Pull cpuidle into test branch

This commit is contained in:
Len Brown
2007-10-10 00:32:13 -04:00
23 changed files with 1901 additions and 109 deletions

View File

@@ -1042,14 +1042,6 @@ static int __init acpi_wake_gpes_always_on_setup(char *str)
__setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
/*
* max_cstate is defined in the base kernel so modules can
* change it w/o depending on the state of the processor module.
*/
unsigned int max_cstate = ACPI_PROCESSOR_MAX_POWER;
EXPORT_SYMBOL(max_cstate);
/*
* Acquire a spinlock.
*

View File

@@ -44,6 +44,7 @@
#include <linux/seq_file.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -1049,11 +1050,13 @@ static int __init acpi_processor_init(void)
return -ENOMEM;
acpi_processor_dir->owner = THIS_MODULE;
result = cpuidle_register_driver(&acpi_idle_driver);
if (result < 0)
goto out_proc;
result = acpi_bus_register_driver(&acpi_processor_driver);
if (result < 0) {
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
return result;
}
if (result < 0)
goto out_cpuidle;
acpi_processor_install_hotplug_notify();
@@ -1062,11 +1065,18 @@ static int __init acpi_processor_init(void)
acpi_processor_ppc_init();
return 0;
out_cpuidle:
cpuidle_unregister_driver(&acpi_idle_driver);
out_proc:
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
return result;
}
static void __exit acpi_processor_exit(void)
{
acpi_processor_ppc_exit();
acpi_thermal_cpufreq_exit();
@@ -1075,6 +1085,8 @@ static void __exit acpi_processor_exit(void)
acpi_bus_unregister_driver(&acpi_processor_driver);
cpuidle_unregister_driver(&acpi_idle_driver);
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
return;

