Merge tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Here are the main MIPS changes for 4.19.

  An overview of the general architecture changes:

   - Massive DMA ops refactoring from Christoph Hellwig (huzzah for
     deleting crufty code!).

   - We introduce NT_MIPS_DSP & NT_MIPS_FP_MODE ELF notes &
     corresponding regsets to expose DSP ASE & floating point mode state
     respectively, both for live debugging & core dumps.

   - We better optimize our code by hard-coding cpu_has_* macros at
     compile time where their values are known due to the ISA revision
     that the kernel build is targeting.

   - The EJTAG exception handler now better handles SMP systems, where
     it was previously possible for CPUs to clobber a register value
     saved by another CPU.

   - Our implementation of memset() gained a couple of fixes for MIPSr6
     systems to return correct values in some cases where stores fault.

   - We now implement ioremap_wc() using the uncached-accelerated cache
     coherency attribute where supported, which is detected during boot,
     and fall back to plain uncached access where necessary. The
     MIPS-specific (and unused in tree) ioremap_uncached_accelerated() &
     ioremap_cacheable_cow() are removed.

   - The prctl(PR_SET_FP_MODE, ...) syscall is better supported for SMP
     systems by reworking the way we ensure remote CPUs that may be
     running threads within the affected process switch mode.

   - Systems using the MIPS Coherence Manager will now set the
     MIPS_IC_SNOOPS_REMOTE flag to avoid some unnecessary cache
     maintenance overhead when flushing the icache.

   - A few fixes were made for building with clang/LLVM, which now
     sucessfully builds kernels for many of our platforms.

   - Miscellaneous cleanups all over.

  And some platform-specific changes:

   - ar7 gained stubs for a few clock API functions to fix build
     failures for some drivers.

   - ath79 gained support for a few new SoCs, a few fixes & better
     gpio-keys support.

   - Ci20 now exposes its SPI bus using the spi-gpio driver.

   - The generic platform can now auto-detect a suitable value for
     PHYS_OFFSET based upon the memory map described by the device tree,
     allowing us to avoid wasting memory on page book-keeping for
     systems where RAM starts at a non-zero physical address.

   - Ingenic systems using the jz4740 platform code now link their
     vmlinuz higher to allow for kernels of a realistic size.

   - Loongson32 now builds the kernel targeting MIPSr1 rather than
     MIPSr2 to avoid CPU errata.

   - Loongson64 gains a couple of fixes, a workaround for a write
     buffering issue & support for the Loongson 3A R3.1 CPU.

   - Malta now uses the piix4-poweroff driver to handle powering down.

   - Microsemi Ocelot gained support for its SPI bus & NOR flash, its
     second MDIO bus and can now be supported by a FIT/.itb image.

   - Octeon saw a bunch of header cleanups which remove a lot of
     duplicate or unused code"

* tag 'mips_4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (123 commits)
  MIPS: Remove remnants of UASM_ISA
  MIPS: netlogic: xlr: Remove erroneous check in nlm_fmn_send()
  MIPS: VDSO: Force link endianness
  MIPS: Always specify -EB or -EL when using clang
  MIPS: Use dins to simplify __write_64bit_c0_split()
  MIPS: Use read-write output operand in __write_64bit_c0_split()
  MIPS: Avoid using array as parameter to write_c0_kpgd()
  MIPS: vdso: Allow clang's --target flag in VDSO cflags
  MIPS: genvdso: Remove GOT checks
  MIPS: Remove obsolete MIPS checks for DST node "chosen@0"
  MIPS: generic: Remove input symbols from defconfig
  MIPS: Delete unused code in linux32.c
  MIPS: Remove unused sys_32_mmap2
  MIPS: Remove nabi_no_regargs
  mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123
  mips: dts: mscc: Add spi on Ocelot
  MIPS: Loongson: Merge load addresses
  MIPS: Loongson: Set Loongson32 to MIPS32R1
  MIPS: mscc: ocelot: add interrupt controller properties to GPIO controller
  MIPS: generic: Select MIPS_AUTO_PFN_OFFSET
  ...

Documentation/devicetree/bindings/phy/phy-ath79-usb.txt

@@ -3,7 +3,7 @@
 Required properties:
 - compatible: "qca,ar7100-usb-phy"
 - #phys-cells: should be 0
-- reset-names: "usb-phy"[, "usb-suspend-override"]
+- reset-names: "phy"[, "suspend-override"]
 - resets: references to the reset controllers
 
 Example:
@@ -11,7 +11,7 @@ Example:
 	usb-phy {
 		compatible = "qca,ar7100-usb-phy";
 
-		reset-names = "usb-phy", "usb-suspend-override";
+		reset-names = "phy", "suspend-override";
 		resets = <&rst 4>, <&rst 3>;
 
 		#phy-cells = <0>;

arch/mips/Kconfig

@@ -16,6 +16,7 @@ config MIPS
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select CPU_PM if CPU_IDLE
+	select DMA_DIRECT_OPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
@@ -97,6 +98,7 @@ config MIPS_GENERIC
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
 	select LIBFDT
+	select MIPS_AUTO_PFN_OFFSET
 	select MIPS_CPU_SCACHE
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
@@ -193,6 +195,7 @@ config ATH79
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select GPIOLIB
+	select PINCTRL
 	select HAVE_CLK
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
@@ -211,6 +214,8 @@ config ATH79
 
 config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
+	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -438,7 +443,6 @@ config MACH_LOONGSON32
 
 config MACH_LOONGSON64
 	bool "Loongson-2/3 family of machines"
-	select ARCH_HAS_PHYS_TO_DMA
 	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables the support of Loongson-2/3 family of machines.
@@ -662,11 +666,11 @@ config SGI_IP22
 
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select DMA_COHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -721,6 +725,7 @@ config SGI_IP28
 
 config SGI_IP32
 	bool "SGI IP32 (O2)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC32
 	select BOOT_ELF32
@@ -743,7 +748,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -753,7 +757,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -763,7 +766,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -774,7 +776,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -784,7 +785,6 @@ config SIBYTE_RHONE
 config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -797,7 +797,6 @@ config SIBYTE_SWARM
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -809,7 +808,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -819,7 +817,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -895,8 +892,8 @@ config CAVIUM_OCTEON_SOC
 	bool "Cavium Networks Octeon SoC based boards"
 	select CEVT_R4K
 	select ARCH_HAS_PHYS_TO_DMA
+	select HAS_RAPIDIO
 	select PHYS_ADDR_T_64BIT
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
@@ -945,7 +942,6 @@ config NLM_XLR_BOARD
 	select PHYS_ADDR_T_64BIT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -973,7 +969,6 @@ config NLM_XLP_BOARD
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -992,7 +987,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1118,12 +1112,14 @@ config DMA_PERDEV_COHERENT
 	bool
 	select DMA_MAYBE_COHERENT
 
-config DMA_COHERENT
-	bool
-
 config DMA_NONCOHERENT
 	bool
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select NEED_DMA_MAP_STATE
+	select DMA_NONCOHERENT_MMAP
+	select DMA_NONCOHERENT_CACHE_SYNC
+	select DMA_NONCOHERENT_OPS
 
 config SYS_HAS_EARLY_PRINTK
 	bool
@@ -1365,6 +1361,7 @@ choice
 config CPU_LOONGSON3
 	bool "Loongson 3 CPU"
 	depends on SYS_HAS_CPU_LOONGSON3
+	select ARCH_HAS_PHYS_TO_DMA
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
@@ -1427,7 +1424,8 @@ config CPU_LOONGSON1B
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
-	  release 2 instruction set.
+	  Release 1 instruction set and part of the MIPS32 Release 2
+	  instruction set.
 
 config CPU_LOONGSON1C
 	bool "Loongson 1C"
@@ -1436,7 +1434,8 @@ config CPU_LOONGSON1C
 	select LEDS_GPIO_REGISTER
 	help
 	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
-	  release 2 instruction set.
+	  Release 1 instruction set and part of the MIPS32 Release 2
+	  instruction set.
 
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
@@ -1831,11 +1830,12 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
 	select CPU_MIPS32
-	select CPU_MIPSR2
+	select CPU_MIPSR1
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1979,12 +1979,6 @@ config SYS_HAS_CPU_XLR
 config SYS_HAS_CPU_XLP
 	bool
 
-config MIPS_MALTA_PM
-	depends on MIPS_MALTA
-	depends on PCI
-	bool
-	default y
-
 #
 # CPU may reorder R->R, R->W, W->R, W->W
 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
@@ -2994,6 +2988,9 @@ config PGTABLE_LEVELS
 	default 3 if 64BIT && !PAGE_SIZE_64KB
 	default 2
 
+config MIPS_AUTO_PFN_OFFSET
+	bool
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -3115,10 +3112,13 @@ config ZONE_DMA32
 
 source "drivers/pcmcia/Kconfig"
 
+config HAS_RAPIDIO
+	bool
+	default n
+
 config RAPIDIO
 	tristate "RapidIO support"
-	depends on PCI
+	depends on HAS_RAPIDIO || PCI
-	default n
 	help
 	  If you say Y here, the kernel will include drivers and
 	  infrastructure code to support RapidIO interconnect devices.

arch/mips/Makefile

@@ -122,12 +122,22 @@ cflags-y += -ffreestanding
 # are used, so we kludge that here.  A bug has been filed at
 # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
 #
+# clang doesn't suffer from these issues and our checks against -dumpmachine
+# don't work so well when cross compiling, since without providing --target
+# clang's output will be based upon the build machine. So for clang we simply
+# unconditionally specify -EB or -EL as appropriate.
+#
+ifeq ($(cc-name),clang)
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -EB
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -EL
+else
 undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__
 undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__
 predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__
 predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
+endif
 
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
@@ -155,15 +165,11 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
-			-Wa,-mips32 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-			-Wa,-mips32r2 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
-cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
-			-Wa,-mips64 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-			-Wa,-mips64r2 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R6)	+= -march=mips64r6 -Wa,--trap
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \

arch/mips/alchemy/board-gpr.c

@@ -34,6 +34,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <prom.h>
@@ -60,7 +61,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/board-mtx1.c

@@ -31,6 +31,7 @@
 #include <mtd/mtd-abi.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
@@ -58,7 +59,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/board-xxs1500.c

@@ -29,6 +29,7 @@
 #include <linux/pm.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
@@ -55,7 +56,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
 }

arch/mips/alchemy/devboards/platform.c

@@ -14,6 +14,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
@@ -36,7 +37,7 @@ void __init prom_init(void)
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
-void prom_putchar(unsigned char c)
+void prom_putchar(char c)
 {
 	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1300)
 		alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);

arch/mips/ar7/clock.c

@@ -476,3 +476,32 @@ void __init ar7_init_clocks(void)
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
 }
+
+/* dummy functions, should not be called */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ON(clk);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	WARN_ON(clk);
+	return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);

arch/mips/ar7/prom.c

@@ -25,6 +25,7 @@
 #include <linux/string.h>
 #include <linux/io.h>
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include <asm/mach-ar7/ar7.h>
 #include <asm/mach-ar7/prom.h>
@@ -259,10 +260,9 @@ static inline void serial_out(int offset, int value)
 	writel(value, (void *)PORT(offset));
 }
 
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
 		;
 	serial_out(UART_TX, c);
-	return 1;
 }

arch/mips/ath25/Kconfig

@@ -12,6 +12,7 @@ config SOC_AR2315
 config PCI_AR2315
 	bool "Atheros AR2315 PCI controller support"
 	depends on SOC_AR2315
+	select ARCH_HAS_PHYS_TO_DMA
 	select HW_HAS_PCI
 	select PCI
 	default y

arch/mips/ath25/board.c

@@ -146,10 +146,10 @@ int __init ath25_find_config(phys_addr_t base, unsigned long size)
 			pr_info("Fixing up empty mac addresses\n");
 			config->reset_config_gpio = 0xffff;
 			config->sys_led_gpio = 0xffff;
-			random_ether_addr(config->wlan0_mac);
+			eth_random_addr(config->wlan0_mac);
 			config->wlan0_mac[0] &= ~0x06;
-			random_ether_addr(config->enet0_mac);
+			eth_random_addr(config->enet0_mac);
-			random_ether_addr(config->enet1_mac);
+			eth_random_addr(config->enet1_mac);
 		}
 	}
 

arch/mips/ath25/early_printk.c

@@ -9,6 +9,7 @@
 #include <linux/mm.h>
 #include <linux/io.h>
 #include <linux/serial_reg.h>
+#include <asm/setup.h>
 
 #include "devices.h"
 #include "ar2315_regs.h"
@@ -25,7 +26,7 @@ static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
 	return __raw_readl(base + 4 * reg);
 }
 
-void prom_putchar(unsigned char ch)
+void prom_putchar(char ch)
 {
 	static void __iomem *base;
 
@@ -38,7 +39,7 @@ void prom_putchar(unsigned char ch)
 
 	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
 		;
-	prom_uart_wr(base, UART_TX, ch);
+	prom_uart_wr(base, UART_TX, (unsigned char)ch);
 	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
 		;
 }

arch/mips/ath79/clock.c

@@ -355,6 +355,91 @@ static void __init ar934x_clocks_init(void)
 	iounmap(dpll_base);
 }
 
+static void __init qca953x_clocks_init(void)
+{
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
+	u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
+	u32 cpu_pll, ddr_pll;
+	u32 bootstrap;
+
+	bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
+	if (bootstrap &	QCA953X_BOOTSTRAP_REF_CLK_40)
+		ref_rate = 40 * 1000 * 1000;
+	else
+		ref_rate = 25 * 1000 * 1000;
+
+	pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
+	out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		  QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		  QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
+	nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
+	       QCA953X_PLL_CPU_CONFIG_NINT_MASK;
+	frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
+	       QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
+
+	cpu_pll = nint * ref_rate / ref_div;
+	cpu_pll += frac * (ref_rate >> 6) / ref_div;
+	cpu_pll /= (1 << out_div);
+
+	pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
+	out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+		  QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+		  QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
+	nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
+	       QCA953X_PLL_DDR_CONFIG_NINT_MASK;
+	frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
+	       QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
+
+	ddr_pll = nint * ref_rate / ref_div;
+	ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
+	ddr_pll /= (1 << out_div);
+
+	clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
+
+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+		  QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+		cpu_rate = ref_rate;
+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
+		cpu_rate = cpu_pll / (postdiv + 1);
+	else
+		cpu_rate = ddr_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+		  QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+		ddr_rate = ref_rate;
+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
+		ddr_rate = ddr_pll / (postdiv + 1);
+	else
+		ddr_rate = cpu_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+		  QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+		ahb_rate = ref_rate;
+	else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+		ahb_rate = ddr_pll / (postdiv + 1);
+	else
+		ahb_rate = cpu_pll / (postdiv + 1);
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
+}
+
 static void __init qca955x_clocks_init(void)
 {
 	unsigned long ref_rate;
@@ -440,6 +525,110 @@ static void __init qca955x_clocks_init(void)
 	clk_add_alias("uart", NULL, "ref", NULL);
 }
 
+static void __init qca956x_clocks_init(void)
+{
+	unsigned long ref_rate;
+	unsigned long cpu_rate;
+	unsigned long ddr_rate;
+	unsigned long ahb_rate;
+	u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
+	u32 cpu_pll, ddr_pll;
+	u32 bootstrap;
+
+	/*
+	 * QCA956x timer init workaround has to be applied right before setting
+	 * up the clock. Else, there will be no jiffies
+	 */
+	u32 misc;
+
+	misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
+	misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
+	ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
+
+	bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
+	if (bootstrap &	QCA956X_BOOTSTRAP_REF_CLK_40)
+		ref_rate = 40 * 1000 * 1000;
+	else
+		ref_rate = 25 * 1000 * 1000;
+
+	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
+	out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
+		  QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
+		  QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
+
+	pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
+	nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
+	       QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
+	hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
+	       QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
+	lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
+	       QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
+
+	cpu_pll = nint * ref_rate / ref_div;
+	cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
+	cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
+	cpu_pll /= (1 << out_div);
+
+	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
+	out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
+		  QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
+	ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
+		  QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
+	pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
+	nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
+	       QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
+	hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
+	       QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
+	lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
+	       QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
+
+	ddr_pll = nint * ref_rate / ref_div;
+	ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
+	ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
+	ddr_pll /= (1 << out_div);
+
+	clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
+
+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
+		  QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
+		cpu_rate = ref_rate;
+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
+		cpu_rate = ddr_pll / (postdiv + 1);
+	else
+		cpu_rate = cpu_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
+		  QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
+		ddr_rate = ref_rate;
+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
+		ddr_rate = cpu_pll / (postdiv + 1);
+	else
+		ddr_rate = ddr_pll / (postdiv + 1);
+
+	postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
+		  QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
+
+	if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
+		ahb_rate = ref_rate;
+	else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
+		ahb_rate = ddr_pll / (postdiv + 1);
+	else
+		ahb_rate = cpu_pll / (postdiv + 1);
+
+	ath79_add_sys_clkdev("ref", ref_rate);
+	ath79_add_sys_clkdev("cpu", cpu_rate);
+	ath79_add_sys_clkdev("ddr", ddr_rate);
+	ath79_add_sys_clkdev("ahb", ahb_rate);
+
+	clk_add_alias("wdt", NULL, "ref", NULL);
+	clk_add_alias("uart", NULL, "ref", NULL);
+}
+
 void __init ath79_clocks_init(void)
 {
 	if (soc_is_ar71xx())
@@ -450,8 +639,12 @@ void __init ath79_clocks_init(void)
 		ar933x_clocks_init();
 	else if (soc_is_ar934x())
 		ar934x_clocks_init();
+	else if (soc_is_qca953x())
+		qca953x_clocks_init();
 	else if (soc_is_qca955x())
 		qca955x_clocks_init();
+	else if (soc_is_qca956x() || soc_is_tp9343())
+		qca956x_clocks_init();
 	else
 		BUG();
 }

arch/mips/ath79/common.c

@@ -103,8 +103,12 @@ void ath79_device_reset_set(u32 mask)
 		reg = AR933X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar934x())
 		reg = AR934X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca953x())
+		reg = QCA953X_RESET_REG_RESET_MODULE;
 	else if (soc_is_qca955x())
 		reg = QCA955X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca956x() || soc_is_tp9343())
+		reg = QCA956X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 
@@ -131,8 +135,12 @@ void ath79_device_reset_clear(u32 mask)
 		reg = AR933X_RESET_REG_RESET_MODULE;
 	else if (soc_is_ar934x())
 		reg = AR934X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca953x())
+		reg = QCA953X_RESET_REG_RESET_MODULE;
 	else if (soc_is_qca955x())
 		reg = QCA955X_RESET_REG_RESET_MODULE;
+	else if (soc_is_qca956x() || soc_is_tp9343())
+		reg = QCA956X_RESET_REG_RESET_MODULE;
 	else
 		BUG();
 

arch/mips/ath79/early_printk.c

@@ -13,12 +13,13 @@
 #include <linux/errno.h>
 #include <linux/serial_reg.h>
 #include <asm/addrspace.h>
+#include <asm/setup.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ar933x_uart.h>
 
-static void (*_prom_putchar) (unsigned char);
+static void (*_prom_putchar)(char);
 
 static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
 {
@@ -33,31 +34,72 @@ static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-static void prom_putchar_ar71xx(unsigned char ch)
+static void prom_putchar_ar71xx(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
 
 	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
-	__raw_writel(ch, base + UART_TX * 4);
+	__raw_writel((unsigned char)ch, base + UART_TX * 4);
 	prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
 }
 
-static void prom_putchar_ar933x(unsigned char ch)
+static void prom_putchar_ar933x(char ch)
 {
 	void __iomem *base = (void __iomem *)(KSEG1ADDR(AR933X_UART_BASE));
 
 	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
 			  AR933X_UART_DATA_TX_CSR);
-	__raw_writel(AR933X_UART_DATA_TX_CSR | ch, base + AR933X_UART_DATA_REG);
+	__raw_writel(AR933X_UART_DATA_TX_CSR | (unsigned char)ch,
+		     base + AR933X_UART_DATA_REG);
 	prom_putchar_wait(base + AR933X_UART_DATA_REG, AR933X_UART_DATA_TX_CSR,
 			  AR933X_UART_DATA_TX_CSR);
 }
 
-static void prom_putchar_dummy(unsigned char ch)
+static void prom_putchar_dummy(char ch)
 {
 	/* nothing to do */
 }
 
