devicetree: fix a series of wrong file references

As files got renamed, their references broke.

Manually fix a series of broken refs at the DT bindings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>

Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt

@@ -12,7 +12,7 @@ Additional documentation for F11 can be found at:
 http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
 
 Optional Touch Properties:
-Description in Documentation/devicetree/bindings/input/touch
+Description in Documentation/devicetree/bindings/input/touchscreen
 - touchscreen-inverted-x
 - touchscreen-inverted-y
 - touchscreen-swapped-x-y

Documentation/devicetree/bindings/mfd/sun6i-prcm.txt

@@ -8,7 +8,7 @@ Required properties:
  - reg: The PRCM registers range
 
 The prcm node may contain several subdevices definitions:
- - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices
  - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
    controller devices
 

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description
 HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and inherits
 common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt.
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
 
 Additional properties are described here:
 

Documentation/devicetree/bindings/pci/kirin-pcie.txt

@@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description
 Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and
 inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt.
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
 
 Additional properties are described here:
 

Documentation/devicetree/bindings/pci/pci-keystone.txt

@@ -3,9 +3,9 @@ TI Keystone PCIe interface
 Keystone PCI host Controller is based on the Synopsys DesignWare PCI
 hardware version 3.65.  It shares common functions with the PCIe DesignWare
 core driver and inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt
+Documentation/devicetree/bindings/pci/designware-pcie.txt
 
-Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt
+Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
 for the details of DesignWare DT bindings.  Additional properties are
 described here as well as properties that are not applicable.
 

Documentation/devicetree/bindings/sound/st,stm32-i2s.txt

@@ -18,7 +18,7 @@ Required properties:
     See Documentation/devicetree/bindings/dma/stm32-dma.txt.
   - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
   - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
 
 Optional properties:
   - resets: Reference to a reset controller asserting the reset controller

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

@@ -37,7 +37,7 @@ SAI subnodes required properties:
 	"tx": if sai sub-block is configured as playback DAI
 	"rx": if sai sub-block is configured as capture DAI
   - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
 
 SAI subnodes Optional properties:
   - st,sync: specify synchronization mode.