Merge branch 'devel-stable' into for-next

Conflicts:
	arch/arm/include/asm/atomic.h
	arch/arm/include/asm/hardirq.h
	arch/arm/kernel/smp.c

arch/arm/mm/Kconfig

@@ -952,3 +952,9 @@ config ARCH_HAS_BARRIERS
 	help
 	  This option allows the use of custom mandatory barriers
 	  included via the mach/barriers.h file.
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	help
+	  This option specifies the architecture can support big endian
+	  operation.

arch/arm/mm/abort-ev6.S

@@ -38,9 +38,8 @@ ENTRY(v6_early_abort)
 	bne	do_DataAbort
 	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
 	ldr	r3, [r4]			@ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	rev	r3, r3
-#endif
+ ARM_BE8(rev	r3, r3)
+
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.

arch/arm/mm/alignment.c

@@ -25,6 +25,7 @@
 #include <asm/cp15.h>
 #include <asm/system_info.h>
 #include <asm/unaligned.h>
+#include <asm/opcodes.h>
 
 #include "fault.h"
 
@@ -762,21 +763,25 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
 		fault = probe_kernel_address(ptr, tinstr);
+		tinstr = __mem_to_opcode_thumb16(tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
 				u16 tinst2 = 0;
 				fault = probe_kernel_address(ptr + 1, tinst2);
-				instr = (tinstr << 16) | tinst2;
+				tinst2 = __mem_to_opcode_thumb16(tinst2);
+				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
 				isize = 2;
 				instr = thumb2arm(tinstr);
 			}
 		}
-	} else
+	} else {
 		fault = probe_kernel_address(instrptr, instr);
+		instr = __mem_to_opcode_arm(instr);
+	}
 
 	if (fault) {
 		type = TYPE_FAULT;

arch/arm/mm/idmap.c

@@ -10,6 +10,7 @@
 #include <asm/system_info.h>
 
 pgd_t *idmap_pgd;
+phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
@@ -67,8 +68,9 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 	unsigned long addr, end;
 	unsigned long next;
 
-	addr = virt_to_phys(text_start);
-	end = virt_to_phys(text_end);
+	addr = virt_to_idmap(text_start);
+	end = virt_to_idmap(text_end);
+	pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end);
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
@@ -90,8 +92,6 @@ static int __init init_static_idmap(void)
 	if (!idmap_pgd)
 		return -ENOMEM;
 
-	pr_info("Setting up static identity map for 0x%p - 0x%p\n",
-		__idmap_text_start, __idmap_text_end);
 	identity_mapping_add(idmap_pgd, __idmap_text_start,
 			     __idmap_text_end, 0);
 

arch/arm/mm/mmu.c

@@ -28,6 +28,8 @@
 #include <asm/highmem.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
+#include <asm/procinfo.h>
+#include <asm/memory.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -1315,6 +1317,86 @@ static void __init map_lowmem(void)
 	}
 }
 
+#ifdef CONFIG_ARM_LPAE
+/*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags;
+	unsigned long map_start, map_end;
+	pgd_t *pgd0, *pgdk;
+	pud_t *pud0, *pudk, *pud_start;
+	pmd_t *pmd0, *pmdk;
+	phys_addr_t phys;
+	int i;
+
+	if (!(mdesc->init_meminfo))
+		return;
+
+	/* remap kernel code and data */
+	map_start = init_mm.start_code;
+	map_end   = init_mm.brk;
+
+	/* get a handle on things... */
+	pgd0 = pgd_offset_k(0);
+	pud_start = pud0 = pud_offset(pgd0, 0);
+	pmd0 = pmd_offset(pud0, 0);
+
+	pgdk = pgd_offset_k(map_start);
+	pudk = pud_offset(pgdk, map_start);
+	pmdk = pmd_offset(pudk, map_start);
+
+	mdesc->init_meminfo();
+
+	/* Run the patch stub to update the constants */
+	fixup_pv_table(&__pv_table_begin,
+		(&__pv_table_end - &__pv_table_begin) << 2);
+
+	/*
+	 * Cache cleaning operations for self-modifying code
+	 * We should clean the entries by MVA but running a
+	 * for loop over every pv_table entry pointer would
+	 * just complicate the code.
+	 */
+	flush_cache_louis();
+	dsb();
+	isb();
+
+	/* remap level 1 table */
+	for (i = 0; i < PTRS_PER_PGD; pud0++, i++) {
+		set_pud(pud0,
+			__pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER));
+		pmd0 += PTRS_PER_PMD;
+	}
+
+	/* remap pmds for kernel mapping */
+	phys = __pa(map_start) & PMD_MASK;
+	do {
+		*pmdk++ = __pmd(phys | pmdprot);
+		phys += PMD_SIZE;
+	} while (phys < map_end);
+
+	flush_cache_all();
+	cpu_switch_mm(pgd0, &init_mm);
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_bp_all();
+	local_flush_tlb_all();
+}
+
+#else
+
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	if (mdesc->init_meminfo)
+		mdesc->init_meminfo();
+}
+
+#endif
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.

arch/arm/mm/nommu.c

@@ -295,6 +295,15 @@ void __init sanity_check_meminfo(void)
 	high_memory = __va(end - 1) + 1;
 }
 
+/*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(const struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.

arch/arm/mm/proc-v6.S

@@ -220,9 +220,7 @@ __v6_setup:
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them

arch/arm/mm/proc-v7.S

@@ -367,9 +367,7 @@ __v7_setup:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	orr	r6, r6, #1 << 25		@ big-endian page tables
-#endif
+ ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables
 #ifdef CONFIG_SWP_EMULATE
 	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
 	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"