xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Código Issues Pull requests Ações Pacotes Projetos Versões Wiki Atividade

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Ver código fonte 
Pull input layer updates from Dmitry Torokhov:

 - evdev interface has been adjusted to extend the life of timestamps on
   32 bit systems to the year of 2108

 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to
   improve chances of detecting trackpoints on the pass-through port

 - mms114 touchcsreen controller driver has been updated to support
   generic device properties and work with mms152 cntrollers

 - Goodix driver now supports generic touchscreen properties

 - couple of drivers for AVR32 architecture are gone as the architecture
   support has been removed from the kernel

 - gpio-tilt driver has been removed as there are no mainline users and
   the driver itself is using legacy APIs and relies on platform data

 - MODULE_LINECSE/MODULE_VERSION cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: goodix - use generic touchscreen_properties
  Input: mms114 - fix typo in definition
  Input: mms114 - use BIT() macro instead of explicit shifting
  Input: mms114 - replace mdelay with msleep
  Input: mms114 - add support for mms152
  Input: mms114 - drop platform data and use generic APIs
  Input: mms114 - mark as direct input device
  Input: mms114 - do not clobber interrupt trigger
  Input: edt-ft5x06 - fix error handling for factory mode on non-M06
  Input: stmfts - set IRQ_NOAUTOEN to the irq flag
  Input: auo-pixcir-ts - delete an unnecessary return statement
  Input: auo-pixcir-ts - remove custom log for a failed memory allocation
  Input: da9052_tsi - remove unused mutex
  Input: docs - use PROPERTY_ENTRY_U32() directly
  Input: synaptics-rmi4 - log when we create a guest serio port
  Input: synaptics-rmi4 - unmask F03 interrupts when port is opened
  Input: synaptics-rmi4 - do not delete interrupt memory too early
  Input: ad7877 - use managed resource allocations
  Input: stmfts,s6sy671 - add SPDX identifier
  Input: remove atmel-wm97xx touchscreen driver
  ...
Esse commit está contido em:
Linus Torvalds
2018-02-01 10:49:58 -08:00
pai f6cff79f1d d67ad78e09
commit eea43ed86f
65 arquivos alterados com 503 adições e 1758 exclusões
Baixar arquivo de patch Baixar arquivo de diferenças Expandir todos os arquivos Colapsar todos os arquivos

16
drivers/input/misc/Kconfig
Ver arquivo

@@ -268,20 +268,6 @@ config INPUT_GPIO_BEEPER
To compile this driver as a module, choose M here: the
module will be called gpio-beeper.
config INPUT_GPIO_TILT_POLLED
tristate "Polled GPIO tilt switch"
depends on GPIOLIB || COMPILE_TEST
select INPUT_POLLDEV
help
This driver implements support for tilt switches connected
to GPIO pins that are not capable of generating interrupts.
The list of gpios to use and the mapping of their states
to specific angles is done via platform data.
To compile this driver as a module, choose M here: the
module will be called gpio_tilt_polled.
config INPUT_GPIO_DECODER
tristate "Polled GPIO Decoder Input driver"
depends on GPIOLIB || COMPILE_TEST
@@ -468,7 +454,7 @@ config INPUT_TPS65218_PWRBUTTON
tristate "TPS65218 Power button driver"
depends on (MFD_TPS65217 || MFD_TPS65218)
help
Say Y here if you want to enable power buttong reporting for
Say Y here if you want to enable power button reporting for
TPS65217 and TPS65218 Power Management IC devices.
To compile this driver as a module, choose M here. The module will

1
drivers/input/misc/Makefile
Ver arquivo

@@ -36,7 +36,6 @@ obj-$(CONFIG_INPUT_DRV2665_HAPTICS) += drv2665.o
obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o

