xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Browse Source 
Pull clk updates from Stephen Boyd:
 "This time we've got one core change to introduce a bulk clk_get API,
  some new clk drivers and updates for old ones. The diff is pretty
  spread out across a handful of different SoC clk drivers for Broadcom,
  TI, Qualcomm, Renesas, Rockchip, Samsung, and Allwinner, mostly due to
  the introduction of new drivers.

  Core:
   - New clk bulk get APIs
   - Clk divider APIs gained the ability to consider a different parent
     than the current one

  New Drivers:
   - Renesas r8a779{0,1,2,4} CPG/MSSR
   - TI Keystone SCI firmware controlled clks and OMAP4 clkctrl
   - Qualcomm IPQ8074 SoCs
   - Cortina Systems Gemini (SL3516/CS3516)
   - Rockchip rk3128 SoCs
   - Allwinner A83T clk control units
   - Broadcom Stingray SoCs
   - CPU clks for Mediatek MT8173/MT2701/MT7623 SoCs

  Removed Drivers:
   - Old non-DT version of the Realview clk driver

  Updates:
   - Renesas Kconfig/Makefile cleanups
   - Amlogic CEC EE clk support
   - Improved Armada 7K/8K cp110 clk support
   - Rockchip clk id exposing, critical clk markings
   - Samsung converted to clk_hw registration APIs
   - Fixes for Samsung exynos5420 audio clks
   - USB2 clks for Hisilicon hi3798cv200 SoC and video/camera clks for
     hi3660"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (147 commits)
  clk: gemini: Read status before using the value
  clk: scpi: error when clock fails to register
  clk: at91: Add sama5d2 suspend/resume
  gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
  clk: keystone: TI_SCI_PROTOCOL is needed for clk driver
  clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL
  clk: uniphier: provide NAND controller clock rate
  clk: hisilicon: add usb2 clocks for hi3798cv200 SoC
  clk: Add Gemini SoC clock controller
  clk: iproc: Remove __init marking on iproc_pll_clk_setup()
  clk: bcm: Add clocks for Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  clk: mediatek: export cpu multiplexer clock for MT8173 SoCs
  clk: mediatek: export cpu multiplexer clock for MT2701/MT7623 SoCs
  clk: mediatek: add missing cpu mux causing Mediatek cpufreq can't work
  clk: renesas: cpg-mssr: Use of_device_get_match_data() helper
  clk: hi6220: add acpu clock
  clk: zx296718: export I2S mux clocks
  clk: imx7d: create clocks behind rawnand clock gate
  clk: hi3660: Set PPLL2 to 2880M
  ...
This commit is contained in:
Linus Torvalds
2017-07-07 12:26:13 -07:00
parent dd6ec12f3b 3cf50f6b13
commit dddd564dbb
145 changed files with 10477 additions and 1030 deletions
Download Patch File Download Diff File Expand all files Collapse all files

85
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
View File

@@ -7,6 +7,14 @@ registers giving access to numerous features: clocks, pin-muxing and
many other SoC configuration items. This DT binding allows to describe
this system controller.
For the top level node:
- compatible: must be: "syscon", "simple-mfd";
- reg: register area of the AP806 system controller
Clocks:
-------
The Device Tree node representing the AP806 system controller provides
a number of clocks:
@@ -17,19 +25,76 @@ a number of clocks:
Required properties:
- compatible: must be:
"marvell,ap806-system-controller", "syscon"
- reg: register area of the AP806 system controller
- compatible: must be: "marvell,ap806-clock"
- #clock-cells: must be set to 1
- clock-output-names: must be defined to:
"ap-cpu-cluster-0", "ap-cpu-cluster-1", "ap-fixed", "ap-mss"
Pinctrl:
--------
For common binding part and usage, refer to
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
Required properties:
- compatible must be "marvell,ap806-pinctrl",
Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
only for more detailed description in this document.
name pins functions
================================================================================
mpp0 0 gpio, sdio(clk), spi0(clk)
mpp1 1 gpio, sdio(cmd), spi0(miso)
mpp2 2 gpio, sdio(d0), spi0(mosi)
mpp3 3 gpio, sdio(d1), spi0(cs0n)
mpp4 4 gpio, sdio(d2), i2c0(sda)
mpp5 5 gpio, sdio(d3), i2c0(sdk)
mpp6 6 gpio, sdio(ds)
mpp7 7 gpio, sdio(d4), uart1(rxd)
mpp8 8 gpio, sdio(d5), uart1(txd)
mpp9 9 gpio, sdio(d6), spi0(cs1n)
mpp10 10 gpio, sdio(d7)
mpp11 11 gpio, uart0(txd)
mpp12 12 gpio, sdio(pw_off), sdio(hw_rst)
mpp13 13 gpio
mpp14 14 gpio
mpp15 15 gpio
mpp16 16 gpio
mpp17 17 gpio
mpp18 18 gpio
mpp19 19 gpio, uart0(rxd), sdio(pw_off)
GPIO:
-----
For common binding part and usage, refer to
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
Required properties:
- compatible: "marvell,armada-8k-gpio"
- offset: offset address inside the syscon block
Example:
ap_syscon: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
reg = <0x6f4000 0x1000>;
syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller", "syscon";
ap_clk: clock {
compatible = "marvell,ap806-clock";
#clock-cells = <1>;
clock-output-names = "ap-cpu-cluster-0", "ap-cpu-cluster-1",
"ap-fixed", "ap-mss";
reg = <0x6f4000 0x1000>;
};
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
};
ap_gpio: gpio {
compatible = "marvell,armada-8k-gpio";
offset = <0x1040>;
ngpios = <19>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&ap_pinctrl 0 0 19>;
};
};

