mac80211: separate encoding/bandwidth from flags

We currently use a lot of flags that are mutually incompatible,
separate this out into actual encoding and bandwidth enum values.

Much of this again done with spatch, with manual post-editing,
mostly to add the switch statements and get rid of the conversions.

@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_80MHZ
+status->bw = RATE_INFO_BW_80
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_40MHZ
+status->bw = RATE_INFO_BW_40
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_20MHZ
+status->bw = RATE_INFO_BW_20
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_160MHZ
+status->bw = RATE_INFO_BW_160
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_5MHZ
+status->bw = RATE_INFO_BW_5
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_10MHZ
+status->bw = RATE_INFO_BW_10

@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_VHT
+status->encoding = RX_ENC_VHT
@@
expression status;
@@
-status->enc_flags |= RX_ENC_FLAG_HT
+status->encoding = RX_ENC_HT
@@
expression status;
@@
-status.enc_flags |= RX_ENC_FLAG_VHT
+status.encoding = RX_ENC_VHT
@@
expression status;
@@
-status.enc_flags |= RX_ENC_FLAG_HT
+status.encoding = RX_ENC_HT

@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_HT)
+(status->encoding == RX_ENC_HT)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_VHT)
+(status->encoding == RX_ENC_VHT)

@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_5MHZ)
+(status->bw == RATE_INFO_BW_5)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_10MHZ)
+(status->bw == RATE_INFO_BW_10)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_40MHZ)
+(status->bw == RATE_INFO_BW_40)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_80MHZ)
+(status->bw == RATE_INFO_BW_80)
@@
expression status;
@@
-(status->enc_flags & RX_ENC_FLAG_160MHZ)
+(status->bw == RATE_INFO_BW_160)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net/mac80211/scan.c

@@ -79,9 +79,9 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 		bss_meta.signal = (rx_status->signal * 100) / local->hw.max_signal;
 
 	bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_20;
-	if (rx_status->enc_flags & RX_ENC_FLAG_5MHZ)
+	if (rx_status->bw == RATE_INFO_BW_5)
 		bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_5;
-	if (rx_status->enc_flags & RX_ENC_FLAG_10MHZ)
+	else if (rx_status->bw == RATE_INFO_BW_10)
 		bss_meta.scan_width = NL80211_BSS_CHAN_WIDTH_10;
 
 	bss_meta.chan = channel;
@@ -174,8 +174,8 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 	if (beacon) {
 		struct ieee80211_supported_band *sband =
 			local->hw.wiphy->bands[rx_status->band];
-		if (!(rx_status->enc_flags & RX_ENC_FLAG_HT) &&
-		    !(rx_status->enc_flags & RX_ENC_FLAG_VHT))
+		if (!(rx_status->encoding == RX_ENC_HT) &&
+		    !(rx_status->encoding == RX_ENC_VHT))
 			bss->beacon_rate =
 				&sband->bitrates[rx_status->rate_idx];
 	}