+static void prom_enable_uart(u32 id)
+{
+	void __iomem *gpio_base;
+	u32 uart_en;
+	u32 t;
+
+	switch (id) {
+	case REV_ID_MAJOR_AR71XX:
+		uart_en = AR71XX_GPIO_FUNC_UART_EN;
+		break;
+
+	case REV_ID_MAJOR_AR7240:
+	case REV_ID_MAJOR_AR7241:
+	case REV_ID_MAJOR_AR7242:
+		uart_en = AR724X_GPIO_FUNC_UART_EN;
+		break;
+
+	case REV_ID_MAJOR_AR913X:
+		uart_en = AR913X_GPIO_FUNC_UART_EN;
+		break;
+
+	case REV_ID_MAJOR_AR9330:
+	case REV_ID_MAJOR_AR9331:
+		uart_en = AR933X_GPIO_FUNC_UART_EN;
+		break;
+
+	case REV_ID_MAJOR_AR9341:
+	case REV_ID_MAJOR_AR9342:
+	case REV_ID_MAJOR_AR9344:
+		/* TODO */
+	default:
+		return;
+	}
+
+	gpio_base = (void __iomem *)KSEG1ADDR(AR71XX_GPIO_BASE);
+	t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
+	t |= uart_en;
+	__raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
+}
+
 static void prom_putchar_init(void)
 {
 	void __iomem *base;
@@ -76,8 +118,12 @@ static void prom_putchar_init(void)
 	case REV_ID_MAJOR_AR9341:
 	case REV_ID_MAJOR_AR9342:
 	case REV_ID_MAJOR_AR9344:
+	case REV_ID_MAJOR_QCA9533:
+	case REV_ID_MAJOR_QCA9533_V2:
 	case REV_ID_MAJOR_QCA9556:
 	case REV_ID_MAJOR_QCA9558:
+	case REV_ID_MAJOR_TP9343:
+	case REV_ID_MAJOR_QCA956X:
 		_prom_putchar = prom_putchar_ar71xx;
 		break;
 
@@ -88,11 +134,13 @@ static void prom_putchar_init(void)
 
 	default:
 		_prom_putchar = prom_putchar_dummy;
-		break;
+		return;
 	}
+
+	prom_enable_uart(id);
 }
 
-void prom_putchar(unsigned char ch)
+void prom_putchar(char ch)
 {
 	if (!_prom_putchar)
 		prom_putchar_init();

arch/mips/ath79/setup.c

@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
 static void ath79_restart(char *command)
 {
+	local_irq_disable();
 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
 	for (;;)
 		if (cpu_wait)
@@ -59,6 +60,7 @@ static void __init ath79_detect_sys_type(void)
 	u32 major;
 	u32 minor;
 	u32 rev = 0;
+	u32 ver = 1;
 
 	id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
 	major = id & REV_ID_MAJOR_MASK;
@@ -151,6 +153,17 @@ static void __init ath79_detect_sys_type(void)
 		rev = id & AR934X_REV_ID_REVISION_MASK;
 		break;
 
+	case REV_ID_MAJOR_QCA9533_V2:
+		ver = 2;
+		ath79_soc_rev = 2;
+		/* drop through */
+
+	case REV_ID_MAJOR_QCA9533:
+		ath79_soc = ATH79_SOC_QCA9533;
+		chip = "9533";
+		rev = id & QCA953X_REV_ID_REVISION_MASK;
+		break;
+
 	case REV_ID_MAJOR_QCA9556:
 		ath79_soc = ATH79_SOC_QCA9556;
 		chip = "9556";
@@ -163,14 +176,30 @@ static void __init ath79_detect_sys_type(void)
 		rev = id & QCA955X_REV_ID_REVISION_MASK;
 		break;
 
+	case REV_ID_MAJOR_QCA956X:
+		ath79_soc = ATH79_SOC_QCA956X;
+		chip = "956X";
+		rev = id & QCA956X_REV_ID_REVISION_MASK;
+		break;
+
+	case REV_ID_MAJOR_TP9343:
+		ath79_soc = ATH79_SOC_TP9343;
+		chip = "9343";
+		rev = id & QCA956X_REV_ID_REVISION_MASK;
+		break;
+
 	default:
 		panic("ath79: unknown SoC, id:0x%08x", id);
 	}
 
-	ath79_soc_rev = rev;
+	if (ver == 1)
+		ath79_soc_rev = rev;
 
-	if (soc_is_qca955x())
+	if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
-		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+		sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
+			chip, ver, rev);
+	else if (soc_is_tp9343())
+		sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
 			chip, rev);
 	else
 		sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);

arch/mips/bcm63xx/early_printk.c

@@ -8,6 +8,7 @@
 
 #include <bcm63xx_io.h>
 #include <linux/serial_bcm63xx.h>
+#include <asm/setup.h>
 
 static void wait_xfered(void)
 {

arch/mips/bmips/dma.c

@@ -17,7 +17,7 @@
 #include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <dma-coherence.h>
+#include <asm/bmips.h>
 
 /*
  * BCM338x has configurable address translation windows which allow the
@@ -40,7 +40,7 @@ static struct bmips_dma_range *bmips_dma_ranges;
 
 #define FLUSH_RAC		0x100
 
-static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t pa)
 {
 	struct bmips_dma_range *r;
 
@@ -52,17 +52,7 @@ static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
 	return pa;
 }
 
-dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	return bmips_phys_to_dma(dev, virt_to_phys(addr));
-}
-
-dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return bmips_phys_to_dma(dev, page_to_phys(page));
-}
-
-unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
 {
 	struct bmips_dma_range *r;
 
@@ -74,6 +64,22 @@ unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr;
 }
 
+void arch_sync_dma_for_cpu_all(struct device *dev)
+{
+	void __iomem *cbr = BMIPS_GET_CBR();
+	u32 cfg;
+
+	if (boot_cpu_type() != CPU_BMIPS3300 &&
+	    boot_cpu_type() != CPU_BMIPS4350 &&
+	    boot_cpu_type() != CPU_BMIPS4380)
+		return;
+
+	/* Flush stale data out of the readahead cache */
+	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
+	__raw_readl(cbr + BMIPS_RAC_CONFIG);
+}
+
 static int __init bmips_init_dma_ranges(void)
 {
 	struct device_node *np =

arch/mips/bmips/setup.c

@@ -202,13 +202,6 @@ void __init device_tree_init(void)
 	of_node_put(np);
 }
 
-int __init plat_of_setup(void)
-{
-	return __dt_register_buses("simple-bus", NULL);
-}
-
-arch_initcall(plat_of_setup);
-
 static int __init plat_dev_init(void)
 {
 	of_clk_init(NULL);

arch/mips/boot/Makefile

@@ -105,28 +105,29 @@ $(obj)/uImage: $(obj)/uImage.$(suffix-y)
 # Flattened Image Tree (.itb) images
 #
 
-targets += vmlinux.itb
-targets += vmlinux.gz.itb
-targets += vmlinux.bz2.itb
-targets += vmlinux.lzma.itb
-targets += vmlinux.lzo.itb
-
 ifeq ($(ADDR_BITS),32)
-	itb_addr_cells = 1
+itb_addr_cells = 1
 endif
 ifeq ($(ADDR_BITS),64)
-	itb_addr_cells = 2
+itb_addr_cells = 2
 endif
 
-quiet_cmd_its_cat = CAT     $@
+targets += vmlinux.its.S
-      cmd_its_cat = cat $^ >$@
 
-$(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS))
+quiet_cmd_its_cat = CAT     $@
+      cmd_its_cat = cat $(filter-out $(PHONY), $^) >$@
+
+$(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS)) FORCE
 	$(call if_changed,its_cat)
 
+targets += vmlinux.its
+targets += vmlinux.gz.its
+targets += vmlinux.bz2.its
+targets += vmlinux.lzmo.its
+targets += vmlinux.lzo.its
+
 quiet_cmd_cpp_its_S = ITS     $@
-      cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+      cmd_cpp_its_S = $(CPP) -P -C -o $@ $< \
-			-D__ASSEMBLY__ \
 		        -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
 			-DVMLINUX_BINARY="\"$(3)\"" \
 			-DVMLINUX_COMPRESSION="\"$(2)\"" \
@@ -136,19 +137,25 @@ quiet_cmd_cpp_its_S = ITS     $@
 			-DADDR_CELLS=$(itb_addr_cells)
 
 $(obj)/vmlinux.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
-	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+	$(call if_changed,cpp_its_S,none,vmlinux.bin)
 
 $(obj)/vmlinux.gz.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
-	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+	$(call if_changed,cpp_its_S,gzip,vmlinux.bin.gz)
 
 $(obj)/vmlinux.bz2.its: $(obj)/vmlinux.its.S $(VMLINUX)  FORCE
-	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+	$(call if_changed,cpp_its_S,bzip2,vmlinux.bin.bz2)
 
 $(obj)/vmlinux.lzma.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
-	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+	$(call if_changed,cpp_its_S,lzma,vmlinux.bin.lzma)
 
 $(obj)/vmlinux.lzo.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
-	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+	$(call if_changed,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
 
 quiet_cmd_itb-image = ITB     $@
       cmd_itb-image = \
@@ -162,14 +169,5 @@ quiet_cmd_itb-image = ITB     $@
 $(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
 	$(call if_changed,itb-image,$<)
 
-$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+$(obj)/vmlinux.%.itb: $(obj)/vmlinux.%.its $(obj)/vmlinux.bin.% FORCE
-	$(call if_changed,itb-image,$<)
-
-$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
-	$(call if_changed,itb-image,$<)
-
-$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
-	$(call if_changed,itb-image,$<)
-
-$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
 	$(call if_changed,itb-image,$<)

arch/mips/boot/compressed/uart-prom.c

@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
-
+#include <asm/setup.h>
-extern void prom_putchar(unsigned char ch);
 
 void putc(char c)
 {

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -155,6 +155,25 @@
 		};
 	};
 
+	spi_gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		num-chipselects = <2>;
+
+		gpio-miso = <&gpe 14 0>;
+		gpio-sck = <&gpe 15 0>;
+		gpio-mosi = <&gpe 17 0>;
+		cs-gpios = <&gpe 16 0
+			    &gpe 18 0>;
+
+		spidev@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+		};
+	};
+
 	uart0: serial@10030000 {
 		compatible = "ingenic,jz4780-uart";
 		reg = <0x10030000 0x100>;

arch/mips/boot/dts/mscc/Makefile

@@ -1,3 +1,3 @@
-dtb-$(CONFIG_LEGACY_BOARD_OCELOT)	+= ocelot_pcb123.dtb
+dtb-$(CONFIG_MSCC_OCELOT)	+= ocelot_pcb123.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .o, $(dtb-y))

arch/mips/boot/dts/mscc/ocelot.dtsi

@@ -91,6 +91,17 @@
 			status = "disabled";
 		};
 
+		spi: spi@101000 {
+			compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x101000 0x100>, <0x3c 0x18>;
+			interrupts = <9>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
 		switch@1010000 {
 			compatible = "mscc,vsc7514-switch";
 			reg = <0x1010000 0x10000>,
@@ -168,6 +179,9 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&gpio 0 0 22>;
+			interrupt-controller;
+			interrupts = <13>;
+			#interrupt-cells = <2>;
 
 			uart_pins: uart-pins {
 				pins = "GPIO_6", "GPIO_7";
@@ -178,13 +192,18 @@
 				pins = "GPIO_12", "GPIO_13";
 				function = "uart2";
 			};
+
+			miim1: miim1 {
+				pins = "GPIO_14", "GPIO_15";
+				function = "miim1";
+			};
 		};
 
 		mdio0: mdio@107009c {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "mscc,ocelot-miim";
-			reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+			reg = <0x107009c 0x24>, <0x10700f0 0x8>;
 			interrupts = <14>;
 			status = "disabled";
 
@@ -201,5 +220,16 @@
 				reg = <3>;
 			};
 		};
+
+		mdio1: mdio@10700c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mscc,ocelot-miim";
+			reg = <0x10700c0 0x24>;
+			interrupts = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&miim1>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/mscc/ocelot_pcb123.dts

@@ -26,6 +26,16 @@
 	status = "okay";
 };
 
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "macronix,mx25l25635f", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
 &mdio0 {
 	status = "okay";
 };

arch/mips/boot/dts/qca/ar9132.dtsi

@@ -161,7 +161,7 @@
 	usb_phy: usb-phy {
 		compatible = "qca,ar7100-usb-phy";
 
-		reset-names = "usb-phy", "usb-suspend-override";
+		reset-names = "phy", "suspend-override";
 		resets = <&rst 4>, <&rst 3>;
 
 		#phy-cells = <0>;

arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts

@@ -22,11 +22,10 @@
 	};
 
 	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		poll-interval = <20>;
 		button@0 {
 			label = "reset";
 			linux,code = <KEY_RESTART>;

arch/mips/boot/dts/qca/ar9331.dtsi

@@ -146,7 +146,7 @@
 	usb_phy: usb-phy {
 		compatible = "qca,ar7100-usb-phy";
 
-		reset-names = "usb-phy", "usb-suspend-override";
+		reset-names = "phy", "suspend-override";
 		resets = <&rst 4>, <&rst 3>;
 
 		#phy-cells = <0>;

arch/mips/boot/dts/qca/ar9331_dpt_module.dts

@@ -29,11 +29,10 @@
 		};
 	};
 
-	gpio-keys-polled {
+	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <100>;
 
 		button@0 {
 			label = "reset";

arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts

@@ -47,11 +47,10 @@
 		};
 	};
 
-	gpio-keys-polled {
+	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <100>;
 
 		button@0 {
 			label = "jumpstart";

arch/mips/boot/dts/qca/ar9331_omega.dts

@@ -29,11 +29,10 @@
 		};
 	};
 
-	gpio-keys-polled {
+	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <100>;
 
 		button@0 {
 			label = "reset";

arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts

@@ -47,11 +47,10 @@
 		};
 	};
 
-	gpio-keys-polled {
+	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		poll-interval = <100>;
 
 		button@0 {
 			label = "wps";

arch/mips/boot/ecoff.h

@@ -2,14 +2,17 @@
 /*
  * Some ECOFF definitions.
  */
+
+#include <stdint.h>
+
 typedef struct filehdr {
-	unsigned short	f_magic;	/* magic number */
+	uint16_t	f_magic;	/* magic number */
-	unsigned short	f_nscns;	/* number of sections */
+	uint16_t	f_nscns;	/* number of sections */
-	long		f_timdat;	/* time & date stamp */
+	int32_t		f_timdat;	/* time & date stamp */
-	long		f_symptr;	/* file pointer to symbolic header */
+	int32_t		f_symptr;	/* file pointer to symbolic header */
-	long		f_nsyms;	/* sizeof(symbolic hdr) */
+	int32_t		f_nsyms;	/* sizeof(symbolic hdr) */
-	unsigned short	f_opthdr;	/* sizeof(optional hdr) */
+	uint16_t	f_opthdr;	/* sizeof(optional hdr) */
-	unsigned short	f_flags;	/* flags */
+	uint16_t	f_flags;	/* flags */
 } FILHDR;
 #define FILHSZ	sizeof(FILHDR)
 
@@ -18,32 +21,32 @@ typedef struct filehdr {
 
 typedef struct scnhdr {
 	char		s_name[8];	/* section name */
-	long		s_paddr;	/* physical address, aliased s_nlib */
+	int32_t		s_paddr;	/* physical address, aliased s_nlib */
-	long		s_vaddr;	/* virtual address */
+	int32_t		s_vaddr;	/* virtual address */
-	long		s_size;		/* section size */
+	int32_t		s_size;		/* section size */
-	long		s_scnptr;	/* file ptr to raw data for section */
+	int32_t		s_scnptr;	/* file ptr to raw data for section */
-	long		s_relptr;	/* file ptr to relocation */
+	int32_t		s_relptr;	/* file ptr to relocation */
-	long		s_lnnoptr;	/* file ptr to gp histogram */
+	int32_t		s_lnnoptr;	/* file ptr to gp histogram */
-	unsigned short	s_nreloc;	/* number of relocation entries */
+	uint16_t	s_nreloc;	/* number of relocation entries */
-	unsigned short	s_nlnno;	/* number of gp histogram entries */
+	uint16_t	s_nlnno;	/* number of gp histogram entries */
-	long		s_flags;	/* flags */
+	int32_t		s_flags;	/* flags */
 } SCNHDR;
 #define SCNHSZ		sizeof(SCNHDR)
-#define SCNROUND	((long)16)
+#define SCNROUND	((int32_t)16)
 
 typedef struct aouthdr {
-	short	magic;		/* see above				*/
+	int16_t	magic;		/* see above				*/
-	short	vstamp;		/* version stamp			*/
+	int16_t	vstamp;		/* version stamp			*/
-	long	tsize;		/* text size in bytes, padded to DW bdry*/
+	int32_t	tsize;		/* text size in bytes, padded to DW bdry*/
-	long	dsize;		/* initialized data "  "		*/
+	int32_t	dsize;		/* initialized data "  "		*/
-	long	bsize;		/* uninitialized data "	  "		*/
+	int32_t	bsize;		/* uninitialized data "	  "		*/
-	long	entry;		/* entry pt.				*/
+	int32_t	entry;		/* entry pt.				*/
-	long	text_start;	/* base of text used for this file	*/
+	int32_t	text_start;	/* base of text used for this file	*/
-	long	data_start;	/* base of data used for this file	*/
+	int32_t	data_start;	/* base of data used for this file	*/
-	long	bss_start;	/* base of bss used for this file	*/
+	int32_t	bss_start;	/* base of bss used for this file	*/
-	long	gprmask;	/* general purpose register mask	*/
+	int32_t	gprmask;	/* general purpose register mask	*/
-	long	cprmask[4];	/* co-processor register masks		*/
+	int32_t	cprmask[4];	/* co-processor register masks		*/
-	long	gp_value;	/* the gp value used for this object	*/
+	int32_t	gp_value;	/* the gp value used for this object	*/
 } AOUTHDR;
 #define AOUTHSZ sizeof(AOUTHDR)
 

arch/mips/boot/elf2ecoff.c

@@ -43,6 +43,8 @@
 #include <limits.h>
 #include <netinet/in.h>
 #include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
 
 #include "ecoff.h"
 
@@ -55,8 +57,8 @@
 /* -------------------------------------------------------------------- */
 
 struct sect {
-	unsigned long vaddr;
+	uint32_t vaddr;
-	unsigned long len;
+	uint32_t len;
 };
 
 int *symTypeTable;
@@ -153,16 +155,16 @@ static char *saveRead(int file, off_t offset, off_t len, char *name)
 }
 
 #define swab16(x) \
-	((unsigned short)( \
+	((uint16_t)( \
-		(((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \
+		(((uint16_t)(x) & (uint16_t)0x00ffU) << 8) | \
-		(((unsigned short)(x) & (unsigned short)0xff00U) >> 8) ))
+		(((uint16_t)(x) & (uint16_t)0xff00U) >> 8) ))
 
 #define swab32(x) \
 	((unsigned int)( \
-		(((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \
+		(((uint32_t)(x) & (uint32_t)0x000000ffUL) << 24) | \
-		(((unsigned int)(x) & (unsigned int)0x0000ff00UL) <<  8) | \
+		(((uint32_t)(x) & (uint32_t)0x0000ff00UL) <<  8) | \
-		(((unsigned int)(x) & (unsigned int)0x00ff0000UL) >>  8) | \
+		(((uint32_t)(x) & (uint32_t)0x00ff0000UL) >>  8) | \
-		(((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) ))
+		(((uint32_t)(x) & (uint32_t)0xff000000UL) >> 24) ))
 
 static void convert_elf_hdr(Elf32_Ehdr * e)
 {
@@ -274,7 +276,7 @@ int main(int argc, char *argv[])
 	struct aouthdr eah;
 	struct scnhdr esecs[6];
 	int infile, outfile;
-	unsigned long cur_vma = ULONG_MAX;
+	uint32_t cur_vma = UINT32_MAX;
 	int addflag = 0;
 	int nosecs;
 
