xiaomi-sm8450/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath10k: fix block comments style

Browse Source 
Fix output from checkpatch.pl like:
 Block comments use a trailing */ on a separate lin

Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Marcin Rokicki
2017-02-20 14:39:57 +01:00
committed by Kalle Valo
parent e871fb6396
commit d6dfe25c8b
10 changed files with 69 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

43
drivers/net/wireless/ath/ath10k/mac.c
View File

@@ -457,7 +457,8 @@ static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
for (;;) {
/* since ath10k_install_key we can't hold data_lock all the
* time, so we try to remove the keys incrementally */
* time, so we try to remove the keys incrementally
*/
spin_lock_bh(&ar->data_lock);
i = 0;
list_for_each_entry(peer, &ar->peers, list) {
@@ -609,7 +610,8 @@ static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
case 2:
case 3:
/* Our lower layer calculations limit our precision to
1 microsecond */
* 1 microsecond
*/
return 1;
case 4:
return 2;
@@ -978,7 +980,8 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id)
arg.channel.band_center_freq2 = chandef->center_freq2;
/* TODO setup this dynamically, what in case we
don't have any vifs? */
* don't have any vifs?
*/
arg.channel.mode = chan_to_phymode(chandef);
arg.channel.chan_radar =
!!(channel->flags & IEEE80211_CHAN_RADAR);
@@ -2373,9 +2376,10 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar,
}
/* TODO setup this based on STA listen interval and
beacon interval. Currently we don't know
sta->listen_interval - mac80211 patch required.
Currently use 10 seconds */
* beacon interval. Currently we don't know
* sta->listen_interval - mac80211 patch required.
* Currently use 10 seconds
*/
ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr,
WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
10);
@@ -2480,7 +2484,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
/* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to
* zero in VHT IE. Using it would result in degraded throughput.
* arg->peer_max_mpdu at this point contains HT max_mpdu so keep
* it if VHT max_mpdu is smaller. */
* it if VHT max_mpdu is smaller.
*/
arg->peer_max_mpdu = max(arg->peer_max_mpdu,
(1U << (IEEE80211_HT_MAX_AMPDU_FACTOR +
ampdu_factor)) - 1);
@@ -2793,7 +2798,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
}
/* ap_sta must be accessed only within rcu section which must be left
* before calling ath10k_setup_peer_smps() which might sleep. */
* before calling ath10k_setup_peer_smps() which might sleep.
*/
ht_cap = ap_sta->ht_cap;
vht_cap = ap_sta->vht_cap;
@@ -3064,7 +3070,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
/* FIXME: why use only legacy modes, why not any
* HT/VHT modes? Would that even make any
* difference? */
* difference?
*/
if (channel->band == NL80211_BAND_2GHZ)
ch->mode = MODE_11G;
else
@@ -3128,7 +3135,8 @@ static void ath10k_regd_update(struct ath10k *ar)
}
/* Target allows setting up per-band regdomain but ath_common provides
* a combined one only */
* a combined one only
*/
ret = ath10k_wmi_pdev_set_regdomain(ar,
regpair->reg_domain,
regpair->reg_domain, /* 2ghz */
@@ -3677,7 +3685,8 @@ void ath10k_offchan_tx_work(struct work_struct *work)
* never transmitted. We delete the peer upon tx completion.
* It is unlikely that a peer for offchannel tx will already be
* present. However it may be in some rare cases so account for that.
* Otherwise we might remove a legitimate peer and break stuff. */
* Otherwise we might remove a legitimate peer and break stuff.
*/
for (;;) {
skb = skb_dequeue(&ar->offchan_tx_queue);
@@ -5717,7 +5726,8 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
}
/* the peer should not disappear in mid-way (unless FW goes awry) since
* we already hold conf_mutex. we just make sure its there now. */
* we already hold conf_mutex. we just make sure its there now.
*/
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
spin_unlock_bh(&ar->data_lock);
@@ -5729,8 +5739,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
ret = -EOPNOTSUPP;
goto exit;
} else {
/* if the peer doesn't exist there is no key to disable
* anymore */
/* if the peer doesn't exist there is no key to disable anymore */
goto exit;
}
}
@@ -6589,7 +6598,8 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
long time_left;
/* mac80211 doesn't care if we really xmit queued frames or not
* we'll collect those frames either way if we stop/delete vdevs */
* we'll collect those frames either way if we stop/delete vdevs
*/
if (drop)
return;
@@ -6640,7 +6650,8 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
mutex_lock(&ar->conf_mutex);
/* If device failed to restart it will be in a different state, e.g.
* ATH10K_STATE_WEDGED */
* ATH10K_STATE_WEDGED
*/
if (ar->state == ATH10K_STATE_RESTARTED) {
ath10k_info(ar, "device successfully recovered\n");
ar->state = ATH10K_STATE_ON;