View File

@@ -40,6 +40,7 @@
#include <linux/sched.h> /* need_resched() */
#include <linux/latency.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
@@ -64,14 +65,22 @@ ACPI_MODULE_NAME("processor_idle");
#define ACPI_PROCESSOR_FILE_POWER "power"
#define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
#define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY)
#ifndef CONFIG_CPU_IDLE
#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */
#define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */
static void (*pm_idle_save) (void) __read_mostly;
module_param(max_cstate, uint, 0644);
#else
#define C2_OVERHEAD 1 /* 1us */
#define C3_OVERHEAD 1 /* 1us */
#endif
#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
#ifndef CONFIG_CPU_IDLE
/*
* bm_history -- bit-mask with a bit per jiffy of bus-master activity
* 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
@@ -82,9 +91,10 @@ module_param(nocst, uint, 0000);
static unsigned int bm_history __read_mostly =
(HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
module_param(bm_history, uint, 0644);
/* --------------------------------------------------------------------------
Power Management
-------------------------------------------------------------------------- */
static int acpi_processor_set_power_policy(struct acpi_processor *pr);
#endif
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
@@ -177,6 +187,18 @@ static inline u32 ticks_elapsed(u32 t1, u32 t2)
return ((0xFFFFFFFF - t1) + t2);
}
static inline u32 ticks_elapsed_in_us(u32 t1, u32 t2)
{
if (t2 >= t1)
return PM_TIMER_TICKS_TO_US(t2 - t1);
else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
return PM_TIMER_TICKS_TO_US(((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
else
return PM_TIMER_TICKS_TO_US((0xFFFFFFFF - t1) + t2);
}
#ifndef CONFIG_CPU_IDLE
static void
acpi_processor_power_activate(struct acpi_processor *pr,
struct acpi_processor_cx *new)
@@ -248,6 +270,7 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
}
#endif /* !CONFIG_CPU_IDLE */
#ifdef ARCH_APICTIMER_STOPS_ON_C3
@@ -342,6 +365,7 @@ int acpi_processor_resume(struct acpi_device * device)
return 0;
}
#ifndef CONFIG_CPU_IDLE
static void acpi_processor_idle(void)
{
struct acpi_processor *pr = NULL;
@@ -439,7 +463,7 @@ static void acpi_processor_idle(void)
* an SMP system. We do it here instead of doing it at _CST/P_LVL
* detection phase, to work cleanly with logical CPU hotplug.
*/
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
!pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
cx = &pr->power.states[ACPI_STATE_C1];
#endif
@@ -739,6 +763,7 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr)
return 0;
}
#endif /* !CONFIG_CPU_IDLE */
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
@@ -756,7 +781,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
#ifndef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
* an SMP system.
* an SMP system.
*/
if ((num_online_cpus() > 1) &&
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
@@ -957,7 +982,12 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
* Normalize the C2 latency to expidite policy
*/
cx->valid = 1;
#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
#else
cx->latency_ticks = cx->latency;
#endif
return;
}
@@ -1037,7 +1067,12 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
* use this in our C3 policy
*/
cx->valid = 1;
#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
#else
cx->latency_ticks = cx->latency;
#endif
return;
}
@@ -1102,6 +1137,7 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
pr->power.count = acpi_processor_power_verify(pr);
#ifndef CONFIG_CPU_IDLE
/*
* Set Default Policy
* ------------------
@@ -1113,6 +1149,7 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
result = acpi_processor_set_power_policy(pr);
if (result)
return result;
#endif
/*
* if one state of type C2 or C3 is available, mark this
@@ -1129,35 +1166,6 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
return 0;
}
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
int result = 0;
if (!pr)
return -EINVAL;
if (nocst) {
return -ENODEV;
}
if (!pr->flags.power_setup_done)
return -ENODEV;
/* Fall back to the default idle loop */
pm_idle = pm_idle_save;
synchronize_sched(); /* Relies on interrupts forcing exit from idle. */
pr->flags.power = 0;
result = acpi_processor_get_power_info(pr);
if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
pm_idle = acpi_processor_idle;
return result;
}
/* proc interface */
static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_processor *pr = seq->private;
@@ -1239,6 +1247,35 @@ static const struct file_operations acpi_processor_power_fops = {
.release = single_release,
};
#ifndef CONFIG_CPU_IDLE
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
int result = 0;
if (!pr)
return -EINVAL;
if (nocst) {
return -ENODEV;
}
if (!pr->flags.power_setup_done)
return -ENODEV;
/* Fall back to the default idle loop */
pm_idle = pm_idle_save;
synchronize_sched(); /* Relies on interrupts forcing exit from idle. */
pr->flags.power = 0;
result = acpi_processor_get_power_info(pr);
if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
pm_idle = acpi_processor_idle;
return result;
}
#ifdef CONFIG_SMP
static void smp_callback(void *v)
{
@@ -1261,8 +1298,367 @@ static int acpi_processor_latency_notify(struct notifier_block *b,
static struct notifier_block acpi_processor_latency_notifier = {
.notifier_call = acpi_processor_latency_notify,
};
#endif
#else /* CONFIG_CPU_IDLE */
/**
* acpi_idle_bm_check - checks if bus master activity was detected
*/
static int acpi_idle_bm_check(void)
{
u32 bm_status = 0;
acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
/*
* PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
* the true state of bus mastering activity; forcing us to
* manually check the BMIDEA bit of each IDE channel.
*/
else if (errata.piix4.bmisx) {
if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
|| (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
bm_status = 1;
}
return bm_status;
}
/**
* acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state
* @pr: the processor
* @target: the new target state
*/
static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
struct acpi_processor_cx *target)
{
if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) {
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
pr->flags.bm_rld_set = 0;
}
if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) {
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
pr->flags.bm_rld_set = 1;
}
}
/**
* acpi_idle_do_entry - a helper function that does C2 and C3 type entry
* @cx: cstate data
*/
static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
{
if (cx->space_id == ACPI_CSTATE_FFH) {
/* Call into architectural FFH based C-state */
acpi_processor_ffh_cstate_enter(cx);
} else {
int unused;
/* IO port based C-state */
inb(cx->address);
/* Dummy wait op - must do something useless after P_LVL2 read
because chipsets cannot guarantee that STPCLK# signal
gets asserted in time to freeze execution properly. */
unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
}
/**
* acpi_idle_enter_c1 - enters an ACPI C1 state-type
* @dev: the target CPU
