phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
Northstar is a family of SoCs used in home routers. They have USB 2.0 and 3.0 controllers with PHYs that need to be properly initialized. This driver provides PHY init support in a generic way and can be bound with an EHCI controller driver. There are (just a few) registers being defined in bcma header. It's because DMU/CRU registers will be also needed in other drivers. We will need them e.g. in PCIe controller/PHY driver and at some point probably in clock driver for BCM53573 chipset. By using include/linux/bcma/ we avoid code duplication. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:

committed by
Kishon Vijay Abraham I

parent
444525d4f5
commit
d3feb40673
@@ -4,6 +4,7 @@
|
||||
#include <linux/pci.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
|
||||
#include <linux/bcma/bcma_driver_arm_c9.h>
|
||||
#include <linux/bcma/bcma_driver_chipcommon.h>
|
||||
#include <linux/bcma/bcma_driver_pci.h>
|
||||
#include <linux/bcma/bcma_driver_pcie2.h>
|
||||
|
15
include/linux/bcma/bcma_driver_arm_c9.h
Normal file
15
include/linux/bcma/bcma_driver_arm_c9.h
Normal file
@@ -0,0 +1,15 @@
|
||||
#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_
|
||||
#define LINUX_BCMA_DRIVER_ARM_C9_H_
|
||||
|
||||
/* DMU (Device Management Unit) */
|
||||
#define BCMA_DMU_CRU_USB2_CONTROL 0x0164
|
||||
#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC
|
||||
#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2
|
||||
#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000
|
||||
#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12
|
||||
#define BCMA_DMU_CRU_CLKSET_KEY 0x0180
|
||||
#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0
|
||||
#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010
|
||||
#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000
|
||||
|
||||
#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */
|
Reference in New Issue
Block a user