Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Summary:
   - Add device tree support for DoC3

   - SPI NOR:
        Refactoring, for better layering between spi-nor.c and its
        driver users (e.g., m25p80.c)

        New flash device support

        Support 6-byte ID strings

   - NAND:
        New NAND driver for Allwinner SoC's (sunxi)

        GPMI NAND: add support for raw (no ECC) access, for testing
        purposes

        Add ATO manufacturer ID

        A few odd driver fixes

   - MTD tests:
        Allow testers to compensate for OOB bitflips in oobtest

        Fix a torturetest regression

   - nandsim: Support longer ID byte strings

  And more"

* tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits)
  mtd: tests: abort torturetest on erase errors
  mtd: physmap_of: fix potential NULL dereference
  mtd: spi-nor: allow NULL as chip name and try to auto detect it
  mtd: nand: gpmi: add raw oob access functions
  mtd: nand: gpmi: add proper raw access support
  mtd: nand: gpmi: add gpmi_copy_bits function
  mtd: spi-nor: factor out write_enable() for erase commands
  mtd: spi-nor: add support for s25fl128s
  mtd: spi-nor: remove the jedec_id/ext_id
  mtd: spi-nor: add id/id_len for flash_info{}
  mtd: nand: correct the comment of function nand_block_isreserved()
  jffs2: Drop bogus if in comment
  mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy
  mtd: cafe_nand: drop duplicate .write_page implementation
  mtd: m25p80: Add support for serial flash Spansion S25FL132K
  MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids
  mtd: spi-nor: improve wait-till-ready timeout loop
  mtd: delete unnecessary checks before two function calls
  mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  mtd: nand: add ATO manufacturer info
  ...

Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -5,7 +5,9 @@ Required properties:
 - reg : should specify localbus address and size used for the chip,
 	and hardware ECC controller if available.
 	If the hardware ECC is PMECC, it should contain address and size for
-	PMECC, PMECC Error Location controller and ROM which has lookup tables.
+	PMECC and PMECC Error Location controller.
+	The PMECC lookup table address and size in ROM is optional. If not
+	specified, driver will build it in runtime.
 - atmel,nand-addr-offset : offset for the address latch.
 - atmel,nand-cmd-offset : offset for the command latch.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
@@ -27,7 +29,7 @@ Optional properties:
   are: 512, 1024.
 - atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
   for different sector size. First one is for sector size 512, the next is for
-  sector size 1024.
+  sector size 1024. If not specified, driver will build the table in runtime.
 - nand-bus-width : 8 or 16 bus width if not present 8
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
 - Nand Flash Controller(NFC) is a slave driver under Atmel nand flash

Documentation/devicetree/bindings/mtd/diskonchip.txt

@@ -0,0 +1,15 @@
+M-Systems and Sandisk DiskOnChip devices
+
+M-System DiskOnChip G3
+======================
+The Sandisk (formerly M-Systems) docg3 is a nand device of 64M to 256MB.
+
+Required properties:
+ - compatible: should be "m-systems,diskonchip-g3"
+ - reg: register base and size
+
+Example:
+	docg3: flash@0 {
+		compatible = "m-systems,diskonchip-g3";
+		reg = <0x0 0x2000>;
+	};

Documentation/devicetree/bindings/mtd/gpio-control-nand.txt

@@ -11,8 +11,8 @@ Required properties:
   are made in native endianness.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
   representing partitions.
-- gpios : specifies the gpio pins to control the NAND device.  nwp is an
-  optional gpio and may be set to 0 if not present.
+- gpios : Specifies the GPIO pins to control the NAND device.  The order of
+  GPIO references is:  RDY, nCE, ALE, CLE, and an optional nWP.
 
 Optional properties:
 - bank-width : Width (in bytes) of the device.  If not present, the width
@@ -35,11 +35,11 @@ gpio-nand@1,0 {
 	reg = <1 0x0000 0x2>;
 	#address-cells = <1>;
 	#size-cells = <1>;
-	gpios = <&banka 1 0	/* rdy */
-		 &banka 2 0 	/* nce */
-		 &banka 3 0 	/* ale */
-		 &banka 4 0 	/* cle */
-		 0		/* nwp */>;
+	gpios = <&banka 1 0>,	/* RDY */
+		<&banka 2 0>, 	/* nCE */
+		<&banka 3 0>, 	/* ALE */
+		<&banka 4 0>, 	/* CLE */
+		<0>;		/* nWP */
 
 	partition@0 {
 	...

Documentation/devicetree/bindings/mtd/sunxi-nand.txt

@@ -0,0 +1,45 @@
+Allwinner NAND Flash Controller (NFC)
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-nand".
+- reg : shall contain registers location and length for data and reg.
+- interrupts : shall define the nand controller interrupt.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- clocks : shall reference nand controller clocks.
+- clock-names : nand controller internal clock names. Shall contain :
+    * "ahb" : AHB gating clock
+    * "mod" : nand controller clock
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Optional properties:
+- allwinner,rb : shall contain the native Ready/Busy ids.
+ or
+- rb-gpios : shall contain the gpios used as R/B pins.
+- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
+  "soft_bch" or "none")
+
+see Documentation/devicetree/mtd/nand.txt for generic bindings.
+
+
+Examples:
+nfc: nand@01c03000 {
+	compatible = "allwinner,sun4i-a10-nand";
+	reg = <0x01c03000 0x1000>;
+	interrupts = <0 37 1>;
+	clocks = <&ahb_gates 13>, <&nand_clk>;
+	clock-names = "ahb", "mod";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "soft_bch";
+	};
+};