[SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes

FC and SCSI Discovery Fixes:

- Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI
  and FDISC. (CR 124339)
- Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being
  retried too quickly (CR 124668)
- Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric
  nodes (CR 123924)
- Only retry FDISCs every second and stop retrying after devloss number
  of retries (CR 13939)
- Check to see if vports are unloading before adding them to the vport
  work array. (CR 124996)
- Fixed illegal state transition during driver unload (CR 124191)
- Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002)
- Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and
  above. (CR 126094)
- Clear FCP command bytes that are not used. (CR 126209)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
James Smart
2011-12-13 13:22:17 -05:00
committed by James Bottomley
parent cb69f7decc
commit df9e1b59f9
8 changed files with 75 additions and 19 deletions

View File

@@ -2646,9 +2646,14 @@ lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
struct lpfc_vport *vport = mboxq->vport;
/* VFI not supported on interface type 0, just do the flogi */
if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
/*
* VFI not supported on interface type 0, just do the flogi
* Also continue if the VFI is in use - just use the same one.
*/
if (mboxq->u.mb.mbxStatus &&
(bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
LPFC_SLI_INTF_IF_TYPE_0) &&
mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_MBOX,
"2891 Init VFI mailbox failed 0x%x\n",
@@ -2922,6 +2927,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
{
struct lpfc_vport *vport = phba->pport;
LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
struct Scsi_Host *shost;
int i;
struct lpfc_dmabuf *mp;
int rc;
@@ -2945,6 +2951,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
shost = lpfc_shost_from_vport(vport);
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
@@ -2956,8 +2963,11 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
"1309 Link Up Event npiv not supported in loop "
"topology\n");
/* Get Loop Map information */
if (bf_get(lpfc_mbx_read_top_il, la))
if (bf_get(lpfc_mbx_read_top_il, la)) {
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
spin_unlock_irq(shost->host_lock);
}
vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
i = la->lilpBde64.tus.f.bdeSize;
@@ -3002,11 +3012,13 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
} else {
if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
if (phba->max_vpi && phba->cfg_enable_npiv &&
(phba->sli_rev == 3))
(phba->sli_rev >= LPFC_SLI_REV3))
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
}
vport->fc_myDID = phba->fc_pref_DID;
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
spin_unlock_irq(shost->host_lock);
}
spin_unlock_irq(&phba->hbalock);
@@ -3593,6 +3605,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
@@ -3638,8 +3651,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
* vport discovery */
if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
lpfc_start_fdiscs(phba);
else
else {
shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
spin_unlock_irq(shost->host_lock);
}
lpfc_do_scr_ns_plogi(phba, vport);
}