144
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
View File

@@ -7,6 +7,13 @@ Controller 0 and System Controller 1. This Device Tree binding allows
to describe the first system controller, which provides registers to
configure various aspects of the SoC.
For the top level node:
- compatible: must be: "syscon", "simple-mfd";
- reg: register area of the CP110 system controller 0
Clocks:
-------
The Device Tree node representing this System Controller 0 provides a
number of clocks:
@@ -27,6 +34,7 @@ The following clocks are available:
- 0 2 EIP
- 0 3 Core
- 0 4 NAND core
- 0 5 SDIO core
- Gatable clocks
- 1 0 Audio
- 1 1 Comm Unit
@@ -56,28 +64,126 @@ The following clocks are available:
Required properties:
- compatible: must be:
"marvell,cp110-system-controller0", "syscon";
- reg: register area of the CP110 system controller 0
"marvell,cp110-clock"
- #clock-cells: must be set to 2
- core-clock-output-names must be set to:
"cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core"
- gate-clock-output-names must be set to:
"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
Pinctrl:
--------
For common binding part and usage, refer to the file
Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
Required properties:
- compatible: "marvell,armada-7k-pinctrl",
"marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl"
depending on the specific variant of the SoC being used.
Available mpp pins/groups and functions:
Note: brackets (x) are not part of the mpp name for marvell,function and given
only for more detailed description in this document.
name pins functions
================================================================================
mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
mpp17 17 gpio, dev(ad5), ge0(txd3)
mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
mpp20 20 gpio, dev(ad2), ge0(txd0)
mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
mpp24 24 gpio, dev(a0), au(i2slrclk)
mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
mpp26 26 gpio, dev(wen0), au(i2sbclk)
mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
mpp46 46 gpio, ge1(txd1), uart1(rts)
mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
GPIO:
-----
For common binding part and usage, refer to
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
Required properties:
- compatible: "marvell,armada-8k-gpio"
- offset: offset address inside the syscon block
Example:
cpm_syscon0: system-controller@440000 {
compatible = "marvell,cp110-system-controller0", "syscon";
reg = <0x440000 0x1000>;
cpm_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
reg = <0x440000 0x1000>;
cpm_clk: clock {
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
core-clock-output-names = "cpm-apll", "cpm-ppv2-core", "cpm-eip", "cpm-core", "cpm-nand-core";
gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
};
cpm_pinctrl: pinctrl {
compatible = "marvell,armada-8k-cpm-pinctrl";
};
cpm_gpio1: gpio@100 {
compatible = "marvell,armada-8k-gpio";
offset = <0x100>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&cpm_pinctrl 0 0 32>;
status = "disabled";
};
};

11
Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt
View File

@@ -1,11 +1,14 @@
* Amlogic Meson8b Clock and Reset Unit
* Amlogic Meson8, Meson8b and Meson8m2 Clock and Reset Unit
The Amlogic Meson8b clock controller generates and supplies clock to various
controllers within the SoC.
The Amlogic Meson8 / Meson8b / Meson8m2 clock controller generates and
supplies clock to various controllers within the SoC.
Required Properties:
- compatible: should be "amlogic,meson8b-clkc"
- compatible: must be one of:
- "amlogic,meson8-clkc" for Meson8 (S802) SoCs
- "amlogic,meson8b-clkc" for Meson8 (S805) SoCs
- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
- reg: it must be composed by two tuples:
0) physical base address of the xtal register and length of memory
mapped region.

