Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
This commit is contained in:
Linus Torvalds
109
Documentation/input/walkera0701.txt
Normal file
109
Documentation/input/walkera0701.txt
Normal file
@@ -0,0 +1,109 @@
|
||||
|
||||
Walkera WK-0701 transmitter is supplied with a ready to fly Walkera
|
||||
helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use
|
||||
this transmitter as joystick
|
||||
|
||||
Devel homepage and download:
|
||||
http://zub.fei.tuke.sk/walkera-wk0701/
|
||||
|
||||
or use cogito:
|
||||
cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick
|
||||
|
||||
|
||||
Connecting to PC:
|
||||
|
||||
At back side of transmitter S-video connector can be found. Modulation
|
||||
pulses from processor to HF part can be found at pin 2 of this connector,
|
||||
pin 3 is GND. Between pin 3 and CPU 5k6 resistor can be found. To get
|
||||
modulation pulses to PC, signal pulses must be amplified.
|
||||
|
||||
Cable: (walkera TX to parport)
|
||||
|
||||
Walkera WK-0701 TX S-VIDEO connector:
|
||||
(back side of TX)
|
||||
__ __ S-video: canon25
|
||||
/ |_| \ pin 2 (signal) NPN parport
|
||||
/ O 4 3 O \ pin 3 (GND) LED ________________ 10 ACK
|
||||
( O 2 1 O ) | C
|
||||
\ ___ / 2 ________________________|\|_____|/
|
||||
| [___] | |/| B |\
|
||||
------- 3 __________________________________|________________ 25 GND
|
||||
E
|
||||
|
||||
|
||||
I use green LED and BC109 NPN transistor.
|
||||
|
||||
Software:
|
||||
|
||||
Build kernel with walkera0701 module. Module walkera0701 need exclusive
|
||||
access to parport, modules like lp must be unloaded before loading
|
||||
walkera0701 module, check dmesg for error messages. Connect TX to PC by
|
||||
cable and run jstest /dev/input/js0 to see values from TX. If no value can
|
||||
be changed by TX "joystick", check output from /proc/interrupts. Value for
|
||||
(usually irq7) parport must increase if TX is on.
|
||||
|
||||
|
||||
|
||||
Technical details:
|
||||
|
||||
Driver use interrupt from parport ACK input bit to measure pulse length
|
||||
using hrtimers.
|
||||
|
||||
Frame format:
|
||||
Based on walkera WK-0701 PCM Format description by Shaul Eizikovich.
|
||||
(downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf)
|
||||
|
||||
Signal pulses:
|
||||
(ANALOG)
|
||||
SYNC BIN OCT
|
||||
+---------+ +------+
|
||||
| | | |
|
||||
--+ +------+ +---
|
||||
|
||||
Frame:
|
||||
SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC ..
|
||||
|
||||
pulse length:
|
||||
Binary values: Analog octal values:
|
||||
|
||||
288 uS Binary 0 318 uS 000
|
||||
438 uS Binary 1 398 uS 001
|
||||
478 uS 010
|
||||
558 uS 011
|
||||
638 uS 100
|
||||
1306 uS SYNC 718 uS 101
|
||||
798 uS 110
|
||||
878 uS 111
|
||||
|
||||
24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits
|
||||
|
||||
(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
|
||||
to bin change or octal value to bin change).
|
||||
|
||||
Binary data representations:
|
||||
|
||||
One binary and octal value can be grouped to nibble. 24 nibbles + one binary
|
||||
values can be sampled between sync pulses.
|
||||
|
||||
Values for first four channels (analog joystick values) can be found in
|
||||
first 10 nibbles. Analog value is represented by one sign bit and 9 bit
|
||||
absolute binary value. (10 bits per channel). Next nibble is checksum for
|
||||
first ten nibbles.
|
||||
|
||||
Next nibbles 12 .. 21 represents four channels (not all channels can be
|
||||
directly controlled from TX). Binary representations ar the same as in first
|
||||
four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is
|
||||
checksum for nibbles 12..23.
|
||||
|
||||
After last octal value for nibble 24 and next sync pulse one additional
|
||||
binary value can be sampled. This bit and magic number is not used in
|
||||
software driver. Some details about this magic numbers can be found in
|
||||
Walkera_Wk-0701_PCM.pdf.
|
||||
|
||||
Checksum calculation:
|
||||
|
||||
Summary of octal values in nibbles must be same as octal value in checksum
|
||||
nibble (only first 3 bits are used). Binary value for checksum nibble is
|
||||
calculated by sum of binary values in checked nibbles + sum of octal values
|
||||
in checked nibbles divided by 8. Only bit 0 of this sum is used.
|
||||
|
||||
Reference in New Issue
Block a user