@@ -518,7 +520,7 @@ int main(int argc, char *argv[])
 
 		for (i = 0; i < nosecs; i++) {
 			printf
-			    ("Section %d: %s phys %lx  size %lx	 file offset %lx\n",
+			    ("Section %d: %s phys %"PRIx32"  size %"PRIx32"\t file offset %"PRIx32"\n",
 			     i, esecs[i].s_name, esecs[i].s_paddr,
 			     esecs[i].s_size, esecs[i].s_scnptr);
 		}
@@ -564,17 +566,16 @@ int main(int argc, char *argv[])
 		   the section can be loaded before copying. */
 		if (ph[i].p_type == PT_LOAD && ph[i].p_filesz) {
 			if (cur_vma != ph[i].p_vaddr) {
-				unsigned long gap =
+				uint32_t gap = ph[i].p_vaddr - cur_vma;
-				    ph[i].p_vaddr - cur_vma;
 				char obuf[1024];
 				if (gap > 65536) {
 					fprintf(stderr,
-						"Intersegment gap (%ld bytes) too large.\n",
+						"Intersegment gap (%"PRId32" bytes) too large.\n",
 						gap);
 					exit(1);
 				}
 				fprintf(stderr,
-					"Warning: %ld byte intersegment gap.\n",
+					"Warning: %d byte intersegment gap.\n",
 					gap);
 				memset(obuf, 0, sizeof obuf);
 				while (gap) {

arch/mips/cavium-octeon/dma-octeon.c

@@ -11,9 +11,7 @@
  * Copyright (C) 2010 Cavium Networks, Inc.
  */
 #include <linux/dma-direct.h>
-#include <linux/scatterlist.h>
 #include <linux/bootmem.h>
-#include <linux/export.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
 #include <linux/init.h>
@@ -24,10 +22,16 @@
 #include <asm/octeon/octeon.h>
 
 #ifdef CONFIG_PCI
+#include <linux/pci.h>
 #include <asm/octeon/pci-octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
 
+struct octeon_dma_map_ops {
+	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
+	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
+};
+
 static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
 {
 	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
@@ -61,6 +65,11 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_gen1_ops = {
+	.phys_to_dma	= octeon_gen1_phys_to_dma,
+	.dma_to_phys	= octeon_gen1_dma_to_phys,
+};
+
 static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	return octeon_hole_phys_to_dma(paddr);
@@ -71,6 +80,11 @@ static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return octeon_hole_dma_to_phys(daddr);
 }
 
+static const struct octeon_dma_map_ops octeon_gen2_ops = {
+	.phys_to_dma	= octeon_gen2_phys_to_dma,
+	.dma_to_phys	= octeon_gen2_dma_to_phys,
+};
+
 static dma_addr_t octeon_big_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
@@ -93,6 +107,11 @@ static phys_addr_t octeon_big_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_big_ops = {
+	.phys_to_dma	= octeon_big_phys_to_dma,
+	.dma_to_phys	= octeon_big_dma_to_phys,
+};
+
 static dma_addr_t octeon_small_phys_to_dma(struct device *dev,
 					   phys_addr_t paddr)
 {
@@ -121,105 +140,51 @@ static phys_addr_t octeon_small_dma_to_phys(struct device *dev,
 	return daddr;
 }
 
-#endif /* CONFIG_PCI */
+static const struct octeon_dma_map_ops octeon_small_ops = {
-
+	.phys_to_dma	= octeon_small_phys_to_dma,
-static dma_addr_t octeon_dma_map_page(struct device *dev, struct page *page,
+	.dma_to_phys	= octeon_small_dma_to_phys,
-	unsigned long offset, size_t size, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
-					    direction, attrs);
-	mb();
-
-	return daddr;
-}
-
-static int octeon_dma_map_sg(struct device *dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction, unsigned long attrs)
-{
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, direction, attrs);
-	mb();
-	return r;
-}
-
-static void octeon_dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	swiotlb_sync_single_for_device(dev, dma_handle, size, direction);
-	mb();
-}
-
-static void octeon_dma_sync_sg_for_device(struct device *dev,
-	struct scatterlist *sg, int nelems, enum dma_data_direction direction)
-{
-	swiotlb_sync_sg_for_device(dev, sg, nelems, direction);
-	mb();
-}
-
-static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
-
-	mb();
-
-	return ret;
-}
-
-static dma_addr_t octeon_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr;
-}
-
-static phys_addr_t octeon_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	return daddr;
-}
-
-struct octeon_dma_map_ops {
-	const struct dma_map_ops dma_map_ops;
-	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
-	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
 };
 
+static const struct octeon_dma_map_ops *octeon_pci_dma_ops;
+
+void __init octeon_pci_dma_init(void)
+{
+	switch (octeon_dma_bar_type) {
+	case OCTEON_DMA_BAR_TYPE_PCIE:
+		octeon_pci_dma_ops = &octeon_gen1_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_PCIE2:
+		octeon_pci_dma_ops = &octeon_gen2_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_BIG:
+		octeon_pci_dma_ops = &octeon_big_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_SMALL:
+		octeon_pci_dma_ops = &octeon_small_ops;
+		break;
+	default:
+		BUG();
+	}
+}
+#endif /* CONFIG_PCI */
+
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
+#ifdef CONFIG_PCI
-						      struct octeon_dma_map_ops,
+	if (dev && dev_is_pci(dev))
-						      dma_map_ops);
+		return octeon_pci_dma_ops->phys_to_dma(dev, paddr);
-
+#endif
-	return ops->phys_to_dma(dev, paddr);
+	return paddr;
 }
-EXPORT_SYMBOL(__phys_to_dma);
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
+#ifdef CONFIG_PCI
-						      struct octeon_dma_map_ops,
+	if (dev && dev_is_pci(dev))
-						      dma_map_ops);
+		return octeon_pci_dma_ops->dma_to_phys(dev, daddr);
-
+#endif
-	return ops->dma_to_phys(dev, daddr);
+	return daddr;
 }
-EXPORT_SYMBOL(__dma_to_phys);
-
-static struct octeon_dma_map_ops octeon_linear_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-	.phys_to_dma = octeon_unity_phys_to_dma,
-	.dma_to_phys = octeon_unity_dma_to_phys
-};
 
 char *octeon_swiotlb;
 
@@ -283,52 +248,4 @@ void __init plat_swiotlb_setup(void)
 
 	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
 		panic("Cannot allocate SWIOTLB buffer");
-
-	mips_dma_map_ops = &octeon_linear_dma_map_ops.dma_map_ops;
 }
-
-#ifdef CONFIG_PCI
-static struct octeon_dma_map_ops _octeon_pci_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-};
-
-const struct dma_map_ops *octeon_pci_dma_map_ops;
-
-void __init octeon_pci_dma_init(void)
-{
-	switch (octeon_dma_bar_type) {
-	case OCTEON_DMA_BAR_TYPE_PCIE2:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen2_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen2_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_PCIE:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen1_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen1_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_BIG:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_big_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_big_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_SMALL:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_small_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_small_dma_to_phys;
-		break;
-	default:
-		BUG();
-	}
-	octeon_pci_dma_map_ops = &_octeon_pci_dma_map_ops.dma_map_ops;
-}
-#endif /* CONFIG_PCI */

arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2008 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -42,9 +42,6 @@
 #include <asm/octeon/cvmx-asxx-defs.h>
 #include <asm/octeon/cvmx-dbg-defs.h>
 
-void __cvmx_interrupt_gmxx_enable(int interface);
-void __cvmx_interrupt_asxx_enable(int block);
-
 /**
  * Probe RGMII ports and determine the number present
  *

arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2008 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -39,10 +39,7 @@
 
 #include <asm/octeon/cvmx-gmxx-defs.h>
 #include <asm/octeon/cvmx-pcsx-defs.h>
-
+#include <asm/octeon/cvmx-pcsxx-defs.h>
-void __cvmx_interrupt_gmxx_enable(int interface);
-void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
-void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
 
 /**
  * Perform initialization required only once for an SGMII port.

arch/mips/cavium-octeon/executive/cvmx-helper-spi.c

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2008 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -25,10 +25,6 @@
  * Contact Cavium Networks for more information
  ***********************license end**************************************/
 
-void __cvmx_interrupt_gmxx_enable(int interface);
-void __cvmx_interrupt_spxx_int_msk_enable(int index);
-void __cvmx_interrupt_stxx_int_msk_enable(int index);
-
 /*
  * Functions for SPI initialization, configuration,
  * and monitoring.
@@ -41,6 +37,8 @@ void __cvmx_interrupt_stxx_int_msk_enable(int index);
 
 #include <asm/octeon/cvmx-pip-defs.h>
 #include <asm/octeon/cvmx-pko-defs.h>
+#include <asm/octeon/cvmx-spxx-defs.h>
+#include <asm/octeon/cvmx-stxx-defs.h>
 
 /*
  * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI

arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2008 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -39,12 +39,9 @@
 
 #include <asm/octeon/cvmx-pko-defs.h>
 #include <asm/octeon/cvmx-gmxx-defs.h>
+#include <asm/octeon/cvmx-pcsx-defs.h>
 #include <asm/octeon/cvmx-pcsxx-defs.h>
 
-void __cvmx_interrupt_gmxx_enable(int interface);
-void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
-void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
-
 int __cvmx_helper_xaui_enumerate(int interface)
 {
 	union cvmx_gmxx_hg2_control gmx_hg2_control;

arch/mips/cavium-octeon/octeon-irq.c

@@ -814,7 +814,7 @@ static int octeon_irq_ciu_set_affinity(struct irq_data *data,
 			pen = &per_cpu(octeon_irq_ciu1_en_mirror, cpu);
 
 		if (cpumask_test_cpu(cpu, dest) && enable_one) {
-			enable_one = 0;
+			enable_one = false;
 			__set_bit(cd->bit, pen);
 		} else {
 			__clear_bit(cd->bit, pen);

arch/mips/cavium-octeon/octeon-platform.c

@@ -322,6 +322,7 @@ static int __init octeon_ehci_device_init(void)
 		return 0;
 
 	pd = of_find_device_by_node(ehci_node);
+	of_node_put(ehci_node);
 	if (!pd)
 		return 0;
 
@@ -384,6 +385,7 @@ static int __init octeon_ohci_device_init(void)
 		return 0;
 
 	pd = of_find_device_by_node(ohci_node);
+	of_node_put(ohci_node);
 	if (!pd)
 		return 0;
 
@@ -1067,6 +1069,6 @@ end_led:
 
 static int __init octeon_publish_devices(void)
 {
-	return of_platform_bus_probe(NULL, octeon_ids, NULL);
+	return of_platform_populate(NULL, octeon_ids, NULL, NULL);
 }
 arch_initcall(octeon_publish_devices);

arch/mips/cavium-octeon/setup.c

@@ -36,6 +36,7 @@
 #include <asm/mipsregs.h>
 #include <asm/bootinfo.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
@@ -1108,7 +1109,7 @@ void __init plat_mem_setup(void)
  * Emit one character to the boot UART.	 Exported for use by the
  * watchdog timer.
  */
-int prom_putchar(char c)
+void prom_putchar(char c)
 {
 	uint64_t lsrval;
 
@@ -1119,7 +1120,6 @@ int prom_putchar(char c)
 
 	/* Write the byte */
 	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
-	return 1;
 }
 EXPORT_SYMBOL(prom_putchar);
 
@@ -1154,11 +1154,7 @@ void __init prom_free_prom_memory(void)
 }
 
 void __init octeon_fill_mac_addresses(void);
-int octeon_prune_device_tree(void);
 
-extern const char __appended_dtb;
-extern const char __dtb_octeon_3xxx_begin;
-extern const char __dtb_octeon_68xx_begin;
 void __init device_tree_init(void)
 {
 	const void *fdt;

arch/mips/configs/ci20_defconfig

@@ -92,6 +92,8 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_JZ4780=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_INGENIC=y
 # CONFIG_HWMON is not set

arch/mips/configs/generic_defconfig

@@ -43,9 +43,6 @@ CONFIG_NETFILTER=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_SCSI=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HWMON is not set

arch/mips/configs/malta_defconfig

@@ -317,6 +317,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/malta_kvm_defconfig

@@ -328,6 +328,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/malta_kvm_guest_defconfig

@@ -330,6 +330,7 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/malta_qemu_32r6_defconfig

@@ -133,6 +133,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/maltaaprp_defconfig

@@ -133,6 +133,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/maltasmvp_defconfig

@@ -134,6 +134,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/maltasmvp_eva_defconfig

@@ -137,6 +137,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/maltaup_defconfig

@@ -132,6 +132,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/configs/maltaup_xpa_defconfig

@@ -326,6 +326,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_PIIX4_POWEROFF=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y

arch/mips/fw/arc/arc_con.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/fs.h>
+#include <asm/setup.h>
 #include <asm/sgialib.h>
 
 static void prom_console_write(struct console *co, const char *s,

arch/mips/fw/arc/promlib.c

@@ -9,6 +9,7 @@
 #include <linux/kernel.h>
 #include <asm/sgialib.h>
 #include <asm/bcache.h>
+#include <asm/setup.h>
 
 /*
  * IP22 boardcache is not compatible with board caches.	 Thus we disable it

arch/mips/fw/sni/sniprom.c

@@ -19,6 +19,7 @@
 #include <asm/mipsprom.h>
 #include <asm/mipsregs.h>
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 /* special SNI prom calls */
 /*

arch/mips/generic/Kconfig

@@ -35,13 +35,13 @@ config LEGACY_BOARD_OCELOT
 	depends on LEGACY_BOARD_SEAD3=n
 	select LEGACY_BOARDS
 	select MSCC_OCELOT
+	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
 
 config MSCC_OCELOT
 	bool
 	select GPIOLIB
 	select MSCC_OCELOT_IRQ
-	select SYS_HAS_EARLY_PRINTK
-	select USE_GENERIC_EARLY_PRINTK_8250
 
 comment "FIT/UHI Boards"
 
@@ -65,6 +65,14 @@ config FIT_IMAGE_FDT_XILFPGA
 	  Enable this to include the FDT for the MIPSfpga platform
 	  from Imagination Technologies in the FIT kernel image.
 
+config FIT_IMAGE_FDT_OCELOT_PCB123
+	bool "Include FDT for Microsemi Ocelot PCB123"
+	select MSCC_OCELOT
+	help
+	  Enable this to include the FDT for the Ocelot PCB123 platform
+	  from Microsemi in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config VIRT_BOARD_RANCHU
 	bool "Support Ranchu platform for Android emulator"
 	help

arch/mips/generic/Platform

@@ -16,4 +16,5 @@ all-$(CONFIG_MIPS_GENERIC)	:= vmlinux.gz.itb
 its-y					:= vmlinux.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_BOSTON)	+= board-boston.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_NI169445)	+= board-ni169445.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_OCELOT_PCB123) += board-ocelot_pcb123.its.S
 its-$(CONFIG_FIT_IMAGE_FDT_XILFPGA)	+= board-xilfpga.its.S

arch/mips/generic/board-ocelot_pcb123.its.S

@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt@ocelot_pcb123 {
+			description = "MSCC Ocelot PCB123 Device Tree";
+			data = /incbin/("boot/dts/mscc/ocelot_pcb123.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		conf@ocelot_pcb123 {
+			description = "Ocelot Linux kernel";
+			kernel = "kernel@0";
+			fdt = "fdt@ocelot_pcb123";
+		};
+	};
+};

arch/mips/generic/init.c

@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/irqchip.h>
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 
 #include <asm/bootinfo.h>
 #include <asm/fw/fw.h>
@@ -204,22 +203,11 @@ void __init arch_init_irq(void)
 					    "mti,cpu-interrupt-controller");
 	if (!cpu_has_veic && !intc_node)
 		mips_cpu_irq_init();
+	of_node_put(intc_node);
 
 	irqchip_init();
 }
 
-static int __init publish_devices(void)
-{
-	if (!of_have_populated_dt())
-		panic("Device-tree not present");
-
-	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
-		panic("Failed to populate DT");
-
-	return 0;
-}
-arch_initcall(publish_devices);
-
 void __init prom_free_prom_memory(void)
 {
 }

arch/mips/generic/yamon-dt.c

@@ -27,8 +27,6 @@ __init int yamon_dt_append_cmdline(void *fdt)
 
 	/* find or add chosen node */
 	chosen_off = fdt_path_offset(fdt, "/chosen");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_path_offset(fdt, "/chosen@0");
 	if (chosen_off == -FDT_ERR_NOTFOUND)
 		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
 	if (chosen_off < 0) {
@@ -220,8 +218,6 @@ __init int yamon_dt_serial_config(void *fdt)
 
 	/* find or add chosen node */
 	chosen_off = fdt_path_offset(fdt, "/chosen");
-	if (chosen_off == -FDT_ERR_NOTFOUND)
-		chosen_off = fdt_path_offset(fdt, "/chosen@0");
 	if (chosen_off == -FDT_ERR_NOTFOUND)
 		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
 	if (chosen_off < 0) {

arch/mips/include/asm/Kbuild

@@ -8,6 +8,7 @@ generic-y += irq_work.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
+generic-y += msi.h
 generic-y += parport.h
 generic-y += percpu.h
 generic-y += preempt.h

arch/mips/include/asm/atomic.h

@@ -22,6 +22,17 @@
 #include <asm/cmpxchg.h>
 #include <asm/war.h>
 
+/*
+ * Using a branch-likely instruction to check the result of an sc instruction
+ * works around a bug present in R10000 CPUs prior to revision 3.0 that could
+ * cause ll-sc sequences to execute non-atomically.
+ */
+#if R10000_LLSC_WAR
+# define __scbeqz "beqzl"
+#else
+# define __scbeqz "beqz"
+#endif
+
 #define ATOMIC_INIT(i)	  { (i) }
 
 /*
@@ -44,31 +55,18 @@
 #define ATOMIC_OP(op, c_op, asm_op)					      \
 static __inline__ void atomic_##op(int i, atomic_t * v)			      \
 {									      \
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
+	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%0, %1		# atomic_" #op "	\n"   \
 		"	" #asm_op " %0, %2				\n"   \
 		"	sc	%0, %1					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)	      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		int temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	ll	%0, %1		# atomic_" #op "\n"   \
-			"	" #asm_op " %0, %2			\n"   \
-			"	sc	%0, %1				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)  \
-			: "Ir" (i));					      \
-		} while (unlikely(!temp));				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -83,36 +81,20 @@ static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v)	      \
 {									      \
 	int result;							      \
 									      \
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
+	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%1, %2		# atomic_" #op "_return	\n"   \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	sc	%0, %2					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		int temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	ll	%1, %2	# atomic_" #op "_return	\n"   \
-			"	" #asm_op " %0, %1, %3			\n"   \
-			"	sc	%0, %2				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (result), "=&r" (temp),			      \
-			  "+" GCC_OFF_SMALL_ASM() (v->counter)		      \
-			: "Ir" (i));					      \
-		} while (unlikely(!result));				      \
-									      \
-		result = temp; result c_op i;				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -131,36 +113,20 @@ static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v)	      \
 {									      \
 	int result;							      \
 									      \
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
+	if (kernel_uses_llsc) {						      \
 		int temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	ll	%1, %2		# atomic_fetch_" #op "	\n"   \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	sc	%0, %2					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	move	%0, %1					\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		int temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	ll	%1, %2	# atomic_fetch_" #op "	\n"   \
-			"	" #asm_op " %0, %1, %3			\n"   \
-			"	sc	%0, %2				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (result), "=&r" (temp),			      \
-			  "+" GCC_OFF_SMALL_ASM() (v->counter)		      \
-			: "Ir" (i));					      \
-		} while (unlikely(!result));				      \
-									      \
-		result = temp;						      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -218,38 +184,17 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 
 	smp_mb__before_llsc();
 
