Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

arch/arm/mach-omap2/control.c

@@ -315,15 +315,15 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.boot_config_ptr = 0x0;
 	if (cpu_is_omap3630())
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore_3630);
+			__pa_symbol(omap3_restore_3630);
 	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 					omap_rev() != OMAP3430_REV_ES3_1 &&
 					omap_rev() != OMAP3430_REV_ES3_1_2)
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore);
+			__pa_symbol(omap3_restore);
 	else
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(omap3_restore_es3);
+			__pa_symbol(omap3_restore_es3);
 
 	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 		scratchpad_contents.secure_ram_restore_ptr = 0x0;
@@ -395,7 +395,7 @@ void omap3_save_scratchpad_contents(void)
 	sdrc_block_contents.flags = 0x0;
 	sdrc_block_contents.block_size = 0x0;
 
-	arm_context_addr = virt_to_phys(omap3_arm_context);
+	arm_context_addr = __pa_symbol(omap3_arm_context);
 
 	/* Copy all the contents to the scratchpad location */
 	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -273,7 +273,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	cpu_clear_prev_logic_pwrst(cpu);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
 	pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
-	set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.resume));
+	set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.resume));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 	l2x0_pwrst_prepare(cpu, save_state);
 
@@ -325,7 +325,7 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 
 	pwrdm_clear_all_prev_pwrst(pm_info->pwrdm);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
-	set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart));
+	set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.hotplug_restart));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 
 	/*
@@ -467,13 +467,13 @@ void __init omap4_mpuss_early_init(void)
 	sar_base = omap4_get_sar_ram_base();
 
 	if (cpu_is_omap443x())
-		startup_pa = virt_to_phys(omap4_secondary_startup);
+		startup_pa = __pa_symbol(omap4_secondary_startup);
 	else if (cpu_is_omap446x())
-		startup_pa = virt_to_phys(omap4460_secondary_startup);
+		startup_pa = __pa_symbol(omap4460_secondary_startup);
 	else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
-		startup_pa = virt_to_phys(omap5_secondary_hyp_startup);
+		startup_pa = __pa_symbol(omap5_secondary_hyp_startup);
 	else
-		startup_pa = virt_to_phys(omap5_secondary_startup);
+		startup_pa = __pa_symbol(omap5_secondary_startup);
 
 	if (cpu_is_omap44xx())
 		writel_relaxed(startup_pa, sar_base +

arch/arm/mach-omap2/omap-smp.c

@@ -316,9 +316,9 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
-		omap_auxcoreboot_addr(virt_to_phys(cfg.startup_addr));
+		omap_auxcoreboot_addr(__pa_symbol(cfg.startup_addr));
 	else
-		writel_relaxed(virt_to_phys(cfg.startup_addr),
+		writel_relaxed(__pa_symbol(cfg.startup_addr),
 			       base + OMAP_AUX_CORE_BOOT_1);
 }