Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris: - refactor m25p80.c driver for use as a general SPI NOR framework for other drivers which may speak to SPI NOR flash without providing full SPI support (i.e., not part of drivers/spi/) - new Freescale QuadSPI driver (utilizing new SPI NOR framework) - updates for the STMicro "FSM" SPI NOR driver - fix sync/flush behavior on mtd_blkdevs - fixup subpage write support on a few NAND drivers - correct the MTD OOB test for odd-sized OOB areas - add BCH-16 support for OMAP NAND - fix warnings and trivial refactoring - utilize new ECC DT bindings in pxa3xx NAND driver - new LPDDR NVM driver - address a few assorted bugs caught by Coverity - add new imx6sx support for GPMI NAND - use a bounce buffer for NAND when non-DMA-able buffers are used * tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits) mtd: gpmi: add gpmi support for imx6sx mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE mtd: bf5xx_nand: use the managed version of kzalloc mtd: pxa3xx_nand: make the driver work on big-endian systems mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error mtd: nand: r852: correct write_buf loop bounds mtd: nand_bbt: handle error case for nand_create_badblock_pattern() mtd: nand_bbt: remove unused variable mtd: maps: sc520cdp: fix warnings mtd: slram: fix unused variable warning mtd: pfow: remove unused variable mtd: lpddr: fix Kconfig dependency, for I/O accessors mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling mtd: nand: Warn the user if the selected ECC strength is too weak mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? mtd: nand: omap: add support for BCH16_ECC - NAND driver updates mtd: nand: omap: add support for BCH16_ECC - ELM driver updates mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates ...
This commit is contained in:
@@ -21,6 +21,7 @@
|
||||
enum bch_ecc {
|
||||
BCH4_ECC = 0,
|
||||
BCH8_ECC,
|
||||
BCH16_ECC,
|
||||
};
|
||||
|
||||
/* ELM support 8 error syndrome process */
|
||||
@@ -38,7 +39,7 @@ struct elm_errorvec {
|
||||
bool error_reported;
|
||||
bool error_uncorrectable;
|
||||
int error_count;
|
||||
int error_loc[ERROR_VECTOR_MAX];
|
||||
int error_loc[16];
|
||||
};
|
||||
|
||||
void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
|
||||
|
@@ -31,6 +31,8 @@ enum omap_ecc {
|
||||
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
|
||||
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
|
||||
OMAP_ECC_BCH8_CODE_HW,
|
||||
/* 16-bit ECC calculation by GPMC, Error detection by ELM */
|
||||
OMAP_ECC_BCH16_CODE_HW,
|
||||
};
|
||||
|
||||
struct gpmc_nand_regs {
|
||||
@@ -50,6 +52,9 @@ struct gpmc_nand_regs {
|
||||
void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
|
||||
void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
|
||||
void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
|
||||
void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER];
|
||||
void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
|
||||
void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
|
||||
};
|
||||
|
||||
struct omap_nand_platform_data {
|
||||
|
@@ -58,6 +58,9 @@ struct pxa3xx_nand_platform_data {
|
||||
/* use an flash-based bad block table */
|
||||
bool flash_bbt;
|
||||
|
||||
/* requested ECC strength and ECC step size */
|
||||
int ecc_strength, ecc_step_size;
|
||||
|
||||
const struct mtd_partition *parts[NUM_CHIP_SELECT];
|
||||
unsigned int nr_parts[NUM_CHIP_SELECT];
|
||||
|
||||
|
Reference in New Issue
Block a user