[ALSA] Add echoaudio sound drivers
From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24, indigo, indigodj, indigoio, layla20, lala24, mia, mona) Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
This commit is contained in:
Giuliano Pochini
committed by
Jaroslav Kysela
Jaroslav Kysela
parent
cb9d24e434
commit
dd7b254d8d
590
sound/pci/echoaudio/echoaudio.h
Normal file
590
sound/pci/echoaudio/echoaudio.h
Normal file
@@ -0,0 +1,590 @@
|
||||
/****************************************************************************
|
||||
|
||||
Copyright Echo Digital Audio Corporation (c) 1998 - 2004
|
||||
All rights reserved
|
||||
www.echoaudio.com
|
||||
|
||||
This file is part of Echo Digital Audio's generic driver library.
|
||||
|
||||
Echo Digital Audio's generic driver library is free software;
|
||||
you can redistribute it and/or modify it under the terms of
|
||||
the GNU General Public License as published by the Free Software
|
||||
Foundation.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 59 Temple Place - Suite 330, Boston,
|
||||
MA 02111-1307, USA.
|
||||
|
||||
****************************************************************************
|
||||
|
||||
Translation from C++ and adaptation for use in ALSA-Driver
|
||||
were made by Giuliano Pochini <pochini@shiny.it>
|
||||
|
||||
****************************************************************************
|
||||
|
||||
|
||||
Here's a block diagram of how most of the cards work:
|
||||
|
||||
+-----------+
|
||||
record | |<-------------------- Inputs
|
||||
<-------| | |
|
||||
PCI | Transport | |
|
||||
bus | engine | \|/
|
||||
------->| | +-------+
|
||||
play | |--->|monitor|-------> Outputs
|
||||
+-----------+ | mixer |
|
||||
+-------+
|
||||
|
||||
The lines going to and from the PCI bus represent "pipes". A pipe performs
|
||||
audio transport - moving audio data to and from buffers on the host via
|
||||
bus mastering.
|
||||
|
||||
The inputs and outputs on the right represent input and output "busses."
|
||||
A bus is a physical, real connection to the outside world. An example
|
||||
of a bus would be the 1/4" analog connectors on the back of Layla or
|
||||
an RCA S/PDIF connector.
|
||||
|
||||
For most cards, there is a one-to-one correspondence between outputs
|
||||
and busses; that is, each individual pipe is hard-wired to a single bus.
|
||||
|
||||
Cards that work this way are Darla20, Gina20, Layla20, Darla24, Gina24,
|
||||
Layla24, Mona, and Indigo.
|
||||
|
||||
|
||||
Mia has a feature called "virtual outputs."
|
||||
|
||||
|
||||
+-----------+
|
||||
record | |<----------------------------- Inputs
|
||||
<-------| | |
|
||||
PCI | Transport | |
|
||||
bus | engine | \|/
|
||||
------->| | +------+ +-------+
|
||||
play | |-->|vmixer|-->|monitor|-------> Outputs
|
||||
+-----------+ +------+ | mixer |
|
||||
+-------+
|
||||
|
||||
|
||||
Obviously, the difference here is the box labeled "vmixer." Vmixer is
|
||||
short for "virtual output mixer." For Mia, pipes are *not* hard-wired
|
||||
to a single bus; the vmixer lets you mix any pipe to any bus in any
|
||||
combination.
|
||||
|
||||
Note, however, that the left-hand side of the diagram is unchanged.
|
||||
Transport works exactly the same way - the difference is in the mixer stage.
|
||||
|
||||
|
||||
Pipes and busses are numbered starting at zero.
|
||||
|
||||
|
||||
|
||||
Pipe index
|
||||
==========
|
||||
|
||||
A number of calls in CEchoGals refer to a "pipe index". A pipe index is
|
||||
a unique number for a pipe that unambiguously refers to a playback or record
|
||||
pipe. Pipe indices are numbered starting with analog outputs, followed by
|
||||
digital outputs, then analog inputs, then digital inputs.
|
||||
|
||||
Take Gina24 as an example:
|
||||
|
||||
Pipe index
|
||||
|
||||
0-7 Analog outputs (0 .. FirstDigitalBusOut-1)
|
||||
8-15 Digital outputs (FirstDigitalBusOut .. NumBussesOut-1)
|
||||
16-17 Analog inputs
|
||||
18-25 Digital inputs
|
||||
|
||||
|
||||
You get the pipe index by calling CEchoGals::OpenAudio; the other transport
|
||||
functions take the pipe index as a parameter. If you need a pipe index for
|
||||
some other reason, use the handy Makepipe_index method.