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc) {
-		int temp;
-
-		__asm__ __volatile__(
-		"	.set	arch=r4000				\n"
-		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
-		"	subu	%0, %1, %3				\n"
-		"	bltz	%0, 1f					\n"
-		"	sc	%0, %2					\n"
-		"	.set	noreorder				\n"
-		"	beqzl	%0, 1b					\n"
-		"	 subu	%0, %1, %3				\n"
-		"	.set	reorder					\n"
-		"1:							\n"
-		"	.set	mips0					\n"
-		: "=&r" (result), "=&r" (temp),
-		  "+" GCC_OFF_SMALL_ASM() (v->counter)
-		: "Ir" (i), GCC_OFF_SMALL_ASM() (v->counter)
-		: "memory");
-	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
 		"	.set	"MIPS_ISA_LEVEL"			\n"
 		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
 		"	subu	%0, %1, %3				\n"
+		"	move	%1, %0					\n"
 		"	bltz	%0, 1f					\n"
-		"	sc	%0, %2					\n"
+		"	sc	%1, %2					\n"
-		"	.set	noreorder				\n"
+		"\t" __scbeqz "	%1, 1b					\n"
-		"	beqz	%0, 1b					\n"
-		"	 subu	%0, %1, %3				\n"
-		"	.set	reorder					\n"
 		"1:							\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp),
@@ -301,31 +246,18 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 #define ATOMIC64_OP(op, c_op, asm_op)					      \
 static __inline__ void atomic64_##op(long i, atomic64_t * v)		      \
 {									      \
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
+	if (kernel_uses_llsc) {						      \
 		long temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%0, %1		# atomic64_" #op "	\n"   \
 		"	" #asm_op " %0, %2				\n"   \
 		"	scd	%0, %1					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)	      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		long temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	lld	%0, %1		# atomic64_" #op "\n" \
-			"	" #asm_op " %0, %2			\n"   \
-			"	scd	%0, %1				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter)      \
-			: "Ir" (i));					      \
-		} while (unlikely(!temp));				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -340,37 +272,20 @@ static __inline__ long atomic64_##op##_return_relaxed(long i, atomic64_t * v) \
 {									      \
 	long result;							      \
 									      \
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {			      \
+	if (kernel_uses_llsc) {						      \
 		long temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%1, %2		# atomic64_" #op "_return\n"  \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	scd	%0, %2					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		long temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	lld	%1, %2	# atomic64_" #op "_return\n"  \
-			"	" #asm_op " %0, %1, %3			\n"   \
-			"	scd	%0, %2				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (result), "=&r" (temp),			      \
-			  "=" GCC_OFF_SMALL_ASM() (v->counter)		      \
-			: "Ir" (i), GCC_OFF_SMALL_ASM() (v->counter)	      \
-			: "memory");					      \
-		} while (unlikely(!result));				      \
-									      \
-		result = temp; result c_op i;				      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -393,33 +308,16 @@ static __inline__ long atomic64_fetch_##op##_relaxed(long i, atomic64_t * v)  \
 		long temp;						      \
 									      \
 		__asm__ __volatile__(					      \
-		"	.set	arch=r4000				\n"   \
+		"	.set	"MIPS_ISA_LEVEL"			\n"   \
 		"1:	lld	%1, %2		# atomic64_fetch_" #op "\n"   \
 		"	" #asm_op " %0, %1, %3				\n"   \
 		"	scd	%0, %2					\n"   \
-		"	beqzl	%0, 1b					\n"   \
+		"\t" __scbeqz "	%0, 1b					\n"   \
 		"	move	%0, %1					\n"   \
 		"	.set	mips0					\n"   \
 		: "=&r" (result), "=&r" (temp),				      \
 		  "+" GCC_OFF_SMALL_ASM() (v->counter)			      \
 		: "Ir" (i));						      \
-	} else if (kernel_uses_llsc) {					      \
-		long temp;						      \
-									      \
-		do {							      \
-			__asm__ __volatile__(				      \
-			"	.set	"MIPS_ISA_LEVEL"		\n"   \
-			"	lld	%1, %2	# atomic64_fetch_" #op "\n"   \
-			"	" #asm_op " %0, %1, %3			\n"   \
-			"	scd	%0, %2				\n"   \
-			"	.set	mips0				\n"   \
-			: "=&r" (result), "=&r" (temp),			      \
-			  "=" GCC_OFF_SMALL_ASM() (v->counter)		      \
-			: "Ir" (i), GCC_OFF_SMALL_ASM() (v->counter)	      \
-			: "memory");					      \
-		} while (unlikely(!result));				      \
-									      \
-		result = temp;						      \
 	} else {							      \
 		unsigned long flags;					      \
 									      \
@@ -478,38 +376,17 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 
 	smp_mb__before_llsc();
 
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc) {
-		long temp;
-
-		__asm__ __volatile__(
-		"	.set	arch=r4000				\n"
-		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
-		"	dsubu	%0, %1, %3				\n"
-		"	bltz	%0, 1f					\n"
-		"	scd	%0, %2					\n"
-		"	.set	noreorder				\n"
-		"	beqzl	%0, 1b					\n"
-		"	 dsubu	%0, %1, %3				\n"
-		"	.set	reorder					\n"
-		"1:							\n"
-		"	.set	mips0					\n"
-		: "=&r" (result), "=&r" (temp),
-		  "=" GCC_OFF_SMALL_ASM() (v->counter)
-		: "Ir" (i), GCC_OFF_SMALL_ASM() (v->counter)
-		: "memory");
-	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
 		"	.set	"MIPS_ISA_LEVEL"			\n"
 		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
 		"	dsubu	%0, %1, %3				\n"
+		"	move	%1, %0					\n"
 		"	bltz	%0, 1f					\n"
-		"	scd	%0, %2					\n"
+		"	scd	%1, %2					\n"
-		"	.set	noreorder				\n"
+		"\t" __scbeqz "	%1, 1b					\n"
-		"	beqz	%0, 1b					\n"
-		"	 dsubu	%0, %1, %3				\n"
-		"	.set	reorder					\n"
 		"1:							\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp),

arch/mips/include/asm/bmips.h

@@ -123,22 +123,6 @@ static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 	barrier();
 }
 
-static inline void bmips_post_dma_flush(struct device *dev)
-{
-	void __iomem *cbr = BMIPS_GET_CBR();
-	u32 cfg;
-
-	if (boot_cpu_type() != CPU_BMIPS3300 &&
-	    boot_cpu_type() != CPU_BMIPS4350 &&
-	    boot_cpu_type() != CPU_BMIPS4380)
-		return;
-
-	/* Flush stale data out of the readahead cache */
-	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
-	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
-	__raw_readl(cbr + BMIPS_RAC_CONFIG);
-}
-
 #endif /* !defined(__ASSEMBLY__) */
 
 #endif /* _ASM_BMIPS_H */

arch/mips/include/asm/cpu-features.h

@@ -14,39 +14,77 @@
 #include <asm/isa-rev.h>
 #include <cpu-feature-overrides.h>
 
+#define __ase(ase)			(cpu_data[0].ases & (ase))
+#define __opt(opt)			(cpu_data[0].options & (opt))
+
+/*
+ * Check if MIPS_ISA_REV is >= isa *and* an option or ASE is detected during
+ * boot (typically by cpu_probe()).
+ *
+ * Note that these should only be used in cases where a kernel built for an
+ * older ISA *cannot* run on a CPU which supports the feature in question. For
+ * example this may be used for features introduced with MIPSr6, since a kernel
+ * built for an older ISA cannot run on a MIPSr6 CPU. This should not be used
+ * for MIPSr2 features however, since a MIPSr1 or earlier kernel might run on a
+ * MIPSr2 CPU.
+ */
+#define __isa_ge_and_ase(isa, ase)	((MIPS_ISA_REV >= (isa)) && __ase(ase))
+#define __isa_ge_and_opt(isa, opt)	((MIPS_ISA_REV >= (isa)) && __opt(opt))
+
+/*
+ * Check if MIPS_ISA_REV is >= isa *or* an option or ASE is detected during
+ * boot (typically by cpu_probe()).
+ *
+ * These are for use with features that are optional up until a particular ISA
+ * revision & then become required.
+ */
+#define __isa_ge_or_ase(isa, ase)	((MIPS_ISA_REV >= (isa)) || __ase(ase))
+#define __isa_ge_or_opt(isa, opt)	((MIPS_ISA_REV >= (isa)) || __opt(opt))
+
+/*
+ * Check if MIPS_ISA_REV is < isa *and* an option or ASE is detected during
+ * boot (typically by cpu_probe()).
+ *
+ * These are for use with features that are optional up until a particular ISA
+ * revision & are then removed - ie. no longer present in any CPU implementing
+ * the given ISA revision.
+ */
+#define __isa_lt_and_ase(isa, ase)	((MIPS_ISA_REV < (isa)) && __ase(ase))
+#define __isa_lt_and_opt(isa, opt)	((MIPS_ISA_REV < (isa)) && __opt(opt))
+
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.
  */
 #ifndef cpu_has_tlb
-#define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
+#define cpu_has_tlb		__opt(MIPS_CPU_TLB)
 #endif
 #ifndef cpu_has_ftlb
-#define cpu_has_ftlb		(cpu_data[0].options & MIPS_CPU_FTLB)
+#define cpu_has_ftlb		__opt(MIPS_CPU_FTLB)
 #endif
 #ifndef cpu_has_tlbinv
-#define cpu_has_tlbinv		(cpu_data[0].options & MIPS_CPU_TLBINV)
+#define cpu_has_tlbinv		__opt(MIPS_CPU_TLBINV)
 #endif
 #ifndef cpu_has_segments
-#define cpu_has_segments	(cpu_data[0].options & MIPS_CPU_SEGMENTS)
+#define cpu_has_segments	__opt(MIPS_CPU_SEGMENTS)
 #endif
 #ifndef cpu_has_eva
-#define cpu_has_eva		(cpu_data[0].options & MIPS_CPU_EVA)
+#define cpu_has_eva		__opt(MIPS_CPU_EVA)
 #endif
 #ifndef cpu_has_htw
-#define cpu_has_htw		(cpu_data[0].options & MIPS_CPU_HTW)
+#define cpu_has_htw		__opt(MIPS_CPU_HTW)
 #endif
 #ifndef cpu_has_ldpte
-#define cpu_has_ldpte		(cpu_data[0].options & MIPS_CPU_LDPTE)
+#define cpu_has_ldpte		__opt(MIPS_CPU_LDPTE)
 #endif
 #ifndef cpu_has_rixiex
-#define cpu_has_rixiex		(cpu_data[0].options & MIPS_CPU_RIXIEX)
+#define cpu_has_rixiex		__isa_ge_or_opt(6, MIPS_CPU_RIXIEX)
 #endif
 #ifndef cpu_has_maar
-#define cpu_has_maar		(cpu_data[0].options & MIPS_CPU_MAAR)
+#define cpu_has_maar		__opt(MIPS_CPU_MAAR)
 #endif
 #ifndef cpu_has_rw_llb
-#define cpu_has_rw_llb		(cpu_data[0].options & MIPS_CPU_RW_LLB)
+#define cpu_has_rw_llb		__isa_ge_or_opt(6, MIPS_CPU_RW_LLB)
 #endif
 
 /*
@@ -59,18 +97,18 @@
 #define cpu_has_3kex		(!cpu_has_4kex)
 #endif
 #ifndef cpu_has_4kex
-#define cpu_has_4kex		(cpu_data[0].options & MIPS_CPU_4KEX)
+#define cpu_has_4kex		__isa_ge_or_opt(1, MIPS_CPU_4KEX)
 #endif
 #ifndef cpu_has_3k_cache
-#define cpu_has_3k_cache	(cpu_data[0].options & MIPS_CPU_3K_CACHE)
+#define cpu_has_3k_cache	__isa_lt_and_opt(1, MIPS_CPU_3K_CACHE)
 #endif
 #define cpu_has_6k_cache	0
 #define cpu_has_8k_cache	0
 #ifndef cpu_has_4k_cache
-#define cpu_has_4k_cache	(cpu_data[0].options & MIPS_CPU_4K_CACHE)
+#define cpu_has_4k_cache	__isa_ge_or_opt(1, MIPS_CPU_4K_CACHE)
 #endif
 #ifndef cpu_has_tx39_cache
-#define cpu_has_tx39_cache	(cpu_data[0].options & MIPS_CPU_TX39_CACHE)
+#define cpu_has_tx39_cache	__opt(MIPS_CPU_TX39_CACHE)
 #endif
 #ifndef cpu_has_octeon_cache
 #define cpu_has_octeon_cache	0
@@ -83,92 +121,92 @@
 #define raw_cpu_has_fpu		cpu_has_fpu
 #endif
 #ifndef cpu_has_32fpr
-#define cpu_has_32fpr		(cpu_data[0].options & MIPS_CPU_32FPR)
+#define cpu_has_32fpr		__isa_ge_or_opt(1, MIPS_CPU_32FPR)
 #endif
 #ifndef cpu_has_counter
-#define cpu_has_counter		(cpu_data[0].options & MIPS_CPU_COUNTER)
+#define cpu_has_counter		__opt(MIPS_CPU_COUNTER)
 #endif
 #ifndef cpu_has_watch
-#define cpu_has_watch		(cpu_data[0].options & MIPS_CPU_WATCH)
+#define cpu_has_watch		__opt(MIPS_CPU_WATCH)
 #endif
 #ifndef cpu_has_divec
-#define cpu_has_divec		(cpu_data[0].options & MIPS_CPU_DIVEC)
+#define cpu_has_divec		__isa_ge_or_opt(1, MIPS_CPU_DIVEC)
 #endif
 #ifndef cpu_has_vce
-#define cpu_has_vce		(cpu_data[0].options & MIPS_CPU_VCE)
+#define cpu_has_vce		__opt(MIPS_CPU_VCE)
 #endif
 #ifndef cpu_has_cache_cdex_p
-#define cpu_has_cache_cdex_p	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_P)
+#define cpu_has_cache_cdex_p	__opt(MIPS_CPU_CACHE_CDEX_P)
 #endif
 #ifndef cpu_has_cache_cdex_s
-#define cpu_has_cache_cdex_s	(cpu_data[0].options & MIPS_CPU_CACHE_CDEX_S)
+#define cpu_has_cache_cdex_s	__opt(MIPS_CPU_CACHE_CDEX_S)
 #endif
 #ifndef cpu_has_prefetch
-#define cpu_has_prefetch	(cpu_data[0].options & MIPS_CPU_PREFETCH)
+#define cpu_has_prefetch	__isa_ge_or_opt(1, MIPS_CPU_PREFETCH)
 #endif
 #ifndef cpu_has_mcheck
-#define cpu_has_mcheck		(cpu_data[0].options & MIPS_CPU_MCHECK)
+#define cpu_has_mcheck		__isa_ge_or_opt(1, MIPS_CPU_MCHECK)
 #endif
 #ifndef cpu_has_ejtag
-#define cpu_has_ejtag		(cpu_data[0].options & MIPS_CPU_EJTAG)
+#define cpu_has_ejtag		__opt(MIPS_CPU_EJTAG)
 #endif
 #ifndef cpu_has_llsc
-#define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
+#define cpu_has_llsc		__isa_ge_or_opt(1, MIPS_CPU_LLSC)
 #endif
 #ifndef cpu_has_bp_ghist
-#define cpu_has_bp_ghist	(cpu_data[0].options & MIPS_CPU_BP_GHIST)
+#define cpu_has_bp_ghist	__opt(MIPS_CPU_BP_GHIST)
 #endif
 #ifndef kernel_uses_llsc
 #define kernel_uses_llsc	cpu_has_llsc
 #endif
 #ifndef cpu_has_guestctl0ext
-#define cpu_has_guestctl0ext	(cpu_data[0].options & MIPS_CPU_GUESTCTL0EXT)
+#define cpu_has_guestctl0ext	__opt(MIPS_CPU_GUESTCTL0EXT)
 #endif
 #ifndef cpu_has_guestctl1
-#define cpu_has_guestctl1	(cpu_data[0].options & MIPS_CPU_GUESTCTL1)
+#define cpu_has_guestctl1	__opt(MIPS_CPU_GUESTCTL1)
 #endif
 #ifndef cpu_has_guestctl2
-#define cpu_has_guestctl2	(cpu_data[0].options & MIPS_CPU_GUESTCTL2)
+#define cpu_has_guestctl2	__opt(MIPS_CPU_GUESTCTL2)
 #endif
 #ifndef cpu_has_guestid
-#define cpu_has_guestid		(cpu_data[0].options & MIPS_CPU_GUESTID)
+#define cpu_has_guestid		__opt(MIPS_CPU_GUESTID)
 #endif
 #ifndef cpu_has_drg
-#define cpu_has_drg		(cpu_data[0].options & MIPS_CPU_DRG)
+#define cpu_has_drg		__opt(MIPS_CPU_DRG)
 #endif
 #ifndef cpu_has_mips16
-#define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
+#define cpu_has_mips16		__isa_lt_and_ase(6, MIPS_ASE_MIPS16)
 #endif
 #ifndef cpu_has_mips16e2
-#define cpu_has_mips16e2	(cpu_data[0].ases & MIPS_ASE_MIPS16E2)
+#define cpu_has_mips16e2	__isa_lt_and_ase(6, MIPS_ASE_MIPS16E2)
 #endif
 #ifndef cpu_has_mdmx
-#define cpu_has_mdmx		(cpu_data[0].ases & MIPS_ASE_MDMX)
+#define cpu_has_mdmx		__isa_lt_and_ase(6, MIPS_ASE_MDMX)
 #endif
 #ifndef cpu_has_mips3d
-#define cpu_has_mips3d		(cpu_data[0].ases & MIPS_ASE_MIPS3D)
+#define cpu_has_mips3d		__isa_lt_and_ase(6, MIPS_ASE_MIPS3D)
 #endif
 #ifndef cpu_has_smartmips
-#define cpu_has_smartmips	(cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
+#define cpu_has_smartmips	__isa_lt_and_ase(6, MIPS_ASE_SMARTMIPS)
 #endif
 
 #ifndef cpu_has_rixi
-#define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
+#define cpu_has_rixi		__isa_ge_or_opt(6, MIPS_CPU_RIXI)
 #endif
 
 #ifndef cpu_has_mmips
 # ifdef CONFIG_SYS_SUPPORTS_MICROMIPS
-#  define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
+#  define cpu_has_mmips		__opt(MIPS_CPU_MICROMIPS)
 # else
 #  define cpu_has_mmips		0
 # endif
 #endif
 
 #ifndef cpu_has_lpa
-#define cpu_has_lpa		(cpu_data[0].options & MIPS_CPU_LPA)
+#define cpu_has_lpa		__opt(MIPS_CPU_LPA)
 #endif
 #ifndef cpu_has_mvh
-#define cpu_has_mvh		(cpu_data[0].options & MIPS_CPU_MVH)
+#define cpu_has_mvh		__opt(MIPS_CPU_MVH)
 #endif
 #ifndef cpu_has_xpa
 #define cpu_has_xpa		(cpu_has_lpa && cpu_has_mvh)
@@ -338,32 +376,32 @@
 #endif
 
 #ifndef cpu_has_dsp
-#define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
+#define cpu_has_dsp		__ase(MIPS_ASE_DSP)
 #endif
 
 #ifndef cpu_has_dsp2
-#define cpu_has_dsp2		(cpu_data[0].ases & MIPS_ASE_DSP2P)
+#define cpu_has_dsp2		__ase(MIPS_ASE_DSP2P)
 #endif
 
 #ifndef cpu_has_dsp3
-#define cpu_has_dsp3		(cpu_data[0].ases & MIPS_ASE_DSP3)
+#define cpu_has_dsp3		__ase(MIPS_ASE_DSP3)
 #endif
 
 #ifndef cpu_has_mipsmt
-#define cpu_has_mipsmt		(cpu_data[0].ases & MIPS_ASE_MIPSMT)
+#define cpu_has_mipsmt		__isa_lt_and_ase(6, MIPS_ASE_MIPSMT)
 #endif
 
 #ifndef cpu_has_vp
-#define cpu_has_vp		(cpu_data[0].options & MIPS_CPU_VP)
+#define cpu_has_vp		__isa_ge_and_opt(6, MIPS_CPU_VP)
 #endif
 
 #ifndef cpu_has_userlocal
-#define cpu_has_userlocal	(cpu_data[0].options & MIPS_CPU_ULRI)
+#define cpu_has_userlocal	__isa_ge_or_opt(6, MIPS_CPU_ULRI)
 #endif
 
 #ifdef CONFIG_32BIT
 # ifndef cpu_has_nofpuex
-# define cpu_has_nofpuex	(cpu_data[0].options & MIPS_CPU_NOFPUEX)
+# define cpu_has_nofpuex	__isa_lt_and_opt(1, MIPS_CPU_NOFPUEX)
 # endif
 # ifndef cpu_has_64bits
 # define cpu_has_64bits		(cpu_data[0].isa_level & MIPS_CPU_ISA_64BIT)
@@ -405,19 +443,19 @@
 #endif
 
 #if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
-# define cpu_has_vint		(cpu_data[0].options & MIPS_CPU_VINT)
+# define cpu_has_vint		__opt(MIPS_CPU_VINT)
 #elif !defined(cpu_has_vint)
 # define cpu_has_vint			0
 #endif
 
 #if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
-# define cpu_has_veic		(cpu_data[0].options & MIPS_CPU_VEIC)
+# define cpu_has_veic		__opt(MIPS_CPU_VEIC)
 #elif !defined(cpu_has_veic)
 # define cpu_has_veic			0
 #endif
 
 #ifndef cpu_has_inclusive_pcaches
-#define cpu_has_inclusive_pcaches	(cpu_data[0].options & MIPS_CPU_INCLUSIVE_CACHES)
+#define cpu_has_inclusive_pcaches	__opt(MIPS_CPU_INCLUSIVE_CACHES)
 #endif
 
