net: convert print_mac to %pM

This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/pcmcia/3c574_cs.c

@@ -345,7 +345,6 @@ static int tc574_config(struct pcmcia_device *link)
 	__be16 *phys_addr;
 	char *cardname;
 	__u32 config;
-	DECLARE_MAC_BUF(mac);
 
 	phys_addr = (__be16 *)dev->dev_addr;
 
@@ -463,9 +462,9 @@ static int tc574_config(struct pcmcia_device *link)
 	strcpy(lp->node.dev_name, dev->name);
 
 	printk(KERN_INFO "%s: %s at io %#3lx, irq %d, "
-	       "hw_addr %s.\n",
+	       "hw_addr %pM.\n",
 	       dev->name, cardname, dev->base_addr, dev->irq,
-	       print_mac(mac, dev->dev_addr));
+	       dev->dev_addr);
 	printk(" %dK FIFO split %s Rx:Tx, %sMII interface.\n",
 		   8 << config & Ram_size,
 		   ram_split[(config & Ram_split) >> Ram_split_shift],

drivers/net/pcmcia/3c589_cs.c

@@ -255,7 +255,6 @@ static int tc589_config(struct pcmcia_device *link)
     int last_fn, last_ret, i, j, multi = 0, fifo;
     unsigned int ioaddr;
     char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
-    DECLARE_MAC_BUF(mac);
     
     DEBUG(0, "3c589_config(0x%p)\n", link);
 
@@ -333,9 +332,9 @@ static int tc589_config(struct pcmcia_device *link)
     strcpy(lp->node.dev_name, dev->name);
 
     printk(KERN_INFO "%s: 3Com 3c%s, io %#3lx, irq %d, "
-	   "hw_addr %s\n",
+	   "hw_addr %pM\n",
 	   dev->name, (multi ? "562" : "589"), dev->base_addr, dev->irq,
-	   print_mac(mac, dev->dev_addr));
+	   dev->dev_addr);
     printk(KERN_INFO "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
 	   (fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
 	   if_names[dev->if_port]);

drivers/net/pcmcia/axnet_cs.c

@@ -321,7 +321,6 @@ static int axnet_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     axnet_dev_t *info = PRIV(dev);
     int i, j, last_ret, last_fn;
-    DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "axnet_config(0x%p)\n", link);
 
@@ -397,10 +396,10 @@ static int axnet_config(struct pcmcia_device *link)
     strcpy(info->node.dev_name, dev->name);
 
     printk(KERN_INFO "%s: Asix AX88%d90: io %#3lx, irq %d, "
-	   "hw_addr %s\n",
+	   "hw_addr %pM\n",
 	   dev->name, ((info->flags & IS_AX88790) ? 7 : 1),
 	   dev->base_addr, dev->irq,
-	   print_mac(mac, dev->dev_addr));
+	   dev->dev_addr);
     if (info->phy_id != -1) {
 	DEBUG(0, "  MII transceiver at index %d, status %x.\n", info->phy_id, j);
     } else {

drivers/net/pcmcia/fmvj18x_cs.c

@@ -348,7 +348,6 @@ static int fmvj18x_config(struct pcmcia_device *link)
     cardtype_t cardtype;
     char *card_name = "unknown";
     u_char *node_id;
-    DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "fmvj18x_config(0x%p)\n", link);
 
@@ -539,9 +538,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
     /* print current configuration */
     printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, "
-	   "hw_addr %s\n",
+	   "hw_addr %pM\n",
 	   dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2", 
-	   dev->base_addr, dev->irq, print_mac(mac, dev->dev_addr));
+	   dev->base_addr, dev->irq, dev->dev_addr);
 
     return 0;
     

drivers/net/pcmcia/nmclan_cs.c

@@ -659,7 +659,6 @@ static int nmclan_config(struct pcmcia_device *link)
   u_char buf[64];
   int i, last_ret, last_fn;
   unsigned int ioaddr;
-  DECLARE_MAC_BUF(mac);
 
   DEBUG(0, "nmclan_config(0x%p)\n", link);
 
@@ -719,9 +718,9 @@ static int nmclan_config(struct pcmcia_device *link)
   strcpy(lp->node.dev_name, dev->name);
 
   printk(KERN_INFO "%s: nmclan: port %#3lx, irq %d, %s port,"
-	 " hw_addr %s\n",
+	 " hw_addr %pM\n",
 	 dev->name, dev->base_addr, dev->irq, if_names[dev->if_port],
-	 print_mac(mac, dev->dev_addr));
+	 dev->dev_addr);
   return 0;
 
 cs_failed:

drivers/net/pcmcia/pcnet_cs.c

@@ -554,7 +554,6 @@ static int pcnet_config(struct pcmcia_device *link)
     int last_ret, last_fn, start_pg, stop_pg, cm_offset;
     int has_shmem = 0;
     hw_info_t *local_hw_info;
-    DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "pcnet_config(0x%p)\n", link);
 
@@ -675,7 +674,7 @@ static int pcnet_config(struct pcmcia_device *link)
 	printk (" mem %#5lx,", dev->mem_start);
     if (info->flags & HAS_MISC_REG)
 	printk(" %s xcvr,", if_names[dev->if_port]);
-    printk(" hw_addr %s\n", print_mac(mac, dev->dev_addr));
+    printk(" hw_addr %pM\n", dev->dev_addr);
     return 0;
 
 cs_failed:

drivers/net/pcmcia/smc91c92_cs.c

@@ -949,7 +949,6 @@ static int smc91c92_config(struct pcmcia_device *link)
     int i, j, rev;
     unsigned int ioaddr;
     u_long mir;
-    DECLARE_MAC_BUF(mac);
 
     DEBUG(0, "smc91c92_config(0x%p)\n", link);
 
@@ -1062,9 +1061,9 @@ static int smc91c92_config(struct pcmcia_device *link)
     strcpy(smc->node.dev_name, dev->name);
 
     printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
-	   "hw_addr %s\n",
+	   "hw_addr %pM\n",
 	   dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq,
-	   print_mac(mac, dev->dev_addr));
+	   dev->dev_addr);
 
     if (rev > 0) {
 	if (mir & 0x3ff)

drivers/net/pcmcia/xirc2ps_cs.c

@@ -772,7 +772,6 @@ xirc2ps_config(struct pcmcia_device * link)
     int err, i;
     u_char buf[64];
     cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
-    DECLARE_MAC_BUF(mac);
 
     local->dingo_ccr = NULL;
 
@@ -1051,9 +1050,9 @@ xirc2ps_config(struct pcmcia_device * link)
     strcpy(local->node.dev_name, dev->name);
 
     /* give some infos about the hardware */
-    printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %s\n",
+    printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
 	   dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
-	   print_mac(mac, dev->dev_addr));
+	   dev->dev_addr);
 
     return 0;