|
||||
|
||||
|
||||
Some calls take a CChannelMask parameter; CChannelMask is a handy way to
|
||||
group pipe indices.
|
||||
|
||||
|
||||
|
||||
Digital mode switch
|
||||
===================
|
||||
|
||||
Some cards (right now, Gina24, Layla24, and Mona) have a Digital Mode Switch
|
||||
or DMS. Cards with a DMS can be set to one of three mutually exclusive
|
||||
digital modes: S/PDIF RCA, S/PDIF optical, or ADAT optical.
|
||||
|
||||
This may create some confusion since ADAT optical is 8 channels wide and
|
||||
S/PDIF is only two channels wide. Gina24, Layla24, and Mona handle this
|
||||
by acting as if they always have 8 digital outs and ins. If you are in
|
||||
either S/PDIF mode, the last 6 channels don't do anything - data sent
|
||||
out these channels is thrown away and you will always record zeros.
|
||||
|
||||
Note that with Gina24, Layla24, and Mona, sample rates above 50 kHz are
|
||||
only available if you have the card configured for S/PDIF optical or S/PDIF
|
||||
RCA.
|
||||
|
||||
|
||||
|
||||
Double speed mode
|
||||
=================
|
||||
|
||||
Some of the cards support 88.2 kHz and 96 kHz sampling (Darla24, Gina24,
|
||||
Layla24, Mona, Mia, and Indigo). For these cards, the driver sometimes has
|
||||
to worry about "double speed mode"; double speed mode applies whenever the
|
||||
sampling rate is above 50 kHz.
|
||||
|
||||
For instance, Mona and Layla24 support word clock sync. However, they
|
||||
actually support two different word clock modes - single speed (below
|
||||
50 kHz) and double speed (above 50 kHz). The hardware detects if a single
|
||||
or double speed word clock signal is present; the generic code uses that
|
||||
information to determine which mode to use.
|
||||
|
||||
The generic code takes care of all this for you.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef _ECHOAUDIO_H_
|
||||
#define _ECHOAUDIO_H_
|
||||
|
||||
|
||||
#define TRUE 1
|
||||
#define FALSE 0
|
||||
|
||||
#include "echoaudio_dsp.h"
|
||||
|
||||
|
||||
|
||||
/***********************************************************************
|
||||
|
||||
PCI configuration space
|
||||
|
||||
***********************************************************************/
|
||||
|
||||
/*
|
||||
* PCI vendor ID and device IDs for the hardware
|
||||
*/
|
||||
#define VENDOR_ID 0x1057
|
||||
#define DEVICE_ID_56301 0x1801
|
||||
#define DEVICE_ID_56361 0x3410
|
||||
#define SUBVENDOR_ID 0xECC0
|
||||
|
||||
|
||||
/*
|
||||
* Valid Echo PCI subsystem card IDs
|
||||
*/
|
||||
#define DARLA20 0x0010
|
||||
#define GINA20 0x0020
|
||||
#define LAYLA20 0x0030
|
||||
#define DARLA24 0x0040
|
||||
#define GINA24 0x0050
|
||||
#define LAYLA24 0x0060
|
||||
#define MONA 0x0070
|
||||
#define MIA 0x0080
|
||||
#define INDIGO 0x0090
|
||||
#define INDIGO_IO 0x00a0
|
||||
#define INDIGO_DJ 0x00b0
|
||||
#define ECHO3G 0x0100
|
||||
|
||||
|
||||
/************************************************************************
|
||||
|
||||
Array sizes and so forth
|
||||
|
||||
***********************************************************************/
|
||||
|
||||
/*
|
||||
* Sizes
|
||||
*/
|
||||
#define ECHO_MAXAUDIOINPUTS 32 /* Max audio input channels */
|
||||
#define ECHO_MAXAUDIOOUTPUTS 32 /* Max audio output channels */
|
||||
#define ECHO_MAXAUDIOPIPES 32 /* Max number of input and output
|
||||
* pipes */
|
||||
#define E3G_MAX_OUTPUTS 16
|
||||
#define ECHO_MAXMIDIJACKS 1 /* Max MIDI ports */
|
||||