 #ifndef cpu_dcache_line_size
@@ -438,63 +476,63 @@
 #endif
 
 #ifndef cpu_has_perf_cntr_intr_bit
-#define cpu_has_perf_cntr_intr_bit	(cpu_data[0].options & MIPS_CPU_PCI)
+#define cpu_has_perf_cntr_intr_bit	__opt(MIPS_CPU_PCI)
 #endif
 
 #ifndef cpu_has_vz
-#define cpu_has_vz		(cpu_data[0].ases & MIPS_ASE_VZ)
+#define cpu_has_vz		__ase(MIPS_ASE_VZ)
 #endif
 
 #if defined(CONFIG_CPU_HAS_MSA) && !defined(cpu_has_msa)
-# define cpu_has_msa		(cpu_data[0].ases & MIPS_ASE_MSA)
+# define cpu_has_msa		__ase(MIPS_ASE_MSA)
 #elif !defined(cpu_has_msa)
 # define cpu_has_msa		0
 #endif
 
 #ifndef cpu_has_ufr
-# define cpu_has_ufr		(cpu_data[0].options & MIPS_CPU_UFR)
+# define cpu_has_ufr		__opt(MIPS_CPU_UFR)
 #endif
 
 #ifndef cpu_has_fre
-# define cpu_has_fre		(cpu_data[0].options & MIPS_CPU_FRE)
+# define cpu_has_fre		__opt(MIPS_CPU_FRE)
 #endif
 
 #ifndef cpu_has_cdmm
-# define cpu_has_cdmm		(cpu_data[0].options & MIPS_CPU_CDMM)
+# define cpu_has_cdmm		__opt(MIPS_CPU_CDMM)
 #endif
 
 #ifndef cpu_has_small_pages
-# define cpu_has_small_pages	(cpu_data[0].options & MIPS_CPU_SP)
+# define cpu_has_small_pages	__opt(MIPS_CPU_SP)
 #endif
 
 #ifndef cpu_has_nan_legacy
-#define cpu_has_nan_legacy	(cpu_data[0].options & MIPS_CPU_NAN_LEGACY)
+#define cpu_has_nan_legacy	__isa_lt_and_opt(6, MIPS_CPU_NAN_LEGACY)
 #endif
 #ifndef cpu_has_nan_2008
-#define cpu_has_nan_2008	(cpu_data[0].options & MIPS_CPU_NAN_2008)
+#define cpu_has_nan_2008	__isa_ge_or_opt(6, MIPS_CPU_NAN_2008)
 #endif
 
 #ifndef cpu_has_ebase_wg
-# define cpu_has_ebase_wg	(cpu_data[0].options & MIPS_CPU_EBASE_WG)
+# define cpu_has_ebase_wg	__opt(MIPS_CPU_EBASE_WG)
 #endif
 
 #ifndef cpu_has_badinstr
-# define cpu_has_badinstr	(cpu_data[0].options & MIPS_CPU_BADINSTR)
+# define cpu_has_badinstr	__isa_ge_or_opt(6, MIPS_CPU_BADINSTR)
 #endif
 
 #ifndef cpu_has_badinstrp
-# define cpu_has_badinstrp	(cpu_data[0].options & MIPS_CPU_BADINSTRP)
+# define cpu_has_badinstrp	__isa_ge_or_opt(6, MIPS_CPU_BADINSTRP)
 #endif
 
 #ifndef cpu_has_contextconfig
-# define cpu_has_contextconfig	(cpu_data[0].options & MIPS_CPU_CTXTC)
+# define cpu_has_contextconfig	__opt(MIPS_CPU_CTXTC)
 #endif
 
 #ifndef cpu_has_perf
-# define cpu_has_perf		(cpu_data[0].options & MIPS_CPU_PERF)
+# define cpu_has_perf		__opt(MIPS_CPU_PERF)
 #endif
 
-#if defined(CONFIG_SMP) && (MIPS_ISA_REV >= 6)
+#ifdef CONFIG_SMP
 /*
  * Some systems share FTLB RAMs between threads within a core (siblings in
  * kernel parlance). This means that FTLB entries may become invalid at almost
@@ -507,7 +545,7 @@
  */
 # ifndef cpu_has_shared_ftlb_ram
 #  define cpu_has_shared_ftlb_ram \
-	(current_cpu_data.options & MIPS_CPU_SHARED_FTLB_RAM)
+	__isa_ge_and_opt(6, MIPS_CPU_SHARED_FTLB_RAM)
 # endif
 
 /*
@@ -524,9 +562,9 @@
  */
 # ifndef cpu_has_shared_ftlb_entries
 #  define cpu_has_shared_ftlb_entries \
-	(current_cpu_data.options & MIPS_CPU_SHARED_FTLB_ENTRIES)
+	__isa_ge_and_opt(6, MIPS_CPU_SHARED_FTLB_ENTRIES)
 # endif
-#endif /* SMP && MIPS_ISA_REV >= 6 */
+#endif /* SMP */
 
 #ifndef cpu_has_shared_ftlb_ram
 # define cpu_has_shared_ftlb_ram 0
@@ -537,7 +575,7 @@
 
 #ifdef CONFIG_MIPS_MT_SMP
 # define cpu_has_mipsmt_pertccounters \
-	(cpu_data[0].options & MIPS_CPU_MT_PER_TC_PERF_COUNTERS)
+	__isa_lt_and_opt(6, MIPS_CPU_MT_PER_TC_PERF_COUNTERS)
 #else
 # define cpu_has_mipsmt_pertccounters 0
 #endif /* CONFIG_MIPS_MT_SMP */

arch/mips/include/asm/cpu.h

@@ -225,31 +225,32 @@
  * Definitions for 7:0 on legacy processors
  */
 
-#define PRID_REV_TX4927		0x0022
+#define PRID_REV_TX4927			0x0022
-#define PRID_REV_TX4937		0x0030
+#define PRID_REV_TX4937			0x0030
-#define PRID_REV_R4400		0x0040
+#define PRID_REV_R4400			0x0040
-#define PRID_REV_R3000A		0x0030
+#define PRID_REV_R3000A			0x0030
-#define PRID_REV_R3000		0x0020
+#define PRID_REV_R3000			0x0020
-#define PRID_REV_R2000A		0x0010
+#define PRID_REV_R2000A			0x0010
-#define PRID_REV_TX3912		0x0010
+#define PRID_REV_TX3912			0x0010
-#define PRID_REV_TX3922		0x0030
+#define PRID_REV_TX3922			0x0030
-#define PRID_REV_TX3927		0x0040
+#define PRID_REV_TX3927			0x0040
-#define PRID_REV_VR4111		0x0050
+#define PRID_REV_VR4111			0x0050
-#define PRID_REV_VR4181		0x0050	/* Same as VR4111 */
+#define PRID_REV_VR4181			0x0050	/* Same as VR4111 */
-#define PRID_REV_VR4121		0x0060
+#define PRID_REV_VR4121			0x0060
-#define PRID_REV_VR4122		0x0070
+#define PRID_REV_VR4122			0x0070
-#define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
+#define PRID_REV_VR4181A		0x0070	/* Same as VR4122 */
-#define PRID_REV_VR4130		0x0080
+#define PRID_REV_VR4130			0x0080
-#define PRID_REV_34K_V1_0_2	0x0022
+#define PRID_REV_34K_V1_0_2		0x0022
-#define PRID_REV_LOONGSON1B	0x0020
+#define PRID_REV_LOONGSON1B		0x0020
-#define PRID_REV_LOONGSON1C	0x0020	/* Same as Loongson-1B */
+#define PRID_REV_LOONGSON1C		0x0020	/* Same as Loongson-1B */
-#define PRID_REV_LOONGSON2E	0x0002
+#define PRID_REV_LOONGSON2E		0x0002
-#define PRID_REV_LOONGSON2F	0x0003
+#define PRID_REV_LOONGSON2F		0x0003
-#define PRID_REV_LOONGSON3A_R1	0x0005
+#define PRID_REV_LOONGSON3A_R1		0x0005
-#define PRID_REV_LOONGSON3B_R1	0x0006
+#define PRID_REV_LOONGSON3B_R1		0x0006
-#define PRID_REV_LOONGSON3B_R2	0x0007
+#define PRID_REV_LOONGSON3B_R2		0x0007
-#define PRID_REV_LOONGSON3A_R2	0x0008
+#define PRID_REV_LOONGSON3A_R2		0x0008
-#define PRID_REV_LOONGSON3A_R3	0x0009
+#define PRID_REV_LOONGSON3A_R3_0	0x0009
+#define PRID_REV_LOONGSON3A_R3_1	0x000d
 
 /*
  * Older processors used to encode processor version and revision in two

arch/mips/include/asm/dma-coherence.h

@@ -21,10 +21,10 @@ enum coherent_io_user_state {
 extern enum coherent_io_user_state coherentio;
 extern int hw_coherentio;
 #else
-#ifdef CONFIG_DMA_COHERENT
+#ifdef CONFIG_DMA_NONCOHERENT
-#define coherentio	IO_COHERENCE_ENABLED
-#else
 #define coherentio	IO_COHERENCE_DISABLED
+#else
+#define coherentio	IO_COHERENCE_ENABLED
 #endif
 #define hw_coherentio	0
 #endif /* CONFIG_DMA_MAYBE_COHERENT */

arch/mips/include/asm/dma-direct.h

@@ -1 +1,16 @@
-#include <asm/dma-coherence.h>
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MIPS_DMA_DIRECT_H
+#define _MIPS_DMA_DIRECT_H 1
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return false;
+
+	return addr + size - 1 <= *dev->dma_mask;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
+
+#endif /* _MIPS_DMA_DIRECT_H */

arch/mips/include/asm/dma-mapping.h

@@ -2,19 +2,21 @@
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
 
-#include <linux/scatterlist.h>
+#include <linux/swiotlb.h>
-#include <asm/dma-coherence.h>
-#include <asm/cache.h>
 
-#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
+extern const struct dma_map_ops jazz_dma_ops;
-#include <dma-coherence.h>
-#endif
-
-extern const struct dma_map_ops *mips_dma_map_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-	return mips_dma_map_ops;
+#if defined(CONFIG_MACH_JAZZ)
+	return &jazz_dma_ops;
+#elif defined(CONFIG_SWIOTLB)
+	return &swiotlb_dma_ops;
+#elif defined(CONFIG_DMA_NONCOHERENT_OPS)
+	return &dma_noncoherent_ops;
+#else
+	return &dma_direct_ops;
+#endif
 }
 
 #define arch_setup_dma_ops arch_setup_dma_ops

arch/mips/include/asm/io.h

@@ -12,6 +12,8 @@
 #ifndef _ASM_IO_H
 #define _ASM_IO_H
 
+#define ARCH_HAS_IOREMAP_WC
+
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -141,14 +143,14 @@ static inline void * phys_to_virt(unsigned long address)
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */
-static inline unsigned long isa_virt_to_bus(volatile void * address)
+static inline unsigned long isa_virt_to_bus(volatile void *address)
 {
-	return (unsigned long)address - PAGE_OFFSET;
+	return virt_to_phys(address);
 }
 
-static inline void * isa_bus_to_virt(unsigned long address)
+static inline void *isa_bus_to_virt(unsigned long address)
 {
-	return (void *)(address + PAGE_OFFSET);
+	return phys_to_virt(address);
 }
 
 #define isa_page_to_bus page_to_phys
@@ -278,15 +280,25 @@ static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long si
 #define ioremap_cache ioremap_cachable
 
 /*
- * These two are MIPS specific ioremap variant.	 ioremap_cacheable_cow
+ * ioremap_wc     -   map bus memory into CPU space
- * requests a cachable mapping, ioremap_uncached_accelerated requests a
+ * @offset:    bus address of the memory
- * mapping using the uncached accelerated mode which isn't supported on
+ * @size:      size of the resource to map
- * all processors.
+ *
+ * ioremap_wc performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked uncachable
+ * but accelerated by means of write-combining feature. It is specifically
+ * useful for PCIe prefetchable windows, which may vastly improve a
+ * communications performance. If it was determined on boot stage, what
+ * CPU CCA doesn't support UCA, the method shall fall-back to the
+ * _CACHE_UNCACHED option (see cpu_probe() method).
  */
-#define ioremap_cacheable_cow(offset, size)				\
+#define ioremap_wc(offset, size)					\
-	__ioremap_mode((offset), (size), _CACHE_CACHABLE_COW)
+	__ioremap_mode((offset), (size), boot_cpu_data.writecombine)
-#define ioremap_uncached_accelerated(offset, size)			\
-	__ioremap_mode((offset), (size), _CACHE_UNCACHED_ACCELERATED)
 
 static inline void iounmap(const volatile void __iomem *addr)
 {
@@ -590,7 +602,7 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  *
  * This API used to be exported; it now is for arch code internal use only.
  */
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
@@ -609,7 +621,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define dma_cache_inv(start,size)	\
 	do { (void) (start); (void) (size); } while (0)
 
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 /*
  * Read a 32-bit register that requires a 64-bit read cycle on the bus.

arch/mips/include/asm/mach-ar7/spaces.h

@@ -17,9 +17,6 @@
 #define PAGE_OFFSET	_AC(0x94000000, UL)
 #define PHYS_OFFSET	_AC(0x14000000, UL)
 
-#define UNCAC_BASE	_AC(0xb4000000, UL)	/* 0xa0000000 + PHYS_OFFSET */
-#define IO_BASE		UNCAC_BASE
-
 #include <asm/mach-generic/spaces.h>
 
 #endif /* __ASM_AR7_SPACES_H */

arch/mips/include/asm/mach-ath25/dma-coherence.h

@@ -1,76 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
- *
- */
-#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H
-#define __ASM_MACH_ATH25_DMA_COHERENCE_H
-
-#include <linux/device.h>
-
-/*
- * We need some arbitrary non-zero value to be programmed to the BAR1 register
- * of PCI host controller to enable DMA. The same value should be used as the
- * offset to calculate the physical address of DMA buffer for PCI devices.
- */
-#define AR2315_PCI_HOST_SDRAM_BASEADDR	0x20000000
-
-static inline dma_addr_t ath25_dev_offset(struct device *dev)
-{
-#ifdef CONFIG_PCI
-	extern struct bus_type pci_bus_type;
-
-	if (dev && dev->bus == &pci_bus_type)
-		return AR2315_PCI_HOST_SDRAM_BASEADDR;
-#endif
-	return 0;
-}
-
-static inline dma_addr_t
-plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return virt_to_phys(addr) + ath25_dev_offset(dev);
-}
-
-static inline dma_addr_t
-plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return page_to_phys(page) + ath25_dev_offset(dev);
-}
-
-static inline unsigned long
-plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr - ath25_dev_offset(dev);
-}
-
-static inline void
-plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
-		   enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_COHERENT
-	return 1;
-#endif
-#ifdef CONFIG_DMA_NONCOHERENT
-	return 0;
-#endif
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */

arch/mips/include/asm/mach-ath79/ar71xx_regs.h

@@ -20,6 +20,10 @@
 #include <linux/bitops.h>
 
 #define AR71XX_APB_BASE		0x18000000
+#define AR71XX_GE0_BASE		0x19000000
+#define AR71XX_GE0_SIZE		0x10000
+#define AR71XX_GE1_BASE		0x1a000000
+#define AR71XX_GE1_SIZE		0x10000
 #define AR71XX_EHCI_BASE	0x1b000000
 #define AR71XX_EHCI_SIZE	0x1000
 #define AR71XX_OHCI_BASE	0x1c000000
@@ -39,6 +43,8 @@
 #define AR71XX_PLL_SIZE		0x100
 #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
 #define AR71XX_RESET_SIZE	0x100
+#define AR71XX_MII_BASE		(AR71XX_APB_BASE + 0x00070000)
+#define AR71XX_MII_SIZE		0x100
 
 #define AR71XX_PCI_MEM_BASE	0x10000000
 #define AR71XX_PCI_MEM_SIZE	0x07000000
@@ -81,18 +87,39 @@
 
 #define AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
 #define AR933X_UART_SIZE	0x14
+#define AR933X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define AR933X_GMAC_SIZE	0x04
 #define AR933X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
 #define AR933X_WMAC_SIZE	0x20000
 #define AR933X_EHCI_BASE	0x1b000000
 #define AR933X_EHCI_SIZE	0x1000
 
+#define AR934X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define AR934X_GMAC_SIZE	0x14
 #define AR934X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
 #define AR934X_WMAC_SIZE	0x20000
 #define AR934X_EHCI_BASE	0x1b000000
 #define AR934X_EHCI_SIZE	0x200
+#define AR934X_NFC_BASE		0x1b000200
+#define AR934X_NFC_SIZE		0xb8
 #define AR934X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
 #define AR934X_SRIF_SIZE	0x1000
 
+#define QCA953X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define QCA953X_GMAC_SIZE	0x14
+#define QCA953X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+#define QCA953X_WMAC_SIZE	0x20000
+#define QCA953X_EHCI_BASE	0x1b000000
+#define QCA953X_EHCI_SIZE	0x200
+#define QCA953X_SRIF_BASE	(AR71XX_APB_BASE + 0x00116000)
+#define QCA953X_SRIF_SIZE	0x1000
+
+#define QCA953X_PCI_CFG_BASE0	0x14000000
+#define QCA953X_PCI_CTRL_BASE0	(AR71XX_APB_BASE + 0x000f0000)
+#define QCA953X_PCI_CRP_BASE0	(AR71XX_APB_BASE + 0x000c0000)
+#define QCA953X_PCI_MEM_BASE0	0x10000000
+#define QCA953X_PCI_MEM_SIZE	0x02000000
+
 #define QCA955X_PCI_MEM_BASE0	0x10000000
 #define QCA955X_PCI_MEM_BASE1	0x12000000
 #define QCA955X_PCI_MEM_SIZE	0x02000000
@@ -106,11 +133,72 @@
 #define QCA955X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
 #define QCA955X_PCI_CTRL_SIZE	0x100
 
+#define QCA955X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define QCA955X_GMAC_SIZE	0x40
 #define QCA955X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
 #define QCA955X_WMAC_SIZE	0x20000
 #define QCA955X_EHCI0_BASE	0x1b000000
 #define QCA955X_EHCI1_BASE	0x1b400000
 #define QCA955X_EHCI_SIZE	0x1000
+#define QCA955X_NFC_BASE	0x1b800200
+#define QCA955X_NFC_SIZE	0xb8
+
+#define QCA956X_PCI_MEM_BASE1	0x12000000
+#define QCA956X_PCI_MEM_SIZE	0x02000000
+#define QCA956X_PCI_CFG_BASE1	0x16000000
+#define QCA956X_PCI_CFG_SIZE	0x1000
+#define QCA956X_PCI_CRP_BASE1	(AR71XX_APB_BASE + 0x00250000)
+#define QCA956X_PCI_CRP_SIZE	0x1000
+#define QCA956X_PCI_CTRL_BASE1	(AR71XX_APB_BASE + 0x00280000)
+#define QCA956X_PCI_CTRL_SIZE	0x100
+
+#define QCA956X_WMAC_BASE	(AR71XX_APB_BASE + 0x00100000)
+#define QCA956X_WMAC_SIZE	0x20000
+#define QCA956X_EHCI0_BASE	0x1b000000
+#define QCA956X_EHCI1_BASE	0x1b400000
+#define QCA956X_EHCI_SIZE	0x200
+#define QCA956X_GMAC_SGMII_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define QCA956X_GMAC_SGMII_SIZE	0x64
+#define QCA956X_PLL_BASE	(AR71XX_APB_BASE + 0x00050000)
+#define QCA956X_PLL_SIZE	0x50
+#define QCA956X_GMAC_BASE	(AR71XX_APB_BASE + 0x00070000)
+#define QCA956X_GMAC_SIZE	0x64
+
+/*
+ * Hidden Registers
+ */
+#define QCA956X_MAC_CFG_BASE		0xb9000000
+#define QCA956X_MAC_CFG_SIZE		0x64
+
+#define QCA956X_MAC_CFG1_REG		0x00
+#define QCA956X_MAC_CFG1_SOFT_RST	BIT(31)
+#define QCA956X_MAC_CFG1_RX_RST		BIT(19)
+#define QCA956X_MAC_CFG1_TX_RST		BIT(18)
+#define QCA956X_MAC_CFG1_LOOPBACK	BIT(8)
+#define QCA956X_MAC_CFG1_RX_EN		BIT(2)
+#define QCA956X_MAC_CFG1_TX_EN		BIT(0)
+
+#define QCA956X_MAC_CFG2_REG		0x04
+#define QCA956X_MAC_CFG2_IF_1000	BIT(9)
+#define QCA956X_MAC_CFG2_IF_10_100	BIT(8)
+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN	BIT(5)
+#define QCA956X_MAC_CFG2_LEN_CHECK	BIT(4)
+#define QCA956X_MAC_CFG2_PAD_CRC_EN	BIT(2)
+#define QCA956X_MAC_CFG2_FDX		BIT(0)
+
+#define QCA956X_MAC_MII_MGMT_CFG_REG	0x20
+#define QCA956X_MGMT_CFG_CLK_DIV_20	0x07
+
+#define QCA956X_MAC_FIFO_CFG0_REG	0x48
+#define QCA956X_MAC_FIFO_CFG1_REG	0x4c
+#define QCA956X_MAC_FIFO_CFG2_REG	0x50
+#define QCA956X_MAC_FIFO_CFG3_REG	0x54
+#define QCA956X_MAC_FIFO_CFG4_REG	0x58
+#define QCA956X_MAC_FIFO_CFG5_REG	0x5c
+
+#define QCA956X_DAM_RESET_OFFSET	0xb90001bc
+#define QCA956X_DAM_RESET_SIZE		0x4
+#define QCA956X_INLINE_CHKSUM_ENG	BIT(27)
 
