Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.

  The executive summary:

   - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
   - Avoid useless rebuilds for zboot.
   - jz4780: Add NEMC, BCH and NAND device tree nodes
   - Initial support for the MicroChip's DT platform.  As all the device
     drivers are missing this is still of limited use.
   - Some Loongson3 cleanups.
   - The unavoidable whitespace polishing.
   - Reduce clock skew when synchronizing the CPU cycle counters on CPU
     startup.
   - Add MIPS R6 fixes.
   - Lots of cleanups across arch/mips as fallout from KVM.
   - Lots of minor fixes and changes for IEEE 754-2008 support to the
     FPU emulator / fp-assist software.
   - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
   - Support SMP on BCM63168"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
  MIPS: zboot: Add support for serial debug using the PROM
  MIPS: zboot: Avoid useless rebuilds
  MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
  MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
  MIPS: bcm963xx: Update bcm_tag field image_sequence
  MIPS: bcm963xx: Move extended flash address to bcm_tag header file
  MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
  MIPS: bcm63xx: nvram: Use nvram structure definition from header file
  MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
  MAINTAINERS: Add KVM for MIPS entry
  MIPS: KVM: Add missing newline to kvm_err()
  MIPS: Move KVM specific opcodes into asm/inst.h
  MIPS: KVM: Use cacheops.h definitions
  MIPS: Break down cacheops.h definitions
  MIPS: Use EXCCODE_ constants with set_except_vector()
  MIPS: Update trap codes
  MIPS: Move Cause.ExcCode trap codes to mipsregs.h
  MIPS: KVM: Make kvm_mips_{init,exit}() static
  MIPS: KVM: Refactor added offsetof()s
  MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
  ...

Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt

@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+  source connected to this controller. The value shall be 2 and interrupt
+  descriptor shall have the following format:
+
+	<hw_irq irq_type>
+
+  hw_irq - represents the hardware interrupt number as in the data sheet.
+  irq_type - is used to describe the type and polarity of an interrupt. For
+  internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+  IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+  IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+  polarity configuration. This array corresponds to the bits in the INTCON
+  SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+	compatible = "microchip,pic32mzda-evic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x1f810000 0x1000>;
+	microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+	...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	...
+};