2
drivers/input/misc/apanel.c
Ver arquivo

@@ -26,7 +26,6 @@
#include <linux/leds.h>
#define APANEL_NAME "Fujitsu Application Panel"
#define APANEL_VERSION "1.3.1"
#define APANEL "apanel"
/* How often we poll keys - msecs */
@@ -345,7 +344,6 @@ module_exit(apanel_cleanup);
MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_DESCRIPTION(APANEL_NAME " driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(APANEL_VERSION);
MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifeBook*:pvr*:rvnFUJITSU:*");
MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifebook*:pvr*:rvnFUJITSU:*");

2
drivers/input/misc/ati_remote2.c
Ver arquivo

@@ -14,10 +14,8 @@
#include <linux/module.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.3"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
MODULE_LICENSE("GPL");

210
drivers/input/misc/gpio_tilt_polled.c
Ver arquivo

@@ -1,210 +0,0 @@
/*
* Driver for tilt switches connected via GPIO lines
* not capable of generating interrupts
*
* Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de>
*
* based on: drivers/input/keyboard/gpio_keys_polled.c
*
* Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input/gpio_tilt.h>
#define DRV_NAME "gpio-tilt-polled"
struct gpio_tilt_polled_dev {
struct input_polled_dev *poll_dev;
struct device *dev;
const struct gpio_tilt_platform_data *pdata;
int last_state;
int threshold;
int count;
};
static void gpio_tilt_polled_poll(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
struct input_dev *input = dev->input;
struct gpio_tilt_state *tilt_state = NULL;
int state, i;
if (tdev->count < tdev->threshold) {
tdev->count++;
} else {
state = 0;
for (i = 0; i < pdata->nr_gpios; i++)
state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i);
if (state != tdev->last_state) {
for (i = 0; i < pdata->nr_states; i++)
if (pdata->states[i].gpios == state)
tilt_state = &pdata->states[i];
if (tilt_state) {
for (i = 0; i < pdata->nr_axes; i++)
input_report_abs(input,
pdata->axes[i].axis,
tilt_state->axes[i]);
input_sync(input);
}
tdev->count = 0;
tdev->last_state = state;
}
}
}
static void gpio_tilt_polled_open(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
if (pdata->enable)
pdata->enable(tdev->dev);
/* report initial state of the axes */
tdev->last_state = -1;
tdev->count = tdev->threshold;
gpio_tilt_polled_poll(tdev->poll_dev);
}
static void gpio_tilt_polled_close(struct input_polled_dev *dev)
{
struct gpio_tilt_polled_dev *tdev = dev->private;
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
if (pdata->disable)
pdata->disable(tdev->dev);
}
static int gpio_tilt_polled_probe(struct platform_device *pdev)
{
const struct gpio_tilt_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct device *dev = &pdev->dev;
struct gpio_tilt_polled_dev *tdev;
struct input_polled_dev *poll_dev;
struct input_dev *input;
int error, i;
if (!pdata || !pdata->poll_interval)
return -EINVAL;
tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL);
if (!tdev) {
dev_err(dev, "no memory for private data\n");
return -ENOMEM;
}
error = gpio_request_array(pdata->gpios, pdata->nr_gpios);
if (error) {
dev_err(dev,
"Could not request tilt GPIOs: %d\n", error);
goto err_free_tdev;
}
poll_dev = input_allocate_polled_device();
if (!poll_dev) {
dev_err(dev, "no memory for polled device\n");
error = -ENOMEM;
goto err_free_gpios;
}
poll_dev->private = tdev;
poll_dev->poll = gpio_tilt_polled_poll;
poll_dev->poll_interval = pdata->poll_interval;
poll_dev->open = gpio_tilt_polled_open;
poll_dev->close = gpio_tilt_polled_close;
input = poll_dev->input;
input->name = pdev->name;
input->phys = DRV_NAME"/input0";
input->dev.parent = dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
__set_bit(EV_ABS, input->evbit);
for (i = 0; i < pdata->nr_axes; i++)
input_set_abs_params(input, pdata->axes[i].axis,
pdata->axes[i].min, pdata->axes[i].max,
pdata->axes[i].fuzz, pdata->axes[i].flat);
tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval,
pdata->poll_interval);
tdev->poll_dev = poll_dev;
tdev->dev = dev;
tdev->pdata = pdata;
error = input_register_polled_device(poll_dev);
if (error) {
dev_err(dev, "unable to register polled device, err=%d\n",
error);
goto err_free_polldev;
}
platform_set_drvdata(pdev, tdev);
return 0;
err_free_polldev:
input_free_polled_device(poll_dev);
err_free_gpios:
gpio_free_array(pdata->gpios, pdata->nr_gpios);
err_free_tdev:
kfree(tdev);
return error;
}
static int gpio_tilt_polled_remove(struct platform_device *pdev)
{
struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
const struct gpio_tilt_platform_data *pdata = tdev->pdata;
input_unregister_polled_device(tdev->poll_dev);
input_free_polled_device(tdev->poll_dev);
gpio_free_array(pdata->gpios, pdata->nr_gpios);
kfree(tdev);
return 0;
}
static struct platform_driver gpio_tilt_polled_driver = {
.probe = gpio_tilt_polled_probe,
.remove = gpio_tilt_polled_remove,
.driver = {
.name = DRV_NAME,
},
};
module_platform_driver(gpio_tilt_polled_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_DESCRIPTION("Polled GPIO tilt driver");
MODULE_ALIAS("platform:" DRV_NAME);