 /*
  * DDR_CTRL block
@@ -149,6 +237,12 @@
 #define AR934X_DDR_REG_FLUSH_PCIE	0xa8
 #define AR934X_DDR_REG_FLUSH_WMAC	0xac
 
+#define QCA953X_DDR_REG_FLUSH_GE0	0x9c
+#define QCA953X_DDR_REG_FLUSH_GE1	0xa0
+#define QCA953X_DDR_REG_FLUSH_USB	0xa4
+#define QCA953X_DDR_REG_FLUSH_PCIE	0xa8
+#define QCA953X_DDR_REG_FLUSH_WMAC	0xac
+
 /*
  * PLL block
  */
@@ -166,9 +260,15 @@
 #define AR71XX_AHB_DIV_SHIFT		20
 #define AR71XX_AHB_DIV_MASK		0x7
 
+#define AR71XX_ETH0_PLL_SHIFT		17
+#define AR71XX_ETH1_PLL_SHIFT		19
+
 #define AR724X_PLL_REG_CPU_CONFIG	0x00
 #define AR724X_PLL_REG_PCIE_CONFIG	0x10
 
+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS	BIT(16)
+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET	BIT(25)
+
 #define AR724X_PLL_FB_SHIFT		0
 #define AR724X_PLL_FB_MASK		0x3ff
 #define AR724X_PLL_REF_DIV_SHIFT	10
@@ -178,6 +278,8 @@
 #define AR724X_DDR_DIV_SHIFT		22
 #define AR724X_DDR_DIV_MASK		0x3
 
+#define AR7242_PLL_REG_ETH0_INT_CLOCK	0x2c
+
 #define AR913X_PLL_REG_CPU_CONFIG	0x00
 #define AR913X_PLL_REG_ETH_CONFIG	0x04
 #define AR913X_PLL_REG_ETH0_INT_CLOCK	0x14
@@ -190,6 +292,9 @@
 #define AR913X_AHB_DIV_SHIFT		19
 #define AR913X_AHB_DIV_MASK		0x1
 
+#define AR913X_ETH0_PLL_SHIFT		20
+#define AR913X_ETH1_PLL_SHIFT		22
+
 #define AR933X_PLL_CPU_CONFIG_REG	0x00
 #define AR933X_PLL_CLOCK_CTRL_REG	0x08
 
@@ -211,6 +316,8 @@
 #define AR934X_PLL_CPU_CONFIG_REG		0x00
 #define AR934X_PLL_DDR_CONFIG_REG		0x04
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG		0x08
+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
+#define AR934X_PLL_ETH_XMII_CONTROL_REG		0x2c
 
 #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
 #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
@@ -243,9 +350,52 @@
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL	BIT(21)
 #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL	BIT(24)
 
+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL	BIT(6)
+
+#define QCA953X_PLL_CPU_CONFIG_REG		0x00
+#define QCA953X_PLL_DDR_CONFIG_REG		0x04
+#define QCA953X_PLL_CLK_CTRL_REG		0x08
+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG	0x24
+#define QCA953X_PLL_ETH_XMII_CONTROL_REG	0x2c
+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG	0x48
+
+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT	6
+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK	0x3f
+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT	12
+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK	0x1f
+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT	19
+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK	0x7
+
+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT	0
+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK	0x3ff
+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT	10
+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK	0x3f
+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT	16
+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK	0x1f
+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT	23
+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK	0x7
+
+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL		BIT(20)
+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
+
 #define QCA955X_PLL_CPU_CONFIG_REG		0x00
 #define QCA955X_PLL_DDR_CONFIG_REG		0x04
 #define QCA955X_PLL_CLK_CTRL_REG		0x08
+#define QCA955X_PLL_ETH_XMII_CONTROL_REG	0x28
+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG	0x48
+#define QCA955X_PLL_ETH_SGMII_SERDES_REG	0x4c
 
 #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT	0
 #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK	0x3f
@@ -278,6 +428,81 @@
 #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL		BIT(21)
 #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
 
+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT	BIT(2)
+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK		BIT(1)
+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL		BIT(0)
+
+#define QCA956X_PLL_CPU_CONFIG_REG			0x00
+#define QCA956X_PLL_CPU_CONFIG1_REG			0x04
+#define QCA956X_PLL_DDR_CONFIG_REG			0x08
+#define QCA956X_PLL_DDR_CONFIG1_REG			0x0c
+#define QCA956X_PLL_CLK_CTRL_REG			0x10
+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG		0x28
+#define QCA956X_PLL_ETH_XMII_CONTROL_REG		0x30
+#define QCA956X_PLL_ETH_SGMII_SERDES_REG		0x4c
+
+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT		12
+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK		0x1f
+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT		19
+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK		0x7
+
+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT		0
+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK		0x1f
+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT		5
+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK		0x1fff
+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT		18
+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK		0x1ff
+
+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT		16
+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK		0x1f
+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT		23
+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK		0x7
+
+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT		0
+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK		0x1f
+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT		5
+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK		0x1fff
+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT		18
+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK		0x1ff
+
+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS		BIT(2)
+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS		BIT(3)
+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS		BIT(4)
+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT		5
+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK		0x1f
+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT		10
+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK		0x1f
+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT		15
+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK		0x1f
+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL	BIT(20)
+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL	BIT(21)
+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL		BIT(24)
+
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB		BIT(5)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1		BIT(6)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL		BIT(7)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK	 0xf
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP		BIT(12)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2		BIT(13)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1		BIT(14)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2		BIT(15)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE	BIT(16)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE		BIT(17)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL		BIT(18)
+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL		BIT(19)
+
+#define QCA956X_PLL_ETH_XMII_TX_INVERT			BIT(1)
+#define QCA956X_PLL_ETH_XMII_GIGE			BIT(25)
+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT		28
+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK		0x3
+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT		26
+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK		3
+
+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT		BIT(2)
+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK			BIT(1)
+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL			BIT(0)
+
 /*
  * USB_CONFIG block
  */
@@ -317,10 +542,19 @@
 #define AR934X_RESET_REG_BOOTSTRAP		0xb0
 #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
 
+#define QCA953X_RESET_REG_RESET_MODULE		0x1c
+#define QCA953X_RESET_REG_BOOTSTRAP		0xb0
+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS	0xac
+
 #define QCA955X_RESET_REG_RESET_MODULE		0x1c
 #define QCA955X_RESET_REG_BOOTSTRAP		0xb0
 #define QCA955X_RESET_REG_EXT_INT_STATUS	0xac
 
+#define QCA956X_RESET_REG_RESET_MODULE		0x1c
+#define QCA956X_RESET_REG_BOOTSTRAP		0xb0
+#define QCA956X_RESET_REG_EXT_INT_STATUS	0xac
+
+#define MISC_INT_MIPS_SI_TIMERINT_MASK	BIT(28)
 #define MISC_INT_ETHSW			BIT(12)
 #define MISC_INT_TIMER4			BIT(10)
 #define MISC_INT_TIMER3			BIT(9)
@@ -370,16 +604,123 @@
 #define AR913X_RESET_USB_HOST		BIT(5)
 #define AR913X_RESET_USB_PHY		BIT(4)
 
+#define AR933X_RESET_GE1_MDIO		BIT(23)
+#define AR933X_RESET_GE0_MDIO		BIT(22)
+#define AR933X_RESET_GE1_MAC		BIT(13)
 #define AR933X_RESET_WMAC		BIT(11)
+#define AR933X_RESET_GE0_MAC		BIT(9)
 #define AR933X_RESET_USB_HOST		BIT(5)
 #define AR933X_RESET_USB_PHY		BIT(4)
 #define AR933X_RESET_USBSUS_OVERRIDE	BIT(3)
 
+#define AR934X_RESET_HOST		BIT(31)
+#define AR934X_RESET_SLIC		BIT(30)
+#define AR934X_RESET_HDMA		BIT(29)
+#define AR934X_RESET_EXTERNAL		BIT(28)
+#define AR934X_RESET_RTC		BIT(27)
+#define AR934X_RESET_PCIE_EP_INT	BIT(26)
+#define AR934X_RESET_CHKSUM_ACC		BIT(25)
+#define AR934X_RESET_FULL_CHIP		BIT(24)
+#define AR934X_RESET_GE1_MDIO		BIT(23)
+#define AR934X_RESET_GE0_MDIO		BIT(22)
+#define AR934X_RESET_CPU_NMI		BIT(21)
+#define AR934X_RESET_CPU_COLD		BIT(20)
+#define AR934X_RESET_HOST_RESET_INT	BIT(19)
+#define AR934X_RESET_PCIE_EP		BIT(18)
+#define AR934X_RESET_UART1		BIT(17)
+#define AR934X_RESET_DDR		BIT(16)
+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define AR934X_RESET_NANDF		BIT(14)
+#define AR934X_RESET_GE1_MAC		BIT(13)
+#define AR934X_RESET_ETH_SWITCH_ANALOG	BIT(12)
 #define AR934X_RESET_USB_PHY_ANALOG	BIT(11)
+#define AR934X_RESET_HOST_DMA_INT	BIT(10)
+#define AR934X_RESET_GE0_MAC		BIT(9)
+#define AR934X_RESET_ETH_SWITCH		BIT(8)
+#define AR934X_RESET_PCIE_PHY		BIT(7)
+#define AR934X_RESET_PCIE		BIT(6)
 #define AR934X_RESET_USB_HOST		BIT(5)
 #define AR934X_RESET_USB_PHY		BIT(4)
 #define AR934X_RESET_USBSUS_OVERRIDE	BIT(3)
+#define AR934X_RESET_LUT		BIT(2)
+#define AR934X_RESET_MBOX		BIT(1)
+#define AR934X_RESET_I2S		BIT(0)
 
+#define QCA953X_RESET_USB_EXT_PWR	BIT(29)
+#define QCA953X_RESET_EXTERNAL		BIT(28)
+#define QCA953X_RESET_RTC		BIT(27)
+#define QCA953X_RESET_FULL_CHIP		BIT(24)
+#define QCA953X_RESET_GE1_MDIO		BIT(23)
+#define QCA953X_RESET_GE0_MDIO		BIT(22)
+#define QCA953X_RESET_CPU_NMI		BIT(21)
+#define QCA953X_RESET_CPU_COLD		BIT(20)
+#define QCA953X_RESET_DDR		BIT(16)
+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define QCA953X_RESET_GE1_MAC		BIT(13)
+#define QCA953X_RESET_ETH_SWITCH_ANALOG	BIT(12)
+#define QCA953X_RESET_USB_PHY_ANALOG	BIT(11)
+#define QCA953X_RESET_GE0_MAC		BIT(9)
+#define QCA953X_RESET_ETH_SWITCH	BIT(8)
+#define QCA953X_RESET_PCIE_PHY		BIT(7)
+#define QCA953X_RESET_PCIE		BIT(6)
+#define QCA953X_RESET_USB_HOST		BIT(5)
+#define QCA953X_RESET_USB_PHY		BIT(4)
+#define QCA953X_RESET_USBSUS_OVERRIDE	BIT(3)
+
+#define QCA955X_RESET_HOST		BIT(31)
+#define QCA955X_RESET_SLIC		BIT(30)
+#define QCA955X_RESET_HDMA		BIT(29)
+#define QCA955X_RESET_EXTERNAL		BIT(28)
+#define QCA955X_RESET_RTC		BIT(27)
+#define QCA955X_RESET_PCIE_EP_INT	BIT(26)
+#define QCA955X_RESET_CHKSUM_ACC	BIT(25)
+#define QCA955X_RESET_FULL_CHIP		BIT(24)
+#define QCA955X_RESET_GE1_MDIO		BIT(23)
+#define QCA955X_RESET_GE0_MDIO		BIT(22)
+#define QCA955X_RESET_CPU_NMI		BIT(21)
+#define QCA955X_RESET_CPU_COLD		BIT(20)
+#define QCA955X_RESET_HOST_RESET_INT	BIT(19)
+#define QCA955X_RESET_PCIE_EP		BIT(18)
+#define QCA955X_RESET_UART1		BIT(17)
+#define QCA955X_RESET_DDR		BIT(16)
+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
+#define QCA955X_RESET_NANDF		BIT(14)
+#define QCA955X_RESET_GE1_MAC		BIT(13)
+#define QCA955X_RESET_SGMII_ANALOG	BIT(12)
+#define QCA955X_RESET_USB_PHY_ANALOG	BIT(11)
+#define QCA955X_RESET_HOST_DMA_INT	BIT(10)
+#define QCA955X_RESET_GE0_MAC		BIT(9)
+#define QCA955X_RESET_SGMII		BIT(8)
+#define QCA955X_RESET_PCIE_PHY		BIT(7)
+#define QCA955X_RESET_PCIE		BIT(6)
+#define QCA955X_RESET_USB_HOST		BIT(5)
+#define QCA955X_RESET_USB_PHY		BIT(4)
+#define QCA955X_RESET_USBSUS_OVERRIDE	BIT(3)
+#define QCA955X_RESET_LUT		BIT(2)
+#define QCA955X_RESET_MBOX		BIT(1)
+#define QCA955X_RESET_I2S		BIT(0)
+
+#define QCA956X_RESET_EXTERNAL		BIT(28)
+#define QCA956X_RESET_FULL_CHIP		BIT(24)
+#define QCA956X_RESET_GE1_MDIO		BIT(23)
+#define QCA956X_RESET_GE0_MDIO		BIT(22)
+#define QCA956X_RESET_CPU_NMI		BIT(21)
+#define QCA956X_RESET_CPU_COLD		BIT(20)
+#define QCA956X_RESET_DMA		BIT(19)
+#define QCA956X_RESET_DDR		BIT(16)
+#define QCA956X_RESET_GE1_MAC		BIT(13)
+#define QCA956X_RESET_SGMII_ANALOG	BIT(12)
+#define QCA956X_RESET_USB_PHY_ANALOG	BIT(11)
+#define QCA956X_RESET_GE0_MAC		BIT(9)
+#define QCA956X_RESET_SGMII		BIT(8)
+#define QCA956X_RESET_USB_HOST		BIT(5)
+#define QCA956X_RESET_USB_PHY		BIT(4)
+#define QCA956X_RESET_USBSUS_OVERRIDE	BIT(3)
+#define QCA956X_RESET_SWITCH_ANALOG	BIT(2)
+#define QCA956X_RESET_SWITCH		BIT(0)
+
+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN	BIT(18)
+#define AR933X_BOOTSTRAP_EEPBUSY	BIT(4)
 #define AR933X_BOOTSTRAP_REF_CLK_40	BIT(0)
 
 #define AR934X_BOOTSTRAP_SW_OPTION8	BIT(23)
@@ -398,8 +739,17 @@
 #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
 #define AR934X_BOOTSTRAP_DDR1		BIT(0)
 
+#define QCA953X_BOOTSTRAP_SW_OPTION2	BIT(12)
+#define QCA953X_BOOTSTRAP_SW_OPTION1	BIT(11)
+#define QCA953X_BOOTSTRAP_EJTAG_MODE	BIT(5)
+#define QCA953X_BOOTSTRAP_REF_CLK_40	BIT(4)
+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+#define QCA953X_BOOTSTRAP_DDR1		BIT(0)
+
 #define QCA955X_BOOTSTRAP_REF_CLK_40	BIT(4)
 
+#define QCA956X_BOOTSTRAP_REF_CLK_40	BIT(2)
+
 #define AR934X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
 #define AR934X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
 #define AR934X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
@@ -418,6 +768,24 @@
 	 AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
 	 AR934X_PCIE_WMAC_INT_PCIE_RC3)
 
+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC		BIT(0)
+#define QCA953X_PCIE_WMAC_INT_WMAC_TX		BIT(1)
+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP		BIT(2)
+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP		BIT(3)
+#define QCA953X_PCIE_WMAC_INT_PCIE_RC		BIT(4)
+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0		BIT(5)
+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1		BIT(6)
+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2		BIT(7)
+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3		BIT(8)
+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
+	(QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
+	 QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
+
+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
+	(QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
+	 QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
+	 QCA953X_PCIE_WMAC_INT_PCIE_RC3)
+
 #define QCA955X_EXT_INT_WMAC_MISC		BIT(0)
 #define QCA955X_EXT_INT_WMAC_TX			BIT(1)
 #define QCA955X_EXT_INT_WMAC_RXLP		BIT(2)
@@ -449,6 +817,37 @@
 	 QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
 	 QCA955X_EXT_INT_PCIE_RC2_INT3)
 
+#define QCA956X_EXT_INT_WMAC_MISC		BIT(0)
+#define QCA956X_EXT_INT_WMAC_TX			BIT(1)
+#define QCA956X_EXT_INT_WMAC_RXLP		BIT(2)
+#define QCA956X_EXT_INT_WMAC_RXHP		BIT(3)
+#define QCA956X_EXT_INT_PCIE_RC1		BIT(4)
+#define QCA956X_EXT_INT_PCIE_RC1_INT0		BIT(5)
+#define QCA956X_EXT_INT_PCIE_RC1_INT1		BIT(6)
+#define QCA956X_EXT_INT_PCIE_RC1_INT2		BIT(7)
+#define QCA956X_EXT_INT_PCIE_RC1_INT3		BIT(8)
+#define QCA956X_EXT_INT_PCIE_RC2		BIT(12)
+#define QCA956X_EXT_INT_PCIE_RC2_INT0		BIT(13)
+#define QCA956X_EXT_INT_PCIE_RC2_INT1		BIT(14)
+#define QCA956X_EXT_INT_PCIE_RC2_INT2		BIT(15)
+#define QCA956X_EXT_INT_PCIE_RC2_INT3		BIT(16)
+#define QCA956X_EXT_INT_USB1			BIT(24)
+#define QCA956X_EXT_INT_USB2			BIT(28)
+
+#define QCA956X_EXT_INT_WMAC_ALL \
+	(QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
+	 QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
+
+#define QCA956X_EXT_INT_PCIE_RC1_ALL \
+	(QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
+	 QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
+	 QCA956X_EXT_INT_PCIE_RC1_INT3)
+
+#define QCA956X_EXT_INT_PCIE_RC2_ALL \
+	(QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
+	 QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
+	 QCA956X_EXT_INT_PCIE_RC2_INT3)
+
 #define REV_ID_MAJOR_MASK		0xfff0
 #define REV_ID_MAJOR_AR71XX		0x00a0
 #define REV_ID_MAJOR_AR913X		0x00b0
@@ -460,8 +859,12 @@
 #define REV_ID_MAJOR_AR9341		0x0120
 #define REV_ID_MAJOR_AR9342		0x1120
 #define REV_ID_MAJOR_AR9344		0x2120
+#define REV_ID_MAJOR_QCA9533		0x0140
+#define REV_ID_MAJOR_QCA9533_V2		0x0160
 #define REV_ID_MAJOR_QCA9556		0x0130
 #define REV_ID_MAJOR_QCA9558		0x1130
+#define REV_ID_MAJOR_TP9343		0x0150
+#define REV_ID_MAJOR_QCA956X		0x1150
 
 #define AR71XX_REV_ID_MINOR_MASK	0x3
 #define AR71XX_REV_ID_MINOR_AR7130	0x0
@@ -482,8 +885,12 @@
 
 #define AR934X_REV_ID_REVISION_MASK	0xf
 
+#define QCA953X_REV_ID_REVISION_MASK	0xf
+
 #define QCA955X_REV_ID_REVISION_MASK	0xf
 
