Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Conflict resolution of ice_virtchnl_pf.c based upon work by
Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/ice/ice_ethtool.c

@@ -2935,13 +2935,6 @@ ice_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
 	else
 		return -EINVAL;
 
-	/* Tell the OS link is going down, the link will go back up when fw
-	 * says it is ready asynchronously
-	 */
-	ice_print_link_msg(vsi, false);
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	/* Set the FC mode and only restart AN if link is up */
 	status = ice_set_fc(pi, &aq_failures, link_up);
 
@@ -3488,21 +3481,13 @@ ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
 		return -EINVAL;
 	}
 
-	/* hardware only supports an ITR granularity of 2us */
-	if (coalesce_usecs % 2 != 0) {
-		netdev_info(vsi->netdev, "Invalid value, %s-usecs must be even\n",
-			    c_type_str);
-		return -EINVAL;
-	}
-
 	if (use_adaptive_coalesce) {
 		rc->itr_setting |= ICE_ITR_DYNAMIC;
 	} else {
-		/* store user facing value how it was set */
+		/* save the user set usecs */
 		rc->itr_setting = coalesce_usecs;
-		/* set to static and convert to value HW understands */
-		rc->target_itr =
-			ITR_TO_REG(ITR_REG_ALIGN(rc->itr_setting));
+		/* device ITR granularity is in 2 usec increments */
+		rc->target_itr = ITR_REG_ALIGN(rc->itr_setting);
 	}
 
 	return 0;
@@ -3595,6 +3580,30 @@ ice_is_coalesce_param_invalid(struct net_device *netdev,
 	return 0;
 }
 
+/**
+ * ice_print_if_odd_usecs - print message if user tries to set odd [tx|rx]-usecs
+ * @netdev: netdev used for print
+ * @itr_setting: previous user setting
+ * @use_adaptive_coalesce: if adaptive coalesce is enabled or being enabled
+ * @coalesce_usecs: requested value of [tx|rx]-usecs
+ * @c_type_str: either "rx" or "tx" to match user set field of [tx|rx]-usecs
+ */
+static void
+ice_print_if_odd_usecs(struct net_device *netdev, u16 itr_setting,
+		       u32 use_adaptive_coalesce, u32 coalesce_usecs,
+		       const char *c_type_str)
+{
+	if (use_adaptive_coalesce)
+		return;
+
+	itr_setting = ITR_TO_REG(itr_setting);
+
+	if (itr_setting != coalesce_usecs && (coalesce_usecs % 2))
+		netdev_info(netdev, "User set %s-usecs to %d, device only supports even values. Rounding down and attempting to set %s-usecs to %d\n",
+			    c_type_str, coalesce_usecs, c_type_str,
+			    ITR_REG_ALIGN(coalesce_usecs));
+}
+
 /**
  * __ice_set_coalesce - set ITR/INTRL values for the device
  * @netdev: pointer to the netdev associated with this query
@@ -3615,8 +3624,19 @@ __ice_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec,
 		return -EINVAL;
 
 	if (q_num < 0) {
+		struct ice_q_vector *q_vector = vsi->q_vectors[0];
 		int v_idx;
 
+		if (q_vector) {
+			ice_print_if_odd_usecs(netdev, q_vector->rx.itr_setting,
+					       ec->use_adaptive_rx_coalesce,
+					       ec->rx_coalesce_usecs, "rx");
+
+			ice_print_if_odd_usecs(netdev, q_vector->tx.itr_setting,
+					       ec->use_adaptive_tx_coalesce,
+					       ec->tx_coalesce_usecs, "tx");
+		}
+
 		ice_for_each_q_vector(vsi, v_idx) {
 			/* In some cases if DCB is configured the num_[rx|tx]q
 			 * can be less than vsi->num_q_vectors. This check

drivers/net/ethernet/intel/ice/ice_txrx.h

@@ -222,7 +222,7 @@ enum ice_rx_dtype {
 #define ICE_ITR_GRAN_S		1	/* ITR granularity is always 2us */
 #define ICE_ITR_GRAN_US		BIT(ICE_ITR_GRAN_S)
 #define ICE_ITR_MASK		0x1FFE	/* ITR register value alignment mask */
-#define ITR_REG_ALIGN(setting)	__ALIGN_MASK(setting, ~ICE_ITR_MASK)
+#define ITR_REG_ALIGN(setting)	((setting) & ICE_ITR_MASK)
 
