wil6210: fix HALP handling in case of HALP vote time-out

In case HALP vote times out, we need to mask the HALP IRQ, as done
in case the interrupt is received, as this interrupt should be
set until completion of the low latency operation.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/wil6210/interrupt.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -101,7 +101,7 @@ static void wil6210_mask_irq_misc(struct wil6210_priv *wil, bool mask_halp)
 	      mask_halp ? WIL6210_IRQ_DISABLE : WIL6210_IRQ_DISABLE_NO_HALP);
 }
 
-static void wil6210_mask_halp(struct wil6210_priv *wil)
+void wil6210_mask_halp(struct wil6210_priv *wil)
 {
 	wil_dbg_irq(wil, "%s()\n", __func__);
 
@@ -503,6 +503,13 @@ static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
 				offsetof(struct RGF_ICR, ICR));
 		u32 imv_misc = wil_r(wil, RGF_DMA_EP_MISC_ICR +
 				     offsetof(struct RGF_ICR, IMV));
+
+		/* HALP interrupt can be unmasked when misc interrupts are
+		 * masked
+		 */
+		if (icr_misc & BIT_DMA_EP_MISC_ICR_HALP)
+			return 0;
+
 		wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n"
 				"Rx   icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
 				"Tx   icm:icr:imv 0x%08x 0x%08x 0x%08x\n"

drivers/net/wireless/ath/wil6210/main.c

@@ -1124,13 +1124,16 @@ void wil_halp_vote(struct wil6210_priv *wil)
 	if (++wil->halp.ref_cnt == 1) {
 		wil6210_set_halp(wil);
 		rc = wait_for_completion_timeout(&wil->halp.comp, to_jiffies);
-		if (!rc)
+		if (!rc) {
 			wil_err(wil, "%s: HALP vote timed out\n", __func__);
-		else
+			/* Mask HALP as done in case the interrupt is raised */
+			wil6210_mask_halp(wil);
+		} else {
 			wil_dbg_misc(wil,
 				     "%s: HALP vote completed after %d ms\n",
 				     __func__,
 				     jiffies_to_msecs(to_jiffies - rc));
+		}
 	}
 
 	wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -828,6 +828,7 @@ void wil_unmask_irq(struct wil6210_priv *wil);
 void wil_configure_interrupt_moderation(struct wil6210_priv *wil);
 void wil_disable_irq(struct wil6210_priv *wil);
 void wil_enable_irq(struct wil6210_priv *wil);
+void wil6210_mask_halp(struct wil6210_priv *wil);
 
 /* P2P */
 bool wil_p2p_is_social_scan(struct cfg80211_scan_request *request);