Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...

arch/arm/Kconfig.debug

@@ -318,6 +318,7 @@ choice
 	config DEBUG_MSM_UART1
 		bool "Kernel low-level debugging messages via MSM UART1"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the first serial port on MSM devices.
@@ -325,6 +326,7 @@ choice
 	config DEBUG_MSM_UART2
 		bool "Kernel low-level debugging messages via MSM UART2"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on MSM devices.
@@ -332,6 +334,7 @@ choice
 	config DEBUG_MSM_UART3
 		bool "Kernel low-level debugging messages via MSM UART3"
 		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the third serial port on MSM devices.
@@ -340,6 +343,7 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8660 UART"
 		depends on ARCH_MSM8X60
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8660 devices.
@@ -348,10 +352,20 @@ choice
 		bool "Kernel low-level debugging messages via MSM 8960 UART"
 		depends on ARCH_MSM8960
 		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the serial port on MSM 8960 devices.
 
+	config DEBUG_MSM8974_UART
+		bool "Kernel low-level debugging messages via MSM 8974 UART"
+		depends on ARCH_MSM8974
+		select MSM_HAS_DEBUG_UART_HS
+		select DEBUG_MSM_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8974 devices.
+
 	config DEBUG_MVEBU_UART
 		bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
 		depends on ARCH_MVEBU
@@ -841,6 +855,20 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
+	config DEBUG_LL_UART_EFM32
+		bool "Kernel low-level debugging via efm32 UART"
+		depends on ARCH_EFM32
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to an UART or USART port on efm32 based
+		  machines. Use the following addresses for DEBUG_UART_PHYS:
+
+		    0x4000c000 | USART0
+		    0x4000c400 | USART1
+		    0x4000c800 | USART2
+		    0x4000e000 | UART0
+		    0x4000e400 | UART1
+
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -887,11 +915,16 @@ config DEBUG_STI_UART
 	bool
 	depends on ARCH_STI
 
+config DEBUG_MSM_UART
+	bool
+	depends on ARCH_MSM
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
+	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
@@ -902,11 +935,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART
-	default "debug/msm.S" if DEBUG_MSM_UART1 || \
-				 DEBUG_MSM_UART2 || \
-				 DEBUG_MSM_UART3 || \
-				 DEBUG_MSM8660_UART || \
-				 DEBUG_MSM8960_UART
+	default "debug/msm.S" if DEBUG_MSM_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
 	default "debug/sti.S" if DEBUG_STI_UART
@@ -959,6 +988,7 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40090000 if ARCH_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
 	default 0x42000000 if ARCH_GEMINI
@@ -989,6 +1019,7 @@ config DEBUG_UART_PHYS
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X
 
 config DEBUG_UART_VIRT