+#define QCA956X_REV_ID_REVISION_MASK	0xf
+
 /*
  * SPI block
  */
@@ -521,15 +928,63 @@
 #define AR71XX_GPIO_REG_INT_ENABLE	0x24
 #define AR71XX_GPIO_REG_FUNC		0x28
 
+#define AR934X_GPIO_REG_OUT_FUNC0	0x2c
+#define AR934X_GPIO_REG_OUT_FUNC1	0x30
+#define AR934X_GPIO_REG_OUT_FUNC2	0x34
+#define AR934X_GPIO_REG_OUT_FUNC3	0x38
+#define AR934X_GPIO_REG_OUT_FUNC4	0x3c
+#define AR934X_GPIO_REG_OUT_FUNC5	0x40
 #define AR934X_GPIO_REG_FUNC		0x6c
 
+#define QCA953X_GPIO_REG_OUT_FUNC0	0x2c
+#define QCA953X_GPIO_REG_OUT_FUNC1	0x30
+#define QCA953X_GPIO_REG_OUT_FUNC2	0x34
+#define QCA953X_GPIO_REG_OUT_FUNC3	0x38
+#define QCA953X_GPIO_REG_OUT_FUNC4	0x3c
+#define QCA953X_GPIO_REG_IN_ENABLE0	0x44
+#define QCA953X_GPIO_REG_FUNC		0x6c
+
+#define QCA953X_GPIO_OUT_MUX_SPI_CS1		10
+#define QCA953X_GPIO_OUT_MUX_SPI_CS2		11
+#define QCA953X_GPIO_OUT_MUX_SPI_CS0		9
+#define QCA953X_GPIO_OUT_MUX_SPI_CLK		8
+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI		12
+#define QCA953X_GPIO_OUT_MUX_LED_LINK1		41
+#define QCA953X_GPIO_OUT_MUX_LED_LINK2		42
+#define QCA953X_GPIO_OUT_MUX_LED_LINK3		43
+#define QCA953X_GPIO_OUT_MUX_LED_LINK4		44
+#define QCA953X_GPIO_OUT_MUX_LED_LINK5		45
+
+#define QCA955X_GPIO_REG_OUT_FUNC0	0x2c
+#define QCA955X_GPIO_REG_OUT_FUNC1	0x30
+#define QCA955X_GPIO_REG_OUT_FUNC2	0x34
+#define QCA955X_GPIO_REG_OUT_FUNC3	0x38
+#define QCA955X_GPIO_REG_OUT_FUNC4	0x3c
+#define QCA955X_GPIO_REG_OUT_FUNC5	0x40
+#define QCA955X_GPIO_REG_FUNC		0x6c
+
+#define QCA956X_GPIO_REG_OUT_FUNC0	0x2c
+#define QCA956X_GPIO_REG_OUT_FUNC1	0x30
+#define QCA956X_GPIO_REG_OUT_FUNC2	0x34
+#define QCA956X_GPIO_REG_OUT_FUNC3	0x38
+#define QCA956X_GPIO_REG_OUT_FUNC4	0x3c
+#define QCA956X_GPIO_REG_OUT_FUNC5	0x40
+#define QCA956X_GPIO_REG_IN_ENABLE0	0x44
+#define QCA956X_GPIO_REG_IN_ENABLE3	0x50
+#define QCA956X_GPIO_REG_FUNC		0x6c
+
+#define QCA956X_GPIO_OUT_MUX_GE0_MDO	32
+#define QCA956X_GPIO_OUT_MUX_GE0_MDC	33
+
 #define AR71XX_GPIO_COUNT		16
 #define AR7240_GPIO_COUNT		18
 #define AR7241_GPIO_COUNT		20
 #define AR913X_GPIO_COUNT		22
 #define AR933X_GPIO_COUNT		30
 #define AR934X_GPIO_COUNT		23
+#define QCA953X_GPIO_COUNT		18
 #define QCA955X_GPIO_COUNT		24
+#define QCA956X_GPIO_COUNT		23
 
 /*
  * SRIF block
@@ -552,4 +1007,318 @@
 #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT	13
 #define AR934X_SRIF_DPLL2_OUTDIV_MASK	0x7
 
+#define QCA953X_SRIF_CPU_DPLL1_REG	0x1c0
+#define QCA953X_SRIF_CPU_DPLL2_REG	0x1c4
+#define QCA953X_SRIF_CPU_DPLL3_REG	0x1c8
+
+#define QCA953X_SRIF_DDR_DPLL1_REG	0x240
+#define QCA953X_SRIF_DDR_DPLL2_REG	0x244
+#define QCA953X_SRIF_DDR_DPLL3_REG	0x248
+
+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT	27
+#define QCA953X_SRIF_DPLL1_REFDIV_MASK	0x1f
+#define QCA953X_SRIF_DPLL1_NINT_SHIFT	18
+#define QCA953X_SRIF_DPLL1_NINT_MASK	0x1ff
+#define QCA953X_SRIF_DPLL1_NFRAC_MASK	0x0003ffff
+
+#define QCA953X_SRIF_DPLL2_LOCAL_PLL	BIT(30)
+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT	13
+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK	0x7
+
+#define AR71XX_GPIO_FUNC_STEREO_EN		BIT(17)
+#define AR71XX_GPIO_FUNC_SLIC_EN		BIT(16)
+#define AR71XX_GPIO_FUNC_SPI_CS2_EN		BIT(13)
+#define AR71XX_GPIO_FUNC_SPI_CS1_EN		BIT(12)
+#define AR71XX_GPIO_FUNC_UART_EN		BIT(8)
+#define AR71XX_GPIO_FUNC_USB_OC_EN		BIT(4)
+#define AR71XX_GPIO_FUNC_USB_CLK_EN		BIT(0)
+
+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN		BIT(19)
+#define AR724X_GPIO_FUNC_SPI_EN			BIT(18)
+#define AR724X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
+#define AR724X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
+#define AR724X_GPIO_FUNC_CLK_OBS5_EN		BIT(12)
+#define AR724X_GPIO_FUNC_CLK_OBS4_EN		BIT(11)
+#define AR724X_GPIO_FUNC_CLK_OBS3_EN		BIT(10)
+#define AR724X_GPIO_FUNC_CLK_OBS2_EN		BIT(9)
+#define AR724X_GPIO_FUNC_CLK_OBS1_EN		BIT(8)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
+#define AR724X_GPIO_FUNC_UART_EN		BIT(1)
+#define AR724X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
+
+#define AR913X_GPIO_FUNC_WMAC_LED_EN		BIT(22)
+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN		BIT(21)
+#define AR913X_GPIO_FUNC_I2S_REFCLKEN		BIT(20)
+#define AR913X_GPIO_FUNC_I2S_MCKEN		BIT(19)
+#define AR913X_GPIO_FUNC_I2S1_EN		BIT(18)
+#define AR913X_GPIO_FUNC_I2S0_EN		BIT(17)
+#define AR913X_GPIO_FUNC_SLIC_EN		BIT(16)
+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN		BIT(9)
+#define AR913X_GPIO_FUNC_UART_EN		BIT(8)
+#define AR913X_GPIO_FUNC_USB_CLK_EN		BIT(4)
+
+#define AR933X_GPIO_FUNC_SPDIF2TCK		BIT(31)
+#define AR933X_GPIO_FUNC_SPDIF_EN		BIT(30)
+#define AR933X_GPIO_FUNC_I2SO_22_18_EN		BIT(29)
+#define AR933X_GPIO_FUNC_I2S_MCK_EN		BIT(27)
+#define AR933X_GPIO_FUNC_I2SO_EN		BIT(26)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL	BIT(25)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL	BIT(24)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT	BIT(23)
+#define AR933X_GPIO_FUNC_SPI_EN			BIT(18)
+#define AR933X_GPIO_FUNC_SPI_CS_EN2		BIT(14)
+#define AR933X_GPIO_FUNC_SPI_CS_EN1		BIT(13)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN	BIT(7)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN	BIT(6)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN	BIT(5)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN	BIT(4)
+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN	BIT(3)
+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN	BIT(2)
+#define AR933X_GPIO_FUNC_UART_EN		BIT(1)
+#define AR933X_GPIO_FUNC_JTAG_DISABLE		BIT(0)
+
+#define AR934X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
+#define AR934X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
+#define AR934X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
+#define AR934X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
+#define AR934X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
+#define AR934X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
+#define AR934X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
+#define AR934X_GPIO_FUNC_CLK_OBS0_EN		BIT(2)
+#define AR934X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
+
+#define AR934X_GPIO_OUT_GPIO		0
+#define AR934X_GPIO_OUT_SPI_CS1	7
+#define AR934X_GPIO_OUT_LED_LINK0	41
+#define AR934X_GPIO_OUT_LED_LINK1	42
+#define AR934X_GPIO_OUT_LED_LINK2	43
+#define AR934X_GPIO_OUT_LED_LINK3	44
+#define AR934X_GPIO_OUT_LED_LINK4	45
+#define AR934X_GPIO_OUT_EXT_LNA0	46
+#define AR934X_GPIO_OUT_EXT_LNA1	47
+
+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN		BIT(9)
+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN		BIT(8)
+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN		BIT(7)
+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN		BIT(6)
+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN		BIT(5)
+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN		BIT(4)
+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN		BIT(3)
+#define QCA955X_GPIO_FUNC_JTAG_DISABLE		BIT(1)
+
+#define QCA955X_GPIO_OUT_GPIO		0
+#define QCA955X_MII_EXT_MDI		1
+#define QCA955X_SLIC_DATA_OUT		3
+#define QCA955X_SLIC_PCM_FS		4
+#define QCA955X_SLIC_PCM_CLK		5
+#define QCA955X_SPI_CLK			8
+#define QCA955X_SPI_CS_0		9
+#define QCA955X_SPI_CS_1		10
+#define QCA955X_SPI_CS_2		11
+#define QCA955X_SPI_MISO		12
+#define QCA955X_I2S_CLK			13
+#define QCA955X_I2S_WS			14
+#define QCA955X_I2S_SD			15
+#define QCA955X_I2S_MCK			16
+#define QCA955X_SPDIF_OUT		17
+#define QCA955X_UART1_TD		18
+#define QCA955X_UART1_RTS		19
+#define QCA955X_UART1_RD		20
+#define QCA955X_UART1_CTS		21
+#define QCA955X_UART0_SOUT		22
+#define QCA955X_SPDIF2_OUT		23
+#define QCA955X_LED_SGMII_SPEED0	24
+#define QCA955X_LED_SGMII_SPEED1	25
+#define QCA955X_LED_SGMII_DUPLEX	26
+#define QCA955X_LED_SGMII_LINK_UP	27
+#define QCA955X_SGMII_SPEED0_INVERT	28
+#define QCA955X_SGMII_SPEED1_INVERT	29
+#define QCA955X_SGMII_DUPLEX_INVERT	30
+#define QCA955X_SGMII_LINK_UP_INVERT	31
+#define QCA955X_GE1_MII_MDO		32
+#define QCA955X_GE1_MII_MDC		33
+#define QCA955X_SWCOM2			38
+#define QCA955X_SWCOM3			39
+#define QCA955X_MAC2_GPIO		40
+#define QCA955X_MAC3_GPIO		41
+#define QCA955X_ATT_LED			42
+#define QCA955X_PWR_LED			43
+#define QCA955X_TX_FRAME		44
+#define QCA955X_RX_CLEAR_EXTERNAL	45
+#define QCA955X_LED_NETWORK_EN		46
+#define QCA955X_LED_POWER_EN		47
+#define QCA955X_WMAC_GLUE_WOW		68
+#define QCA955X_RX_CLEAR_EXTENSION	70
+#define QCA955X_CP_NAND_CS1		73
+#define QCA955X_USB_SUSPEND		74
+#define QCA955X_ETH_TX_ERR		75
+#define QCA955X_DDR_DQ_OE		76
+#define QCA955X_CLKREQ_N_EP		77
+#define QCA955X_CLKREQ_N_RC		78
+#define QCA955X_CLK_OBS0		79
+#define QCA955X_CLK_OBS1		80
+#define QCA955X_CLK_OBS2		81
+#define QCA955X_CLK_OBS3		82
+#define QCA955X_CLK_OBS4		83
+#define QCA955X_CLK_OBS5		84
+
+/*
+ * MII_CTRL block
+ */
+#define AR71XX_MII_REG_MII0_CTRL	0x00
+#define AR71XX_MII_REG_MII1_CTRL	0x04
+
+#define AR71XX_MII_CTRL_IF_MASK		3
+#define AR71XX_MII_CTRL_SPEED_SHIFT	4
+#define AR71XX_MII_CTRL_SPEED_MASK	3
+#define AR71XX_MII_CTRL_SPEED_10	0
+#define AR71XX_MII_CTRL_SPEED_100	1
+#define AR71XX_MII_CTRL_SPEED_1000	2
+
+#define AR71XX_MII0_CTRL_IF_GMII	0
+#define AR71XX_MII0_CTRL_IF_MII		1
+#define AR71XX_MII0_CTRL_IF_RGMII	2
+#define AR71XX_MII0_CTRL_IF_RMII	3
+
+#define AR71XX_MII1_CTRL_IF_RGMII	0
+#define AR71XX_MII1_CTRL_IF_RMII	1
+
+/*
+ * AR933X GMAC interface
+ */
+#define AR933X_GMAC_REG_ETH_CFG		0x00
+
+#define AR933X_ETH_CFG_RGMII_GE0	BIT(0)
+#define AR933X_ETH_CFG_MII_GE0		BIT(1)
+#define AR933X_ETH_CFG_GMII_GE0		BIT(2)
+#define AR933X_ETH_CFG_MII_GE0_MASTER	BIT(3)
+#define AR933X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
+#define AR933X_ETH_CFG_MII_GE0_ERR_EN	BIT(5)
+#define AR933X_ETH_CFG_SW_PHY_SWAP	BIT(7)
+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(8)
+#define AR933X_ETH_CFG_RMII_GE0		BIT(9)
+#define AR933X_ETH_CFG_RMII_GE0_SPD_10	0
+#define AR933X_ETH_CFG_RMII_GE0_SPD_100	BIT(10)
+
+/*
+ * AR934X GMAC Interface
+ */
+#define AR934X_GMAC_REG_ETH_CFG		0x00
+
+#define AR934X_ETH_CFG_RGMII_GMAC0	BIT(0)
+#define AR934X_ETH_CFG_MII_GMAC0	BIT(1)
+#define AR934X_ETH_CFG_GMII_GMAC0	BIT(2)
+#define AR934X_ETH_CFG_MII_GMAC0_MASTER	BIT(3)
+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE	BIT(4)
+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN	BIT(5)
+#define AR934X_ETH_CFG_SW_ONLY_MODE	BIT(6)
+#define AR934X_ETH_CFG_SW_PHY_SWAP	BIT(7)
+#define AR934X_ETH_CFG_SW_APB_ACCESS	BIT(9)
+#define AR934X_ETH_CFG_RMII_GMAC0	BIT(10)
+#define AR933X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
+#define AR934X_ETH_CFG_RXD_DELAY        BIT(14)
+#define AR934X_ETH_CFG_RXD_DELAY_MASK   0x3
+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT  14
+#define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
+#define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
+
+/*
+ * QCA953X GMAC Interface
+ */
+#define QCA953X_GMAC_REG_ETH_CFG		0x00
+
+#define QCA953X_ETH_CFG_SW_ONLY_MODE		BIT(6)
+#define QCA953X_ETH_CFG_SW_PHY_SWAP		BIT(7)
+#define QCA953X_ETH_CFG_SW_APB_ACCESS		BIT(9)
+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
+
+/*
+ * QCA955X GMAC Interface
+ */
+
+#define QCA955X_GMAC_REG_ETH_CFG	0x00
+#define QCA955X_GMAC_REG_SGMII_SERDES	0x18
+
+#define QCA955X_ETH_CFG_RGMII_EN	BIT(0)
+#define QCA955X_ETH_CFG_MII_GE0		BIT(1)
+#define QCA955X_ETH_CFG_GMII_GE0	BIT(2)
+#define QCA955X_ETH_CFG_MII_GE0_MASTER	BIT(3)
+#define QCA955X_ETH_CFG_MII_GE0_SLAVE	BIT(4)
+#define QCA955X_ETH_CFG_GE0_ERR_EN	BIT(5)
+#define QCA955X_ETH_CFG_GE0_SGMII	BIT(6)
+#define QCA955X_ETH_CFG_RMII_GE0	BIT(10)
+#define QCA955X_ETH_CFG_MII_CNTL_SPEED	BIT(11)
+#define QCA955X_ETH_CFG_RMII_GE0_MASTER	BIT(12)
+#define QCA955X_ETH_CFG_RXD_DELAY_MASK	0x3
+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT	14
+#define QCA955X_ETH_CFG_RDV_DELAY	BIT(16)
+#define QCA955X_ETH_CFG_RDV_DELAY_MASK	0x3
+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT	16
+#define QCA955X_ETH_CFG_TXD_DELAY_MASK	0x3
+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT	18
+#define QCA955X_ETH_CFG_TXE_DELAY_MASK	0x3
+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT	20
+
+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
+/*
+ * QCA956X GMAC Interface
+ */
+
+#define QCA956X_GMAC_REG_ETH_CFG	0x00
+#define QCA956X_GMAC_REG_SGMII_RESET	0x14
+#define QCA956X_GMAC_REG_SGMII_SERDES	0x18
+#define QCA956X_GMAC_REG_MR_AN_CONTROL	0x1c
+#define QCA956X_GMAC_REG_SGMII_CONFIG	0x34
+#define QCA956X_GMAC_REG_SGMII_DEBUG	0x58
+
+#define QCA956X_ETH_CFG_RGMII_EN		BIT(0)
+#define QCA956X_ETH_CFG_GE0_SGMII		BIT(6)
+#define QCA956X_ETH_CFG_SW_ONLY_MODE		BIT(7)
+#define QCA956X_ETH_CFG_SW_PHY_SWAP		BIT(8)
+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP	BIT(9)
+#define QCA956X_ETH_CFG_SW_APB_ACCESS		BIT(10)
+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST	BIT(13)
+#define QCA956X_ETH_CFG_RXD_DELAY_MASK		0x3
+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT		14
+#define QCA956X_ETH_CFG_RDV_DELAY_MASK		0x3
+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT		16
+
+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET	0x0
+#define QCA956X_SGMII_RESET_RX_CLK_N		BIT(0)
+#define QCA956X_SGMII_RESET_TX_CLK_N		BIT(1)
+#define QCA956X_SGMII_RESET_RX_125M_N		BIT(2)
+#define QCA956X_SGMII_RESET_TX_125M_N		BIT(3)
+#define QCA956X_SGMII_RESET_HW_RX_125M_N	BIT(4)
+
+#define QCA956X_SGMII_SERDES_CDR_BW_MASK	0x3
+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT	1
+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK	0x7
+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT	4
+#define QCA956X_SGMII_SERDES_PLL_BW		BIT(8)
+#define QCA956X_SGMII_SERDES_VCO_FAST		BIT(9)
+#define QCA956X_SGMII_SERDES_VCO_SLOW		BIT(10)
+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS	BIT(15)
+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT	BIT(16)
+#define QCA956X_SGMII_SERDES_FIBER_SDO		BIT(17)
+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT	27
+#define QCA956X_SGMII_SERDES_VCO_REG_MASK	0xf
+
+#define QCA956X_MR_AN_CONTROL_AN_ENABLE		BIT(12)
+#define QCA956X_MR_AN_CONTROL_PHY_RESET		BIT(15)
+
+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT	0
+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK	0x7
+
 #endif /* __ASM_MACH_AR71XX_REGS_H */

arch/mips/include/asm/mach-ath79/ath79.h

@@ -32,8 +32,11 @@ enum ath79_soc_type {
 	ATH79_SOC_AR9341,
 	ATH79_SOC_AR9342,
 	ATH79_SOC_AR9344,
+	ATH79_SOC_QCA9533,
 	ATH79_SOC_QCA9556,
 	ATH79_SOC_QCA9558,
+	ATH79_SOC_TP9343,
+	ATH79_SOC_QCA956X,
 };
 
 extern enum ath79_soc_type ath79_soc;
@@ -100,6 +103,16 @@ static inline int soc_is_ar934x(void)
 	return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
 }
 
