Merge tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt

@@ -0,0 +1,48 @@
+* X-Powers AXP ADC bindings
+
+Required properties:
+  - compatible: should be one of:
+    - "x-powers,axp209-adc",
+    - "x-powers,axp221-adc",
+    - "x-powers,axp813-adc",
+  - #io-channel-cells: should be 1,
+
+Example:
+
+&axp22x {
+	adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+};
+
+ADC channels and their indexes per variant:
+
+AXP209
+------
+ 0 | acin_v
+ 1 | acin_i
+ 2 | vbus_v
+ 3 | vbus_i
+ 4 | pmic_temp
+ 5 | gpio0_v
+ 6 | gpio1_v
+ 7 | ipsout_v
+ 8 | batt_v
+ 9 | batt_chrg_i
+10 | batt_dischrg_i
+
+AXP22x
+------
+ 0 | pmic_temp
+ 1 | batt_v
+ 2 | batt_chrg_i
+ 3 | batt_dischrg_i
+
+AXP813
+------
+ 0 | pmic_temp
+ 1 | gpio0_v
+ 2 | batt_v
+ 3 | batt_chrg_i
+ 4 | batt_dischrg_i

Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt

@@ -32,6 +32,10 @@ Optional properties:
 		  to "clock" property. Frequency must be a multiple of the rcc
 		  clock frequency. If not, SPI CLKOUT frequency will not be
 		  accurate.
+- pinctrl-names:	Set to "default".
+- pinctrl-0:		List of phandles pointing to pin configuration
+			nodes to set pins in mode of operation for dfsdm
+			on external pin.
 
 Contents of a STM32 DFSDM child nodes:
 --------------------------------------
@@ -68,8 +72,8 @@ Optional properties:
 - st,adc-channel-types:	Single-ended channel input type.
 			- "SPI_R": SPI with data on rising edge (default)
 			- "SPI_F": SPI with data on falling edge
-			- "MANCH_R": manchester codec, rising edge = logic 0
-			- "MANCH_F": manchester codec, falling edge = logic 1
+			- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+			- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
 - st,adc-channel-clk-src: Conversion clock source.
 			  - "CLKIN": external SPI clock (CLKIN x)
 			  - "CLKOUT": internal SPI clock (CLKOUT) (default)

Documentation/devicetree/bindings/iio/potentiometer/ad5272.txt

@@ -0,0 +1,27 @@
+* Analog Devices AD5272 digital potentiometer
+
+The node for this device must be a child node of a I2C controller, hence
+all mandatory properties for your controller must be specified. See directory:
+
+        Documentation/devicetree/bindings/i2c
+
+for more details.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the model:
+			adi,ad5272-020
+			adi,ad5272-050
+			adi,ad5272-100
+			adi,ad5274-020
+			adi,ad5274-100
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+		active low signal to the AD5272.
+
+Example:
+ad5272: potentiometer@2f {
+	reg = <0x2F>;
+	compatible = "adi,ad5272-020";
+	reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/iio/temperature/mlx90632.txt

@@ -0,0 +1,28 @@
+* Melexis MLX90632 contactless Infra Red temperature sensor
+
+Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632
+
+There are various applications for the Infra Red contactless temperature sensor
+and MLX90632 is most suitable for consumer applications where measured object
+temperature is in range between -20 to 200 degrees Celsius with relative error
+of measurement below 1 degree Celsius in object temperature range for
+industrial applications. Since it can operate and measure ambient temperature
+in range of -20 to 85 degrees Celsius it is suitable also for outdoor use.
+
+Be aware that electronics surrounding the sensor can increase ambient
+temperature. MLX90632 can be calibrated to reduce the housing effect via
+already existing EEPROM parameters.
+
+Since measured object emissivity effects Infra Red energy emitted, emissivity
+should be set before requesting the object temperature.
+
+Required properties:
+  - compatible: should be "melexis,mlx90632"
+  - reg: the I2C address of the sensor (default 0x3a)
+
+Example:
+
+mlx90632@3a {
+	compatible = "melexis,mlx90632";
+	reg = <0x3a>;
+};

Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt

@@ -0,0 +1,16 @@
+Broadcom VCHIQ firmware services
+
+Required properties:
+
+- compatible:	Should be "brcm,bcm2835-vchiq"
+- reg:		Physical base address and length of the doorbell register pair
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
+Example:
+
+mailbox@7e00b840 {
+	compatible = "brcm,bcm2835-vchiq";
+	reg = <0x7e00b840 0xf>;
+	interrupts = <0 2>;
+};