Merge tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 5.2 cycle.

* ad7150
  - sense of bit for controlling adaptive vs fixed threshold was flipped.
* adt7316
  - Fix a build issue due to wrong headers for gpio usage.
* lsm6dsx
  - correctly suspend / resume i2c slaves when the host goes to sleep.
* mlx90632
  - relax a compatability check to allow for newer devices.

Also one counters fix

* counter/ftm-quaddec
  - missing dependencies in Kconfig.

* tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -270,6 +270,7 @@ struct st_lsm6dsx_sensor {
  * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
  * @page_lock: Mutex to prevent concurrent memory page configuration.
  * @fifo_mode: FIFO operating mode supported by the device.
+ * @suspend_mask: Suspended sensor bitmask.
  * @enable_mask: Enabled sensor bitmask.
  * @ts_sip: Total number of timestamp samples in a given pattern.
  * @sip: Total number of samples (acc/gyro/ts) in a given pattern.
@@ -287,6 +288,7 @@ struct st_lsm6dsx_hw {
 	struct mutex page_lock;
 
 	enum st_lsm6dsx_fifo_mode fifo_mode;
+	u8 suspend_mask;
 	u8 enable_mask;
 	u8 ts_sip;
 	u8 sip;

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -1109,8 +1109,6 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 {
 	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
 	struct st_lsm6dsx_sensor *sensor;
-	const struct st_lsm6dsx_reg *reg;
-	unsigned int data;
 	int i, err = 0;
 
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
@@ -1121,12 +1119,16 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
-		reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-		data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
-		err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
-						    data);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, false);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, false);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask |= BIT(sensor->id);
 	}
 
 	if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS)
@@ -1146,12 +1148,19 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 			continue;
 
 		sensor = iio_priv(hw->iio_devs[i]);
-		if (!(hw->enable_mask & BIT(sensor->id)))
+		if (!(hw->suspend_mask & BIT(sensor->id)))
 			continue;
 
-		err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+		if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+		    sensor->id == ST_LSM6DSX_ID_EXT2)
+			err = st_lsm6dsx_shub_set_enable(sensor, true);
+		else
+			err = st_lsm6dsx_sensor_set_enable(sensor, true);
 		if (err < 0)
 			return err;
+
+		hw->suspend_mask &= ~BIT(sensor->id);
 	}
 
 	if (hw->enable_mask)

drivers/iio/temperature/mlx90632.c

@@ -81,6 +81,8 @@
 /* Magic constants */
 #define MLX90632_ID_MEDICAL	0x0105 /* EEPROM DSPv5 Medical device id */
 #define MLX90632_ID_CONSUMER	0x0205 /* EEPROM DSPv5 Consumer device id */
+#define MLX90632_DSP_VERSION	5 /* DSP version */
+#define MLX90632_DSP_MASK	GENMASK(7, 0) /* DSP version in EE_VERSION */
 #define MLX90632_RESET_CMD	0x0006 /* Reset sensor (address or global) */
 #define MLX90632_REF_12		12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
 #define MLX90632_REF_3		12LL /**< ResCtrlRef value of Channel 3 */
@@ -667,10 +669,13 @@ static int mlx90632_probe(struct i2c_client *client,
 	} else if (read == MLX90632_ID_CONSUMER) {
 		dev_dbg(&client->dev,
 			"Detected Consumer EEPROM calibration %x\n", read);
+	} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
+		dev_dbg(&client->dev,
+			"Detected Unknown EEPROM calibration %x\n", read);	
 	} else {
 		dev_err(&client->dev,
-			"EEPROM version mismatch %x (expected %x or %x)\n",
-			read, MLX90632_ID_CONSUMER, MLX90632_ID_MEDICAL);
+			"Wrong DSP version %x (expected %x)\n",
+			read, MLX90632_DSP_VERSION);
 		return -EPROTONOSUPPORT;
 	}