#define ECHO_MIDI_QUEUE_SZ 512 /* Max MIDI input queue entries */
|
||||
#define ECHO_MTC_QUEUE_SZ 32 /* Max MIDI time code input queue
|
||||
* entries */
|
||||
|
||||
/*
|
||||
* MIDI activity indicator timeout
|
||||
*/
|
||||
#define MIDI_ACTIVITY_TIMEOUT_USEC 200000
|
||||
|
||||
|
||||
/****************************************************************************
|
||||
|
||||
Clocks
|
||||
|
||||
*****************************************************************************/
|
||||
|
||||
/*
|
||||
* Clock numbers
|
||||
*/
|
||||
#define ECHO_CLOCK_INTERNAL 0
|
||||
#define ECHO_CLOCK_WORD 1
|
||||
#define ECHO_CLOCK_SUPER 2
|
||||
#define ECHO_CLOCK_SPDIF 3
|
||||
#define ECHO_CLOCK_ADAT 4
|
||||
#define ECHO_CLOCK_ESYNC 5
|
||||
#define ECHO_CLOCK_ESYNC96 6
|
||||
#define ECHO_CLOCK_MTC 7
|
||||
#define ECHO_CLOCK_NUMBER 8
|
||||
#define ECHO_CLOCKS 0xffff
|
||||
|
||||
/*
|
||||
* Clock bit numbers - used to report capabilities and whatever clocks
|
||||
* are being detected dynamically.
|
||||
*/
|
||||
#define ECHO_CLOCK_BIT_INTERNAL (1 << ECHO_CLOCK_INTERNAL)
|
||||
#define ECHO_CLOCK_BIT_WORD (1 << ECHO_CLOCK_WORD)
|
||||
#define ECHO_CLOCK_BIT_SUPER (1 << ECHO_CLOCK_SUPER)
|
||||
#define ECHO_CLOCK_BIT_SPDIF (1 << ECHO_CLOCK_SPDIF)
|
||||
#define ECHO_CLOCK_BIT_ADAT (1 << ECHO_CLOCK_ADAT)
|
||||
#define ECHO_CLOCK_BIT_ESYNC (1 << ECHO_CLOCK_ESYNC)
|
||||
#define ECHO_CLOCK_BIT_ESYNC96 (1 << ECHO_CLOCK_ESYNC96)
|
||||
#define ECHO_CLOCK_BIT_MTC (1<<ECHO_CLOCK_MTC)
|
||||
|
||||
|
||||
/***************************************************************************
|
||||
|
||||
Digital modes
|
||||
|
||||
****************************************************************************/
|
||||
|
||||
/*
|
||||
* Digital modes for Mona, Layla24, and Gina24
|
||||
*/
|
||||
#define DIGITAL_MODE_NONE 0xFF
|
||||
#define DIGITAL_MODE_SPDIF_RCA 0
|
||||
#define DIGITAL_MODE_SPDIF_OPTICAL 1
|
||||
#define DIGITAL_MODE_ADAT 2
|
||||
#define DIGITAL_MODE_SPDIF_CDROM 3
|
||||
#define DIGITAL_MODES 4
|
||||
|
||||
/*
|
||||
* Digital mode capability masks
|
||||
*/
|
||||
#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA (1 << DIGITAL_MODE_SPDIF_RCA)
|
||||
#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL (1 << DIGITAL_MODE_SPDIF_OPTICAL)
|
||||
#define ECHOCAPS_HAS_DIGITAL_MODE_ADAT (1 << DIGITAL_MODE_ADAT)
|
||||
#define ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM (1 << DIGITAL_MODE_SPDIF_CDROM)
|
||||
|
||||
|
||||
#define EXT_3GBOX_NC 0x01 /* 3G box not connected */
|
||||
#define EXT_3GBOX_NOT_SET 0x02 /* 3G box not detected yet */
|
||||
|
||||
|
||||
#define ECHOGAIN_MUTED (-128) /* Minimum possible gain */
|
||||
#define ECHOGAIN_MINOUT (-128) /* Min output gain (dB) */
|
||||
#define ECHOGAIN_MAXOUT (6) /* Max output gain (dB) */
|
||||
#define ECHOGAIN_MININP (-50) /* Min input gain (0.5 dB) */
|
||||
#define ECHOGAIN_MAXINP (50) /* Max input gain (0.5 dB) */
|
||||
|
||||
#define PIPE_STATE_STOPPED 0 /* Pipe has been reset */
|
||||
#define PIPE_STATE_PAUSED 1 /* Pipe has been stopped */
|
||||
#define PIPE_STATE_STARTED 2 /* Pipe has been started */
|
||||
#define PIPE_STATE_PENDING 3 /* Pipe has pending start */
|
||||
|
||||
|
||||
/* Debug initialization */
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define DE_INIT(x) snd_printk x
|
||||
#else
|
||||
#define DE_INIT(x)
|
||||
#endif
|
||||
|
||||
/* Debug hw_params callbacks */
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define DE_HWP(x) snd_printk x
|