1
Documentation/devicetree/bindings/clock/hi6220-clock.txt
View File

@@ -11,6 +11,7 @@ Required Properties:
- compatible: the compatible should be one of the following strings to
indicate the clock controller functionality.
- "hisilicon,hi6220-acpu-sctrl"
- "hisilicon,hi6220-aoctrl"
- "hisilicon,hi6220-sysctrl"
- "hisilicon,hi6220-mediactrl"

1
Documentation/devicetree/bindings/clock/qcom,gcc.txt
View File

@@ -8,6 +8,7 @@ Required properties :
"qcom,gcc-apq8084"
"qcom,gcc-ipq8064"
"qcom,gcc-ipq4019"
"qcom,gcc-ipq8074"
"qcom,gcc-msm8660"
"qcom,gcc-msm8916"
"qcom,gcc-msm8960"

6
Documentation/devicetree/bindings/clock/qoriq-clock.txt
View File

@@ -57,6 +57,11 @@ Optional properties:
- clocks: If clock-frequency is not specified, sysclk may be provided
as an input clock. Either clock-frequency or clocks must be
provided.
A second input clock, called "coreclk", may be provided if
core PLLs are based on a different input clock from the
platform PLL.
- clock-names: Required if a coreclk is present. Valid names are
"sysclk" and "coreclk".
2. Clock Provider
@@ -73,6 +78,7 @@ second cell is the clock index for the specified type.
2 hwaccel index (n in CLKCGnHWACSR)
3 fman 0 for fm1, 1 for fm2
4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
5 coreclk must be 0
3. Example

10
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
View File

@@ -15,6 +15,11 @@ Required Properties:
- compatible: Must be one of:
- "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
- "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
- "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
- "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
- "renesas,r8a7792-cpg-mssr" for the r8a7792 SoC (R-Car V2H)
- "renesas,r8a7793-cpg-mssr" for the r8a7793 SoC (R-Car M2-N)
- "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -24,9 +29,10 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- "extal" (r8a7743, r8a7745, r8a7795, r8a7796)
- "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794,
r8a7795, r8a7796)
- "extalr" (r8a7795, r8a7796)
- "usb_extal" (r8a7743, r8a7745)
- "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794)
- #clock-cells: Must be 2
- For CPG core clocks, the two clock specifier cells must be "CPG_CORE"

56
Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt Normal file
View File

@@ -0,0 +1,56 @@
* Rockchip RK3128 Clock and Reset Unit
The RK3128 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
Required Properties:
- compatible: should be "rockchip,rk3128-cru"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
- #reset-cells: should be 1.
Optional Properties:
- rockchip,grf: phandle to the syscon managing the "general register files"
If missing pll rates are not changeable, due to the missing pll lock status.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
used in device tree sources. Similar macros exist for the reset sources in
these files.
External clocks:
There are several clocks that are generated outside the SoC. It is expected
that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "ext_i2s" - external I2S clock - optional,
- "gmac_clkin" - external GMAC clock - optional
Example: Clock controller node:
cru: cru@20000000 {
compatible = "rockchip,rk3128-cru";
reg = <0x20000000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
Example: UART controller node that consumes the clock generated by the clock
controller:
uart2: serial@20068000 {
compatible = "rockchip,serial";
reg = <0x20068000 0x100>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "sclk_uart", "pclk_uart";
};

31
Documentation/devicetree/bindings/clock/sun8i-de2.txt Normal file
View File

@@ -0,0 +1,31 @@
Allwinner Display Engine 2.0 Clock Control Binding
--------------------------------------------------
Required properties :
- compatible: must contain one of the following compatibles:
- "allwinner,sun8i-a83t-de2-clk"
- "allwinner,sun8i-v3s-de2-clk"
- "allwinner,sun50i-h5-de2-clk"
- reg: Must contain the registers base address and length
- clocks: phandle to the clocks feeding the display engine subsystem.
Three are needed:
- "mod": the display engine module clock
- "bus": the bus clock for the whole display engine subsystem
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset control for the display engine subsystem.
- #clock-cells : must contain 1
- #reset-cells : must contain 1
Example:
de2_clocks: clock@1000000 {
compatible = "allwinner,sun8i-a83t-de2-clk";
reg = <0x01000000 0x100000>;
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
"mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
};