* @state: the state data
*
* This is equivalent to the HALT instruction.
*/
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
pr = processors[smp_processor_id()];
if (unlikely(!pr))
return 0;
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we test
* NEED_RESCHED:
*/
smp_mb();
if (!need_resched())
safe_halt();
current_thread_info()->status |= TS_POLLING;
cx->usage++;
return 0;
}
/**
* acpi_idle_enter_simple - enters an ACPI state without BM handling
* @dev: the target CPU
* @state: the state data
*/
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
u32 t1, t2;
pr = processors[smp_processor_id()];
if (unlikely(!pr))
return 0;
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
local_irq_disable();
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we test
* NEED_RESCHED:
*/
smp_mb();
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
return 0;
}
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
acpi_state_timer_broadcast(pr, cx, 1);
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC could halt in idle, so notify users */
mark_tsc_unstable("TSC halts in idle");;
#endif
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
cx->usage++;
acpi_state_timer_broadcast(pr, cx, 0);
cx->time += ticks_elapsed(t1, t2);
return ticks_elapsed_in_us(t1, t2);
}
static int c3_cpu_count;
static DEFINE_SPINLOCK(c3_lock);
/**
* acpi_idle_enter_bm - enters C3 with proper BM handling
* @dev: the target CPU
* @state: the state data
*
* If BM is detected, the deepest non-C3 idle state is entered instead.
*/
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
struct acpi_processor *pr;
struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
u32 t1, t2;
pr = processors[smp_processor_id()];
if (unlikely(!pr))
return 0;
if (acpi_idle_suspend)
return(acpi_idle_enter_c1(dev, state));
local_irq_disable();
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we test
* NEED_RESCHED:
*/
smp_mb();
if (unlikely(need_resched())) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
return 0;
}
/*
* Must be done before busmaster disable as we might need to
* access HPET !
*/
acpi_state_timer_broadcast(pr, cx, 1);
if (acpi_idle_bm_check()) {
cx = pr->power.bm_state;
acpi_idle_update_bm_rld(pr, cx);
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
} else {
acpi_idle_update_bm_rld(pr, cx);
spin_lock(&c3_lock);
c3_cpu_count++;
/* Disable bus master arbitration when all CPUs are in C3 */
if (c3_cpu_count == num_online_cpus())
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
spin_unlock(&c3_lock);
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
spin_lock(&c3_lock);
/* Re-enable bus master arbitration */
if (c3_cpu_count == num_online_cpus())
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
c3_cpu_count--;
spin_unlock(&c3_lock);
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86_TSC)
/* TSC could halt in idle, so notify users */
mark_tsc_unstable("TSC halts in idle");
#endif
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
cx->usage++;
acpi_state_timer_broadcast(pr, cx, 0);
cx->time += ticks_elapsed(t1, t2);
return ticks_elapsed_in_us(t1, t2);
}
struct cpuidle_driver acpi_idle_driver = {
.name = "acpi_idle",
.owner = THIS_MODULE,
};
/**
* acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
* @pr: the ACPI processor
*/
static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
{
int i, count = 0;
struct acpi_processor_cx *cx;
struct cpuidle_state *state;
struct cpuidle_device *dev = &pr->power.dev;
if (!pr->flags.power_setup_done)
return -EINVAL;
if (pr->flags.power == 0) {
return -EINVAL;
}
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
if (!cx->valid)
continue;
#ifdef CONFIG_HOTPLUG_CPU
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
!pr->flags.has_cst &&
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
cpuidle_set_statedata(state, cx);
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
state->exit_latency = cx->latency;
state->target_residency = cx->latency * 6;
state->power_usage = cx->power;
state->flags = 0;
switch (cx->type) {
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
state->enter = acpi_idle_enter_c1;
break;
case ACPI_STATE_C2:
state->flags |= CPUIDLE_FLAG_BALANCED;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_simple;
break;
case ACPI_STATE_C3:
state->flags |= CPUIDLE_FLAG_DEEP;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->flags |= CPUIDLE_FLAG_CHECK_BM;
state->enter = pr->flags.bm_check ?
acpi_idle_enter_bm :
acpi_idle_enter_simple;
break;
}
count++;
}
dev->state_count = count;
if (!count)
return -EINVAL;
/* find the deepest state that can handle active BM */
if (pr->flags.bm_check) {
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++)
if (pr->power.states[i].type == ACPI_STATE_C3)
break;
pr->power.bm_state = &pr->power.states[i-1];
}
return 0;
}
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
int ret;
if (!pr)
return -EINVAL;
if (nocst) {
return -ENODEV;
}
if (!pr->flags.power_setup_done)
return -ENODEV;
cpuidle_pause_and_lock();
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
acpi_processor_setup_cpuidle(pr);
ret = cpuidle_enable_device(&pr->power.dev);
cpuidle_resume_and_unlock();
return ret;
}
#endif /* CONFIG_CPU_IDLE */
int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
struct acpi_device *device)
{
@@ -1279,7 +1675,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
"ACPI: processor limited to max C-state %d\n",
max_cstate);
first_run++;
#ifdef CONFIG_SMP
#if !defined (CONFIG_CPU_IDLE) && defined (CONFIG_SMP)
register_latency_notifier(&acpi_processor_latency_notifier);
#endif
}
@@ -1297,6 +1693,7 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
}
acpi_processor_get_power_info(pr);
pr->flags.power_setup_done = 1;
/*
* Install the idle handler if processor power management is supported.
@@ -1304,6 +1701,13 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
* platforms that only support C1.
*/
if ((pr->flags.power) && (!boot_option_idle_override)) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
pr->power.dev.cpu = pr->id;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
for (i = 1; i <= pr->power.count; i++)
if (pr->power.states[i].valid)
@@ -1311,10 +1715,12 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
pr->power.states[i].type);
printk(")\n");
#ifndef CONFIG_CPU_IDLE
if (pr->id == 0) {
pm_idle_save = pm_idle;
pm_idle = acpi_processor_idle;
}
#endif
}
/* 'power' [R] */
@@ -1328,21 +1734,24 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
entry->owner = THIS_MODULE;
}
pr->flags.power_setup_done = 1;
return 0;
}
int acpi_processor_power_exit(struct acpi_processor *pr,
struct acpi_device *device)
{
#ifdef CONFIG_CPU_IDLE
if ((pr->flags.power) && (!boot_option_idle_override))
cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
if (acpi_device_dir(device))
remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
acpi_device_dir(device));
#ifndef CONFIG_CPU_IDLE
/* Unregister the idle handler when processor #0 is removed. */
if (pr->id == 0) {
pm_idle = pm_idle_save;
@@ -1357,6 +1766,7 @@ int acpi_processor_power_exit(struct acpi_processor *pr,
unregister_latency_notifier(&acpi_processor_latency_notifier);
#endif
}
#endif
return 0;
}