||||
#else
|
||||
#define DE_HWP(x)
|
||||
#endif
|
||||
|
||||
/* Debug normal activity (open, start, stop...) */
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define DE_ACT(x) snd_printk x
|
||||
#else
|
||||
#define DE_ACT(x)
|
||||
#endif
|
||||
|
||||
/* Debug midi activity */
|
||||
#ifdef CONFIG_SND_DEBUG
|
||||
#define DE_MID(x) snd_printk x
|
||||
#else
|
||||
#define DE_MID(x)
|
||||
#endif
|
||||
|
||||
|
||||
struct audiopipe {
|
||||
volatile u32 *dma_counter; /* Commpage register that contains
|
||||
* the current dma position
|
||||
* (lower 32 bits only)
|
||||
*/
|
||||
u32 last_counter; /* The last position, which is used
|
||||
* to compute...
|
||||
*/
|
||||
u32 position; /* ...the number of bytes tranferred
|
||||
* by the DMA engine, modulo the
|
||||
* buffer size
|
||||
*/
|
||||
short index; /* Index of the first channel or <0
|
||||
* if hw is not configured yet
|
||||
*/
|
||||
short interleave;
|
||||
struct snd_dma_buffer sgpage; /* Room for the scatter-gather list */
|
||||
struct snd_pcm_hardware hw;
|
||||
struct snd_pcm_hw_constraint_list constr;
|
||||
short sglist_head;
|
||||
char state; /* pipe state */
|
||||
};
|
||||
|
||||
|
||||
struct audioformat {
|
||||
u8 interleave; /* How the data is arranged in memory:
|
||||
* mono = 1, stereo = 2, ...
|
||||
*/
|
||||
u8 bits_per_sample; /* 8, 16, 24, 32 (24 bits left aligned) */
|
||||
char mono_to_stereo; /* Only used if interleave is 1 and
|
||||
* if this is an output pipe.
|
||||
*/
|
||||
char data_are_bigendian; /* 1 = big endian, 0 = little endian */
|
||||
};
|
||||
|
||||
|
||||
struct echoaudio {
|
||||
spinlock_t lock;
|
||||
struct snd_pcm_substream *substream[DSP_MAXPIPES];
|
||||
int last_period[DSP_MAXPIPES];
|
||||
struct semaphore mode_mutex;
|
||||
u16 num_digital_modes, digital_mode_list[6];
|
||||
u16 num_clock_sources, clock_source_list[10];
|
||||
atomic_t opencount;
|
||||
struct snd_kcontrol *clock_src_ctl;
|
||||
struct snd_pcm *analog_pcm, *digital_pcm;
|
||||
struct snd_card *card;
|
||||
const char *card_name;
|
||||
struct pci_dev *pci;
|
||||
unsigned long dsp_registers_phys;
|
||||
struct resource *iores;
|
||||
struct snd_dma_buffer commpage_dma_buf;
|
||||
int irq;
|
||||
#ifdef ECHOCARD_HAS_MIDI
|
||||
struct snd_rawmidi *rmidi;
|
||||
struct snd_rawmidi_substream *midi_in, *midi_out;
|
||||
#endif
|
||||
struct timer_list timer;
|
||||
char tinuse; /* Timer in use */
|
||||
char midi_full; /* MIDI output buffer is full */
|
||||
char can_set_rate;
|
||||
char rate_set;
|
||||
|
||||
/* This stuff is used mainly by the lowlevel code */
|
||||
struct comm_page *comm_page; /* Virtual address of the memory
|
||||
* seen by DSP
|
||||
*/
|
||||
u32 pipe_alloc_mask; /* Bitmask of allocated pipes */
|
||||
u32 pipe_cyclic_mask; /* Bitmask of pipes with cyclic
|
||||
* buffers
|
||||
*/
|
||||
u32 sample_rate; /* Card sample rate in Hz */
|
||||
u8 digital_mode; /* Current digital mode
|
||||
* (see DIGITAL_MODE_*)
|
||||
*/
|
||||
u8 spdif_status; /* Gina20, Darla20, Darla24 - only */
|
||||
u8 clock_state; /* Gina20, Darla20, Darla24 - only */
|
||||
u8 input_clock; /* Currently selected sample clock
|
||||
* source
|
||||
*/
|
||||
u8 output_clock; /* Layla20 only */
|
||||
char meters_enabled; /* VU-meters status */
|
||||
char asic_loaded; /* Set TRUE when ASIC loaded */
|
||||
char bad_board; /* Set TRUE if DSP won't load */
|
||||
char professional_spdif; /* 0 = consumer; 1 = professional */
|
||||
char non_audio_spdif; /* 3G - only */
|
||||
char digital_in_automute; /* Gina24, Layla24, Mona - only */
|
||||
char has_phantom_power;
|
||||
char hasnt_input_nominal_level; /* Gina3G */
|
||||
char phantom_power; /* Gina3G - only */
|
||||
char has_midi;
|
||||
char midi_input_enabled;
|
||||
|
||||
#ifdef ECHOCARD_ECHO3G
|
||||
/* External module -dependent pipe and bus indexes */
|
||||
char px_digital_out, px_analog_in, px_digital_in, px_num;
|
||||
char bx_digital_out, bx_analog_in, bx_digital_in, bx_num;
|
||||
#endif
|
||||
|
||||
char nominal_level[ECHO_MAXAUDIOPIPES]; /* True == -10dBV
|
||||
* False == +4dBu */
|
||||
s8 input_gain[ECHO_MAXAUDIOINPUTS]; /* Input level -50..+50
|
||||
* unit is 0.5dB */
|
||||
s8 output_gain[ECHO_MAXAUDIOOUTPUTS]; /* Output level -128..+6 dB
|
||||
* (-128=muted) */
|
||||
s8 monitor_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOINPUTS];
|
||||
/* -128..+6 dB */
|
||||
s8 vmixer_gain[ECHO_MAXAUDIOOUTPUTS][ECHO_MAXAUDIOOUTPUTS];
|
||||
/* -128..+6 dB */
|
||||
|
||||
u16 digital_modes; /* Bitmask of supported modes
|
||||
* (see ECHOCAPS_HAS_DIGITAL_MODE_*) */
|
||||
u16 input_clock_types; /* Suppoted input clock types */
|
||||
u16 output_clock_types; /* Suppoted output clock types -
|
||||
* Layla20 only */
|
||||
u16 device_id, subdevice_id;
|
||||
u16 *dsp_code; /* Current DSP code loaded,
|
||||
* NULL if nothing loaded */
|
||||
const struct firmware *dsp_code_to_load;/* DSP code to load */
|
||||
const struct firmware *asic_code; /* Current ASIC code */
|
||||
u32 comm_page_phys; /* Physical address of the
|
||||
* memory seen by DSP */
|
||||
volatile u32 __iomem *dsp_registers; /* DSP's register base */
|
||||
u32 active_mask; /* Chs. active mask or
|
||||
* punks out */
|
||||
|
||||
#ifdef ECHOCARD_HAS_MIDI
|
||||
u16 mtc_state; /* State for MIDI input parsing state machine */
|
||||
u8 midi_buffer[MIDI_IN_BUFFER_SIZE];
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
static int init_dsp_comm_page(struct echoaudio *chip);
|
||||
static int init_line_levels(struct echoaudio *chip);
|
||||
static int free_pipes(struct echoaudio *chip, struct audiopipe *pipe);
|
||||
static int load_firmware(struct echoaudio *chip);
|
||||
static int wait_handshake(struct echoaudio *chip);
|
||||
static int send_vector(struct echoaudio *chip, u32 command);
|
||||
static int get_firmware(const struct firmware **fw_entry,
|
||||
const struct firmware *frm, struct echoaudio *chip);
|
||||
static void free_firmware(const struct firmware *fw_entry);
|
||||
|
||||
#ifdef ECHOCARD_HAS_MIDI
|
||||
static int enable_midi_input(struct echoaudio *chip, char enable);
|
||||
static int midi_service_irq(struct echoaudio *chip);
|
||||
static int __devinit snd_echo_midi_create(struct snd_card *card,
|
||||
struct echoaudio *chip);
|
||||
#endif
|
||||
|
||||
|
||||
static inline void clear_handshake(struct echoaudio *chip)
|
||||
{
|
||||
chip->comm_page->handshake = 0;
|
||||
}
|
||||
|
||||
static inline u32 get_dsp_register(struct echoaudio *chip, u32 index)
|
||||
{
|
||||
return readl(&chip->dsp_registers[index]);
|
||||
}
|
||||
|
||||
static inline void set_dsp_register(struct echoaudio *chip, u32 index,
|
||||
u32 value)
|
||||
{
|
||||
writel(value, &chip->dsp_registers[index]);
|
||||
}
|
||||
|
||||
|
||||
/* Pipe and bus indexes. PX_* and BX_* are defined as chip->px_* and chip->bx_*
|
||||
for 3G cards because they depend on the external box. They are integer
|
||||
constants for all other cards.