5
Documentation/devicetree/bindings/clock/sunxi-ccu.txt
View File

@@ -6,6 +6,8 @@ Required properties :
- "allwinner,sun6i-a31-ccu"
- "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-a83t-ccu"
- "allwinner,sun8i-a83t-r-ccu"
- "allwinner,sun8i-h3-ccu"
- "allwinner,sun8i-h3-r-ccu"
- "allwinner,sun8i-v3s-ccu"
@@ -18,11 +20,12 @@ Required properties :
- clocks: phandle to the oscillators feeding the CCU. Two are needed:
- "hosc": the high frequency oscillator (usually at 24MHz)
- "losc": the low frequency oscillator (usually at 32kHz)
On the A83T, this is the internal 16MHz oscillator divided by 512
- clock-names: Must contain the clock names described just above
- #clock-cells : must contain 1
- #reset-cells : must contain 1
For the PRCM CCUs on H3/A64, two more clocks are needed:
For the PRCM CCUs on A83T/H3/A64, two more clocks are needed:
- "pll-periph": the SoC's peripheral PLL from the main CCU
- "iosc": the SoC's internal frequency oscillator

37
Documentation/devicetree/bindings/clock/ti,sci-clk.txt Normal file
View File

@@ -0,0 +1,37 @@
Texas Instruments TI-SCI Clocks
===============================
All clocks on Texas Instruments' SoCs that contain a System Controller,
are only controlled by this entity. Communication between a host processor
running an OS and the System Controller happens through a protocol known
as TI-SCI[1]. This clock implementation plugs into the common clock
framework and makes use of the TI-SCI protocol on clock API requests.
[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
Required properties:
-------------------
- compatible: Must be "ti,k2g-sci-clk"
- #clock-cells: Shall be 2.
In clock consumers, this cell represents the device ID and clock ID
exposed by the PM firmware. The assignments can be found in the header
files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and
<dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc>
is the SoC involved, for example 'k2g'.
Examples:
--------
pmmc: pmmc {
compatible = "ti,k2g-sci";
k2g_clks: clocks {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
};
};
uart0: serial@2530c00 {
compatible = "ns16550a";
clocks = <&k2g_clks 0x2c 0>;
};

56
Documentation/devicetree/bindings/clock/ti-clkctrl.txt Normal file
View File

@@ -0,0 +1,56 @@
Texas Instruments clkctrl clock binding
Texas Instruments SoCs can have a clkctrl clock controller for each
interconnect target module. The clkctrl clock controller manages functional
and interface clocks for each module. Each clkctrl controller can also
gate one or more optional functional clocks for a module, and can have one
or more clock muxes. There is a clkctrl clock controller typically for each
interconnect target module on omap4 and later variants.
The clock consumers can specify the index of the clkctrl clock using
the hardware offset from the clkctrl instance register space. The optional
clocks can be specified by clkctrl hardware offset and the index of the
optional clock.
For more information, please see the Linux clock framework binding at
Documentation/devicetree/bindings/clock/clock-bindings.txt.
Required properties :
- compatible : shall be "ti,clkctrl"
- #clock-cells : shall contain 2 with the first entry being the instance
offset from the clock domain base and the second being the
clock index
Example: Clock controller node on omap 4430:
&cm2 {
l4per: cm@1400 {
cm_l4per@0 {
cm_l4per_clkctrl: clk@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x1b0>;
#clock-cells = <2>;
};
};
};
};
Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
#define OMAP4_CLKCTRL_OFFSET 0x20
#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET)
#define MODULEMODE_HWCTRL 1
#define MODULEMODE_SWCTRL 2
#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28)
#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30)
#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38)
...
#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60)
Example: Clock consumer node for GPIO2:
&gpio2 {
clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
};

24
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
View File

@@ -2,17 +2,27 @@
Required properties:
- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
370. "marvell,mv78200-gpio" should be used for the Discovery
MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
SoCs (MV78230, MV78260, MV78460).
- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
"marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
"marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
should be used for the Discovery MV78200.
"marvel,armadaxp-gpio" should be used for all Armada XP SoCs
(MV78230, MV78260, MV78460).
"marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
SoCs (either from AP or CP), see
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
and
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
for specific details about the offset property.
- reg: Address and length of the register set for the device. Only one
entry is expected, except for the "marvell,armadaxp-gpio" variant
for which two entries are expected: one for the general registers,
one for the per-cpu registers.
one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
- interrupts: The list of interrupts that are used for all the pins
managed by this GPIO bank. There can be more than one interrupt