Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

  Among the larger pieces:

   - Power management improvements for TI am335x and am437x (RTC
     suspend/wake)

   - Misc new additions for Amlogic (socinfo updates)

   - ZynqMP FPGA manager

   - Nvidia improvements for reset/powergate handling

   - PMIC wrapper for Mediatek MT8516

   - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  soc: aspeed: fix Kconfig
  soc: add aspeed folder and misc drivers
  spi: zynqmp: Fix build break
  soc: imx: Add generic i.MX8 SoC driver
  MAINTAINERS: Update email for Qualcomm SoC maintainer
  memory: tegra: Fix a typos for "fdcdwr2" mc client
  Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+"
  memory: tegra: Replace readl-writel with mc_readl-mc_writel
  memory: tegra: Fix integer overflow on tick value calculation
  memory: tegra: Fix missed registers values latching
  ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30
  optee: allow to work without static shared memory
  soc/tegra: pmc: Move powergate initialisation to probe
  soc/tegra: pmc: Remove reset sysfs entries on error
  soc/tegra: pmc: Fix reset sources and levels
  soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A
  soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask
  fpga manager: Adding FPGA Manager support for Xilinx zynqmp
  dt-bindings: fpga: Add bindings for ZynqMP fpga driver
  firmware: xilinx: Add fpga API's
  ...
This commit is contained in:
Linus Torvalds
2019-05-16 09:19:14 -07:00
71개의 변경된 파일1715개의 추가작업 그리고 432개의 파일을 삭제

파일 보기

@@ -10,6 +10,12 @@
#include <asm/suspend.h>
#include <linux/errno.h>
#include <linux/platform_data/pm33xx.h>
#include <linux/clk.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/wkup_m3_ipc.h>
#include <linux/of.h>
#include <linux/rtc.h>
#include "cm33xx.h"
#include "common.h"
@@ -38,6 +44,29 @@ static int am43xx_map_scu(void)
return 0;
}
static int am33xx_check_off_mode_enable(void)
{
if (enable_off_mode)
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
/* off mode not supported on am335x so return 0 always */
return 0;
}
static int am43xx_check_off_mode_enable(void)
{
/*
* Check for am437x-gp-evm which has the right Hardware design to
* support this mode reliably.
*/
if (of_machine_is_compatible("ti,am437x-gp-evm") && enable_off_mode)
return enable_off_mode;
else if (enable_off_mode)
pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");
return 0;
}
static int amx3_common_init(void)
{
gfx_pwrdm = pwrdm_lookup("gfx_pwrdm");
@@ -141,7 +170,9 @@ static int am43xx_suspend(unsigned int state, int (*fn)(unsigned long),
scu_power_mode(scu_base, SCU_PM_POWEROFF);
ret = cpu_suspend(args, fn);
scu_power_mode(scu_base, SCU_PM_NORMAL);
amx3_post_suspend_common();
if (!am43xx_check_off_mode_enable())
amx3_post_suspend_common();
return ret;
}
@@ -163,10 +194,48 @@ void __iomem *am43xx_get_rtc_base_addr(void)
return omap_hwmod_get_mpu_rt_va(rtc_oh);
}
static void am43xx_save_context(void)
{
}
static void am33xx_save_context(void)
{
omap_intc_save_context();
}
static void am33xx_restore_context(void)
{
omap_intc_restore_context();
}
static void am43xx_restore_context(void)
{
/*
* HACK: restore dpll_per_clkdcoldo register contents, to avoid
* breaking suspend-resume
*/
writel_relaxed(0x0, AM33XX_L4_WK_IO_ADDRESS(0x44df2e14));
}
static void am43xx_prepare_rtc_suspend(void)
{
omap_hwmod_enable(rtc_oh);
}
static void am43xx_prepare_rtc_resume(void)
{
omap_hwmod_idle(rtc_oh);
}
static struct am33xx_pm_platform_data am33xx_ops = {
.init = am33xx_suspend_init,
.soc_suspend = am33xx_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am33xx_save_context,
.restore_context = am33xx_restore_context,
.prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
.prepare_rtc_resume = am43xx_prepare_rtc_resume,
.check_off_mode_enable = am33xx_check_off_mode_enable,
.get_rtc_base_addr = am43xx_get_rtc_base_addr,
};
@@ -174,6 +243,11 @@ static struct am33xx_pm_platform_data am43xx_ops = {
.init = am43xx_suspend_init,
.soc_suspend = am43xx_suspend,
.get_sram_addrs = amx3_get_sram_addrs,
.save_context = am43xx_save_context,
.restore_context = am43xx_restore_context,
.prepare_rtc_suspend = am43xx_prepare_rtc_suspend,
.prepare_rtc_resume = am43xx_prepare_rtc_resume,
.check_off_mode_enable = am43xx_check_off_mode_enable,
.get_rtc_base_addr = am43xx_get_rtc_base_addr,
};

파일 보기

@@ -368,6 +368,9 @@ wait_emif_enable1:
mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
str r1, [r2, #0x0]
ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING]
blx r1
#ifdef CONFIG_CACHE_L2X0
ldr r2, l2_cache_base
ldr r0, [r2, #L2X0_CTRL]

