xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Atdalīts 0
Kods Problēmas Izmaiņu pieprasījumi Darbības Pakotnes Projekti Laidieni Vikivietne Aktivitāte

sh: Remove old early serial console code V2

Pārlūkot izejas kodu 
Now when the sh-sci driver can do early serial output,
get rid of the old duplicated code. This patch is V2 and
removes support for "earlyprintk=serial" together with
the following kconfig options:
CONFIG_EARLY_SCIF_CONSOLE
CONFIG_EARLY_SCIF_CONSOLE_PORT
CONFIG_EARLY_PRINTK

With this patch applied "earlyprintk=" support is always
built-in the SuperH kernel. For this to work the serial
driver must have early platform support and in the case
of sh-sci the serial console needs to be enabled:
CONFIG_SERIAL_SH_SCI_CONSOLE=y

So after enabling the SuperH SCI console kconfig option
you also need to point out port using the kernel command
line: "earlyprintk=sh-sci.N[,baudrate][,keep]"

Remember that clocks may be disabled by the boot loader
so you may have to do some board specific static clock
setup before earlyprintk will work on your platform.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Šī revīzija ir iekļauta:
Magnus Damm
2009-12-14 12:52:53 +00:00
revīziju iesūtīja Paul Mundt
vecāks d8d3fbb024
revīzija e76fe57447
3 mainīti faili ar 1 papildinājumiem un 193 dzēšanām
Lejupielādēt ielāpa failu Lejupielādēt izmaiņu failu Izvērst visus failus Savērst visus failus

147
arch/sh/kernel/early_printk.c
Parādīt failu

@@ -15,7 +15,6 @@
#include <linux/io.h>
#include <linux/delay.h>
#ifdef CONFIG_SH_STANDARD_BIOS
#include <asm/sh_bios.h>
/*
@@ -57,140 +56,7 @@ static struct console bios_console = {
.flags = CON_PRINTBUFFER,
.index = -1,
};
#endif
#ifdef CONFIG_EARLY_SCIF_CONSOLE
#include <linux/serial_core.h>
#include "../../../drivers/serial/sh-sci.h"
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define EPK_SCSMR_VALUE 0x000
#define EPK_SCBRR_VALUE 0x00C
#define EPK_FIFO_SIZE 64
#define EPK_FIFO_BITS (0x7f00 >> 8)
#else
#define EPK_FIFO_SIZE 16
#define EPK_FIFO_BITS (0x1f00 >> 8)
#endif
static struct uart_port scif_port = {
.type = PORT_SCIF,
.mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT,
.membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT,
};
static void scif_sercon_putc(int c)
{
while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE))
;
sci_in(&scif_port, SCxSR);
sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
sci_out(&scif_port, SCxTDR, c);
while ((sci_in(&scif_port, SCxSR) & 0x40) == 0)
;
if (c == '\n')
scif_sercon_putc('\r');
}
static void scif_sercon_write(struct console *con, const char *s,
unsigned count)
{
while (count-- > 0)
scif_sercon_putc(*s++);
}
static int __init scif_sercon_setup(struct console *con, char *options)
{
con->cflag = CREAD | HUPCL | CLOCAL | B115200 | CS8;
return 0;
}
static struct console scif_console = {
.name = "sercon",
.write = scif_sercon_write,
.setup = scif_sercon_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
};
#if !defined(CONFIG_SH_STANDARD_BIOS)
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
static void scif_sercon_init(char *s)
{
sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */
sci_out(&scif_port, SCFCR, 0x4006); /* reset */
sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */
sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE);
sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE);
mdelay(1); /* wait 1-bit time */
sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */
sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */
}
#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
#define DEFAULT_BAUD 115200
/*
* Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
* devices that aren't using sh-ipl+g.
*/
static void scif_sercon_init(char *s)
{
struct uart_port *port = &scif_port;
unsigned baud = DEFAULT_BAUD;
unsigned int status;
char *e;
if (*s == ',')
++s;
if (*s) {
/* ignore ioport/device name */
s += strcspn(s, ",");
if (*s == ',')
s++;
}
if (*s) {
baud = simple_strtoul(s, &e, 0);
if (baud == 0 || s == e)
baud = DEFAULT_BAUD;
}
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
sci_out(port, SCSMR, 0);
/* Set baud rate */
sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
(32 * baud) - 1);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
sci_out(port, SCSPTR, 0);
sci_out(port, SCxSR, 0x60);
sci_out(port, SCLSR, 0);
sci_out(port, SCFCR, 0);
sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
}
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */
#endif /* CONFIG_EARLY_SCIF_CONSOLE */
/*
* Setup a default console, if more than one is compiled in, rely on the
* earlyprintk= parsing to give priority.
*/
static struct console *early_console;
static int __init setup_early_printk(char *buf)
@@ -203,21 +69,8 @@ static int __init setup_early_printk(char *buf)
if (strstr(buf, "keep"))
keep_early = 1;
#ifdef CONFIG_SH_STANDARD_BIOS
if (!strncmp(buf, "bios", 4))
early_console = &bios_console;
#endif
#if defined(CONFIG_EARLY_SCIF_CONSOLE)
if (!strncmp(buf, "serial", 6)) {
early_console = &scif_console;
#if !defined(CONFIG_SH_STANDARD_BIOS)
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
scif_sercon_init(buf + 6);
#endif
#endif
}
#endif
if (likely(early_console)) {
if (keep_early)