ASoC: tas2770: Insert post reset delay
commit 307f31452078792aab94a729fce33200c6e42dc4 upstream.
Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.
Fixes: 1a476abc72
("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:

committed by
Greg Kroah-Hartman

parent
9dcedbe943
commit
dc6faa0ede
@@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770_priv *tas2770)
|
|||||||
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
|
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
|
||||||
msleep(20);
|
msleep(20);
|
||||||
gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
|
gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
|
||||||
|
usleep_range(1000, 2000);
|
||||||
}
|
}
|
||||||
|
|
||||||
snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
|
snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
|
||||||
TAS2770_RST);
|
TAS2770_RST);
|
||||||
|
usleep_range(1000, 2000);
|
||||||
}
|
}
|
||||||
|
|
||||||
static int tas2770_set_bias_level(struct snd_soc_component *component,
|
static int tas2770_set_bias_level(struct snd_soc_component *component,
|
||||||
@@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct snd_soc_component *component)
|
|||||||
|
|
||||||
if (tas2770->sdz_gpio) {
|
if (tas2770->sdz_gpio) {
|
||||||
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
|
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
|
||||||
|
usleep_range(1000, 2000);
|
||||||
} else {
|
} else {
|
||||||
ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
|
ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
|
||||||
TAS2770_PWR_CTRL_MASK,
|
TAS2770_PWR_CTRL_MASK,
|
||||||
@@ -510,8 +513,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
|
|||||||
|
|
||||||
tas2770->component = component;
|
tas2770->component = component;
|
||||||
|
|
||||||
if (tas2770->sdz_gpio)
|
if (tas2770->sdz_gpio) {
|
||||||
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
|
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
|
||||||
|
usleep_range(1000, 2000);
|
||||||
|
}
|
||||||
|
|
||||||
tas2770_reset(tas2770);
|
tas2770_reset(tas2770);
|
||||||
|
|
||||||
|
Reference in New Issue
Block a user