 #define ICE_ITR_ADAPTIVE_MIN_INC	0x0002
 #define ICE_ITR_ADAPTIVE_MIN_USECS	0x0002

drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c

@@ -1952,6 +1952,48 @@ error_param:
 				     NULL, 0);
 }
 
+/**
+ * ice_wait_on_vf_reset - poll to make sure a given VF is ready after reset
+ * @vf: The VF being resseting
+ *
+ * The max poll time is about ~800ms, which is about the maximum time it takes
+ * for a VF to be reset and/or a VF driver to be removed.
+ */
+static void ice_wait_on_vf_reset(struct ice_vf *vf)
+{
+	int i;
+
+	for (i = 0; i < ICE_MAX_VF_RESET_TRIES; i++) {
+		if (test_bit(ICE_VF_STATE_INIT, vf->vf_states))
+			break;
+		msleep(ICE_MAX_VF_RESET_SLEEP_MS);
+	}
+}
+
+/**
+ * ice_check_vf_ready_for_cfg - check if VF is ready to be configured/queried
+ * @vf: VF to check if it's ready to be configured/queried
+ *
+ * The purpose of this function is to make sure the VF is not in reset, not
+ * disabled, and initialized so it can be configured and/or queried by a host
+ * administrator.
+ */
+static int ice_check_vf_ready_for_cfg(struct ice_vf *vf)
+{
+	struct ice_pf *pf;
+
+	ice_wait_on_vf_reset(vf);
+
+	if (ice_is_vf_disabled(vf))
+		return -EINVAL;
+
+	pf = vf->pf;
+	if (ice_check_vf_init(pf, vf))
+		return -EBUSY;
+
+	return 0;
+}
+
 /**
  * ice_set_vf_spoofchk
  * @netdev: network interface device structure
@@ -1969,16 +2011,16 @@ int ice_set_vf_spoofchk(struct net_device *netdev, int vf_id, bool ena)
 	enum ice_status status;
 	struct device *dev;
 	struct ice_vf *vf;
-	int ret = 0;
+	int ret;
 
 	dev = ice_pf_to_dev(pf);
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
 	vf = &pf->vf[vf_id];
-
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
 
 	vf_vsi = pf->vsi[vf->lan_vsi_idx];
 	if (!vf_vsi) {
@@ -2792,7 +2834,7 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 	struct device *dev;
 	struct ice_vf *vf;
 	u16 vlanprio;
-	int ret = 0;
+	int ret;
 
 	dev = ice_pf_to_dev(pf);
 	if (ice_validate_vf_id(pf, vf_id))
@@ -2811,15 +2853,17 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 
 	vf = &pf->vf[vf_id];
 	vsi = pf->vsi[vf->lan_vsi_idx];
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
+
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
 
 	vlanprio = vlan_id | (qos << VLAN_PRIO_SHIFT);
 
 	if (vf->port_vlan_info == vlanprio) {
 		/* duplicate request, so just return success */
 		dev_dbg(dev, "Duplicate pvid %d request\n", vlanprio);
-		return ret;
+		return 0;
 	}
 
 	if (vlan_id || qos) {
@@ -2842,7 +2886,7 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 			return ret;
 		ret = ice_vsi_manage_pvid(vsi, 0, false);
 		if (ret)
-			goto error_manage_pvid;
+			return ret;
 	}
 
 	if (vlan_id) {
@@ -2852,7 +2896,7 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		/* add VLAN filter for the port VLAN */
 		ret = ice_vsi_add_vlan(vsi, vlan_id);
 		if (ret)
-			goto error_manage_pvid;
+			return ret;
 	}
 	/* remove old port VLAN filter with valid VLAN ID or QoS fields */
 	if (vf->port_vlan_info)
@@ -2861,8 +2905,7 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 	/* keep port VLAN information persistent on resets */
 	vf->port_vlan_info = le16_to_cpu(vsi->info.pvid);
 
-error_manage_pvid:
-	return ret;
+	return 0;
 }
 
 /**
@@ -3342,23 +3385,6 @@ ice_get_vf_cfg(struct net_device *netdev, int vf_id, struct ifla_vf_info *ivi)
 	return 0;
 }
 
