power/reset: Add a new driver to turn QNAP board power off

The QNAP NAS boxes have a microcontroller attached to the SoCs second
serial port. By sending it a simple command, it will turn the power for
the board off. This driver registers a function for pm_power_off to send
such a command.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>

drivers/power/reset/Kconfig

@@ -13,3 +13,12 @@ config POWER_RESET_GPIO
 	  This driver supports turning off your board via a GPIO line.
 	  If your board needs a GPIO high/low to power down, say Y and
 	  create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+	bool "QNAP power-off driver"
+	depends on OF_GPIO && POWER_RESET && PLAT_ORION
+	help
+	  This driver supports turning off QNAP NAS devices by sending
+	  commands to the microcontroller which controls the main power.
+
+	  Say Y if you have a QNAP NAS.