should be
* discarded before start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
write_FIFO_CTL(iface, 0);
if (pmsg->flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
else {
iface->read_write = I2C_SMBUS_WRITE;
/* Transmit first data */
if (iface->writeNum > 0) {
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
}
/* clear int stat */
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Interrupt mask . Enable XMT, RCV interrupt */
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
if (pmsg->len <= 255)
write_MASTER_CTL(iface, pmsg->len << 6);
else {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
(iface->msg_num > 1 ? RSTART : 0) |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
adap->timeout)) {
iface->result = -1;
dev_err(&adap->dev, "master transfer timeout\n");
}
}
if (iface->result == 1)
rc = iface->cur_msg + 1;
else
rc = iface->result;
return rc;
}
/*
* Generic i2c master transfer entrypoint
*/
static int bfin_twi_master_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
return bfin_twi_do_master_xfer(adap, msgs, num);
}
/*
* One I2C SMBus transfer
*/
int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
struct bfin_twi_iface *iface = adap->algo_data;
int rc = 0;
if (!(read_CONTROL(iface) & TWI_ENA))
return -ENXIO;
if (read_MASTER_STAT(iface) & BUSBUSY)
return -EAGAIN;
iface->writeNum = 0;
iface->readNum = 0;
/* Prepare datas & select mode */
switch (size) {
case I2C_SMBUS_QUICK:
iface->transPtr = NULL;
iface->cur_mode = TWI_I2C_MODE_STANDARD;
break;
case I2C_SMBUS_BYTE:
if (data == NULL)
iface->transPtr = NULL;
else {
if (read_write == I2C_SMBUS_READ)
iface->readNum = 1;
else
iface->writeNum = 1;
iface->transPtr = &data->byte;
}
iface->cur_mode = TWI_I2C_MODE_STANDARD;
break;
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 1;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = 1;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = &data->byte;
break;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 2;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = 2;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = (u8 *)&data->word;
break;
case I2C_SMBUS_PROC_CALL:
iface->writeNum = 2;
iface->readNum = 2;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
iface->transPtr = (u8 *)&data->word;
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = 0;
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = data->block[0] + 1;
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = data->block;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
iface->readNum = data->block[0];
iface->cur_mode = TWI_I2C_MODE_COMBINED;
} else {
iface->writeNum = data->block[0];
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
}
iface->transPtr = (u8 *)&data->block[1];
break;
default:
return -1;
}
iface->result = 0;
iface->manual_stop = 0;
iface->read_write = read_write;
iface->command = command;
init_completion(&(iface->complete));
/* FIFO Initiation. Data in FIFO should be discarded before
* start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
write_FIFO_CTL(iface, 0);
/* clear int stat */
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
/* Set Transmit device address */
write_MASTER_ADDR(iface, addr);
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
if (iface->writeNum + 1 <= 255)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
}
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
case TWI_I2C_MODE_COMBINED:
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
if (iface->writeNum > 0)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
else
write_MASTER_CTL(iface, 0x1 << 6);
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
break;
default:
write_MASTER_CTL(iface, 0);
if (size != I2C_SMBUS_QUICK) {
/* Don't access xmit data register when this is a
* read operation.