|
||||
Never use those defines directly, use the following functions instead. */
|
||||
|
||||
static inline int px_digital_out(const struct echoaudio *chip)
|
||||
{
|
||||
return PX_DIGITAL_OUT;
|
||||
}
|
||||
|
||||
static inline int px_analog_in(const struct echoaudio *chip)
|
||||
{
|
||||
return PX_ANALOG_IN;
|
||||
}
|
||||
|
||||
static inline int px_digital_in(const struct echoaudio *chip)
|
||||
{
|
||||
return PX_DIGITAL_IN;
|
||||
}
|
||||
|
||||
static inline int px_num(const struct echoaudio *chip)
|
||||
{
|
||||
return PX_NUM;
|
||||
}
|
||||
|
||||
static inline int bx_digital_out(const struct echoaudio *chip)
|
||||
{
|
||||
return BX_DIGITAL_OUT;
|
||||
}
|
||||
|
||||
static inline int bx_analog_in(const struct echoaudio *chip)
|
||||
{
|
||||
return BX_ANALOG_IN;
|
||||
}
|
||||
|
||||
static inline int bx_digital_in(const struct echoaudio *chip)
|
||||
{
|
||||
return BX_DIGITAL_IN;
|
||||
}
|
||||
|
||||
static inline int bx_num(const struct echoaudio *chip)
|
||||
{
|
||||
return BX_NUM;
|
||||
}
|
||||
|
||||
static inline int num_pipes_out(const struct echoaudio *chip)
|
||||
{
|
||||
return px_analog_in(chip);
|
||||
}
|
||||
|
||||
static inline int num_pipes_in(const struct echoaudio *chip)
|
||||
{
|
||||
return px_num(chip) - px_analog_in(chip);
|
||||
}
|
||||
|
||||
static inline int num_busses_out(const struct echoaudio *chip)
|
||||
{
|
||||
return bx_analog_in(chip);
|
||||
}
|
||||
|
||||
static inline int num_busses_in(const struct echoaudio *chip)
|
||||
{
|
||||
return bx_num(chip) - bx_analog_in(chip);
|
||||
}
|
||||
|
||||
static inline int num_analog_busses_out(const struct echoaudio *chip)
|
||||
{
|
||||
return bx_digital_out(chip);
|
||||
}
|
||||
|
||||
static inline int num_analog_busses_in(const struct echoaudio *chip)
|
||||
{
|
||||
return bx_digital_in(chip) - bx_analog_in(chip);
|
||||
}
|
||||
|
||||
static inline int num_digital_busses_out(const struct echoaudio *chip)
|
||||
{
|
||||
return num_busses_out(chip) - num_analog_busses_out(chip);
|
||||
}
|
||||
|
||||
static inline int num_digital_busses_in(const struct echoaudio *chip)
|
||||
{
|
||||
return num_busses_in(chip) - num_analog_busses_in(chip);
|
||||
}
|
||||
|
||||
/* The monitor array is a one-dimensional array; compute the offset
|
||||
* into the array */
|
||||
static inline int monitor_index(const struct echoaudio *chip, int out, int in)
|
||||
{
|
||||
return out * num_busses_in(chip) + in;
|
||||
}
|
||||
|
||||
|
||||
#ifndef pci_device
|
||||
#define pci_device(chip) (&chip->pci->dev)
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* _ECHOAUDIO_H_ */
|
||||
Reference in New Issue
Block a user