iwlwifi: trans: use a unified transport status

The same bits are employed in all transport layers. Put the status
field in the common transport layer. This allows us to employ them
in common transport code.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

drivers/net/wireless/iwlwifi/pcie/internal.h

@@ -256,7 +256,6 @@ iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
  * @hw_base: pci hardware address support
  * @ucode_write_complete: indicates that the ucode has been copied.
  * @ucode_write_waitq: wait queue for uCode load
- * @status - transport specific status flags
  * @cmd_queue - command queue number
  * @rx_buf_size_8k: 8 kB RX buffer size
  * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes)
@@ -296,7 +295,6 @@ struct iwl_trans_pcie {
 	wait_queue_head_t ucode_write_waitq;
 	wait_queue_head_t wait_command_queue;
 
-	unsigned long status;
 	u8 cmd_queue;
 	u8 cmd_fifo;
 	u8 n_no_reclaim_cmds;
@@ -315,24 +313,6 @@ struct iwl_trans_pcie {
 	spinlock_t reg_lock;
 };
 
-/**
- * enum iwl_pcie_status: status of the PCIe transport
- * @STATUS_HCMD_ACTIVE: a SYNC command is being processed
- * @STATUS_DEVICE_ENABLED: APM is enabled
- * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
- * @STATUS_INT_ENABLED: interrupts are enabled
- * @STATUS_RFKILL: the HW RFkill switch is in KILL position
- * @STATUS_FW_ERROR: the fw is in error state
- */
-enum iwl_pcie_status {
-	STATUS_HCMD_ACTIVE,
-	STATUS_DEVICE_ENABLED,
-	STATUS_TPOWER_PMI,
-	STATUS_INT_ENABLED,
-	STATUS_RFKILL,
-	STATUS_FW_ERROR,
-};
-
 #define IWL_TRANS_GET_PCIE_TRANS(_iwl_trans) \
 	((struct iwl_trans_pcie *) ((_iwl_trans)->trans_specific))
 
@@ -399,8 +379,7 @@ void iwl_pcie_dump_csr(struct iwl_trans *trans);
 ******************************************************/
 static inline void iwl_disable_interrupts(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	clear_bit(STATUS_INT_ENABLED, &trans_pcie->status);
+	clear_bit(STATUS_INT_ENABLED, &trans->status);
 
 	/* disable interrupts from uCode/NIC to host */
 	iwl_write32(trans, CSR_INT_MASK, 0x00000000);
@@ -417,7 +396,7 @@ static inline void iwl_enable_interrupts(struct iwl_trans *trans)
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
 	IWL_DEBUG_ISR(trans, "Enabling interrupts\n");
-	set_bit(STATUS_INT_ENABLED, &trans_pcie->status);
+	set_bit(STATUS_INT_ENABLED, &trans->status);
 	iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask);
 }
 
@@ -479,9 +458,7 @@ static inline bool iwl_is_rfkill_set(struct iwl_trans *trans)
 
 static inline void iwl_nic_error(struct iwl_trans *trans)
 {
-	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-
-	set_bit(STATUS_FW_ERROR, &trans_pcie->status);
+	set_bit(STATUS_FW_ERROR, &trans->status);
 	iwl_op_mode_nic_error(trans->op_mode);
 }