+static inline int soc_is_qca9533(void)
+{
+	return ath79_soc == ATH79_SOC_QCA9533;
+}
+
+static inline int soc_is_qca953x(void)
+{
+	return soc_is_qca9533();
+}
+
 static inline int soc_is_qca9556(void)
 {
 	return ath79_soc == ATH79_SOC_QCA9556;
@@ -115,6 +128,26 @@ static inline int soc_is_qca955x(void)
 	return soc_is_qca9556() || soc_is_qca9558();
 }
 
+static inline int soc_is_tp9343(void)
+{
+	return ath79_soc == ATH79_SOC_TP9343;
+}
+
+static inline int soc_is_qca9561(void)
+{
+	return ath79_soc == ATH79_SOC_QCA956X;
+}
+
+static inline int soc_is_qca9563(void)
+{
+	return ath79_soc == ATH79_SOC_QCA956X;
+}
+
+static inline int soc_is_qca956x(void)
+{
+	return soc_is_qca9561() || soc_is_qca9563();
+}
+
 void ath79_ddr_wb_flush(unsigned int reg);
 void ath79_ddr_set_pci_windows(void);
 
@@ -134,6 +167,7 @@ static inline u32 ath79_pll_rr(unsigned reg)
 static inline void ath79_reset_wr(unsigned reg, u32 val)
 {
 	__raw_writel(val, ath79_reset_base + reg);
+	(void) __raw_readl(ath79_reset_base + reg); /* flush */
 }
 
 static inline u32 ath79_reset_rr(unsigned reg)

arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h

@@ -36,6 +36,7 @@
 #define cpu_has_mdmx		0
 #define cpu_has_mips3d		0
 #define cpu_has_smartmips	0
+#define cpu_has_rixi		0
 
 #define cpu_has_mips32r1	1
 #define cpu_has_mips32r2	1
@@ -43,6 +44,7 @@
 #define cpu_has_mips64r2	0
 
 #define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
 
 #define cpu_has_64bits		0
 #define cpu_has_64bit_zero_reg	0
@@ -51,5 +53,9 @@
 
 #define cpu_dcache_line_size()	32
 #define cpu_icache_line_size()	32
+#define cpu_has_vtag_icache	0
+#define cpu_has_dc_aliases	1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_pindexed_dcache	0
 
 #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-bmips/dma-coherence.h

@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2009 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_MACH_BMIPS_DMA_COHERENCE_H
-#define __ASM_MACH_BMIPS_DMA_COHERENCE_H
-
-#include <asm/bmips.h>
-#include <asm/cpu-type.h>
-#include <asm/cpu.h>
-
-struct device;
-
-extern dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size);
-extern dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page);
-extern unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr);
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#define plat_post_dma_flush	bmips_post_dma_flush
-
-#endif /* __ASM_MACH_BMIPS_DMA_COHERENCE_H */

arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h

@@ -1,79 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- *
- * Similar to mach-generic/dma-coherence.h except
- * plat_device_is_coherent hard coded to return 1.
- *
- */
-#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-
-#include <linux/bug.h>
-
-struct device;
-
-extern void octeon_pci_dma_init(void);
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	BUG();
-	return 0;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	BUG();
-	return 0;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	BUG();
-	return 0;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	BUG();
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
-
-struct dma_map_ops;
-extern const struct dma_map_ops *octeon_pci_dma_map_ops;
-extern char *octeon_swiotlb;
-
-#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */

arch/mips/include/asm/mach-generic/dma-coherence.h

@@ -1,73 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	return virt_to_phys(addr);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return page_to_phys(page);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_PERDEV_COHERENT
-	return dev->archdata.dma_coherent;
-#else
-	switch (coherentio) {
-	default:
-	case IO_COHERENCE_DEFAULT:
-		return hw_coherentio;
-	case IO_COHERENCE_ENABLED:
-		return 1;
-	case IO_COHERENCE_DISABLED:
-		return 0;
-	}
-#endif
-}
-
-#ifndef plat_post_dma_flush
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-#endif
-
-#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */

arch/mips/include/asm/mach-generic/kmalloc.h

@@ -2,8 +2,7 @@
 #ifndef __ASM_MACH_GENERIC_KMALLOC_H
 #define __ASM_MACH_GENERIC_KMALLOC_H
 
-
+#ifdef CONFIG_DMA_NONCOHERENT
-#ifndef CONFIG_DMA_COHERENT
 /*
  * Total overkill for most systems but need as a safe default.
  * Set this one if any device in the system might do non-coherent DMA.

arch/mips/include/asm/mach-generic/spaces.h

@@ -17,9 +17,13 @@
 /*
  * This gives the physical RAM offset.
  */
-#ifndef PHYS_OFFSET
+#ifndef __ASSEMBLY__
-#define PHYS_OFFSET		_AC(0, UL)
+# if defined(CONFIG_MIPS_AUTO_PFN_OFFSET)
-#endif
+#  define PHYS_OFFSET		((unsigned long)PFN_PHYS(ARCH_PFN_OFFSET))
+# elif !defined(PHYS_OFFSET)
+#  define PHYS_OFFSET		_AC(0, UL)
+# endif
+#endif /* __ASSEMBLY__ */
 
 #ifdef CONFIG_32BIT
 #ifdef CONFIG_KVM_GUEST

arch/mips/include/asm/mach-ip27/dma-coherence.h

@@ -1,70 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
-#define __ASM_MACH_IP27_DMA_COHERENCE_H
-
-#include <asm/pci/bridge.h>
-
-#define pdev_to_baddr(pdev, addr) \
-	(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
-#define dev_to_baddr(dev, addr) \
-	pdev_to_baddr(to_pci_dev(dev), (addr))
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
-
-	return pa;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr & ~(0xffUL << 56);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;		/* IP27 non-coherent mode is unsupported */
-}
-
-#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */

arch/mips/include/asm/mach-ip32/dma-coherence.h

@@ -1,92 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
-#define __ASM_MACH_IP32_DMA_COHERENCE_H
-
-#include <asm/ip32/crime.h>
-
-struct device;
-
-/*
- * Few notes.
- * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
- * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
- *    native-endian)
- * 3. All other devices see memory as one big chunk at 0x40000000
- * 4. Non-PCI devices will pass NULL as struct device*
- *
- * Thus we translate differently, depending on device.
- */
-
-#define RAM_OFFSET_MASK 0x3fffffffUL
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa;
-
-	pa = page_to_phys(page) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-/* This is almost certainly wrong but it's what dma-ip32.c used to use	*/
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	unsigned long addr = dma_addr & RAM_OFFSET_MASK;
-
-	if (dma_addr >= 256*1024*1024)
-		addr += CRIME_HI_MEM_BASE;
-
-	return addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;		/* IP32 is non-coherent */
-}
-
-#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */

arch/mips/include/asm/mach-jazz/dma-coherence.h

@@ -1,60 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
-#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
-
-#include <asm/jazzdma.h>
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return vdma_alloc(virt_to_phys(addr), size);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return vdma_alloc(page_to_phys(page), PAGE_SIZE);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return vdma_log2phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	vdma_free(dma_addr);
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */

arch/mips/include/asm/mach-loongson64/dma-coherence.h

@@ -1,93 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-extern dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-extern phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, virt_to_phys(addr));
-#else
-	return virt_to_phys(addr) | 0x80000000;
-#endif
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, page_to_phys(page));
-#else
-	return page_to_phys(page) | 0x80000000;
-#endif
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
-	return __dma_to_phys(dev, dma_addr);
-#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_NONCOHERENT
-	return 0;
-#else
-	return 1;
-#endif /* CONFIG_DMA_NONCOHERENT */
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */

arch/mips/include/asm/mach-loongson64/kernel-entry-init.h

@@ -19,18 +19,18 @@
 	.set	push
 	.set	mips64
 	/* Set LPA on LOONGSON3 config3 */
-	mfc0	t0, $16, 3
+	mfc0	t0, CP0_CONFIG3
 	or	t0, (0x1 << 7)
-	mtc0	t0, $16, 3
+	mtc0	t0, CP0_CONFIG3
 	/* Set ELPA on LOONGSON3 pagegrain */
-	mfc0	t0, $5, 1
+	mfc0	t0, CP0_PAGEGRAIN
 	or	t0, (0x1 << 29)
-	mtc0	t0, $5, 1
+	mtc0	t0, CP0_PAGEGRAIN
 #ifdef CONFIG_LOONGSON3_ENHANCEMENT
 	/* Enable STFill Buffer */
-	mfc0	t0, $16, 6
+	mfc0	t0, CP0_CONFIG6
 	or	t0, 0x100
-	mtc0	t0, $16, 6
+	mtc0	t0, CP0_CONFIG6
 #endif
 	_ehb
 	.set	pop
@@ -45,18 +45,18 @@
 	.set	push
 	.set	mips64
 	/* Set LPA on LOONGSON3 config3 */
-	mfc0	t0, $16, 3
+	mfc0	t0, CP0_CONFIG3
 	or	t0, (0x1 << 7)
-	mtc0	t0, $16, 3
+	mtc0	t0, CP0_CONFIG3
 	/* Set ELPA on LOONGSON3 pagegrain */
-	mfc0	t0, $5, 1
+	mfc0	t0, CP0_PAGEGRAIN
 	or	t0, (0x1 << 29)
-	mtc0	t0, $5, 1
+	mtc0	t0, CP0_PAGEGRAIN
 #ifdef CONFIG_LOONGSON3_ENHANCEMENT
 	/* Enable STFill Buffer */
-	mfc0	t0, $16, 6
+	mfc0	t0, CP0_CONFIG6
 	or	t0, 0x100
-	mtc0	t0, $16, 6
+	mtc0	t0, CP0_CONFIG6
 #endif
 	_ehb
 	.set	pop

arch/mips/include/asm/mach-pic32/spaces.h

@@ -16,7 +16,6 @@
 
 #ifdef CONFIG_PIC32MZDA
 #define PHYS_OFFSET	_AC(0x08000000, UL)
-#define UNCAC_BASE	_AC(0xa8000000, UL)
 #endif
 
 #include <asm/mach-generic/spaces.h>

arch/mips/include/asm/mipsregs.h

@@ -16,6 +16,7 @@
 #include <linux/linkage.h>
 #include <linux/types.h>
 #include <asm/hazards.h>
+#include <asm/isa-rev.h>
 #include <asm/war.h>
 
 /*
@@ -51,6 +52,7 @@
 #define CP0_GLOBALNUMBER $3, 1
 #define CP0_CONTEXT $4
 #define CP0_PAGEMASK $5
+#define CP0_PAGEGRAIN $5, 1
 #define CP0_SEGCTL0 $5, 2
 #define CP0_SEGCTL1 $5, 3
 #define CP0_SEGCTL2 $5, 4
@@ -77,6 +79,7 @@
 #define CP0_CONFIG $16
 #define CP0_CONFIG3 $16, 3
 #define CP0_CONFIG5 $16, 5
+#define CP0_CONFIG6 $16, 6
 #define CP0_LLADDR $17
 #define CP0_WATCHLO $18
 #define CP0_WATCHHI $19
@@ -1481,32 +1484,38 @@ do {									\
 
 #define __write_64bit_c0_split(source, sel, val)			\
 do {									\
-	unsigned long long __tmp;					\
+	unsigned long long __tmp = (val);				\
 	unsigned long __flags;						\
 									\
 	local_irq_save(__flags);					\
-	if (sel == 0)							\
+	if (MIPS_ISA_REV >= 2)						\
+		__asm__ __volatile__(					\
+			".set\tpush\n\t"				\
+			".set\t" MIPS_ISA_LEVEL "\n\t"			\
+			"dins\t%L0, %M0, 32, 32\n\t"			\
+			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
+			".set\tpop"					\
+			: "+r" (__tmp));				\
+	else if (sel == 0)						\
 		__asm__ __volatile__(					\
 			".set\tmips64\n\t"				\
-			"dsll\t%L0, %L1, 32\n\t"			\
+			"dsll\t%L0, %L0, 32\n\t"			\
 			"dsrl\t%L0, %L0, 32\n\t"			\
-			"dsll\t%M0, %M1, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
 			"or\t%L0, %L0, %M0\n\t"				\
 			"dmtc0\t%L0, " #source "\n\t"			\
 			".set\tmips0"					\
-			: "=&r,r" (__tmp)				\
+			: "+r" (__tmp));				\
-			: "r,0" (val));					\
 	else								\
 		__asm__ __volatile__(					\
 			".set\tmips64\n\t"				\
-			"dsll\t%L0, %L1, 32\n\t"			\
+			"dsll\t%L0, %L0, 32\n\t"			\
 			"dsrl\t%L0, %L0, 32\n\t"			\
-			"dsll\t%M0, %M1, 32\n\t"			\
+			"dsll\t%M0, %M0, 32\n\t"			\
 			"or\t%L0, %L0, %M0\n\t"				\
 			"dmtc0\t%L0, " #source ", " #sel "\n\t"		\
 			".set\tmips0"					\
-			: "=&r,r" (__tmp)				\
+			: "+r" (__tmp));				\
-			: "r,0" (val));					\
 	local_irq_restore(__flags);					\
 } while (0)
 

arch/mips/include/asm/mmu_context.h

@@ -126,8 +126,6 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	for_each_possible_cpu(i)
 		cpu_context(i, mm) = 0;
 
-	atomic_set(&mm->context.fp_mode_switching, 0);
-
 	mm->context.bd_emupage_allocmap = NULL;
 	spin_lock_init(&mm->context.bd_emupage_lock);
 	init_waitqueue_head(&mm->context.bd_emupage_queue);

arch/mips/include/asm/netlogic/xlr/fmn.h

@@ -301,8 +301,6 @@ static inline int nlm_fmn_send(unsigned int size, unsigned int code,
 	for (i = 0; i < 8; i++) {
 		nlm_msgsnd(dest);
 		status = nlm_read_c2_status0();
-		if ((status & 0x2) == 1)
-			pr_info("Send pending fail!\n");
 		if ((status & 0x4) == 0)
 			return 0;
 	}

arch/mips/include/asm/octeon/cvmx-asxx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -55,6 +55,8 @@
 #define CVMX_ASXX_TX_HI_WATERX(offset, block_id) (CVMX_ADD_IO_SEG(0x00011800B0000080ull) + (((offset) & 3) + ((block_id) & 1) * 0x1000000ull) * 8)
 #define CVMX_ASXX_TX_PRT_EN(block_id) (CVMX_ADD_IO_SEG(0x00011800B0000008ull) + ((block_id) & 1) * 0x8000000ull)
 
+void __cvmx_interrupt_asxx_enable(int block);
+
 union cvmx_asxx_gmii_rx_clk_set {
 	uint64_t u64;
 	struct cvmx_asxx_gmii_rx_clk_set_s {

arch/mips/include/asm/octeon/cvmx-gmxx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -2070,6 +2070,8 @@ static inline uint64_t CVMX_GMXX_XAUI_EXT_LOOPBACK(unsigned long block_id)
 	return CVMX_ADD_IO_SEG(0x0001180008000540ull) + (block_id) * 0x8000000ull;
 }
 
+void __cvmx_interrupt_gmxx_enable(int interface);
+
 union cvmx_gmxx_bad_reg {
 	uint64_t u64;
 	struct cvmx_gmxx_bad_reg_s {

arch/mips/include/asm/octeon/cvmx-pcsx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -334,6 +334,8 @@ static inline uint64_t CVMX_PCSX_TX_RXX_POLARITY_REG(unsigned long offset, unsig
 	return CVMX_ADD_IO_SEG(0x00011800B0001048ull) + ((offset) + (block_id) * 0x20000ull) * 1024;
 }
 
+void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
+
 union cvmx_pcsx_anx_adv_reg {
 	uint64_t u64;
 	struct cvmx_pcsx_anx_adv_reg_s {

arch/mips/include/asm/octeon/cvmx-pcsxx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -268,6 +268,8 @@ static inline uint64_t CVMX_PCSXX_TX_RX_STATES_REG(unsigned long block_id)
 	return CVMX_ADD_IO_SEG(0x00011800B0000830ull) + (block_id) * 0x1000000ull;
 }
 
+void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
+
 union cvmx_pcsxx_10gbx_status_reg {
 	uint64_t u64;
 	struct cvmx_pcsxx_10gbx_status_reg_s {

arch/mips/include/asm/octeon/cvmx-spxx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -45,6 +45,8 @@
 #define CVMX_SPXX_TPA_SEL(block_id) (CVMX_ADD_IO_SEG(0x0001180090000328ull) + ((block_id) & 1) * 0x8000000ull)
 #define CVMX_SPXX_TRN4_CTL(block_id) (CVMX_ADD_IO_SEG(0x0001180090000360ull) + ((block_id) & 1) * 0x8000000ull)
 
+void __cvmx_interrupt_spxx_int_msk_enable(int index);
+
 union cvmx_spxx_bckprs_cnt {
 	uint64_t u64;
 	struct cvmx_spxx_bckprs_cnt_s {

arch/mips/include/asm/octeon/cvmx-stxx-defs.h

@@ -4,7 +4,7 @@
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
- * Copyright (c) 2003-2012 Cavium Networks
+ * Copyright (C) 2003-2018 Cavium, Inc.
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
@@ -45,6 +45,8 @@
 #define CVMX_STXX_STAT_CTL(block_id) (CVMX_ADD_IO_SEG(0x0001180090000638ull) + ((block_id) & 1) * 0x8000000ull)
 #define CVMX_STXX_STAT_PKT_XMT(block_id) (CVMX_ADD_IO_SEG(0x0001180090000640ull) + ((block_id) & 1) * 0x8000000ull)
 
+void __cvmx_interrupt_stxx_int_msk_enable(int index);
+
 union cvmx_stxx_arb_ctl {
 	uint64_t u64;
 	struct cvmx_stxx_arb_ctl_s {

arch/mips/include/asm/octeon/octeon.h

@@ -279,13 +279,12 @@ union octeon_cvmemctl {
 	} s;
 };
 
-extern void octeon_write_lcd(const char *s);
 extern void octeon_check_cpu_bist(void);
-extern int octeon_get_boot_uart(void);
 
-struct uart_port;
+int octeon_prune_device_tree(void);
-extern unsigned int octeon_serial_in(struct uart_port *, int);
+extern const char __appended_dtb;
-extern void octeon_serial_out(struct uart_port *, int, int);
+extern const char __dtb_octeon_3xxx_begin;
+extern const char __dtb_octeon_68xx_begin;
 
 /**
  * Write a 32bit value to the Octeon NPI register space

arch/mips/include/asm/octeon/pci-octeon.h

@@ -63,4 +63,7 @@ enum octeon_dma_bar_type {
  */
 extern enum octeon_dma_bar_type octeon_dma_bar_type;
 
+void octeon_pci_dma_init(void);
+extern char *octeon_swiotlb;
+
 #endif

arch/mips/include/asm/page.h

@@ -80,7 +80,12 @@ extern void build_copy_page(void);
  * used in our early mem init code for all memory models.
  * So always define it.
  */
-#define ARCH_PFN_OFFSET		PFN_UP(PHYS_OFFSET)
+#ifdef CONFIG_MIPS_AUTO_PFN_OFFSET
+extern unsigned long ARCH_PFN_OFFSET;
+# define ARCH_PFN_OFFSET	ARCH_PFN_OFFSET
+#else
+# define ARCH_PFN_OFFSET	PFN_UP(PHYS_OFFSET)
+#endif
 
 extern void clear_page(void * page);
 extern void copy_page(void * to, void * from);
@@ -252,8 +257,8 @@ extern int __virt_addr_valid(const volatile void *kaddr);
 	 ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define UNCAC_ADDR(addr)	(UNCAC_BASE + __pa(addr))
-#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
+#define CAC_ADDR(addr)		((unsigned long)__va((addr) - UNCAC_BASE))
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>

arch/mips/include/asm/processor.h

@@ -141,7 +141,7 @@ struct mips_fpu_struct {
 
 #define NUM_DSP_REGS   6
 
-typedef __u32 dspreg_t;
+typedef unsigned long dspreg_t;
 
 struct mips_dsp_state {
 	dspreg_t	dspr[NUM_DSP_REGS];
@@ -386,7 +386,20 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
 #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
 
+#ifdef CONFIG_CPU_LOONGSON3
+/*
+ * Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a
+ * tight read loop is executed, because reads take priority over writes & the
+ * hardware (incorrectly) doesn't ensure that writes will eventually occur.
+ *
+ * Since spin loops of any kind should have a cpu_relax() in them, force an SFB
+ * flush from cpu_relax() such that any pending writes will become visible as
+ * expected.
+ */
+#define cpu_relax()	smp_mb()
+#else
 #define cpu_relax()	barrier()
+#endif
 
 /*
  * Return_address is a replacement for __builtin_return_address(count)