-/**
- * ice_wait_on_vf_reset
- * @vf: The VF being resseting
- *
- * Poll to make sure a given VF is ready after reset
- */
-static void ice_wait_on_vf_reset(struct ice_vf *vf)
-{
-	int i;
-
-	for (i = 0; i < ICE_MAX_VF_RESET_WAIT; i++) {
-		if (test_bit(ICE_VF_STATE_INIT, vf->vf_states))
-			break;
-		msleep(20);
-	}
-}
-
 /**
  * ice_set_vf_mac
  * @netdev: network interface device structure
@@ -3371,29 +3397,21 @@ int ice_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
 	struct ice_vf *vf;
-	int ret = 0;
+	int ret;
 
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
-	vf = &pf->vf[vf_id];
-	/* Don't set MAC on disabled VF */
-	if (ice_is_vf_disabled(vf))
-		return -EINVAL;
-
-	/* In case VF is in reset mode, wait until it is completed. Depending
-	 * on factors like queue disabling routine, this could take ~250ms
-	 */
-	ice_wait_on_vf_reset(vf);
-
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
-
 	if (is_zero_ether_addr(mac) || is_multicast_ether_addr(mac)) {
 		netdev_err(netdev, "%pM not a valid unicast address\n", mac);
 		return -EINVAL;
 	}
 
+	vf = &pf->vf[vf_id];
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
+
 	/* copy MAC into dflt_lan_addr and trigger a VF reset. The reset
 	 * flow will use the updated dflt_lan_addr and add a MAC filter
 	 * using ice_add_mac. Also set pf_set_mac to indicate that the PF has
@@ -3405,7 +3423,7 @@ int ice_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		    vf_id, mac);
 
 	ice_vc_reset_vf(vf);
-	return ret;
+	return 0;
 }
 
 /**
@@ -3420,22 +3438,15 @@ int ice_set_vf_trust(struct net_device *netdev, int vf_id, bool trusted)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
 	struct ice_vf *vf;
+	int ret;
 
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
 	vf = &pf->vf[vf_id];
-	/* Don't set Trusted Mode on disabled VF */
-	if (ice_is_vf_disabled(vf))
-		return -EINVAL;
-
-	/* In case VF is in reset mode, wait until it is completed. Depending
-	 * on factors like queue disabling routine, this could take ~250ms
-	 */
-	ice_wait_on_vf_reset(vf);
-
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
 
 	/* Check if already trusted */
 	if (trusted == vf->trusted)
@@ -3461,13 +3472,15 @@ int ice_set_vf_link_state(struct net_device *netdev, int vf_id, int link_state)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
 	struct ice_vf *vf;
+	int ret;
 
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
 	vf = &pf->vf[vf_id];
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
 
 	switch (link_state) {
 	case IFLA_VF_LINK_STATE_AUTO:
@@ -3503,14 +3516,15 @@ int ice_get_vf_stats(struct net_device *netdev, int vf_id,
 	struct ice_eth_stats *stats;
 	struct ice_vsi *vsi;
 	struct ice_vf *vf;
+	int ret;
 
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
 	vf = &pf->vf[vf_id];
-
-	if (ice_check_vf_init(pf, vf))
-		return -EBUSY;
+	ret = ice_check_vf_ready_for_cfg(vf);
+	if (ret)
+		return ret;
 
 	vsi = pf->vsi[vf->lan_vsi_idx];
 	if (!vsi)

drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h

@@ -33,7 +33,8 @@
 #define ICE_MAX_POLICY_INTR_PER_VF	33
 #define ICE_MIN_INTR_PER_VF		(ICE_MIN_QS_PER_VF + 1)
 #define ICE_DFLT_INTR_PER_VF		(ICE_DFLT_QS_PER_VF + 1)
-#define ICE_MAX_VF_RESET_WAIT		15
+#define ICE_MAX_VF_RESET_TRIES		40
+#define ICE_MAX_VF_RESET_SLEEP_MS	20
 
 #define ice_for_each_vf(pf, i) \
 	for ((i) = 0; (i) < (pf)->num_alloc_vfs; (i)++)