파일 보기

@@ -10,6 +10,7 @@ menuconfig ARCH_TEGRA
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
select PM
select PM_OPP
select RESET_CONTROLLER
select SOC_BUS

파일 보기

@@ -61,7 +61,8 @@ static struct cpuidle_driver tegra_idle_driver = {
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
.flags = CPUIDLE_FLAG_COUPLED,
.flags = CPUIDLE_FLAG_COUPLED |
CPUIDLE_FLAG_TIMER_STOP,
.name = "powered-down",
.desc = "CPU power gated",
},
@@ -136,12 +137,8 @@ static bool tegra20_cpu_cluster_power_down(struct cpuidle_device *dev,
if (tegra20_reset_cpu_1() || !tegra_cpu_rail_off_ready())
return false;
tick_broadcast_enter();
tegra_idle_lp2_last();
tick_broadcast_exit();
if (cpu_online(1))
tegra20_wake_cpu1_from_reset();
@@ -153,14 +150,10 @@ static bool tegra20_idle_enter_lp2_cpu_1(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
tick_broadcast_enter();
cpu_suspend(0, tegra20_sleep_cpu_secondary_finish);
tegra20_cpu_clear_resettable();
tick_broadcast_exit();
return true;
}
#else

파일 보기

@@ -56,6 +56,7 @@ static struct cpuidle_driver tegra_idle_driver = {
.exit_latency = 2000,
.target_residency = 2200,
.power_usage = 0,
.flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "powered-down",
.desc = "CPU power gated",
},
@@ -76,12 +77,8 @@ static bool tegra30_cpu_cluster_power_down(struct cpuidle_device *dev,
return false;
}
tick_broadcast_enter();
tegra_idle_lp2_last();
tick_broadcast_exit();
return true;
}
@@ -90,14 +87,10 @@ static bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
tick_broadcast_enter();
smp_wmb();
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
tick_broadcast_exit();
return true;
}
#else

파일 보기

@@ -79,24 +79,15 @@
#define TEGRA_PMC_BASE 0x7000E400
#define TEGRA_PMC_SIZE SZ_256
#define TEGRA_MC_BASE 0x7000F000
#define TEGRA_MC_SIZE SZ_1K
#define TEGRA_EMC_BASE 0x7000F400
#define TEGRA_EMC_SIZE SZ_1K
#define TEGRA114_MC_BASE 0x70019000
#define TEGRA114_MC_SIZE SZ_4K
#define TEGRA_EMC0_BASE 0x7001A000
#define TEGRA_EMC0_SIZE SZ_2K
#define TEGRA_EMC1_BASE 0x7001A800
#define TEGRA_EMC1_SIZE SZ_2K
#define TEGRA124_MC_BASE 0x70019000
#define TEGRA124_MC_SIZE SZ_4K
#define TEGRA124_EMC_BASE 0x7001B000
#define TEGRA124_EMC_SIZE SZ_2K

파일 보기

@@ -44,8 +44,6 @@
#define EMC_XM2VTTGENPADCTRL 0x310
#define EMC_XM2VTTGENPADCTRL2 0x314
#define MC_EMEM_ARB_CFG 0x90
#define PMC_CTRL 0x0
#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */
@@ -420,22 +418,6 @@ _pll_m_c_x_done:
movweq r0, #:lower16:TEGRA124_EMC_BASE
movteq r0, #:upper16:TEGRA124_EMC_BASE
cmp r10, #TEGRA30
moveq r2, #0x20
movweq r4, #:lower16:TEGRA_MC_BASE
movteq r4, #:upper16:TEGRA_MC_BASE
cmp r10, #TEGRA114
moveq r2, #0x34
movweq r4, #:lower16:TEGRA114_MC_BASE
movteq r4, #:upper16:TEGRA114_MC_BASE
cmp r10, #TEGRA124
moveq r2, #0x20
movweq r4, #:lower16:TEGRA124_MC_BASE
movteq r4, #:upper16:TEGRA124_MC_BASE
ldr r1, [r5, r2] @ restore MC_EMEM_ARB_CFG
str r1, [r4, #MC_EMEM_ARB_CFG]
exit_self_refresh:
ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL
str r1, [r0, #EMC_XM2VTTGENPADCTRL]
@@ -564,7 +546,6 @@ tegra30_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
.word TEGRA_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra30_sdram_pad_address_end:
tegra114_sdram_pad_address:
@@ -581,7 +562,6 @@ tegra114_sdram_pad_address:
.word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c
.word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30
.word TEGRA114_MC_BASE + MC_EMEM_ARB_CFG @0x34
tegra114_sdram_pad_adress_end:
tegra124_sdram_pad_address:
@@ -593,7 +573,6 @@ tegra124_sdram_pad_address:
.word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14
.word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18
.word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c
.word TEGRA124_MC_BASE + MC_EMEM_ARB_CFG @0x20
tegra124_sdram_pad_address_end:
tegra30_sdram_pad_size: