microblaze/nommu: use the generic uncached segment support

Stop providing our own arch alloc/free hooks for nommu platforms and
just expose the segment offset and use the generic dma-direct
allocator.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arch/microblaze/Kconfig

@@ -5,9 +5,11 @@ config MICROBLAZE
 	select ARCH_NO_SWAP
 	select ARCH_HAS_BINFMT_FLAT if !MMU
 	select ARCH_HAS_DMA_COHERENT_TO_PFN if MMU
+	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_UNCACHED_SEGMENT if !MMU
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_NO_COHERENT_DMA_MMAP if !MMU
 	select ARCH_WANT_IPC_PARSE_VERSION

arch/microblaze/mm/consistent.c

@@ -42,21 +42,48 @@
 #include <asm/cpuinfo.h>
 #include <asm/tlbflush.h>
 
-#ifndef CONFIG_MMU
+void arch_dma_prep_coherent(struct page *page, size_t size)
-/* I have to use dcache values because I can't relate on ram size */
+{
-# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+	phys_addr_t paddr = page_to_phys(page);
-#endif
 
+	flush_dcache_range(paddr, paddr + size);
+}
+
+#ifndef CONFIG_MMU
 /*
- * Consistent memory allocators. Used for DMA devices that want to
+ * Consistent memory allocators. Used for DMA devices that want to share
- * share uncached memory with the processor core.
+ * uncached memory with the processor core.  My crufty no-MMU approach is
- * My crufty no-MMU approach is simple. In the HW platform we can optionally
+ * simple.  In the HW platform we can optionally mirror the DDR up above the
- * mirror the DDR up above the processor cacheable region.  So, memory accessed
+ * processor cacheable region.  So, memory accessed in this mirror region will
- * in this mirror region will not be cached.  It's alloced from the same
+ * not be cached.  It's alloced from the same pool as normal memory, but the
- * pool as normal memory, but the handle we return is shifted up into the
+ * handle we return is shifted up into the uncached region.  This will no doubt
- * uncached region.  This will no doubt cause big problems if memory allocated
+ * cause big problems if memory allocated here is not also freed properly. -- JW
- * here is not also freed properly. -- JW
+ *
+ * I have to use dcache values because I can't relate on ram size:
  */
+#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+#else
+#define UNCACHED_SHADOW_MASK 0
+#endif /* CONFIG_XILINX_UNCACHED_SHADOW */
+
+void *uncached_kernel_address(void *ptr)
+{
+	unsigned long addr = (unsigned long)ptr;
+
+	addr |= UNCACHED_SHADOW_MASK;
+	if (addr > cpuinfo.dcache_base && addr < cpuinfo.dcache_high)
+		pr_warn("ERROR: Your cache coherent area is CACHED!!!\n");
+	return (void *)addr;
+}
+
+void *cached_kernel_address(void *ptr)
+{
+	unsigned long addr = (unsigned long)ptr;
+
+	return (void *)(addr & ~UNCACHED_SHADOW_MASK);
+}
+#else /* CONFIG_MMU */
 void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		gfp_t gfp, unsigned long attrs)
 {
@@ -64,12 +91,9 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	void *ret;
 	unsigned int i, err = 0;
 	struct page *page, *end;
-
-#ifdef CONFIG_MMU
 	phys_addr_t pa;
 	struct vm_struct *area;
 	unsigned long va;
-#endif
 
 	if (in_interrupt())
 		BUG();
@@ -86,26 +110,8 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	 * we need to ensure that there are no cachelines in use,
 	 * or worse dirty in this area.
 	 */
-	flush_dcache_range(virt_to_phys((void *)vaddr),
+	arch_dma_prep_coherent(virt_to_page((unsigned long)vaddr), size);
-					virt_to_phys((void *)vaddr) + size);
 
-#ifndef CONFIG_MMU
-	ret = (void *)vaddr;
-	/*
-	 * Here's the magic!  Note if the uncached shadow is not implemented,
-	 * it's up to the calling code to also test that condition and make
-	 * other arranegments, such as manually flushing the cache and so on.
-	 */
-# ifdef CONFIG_XILINX_UNCACHED_SHADOW
-	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
-# endif
-	if ((unsigned int)ret > cpuinfo.dcache_base &&
-				(unsigned int)ret < cpuinfo.dcache_high)
-		pr_warn("ERROR: Your cache coherent area is CACHED!!!\n");
-
-	/* dma_handle is same as physical (shadowed) address */
-	*dma_handle = (dma_addr_t)ret;
-#else
 	/* Allocate some common virtual space to map the new pages. */
 	area = get_vm_area(size, VM_ALLOC);
 	if (!area) {
@@ -117,7 +123,6 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 
 	/* This gives us the real physical address of the first page. */
 	*dma_handle = pa = __virt_to_phys(vaddr);
-#endif
 
 	/*
 	 * free wasted pages.  We skip the first page since we know
@@ -131,10 +136,8 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	split_page(page, order);
 
 	for (i = 0; i < size && err == 0; i += PAGE_SIZE) {
-#ifdef CONFIG_MMU
 		/* MS: This is the whole magic - use cache inhibit pages */
 		err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE);
-#endif
 
 		SetPageReserved(page);
 		page++;
@@ -154,7 +157,6 @@ void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	return ret;
 }
 
-#ifdef CONFIG_MMU
 static pte_t *consistent_virt_to_pte(void *vaddr)
 {
 	unsigned long addr = (unsigned long)vaddr;
@@ -172,7 +174,6 @@ long arch_dma_coherent_to_pfn(struct device *dev, void *vaddr,
 
 	return pte_pfn(*ptep);
 }
-#endif
 
 /*
  * free page(s) as defined by the above mapping.
@@ -187,18 +188,6 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 
 	size = PAGE_ALIGN(size);
 
-#ifndef CONFIG_MMU
-	/* Clear SHADOW_MASK bit in address, and free as per usual */
-# ifdef CONFIG_XILINX_UNCACHED_SHADOW
-	vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
-# endif
-	page = virt_to_page(vaddr);
-
-	do {
-		__free_reserved_page(page);
-		page++;
-	} while (size -= PAGE_SIZE);
-#else
 	do {
 		pte_t *ptep = consistent_virt_to_pte(vaddr);
 		unsigned long pfn;
@@ -216,5 +205,5 @@ void arch_dma_free(struct device *dev, size_t size, void *vaddr,
 
 	/* flush tlb */
 	flush_tlb_all();
-#endif
 }
+#endif /* CONFIG_MMU */