*/
if (iface->read_write != I2C_SMBUS_READ) {
if (iface->writeNum > 0) {
write_XMT_DATA8(iface,
*(iface->transPtr++));
if (iface->writeNum <= 255)
write_MASTER_CTL(iface,
iface->writeNum << 6);
else {
write_MASTER_CTL(iface,
0xff << 6);
iface->manual_stop = 1;
}
iface->writeNum--;
} else {
write_XMT_DATA8(iface, iface->command);
write_MASTER_CTL(iface, 1 << 6);
}
} else {
if (iface->readNum > 0 && iface->readNum <= 255)
write_MASTER_CTL(iface,
iface->readNum << 6);
else if (iface->readNum > 255) {
write_MASTER_CTL(iface, 0xff << 6);
iface->manual_stop = 1;
} else
break;
}
}
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
break;
}
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
adap->timeout)) {
iface->result = -1;
dev_err(&adap->dev, "smbus transfer timeout\n");
}
}
rc = (iface->result >= 0) ? 0 : -1;
return rc;
}
/*
* Generic I2C SMBus transfer entrypoint
*/
int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data *data)
{
return bfin_twi_do_smbus_xfer(adap, addr, flags,
read_write, command, size, data);
}
/*
* Return what the adapter supports
*/
static u32 bfin_twi_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
}
static const struct i2c_algorithm bfin_twi_algorithm = {
.master_xfer = bfin_twi_master_xfer,
.smbus_xfer = bfin_twi_smbus_xfer,
.functionality = bfin_twi_functionality,
};
#ifdef CONFIG_PM_SLEEP
static int i2c_bfin_twi_suspend(struct device *dev)
{
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
iface->saved_clkdiv = read_CLKDIV(iface);
iface->saved_control = read_CONTROL(iface);
free_irq(iface->irq, iface);
/* Disable TWI */
write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
return 0;
}
static int i2c_bfin_twi_resume(struct device *dev)
{
struct bfin_twi_iface *iface = dev_get_drvdata(dev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
0, to_platform_device(dev)->name, iface);
if (rc) {
dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
}
/* Resume TWI interface clock as specified */
write_CLKDIV(iface, iface->saved_clkdiv);
/* Resume TWI */
write_CONTROL(iface, iface->saved_control);
return 0;
}
static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
#else
#define I2C_BFIN_TWI_PM_OPS NULL
#endif
static int i2c_bfin_twi_probe(struct platform_device *pdev)
{
struct bfin_twi_iface *iface;
struct i2c_adapter *p_adap;
struct resource *res;
int rc;
unsigned int clkhilow;
iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
GFP_KERNEL);
if (!iface) {
dev_err(&pdev->dev, "Cannot allocate memory\n");
return -ENOMEM;
}
spin_lock_init(&(iface->lock));
/* Find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(iface->regs_base)) {
dev_err(&pdev->dev, "Cannot map IO\n");
return PTR_ERR(iface->regs_base);
}
iface->irq = platform_get_irq(pdev, 0);
if (iface->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
return -ENOENT;
}
p_adap = &iface->adap;
p_adap->nr = pdev->id;
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
p_adap->class = I2C_CLASS_DEPRECATED;
p_adap->dev.parent = &pdev->dev;
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
rc = peripheral_request_list(
dev_get_platdata(&pdev->dev),
"i2c-bfin-twi");
if (rc) {
dev_err(&pdev->dev, "Can't setup pin mux!\n");
return -EBUSY;
}
rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
rc = -ENODEV;
goto out_error;
}
/* Set TWI internal clock as 10MHz */
write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
/*
* We will not end up with a CLKDIV=0 because no one will specify
* 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
*/
clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
/* Set Twi interface clock as specified */
write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
/* Enable TWI */
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
rc = i2c_add_numbered_adapter(p_adap);
if (rc < 0)
goto out_error;
platform_set_drvdata(pdev, iface);
dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
"regs_base@%p\n", iface->regs_base);
return 0;
out_error:
peripheral_free_list(dev_get_platdata(&pdev->dev));
return rc;
}
static int i2c_bfin_twi_remove(struct platform_device *pdev)
{
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
i2c_del_adapter(&(iface->adap));
peripheral_free_list(dev_get_platdata(&pdev->dev));
return 0;
}
static struct platform_driver i2c_bfin_twi_driver = {
.probe = i2c_bfin_twi_probe,
.remove = i2c_bfin_twi_remove,
.driver = {
.name = "i2c-bfin-twi",
.pm = I2C_BFIN_TWI_PM_OPS,
},
};
static int __init i2c_bfin_twi_init(void)
{
return platform_driver_register(&i2c_bfin_twi_driver);
}
static void __exit i2c_bfin_twi_exit(void)
{
platform_driver_unregister(&i2c_bfin_twi_driver);
}
subsys_initcall(i2c_bfin_twi_init);
module_exit(i2c_bfin_twi_exit);
MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:i2c-bfin-twi");