11
drivers/input/misc/keyspan_remote.c
Ver arquivo

@@ -17,11 +17,6 @@
#include <linux/module.h>
#include <linux/usb/input.h>
#define DRIVER_VERSION "v0.1"
#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
#define DRIVER_DESC "Driver for the USB Keyspan remote control."
#define DRIVER_LICENSE "GPL"
/* Parameters that can be passed to the driver. */
static int debug;
module_param(debug, int, 0444);
@@ -590,6 +585,6 @@ static struct usb_driver keyspan_driver =
module_usb_driver(keyspan_driver);
MODULE_DEVICE_TABLE(usb, keyspan_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
MODULE_AUTHOR("Michael Downey <downey@zymeta.com>");
MODULE_DESCRIPTION("Driver for the USB Keyspan remote control.");
MODULE_LICENSE("GPL");

6
drivers/input/misc/uinput.c
Ver arquivo

@@ -84,11 +84,14 @@ static int uinput_dev_event(struct input_dev *dev,
unsigned int type, unsigned int code, int value)
{
struct uinput_device *udev = input_get_drvdata(dev);
struct timespec64 ts;
udev->buff[udev->head].type = type;
udev->buff[udev->head].code = code;
udev->buff[udev->head].value = value;
do_gettimeofday(&udev->buff[udev->head].time);
ktime_get_ts64(&ts);
udev->buff[udev->head].input_event_sec = ts.tv_sec;
udev->buff[udev->head].input_event_usec = ts.tv_nsec / NSEC_PER_USEC;
udev->head = (udev->head + 1) % UINPUT_BUFFER_SIZE;
wake_up_interruptible(&udev->waitq);
@@ -1085,4 +1088,3 @@ MODULE_ALIAS("devname:" UINPUT_NAME);
MODULE_AUTHOR("Aristeu Sergio Rozanski Filho");
MODULE_DESCRIPTION("User level driver support for input subsystem");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.3");

6
drivers/input/misc/yealink.c
Ver arquivo

@@ -56,8 +56,6 @@
#include "yealink.h"
#define DRIVER_VERSION "yld-20051230"
#define DRIVER_AUTHOR "Henk Vergonet"
#define DRIVER_DESC "Yealink phone driver"
#define YEALINK_POLLING_FREQUENCY 10 /* in [Hz] */
@@ -1006,6 +1004,6 @@ module_usb_driver(yealink_driver);
MODULE_DEVICE_TABLE (usb, usb_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Henk Vergonet");
MODULE_DESCRIPTION("Yealink phone driver");
MODULE_LICENSE("GPL");