clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE

DRAM frequency switches are executed in firmware and can change the
configuration of the DRAM PLL outside linux. Mark these CLKs with
CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and
recalculate rates.

In current DRAM frequency tables on 8mm/8mn only the maximum frequency
uses the PLL so it's always configured in the same way. However reading
back the PLL configuration is the correct behavior and allows additional
setpoints in the future.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

drivers/clk/imx/clk.h

@@ -52,6 +52,7 @@ struct imx_pll14xx_clk {
 
 extern struct imx_pll14xx_clk imx_1416x_pll;
 extern struct imx_pll14xx_clk imx_1443x_pll;
+extern struct imx_pll14xx_clk imx_1443x_dram_pll;
 
 #define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
 	imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk