PCI/ATS: Add pci_prg_resp_pasid_required() interface.

Return the PRG Response PASID Required bit in the Page Request
Status Register.

As per PCIe spec r4.0, sec 10.5.2.3, if this bit is Set, the device
expects a PASID TLP Prefix on PRG Response Messages when the
corresponding Page Requests had a PASID TLP Prefix. If Clear, the device
does not expect PASID TLP Prefixes on any PRG Response Message, and the
device behavior is undefined if the device receives a PRG Response Message
with a PASID TLP Prefix. Also the device behavior is undefined if this
bit is Set and the device receives a PRG Response Message with no PASID TLP
Prefix when the corresponding Page Requests had a PASID TLP Prefix.

This function will be used by drivers like IOMMU, if it is required to
check the status of the PRG Response PASID Required bit before enabling
the PASID support of the device.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This commit is contained in:
Kuppuswamy Sathyanarayanan
2019-02-19 11:04:51 -08:00
committed by Joerg Roedel
parent 3f0c625c6a
commit e5567f5f67
3 changed files with 36 additions and 0 deletions

View File

@@ -880,6 +880,7 @@
#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */
#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */
#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */
#define PCI_PRI_STATUS_PASID 0x8000 /* PRG Response PASID Required */
#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */
#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */
#define PCI_EXT_CAP_PRI_SIZEOF 16